Category

Optics Accessories
Showing results for "ruger 10 22 scope silver"
Results 1 - 40 of 1036

Power Custom 1-Piece...

$15.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/power-custom-1piece/Gnhx-Su25RFf9zIsg75nbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Weaver-style Base mounts to the receiver of your rifle with no gunsmithing required. Much better than using tip-off rings if you're mounting a target-style scope. Does not fit Ruger 10/22 Magnum. Technical Information Material: Aluminum Style: Weaver Fits: Ruger 10/22 Notes: Attaches to the factory pre-drilled and tapped holes in the 10/22 receiver. Measures 4.875x.875x.350 Mounting hardware included.
More

Ruger 1-Piece Tip-Off...

$12.99
MidwayUSA Ruger 1-Piece Tip-Off Weaver-Style Scope Base Ruger 10/22 Silver
+ $4.99 shipping
/ruger-1piece-tipoff/kjIgy4wtqaB0b-b_6zyP1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This scope base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Notes: Mounting Hardware Included
More

Weigand Integramount Scope...

$62.99
MidwayUSA Weigand Integramount Scope Base with Integral 1 Rings Ruger 10/22 Silver
+ $4.99 shipping
/weigand-integramount/VJ1FrTSKTl4AToXxn4k7QQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece base places the scope in perfect alignment with the rings so they can't pinch or torque and damage your expensive scope. The ultra-strong aluminum design attaches in seconds to the Ruger 10/22 factory hole spacing with screws (included). Rings accept 1 scopes with objective lenses up to 40mm.Technical InformationMateri al: Aluminum Style: Intergral Fits: Ruger 10/22 Notes: Intergral Rings are .225 and accept 1 Scopes. Mounting Hardware Included
More

Power Custom 1-Piece...

$15.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/power-custom-1piece/Gnhx-Su25RFf9zIsg75nbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Weaver-style Base mounts to the receiver of your rifle with no gunsmithing required. Much better than using tip-off rings if you're mounting a target-style scope. Does not fit Ruger 10/22 Magnum. Technical Information Material: Aluminum Style: Weaver Fits: Ruger 10/22 Notes: Attaches to the factory pre-drilled and tapped holes in the 10/22 receiver. Measures 4.875x.875x.350 Mounting hardware included.
More

Ruger 10/22 Base Scope Mount...

$18.95
eBay Ruger 10/22 Base Scope Mount Dovetail & Silver Device Anodized W/set Screw
Free Shipping
/ruger-1022-base-scope/fnH1cwauBRWivCaA-VZ2CA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ruger 10/22 Base Scope Mount Dovetail Silver Device Anodized w/Set Screw Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Ruger 10/22 Device ( will work for Standard Ruger 10/22 only, not for Bull) Brand New Designed Ruger 10/22 Aluminum Tactical Device , give your 10/22 a new unique looking and better control , set screw made by steel to maxinum the strength of the connection. Three holes on top for air flow , over 1000 rounds tested in the fiel
More

Volquartsen 1-Piece Barrel...

$32.99
MidwayUSA Volquartsen 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/volquartsen-1piece/HmPp5XUpL3xUF110BebkpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This cantilever-style barrel-mounted base drops-in on all Volquartsen Ruger 10/22 barrels. The scope is mounted to the barrel rather than to the flexible alloy receiver. It is the ultimate scope mounting system for a Ruger 10/22. Uses Weaver-Style rings. May be adapted to other barrels by drilling and tapping the barrel.Technical InformationMateri al: Aluminum Style: Weaver Fits: Volquartsen 10/22 barrels of .920 diameter Will fit other .920 barrels, but requires drilling and tapping barrel Gunsmithing Required:No for Volquartsen barrels Notes: The mount is equipped with supporting set screw to eliminate flex found in most other barrel mounts The mount extends all the way back over the recevier to facilitate any necessary scope adjustments Mounting hardware included Includes 2 8-32 x 1/4... Less
More

Tactical Solutions Ruger...

$33.99
Brownells Tactical Solutions Ruger 10/22 Picatinny Scope Mount - 15 Moa Scope Mount
+ $7.95 shipping
/tactical-solutions-ruger/Ksbr-yAdANYADUkwX2dzhw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5⁄8 (11.7cm) long, 13⁄16 (2.1cm) wide, 11⁄32 (8.7mm) high from top of receiver.
More

Warne Maxima 2-Piece Steel...

$26.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Ruger 10/22 Silver
+ $4.99 shipping
/warne-maxima-2piece/UMfwgUye32s4Pd_UyNDoWg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

Tactical Solutions Ruger...

$36.99
Brownells Tactical Solutions Ruger 10/22 Picatinny Scope Mount - 0 Moa Scope Mount
+ $7.95 shipping
/tactical-solutions-ruger/oAdqDs286-jF_h049EVRRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5⁄8 (11.7cm) long, 13⁄16 (2.1cm) wide, 11⁄32 (8.7mm) high from top of receiver.
More

Power Custom Ruger 10/22...

$14.99
Brownells Power Custom Ruger 10/22 Receiver Mount - Silver 10/22 Receiver Mount
+ $7.95 shipping
/power-custom-ruger-1022/AomJ1NO10Bulg4RoaahBpA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Quickly attaches to factory drilled and tapped 10/22 receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver. Mfg: Power Custom SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75 (12cm) long. Includes screws and Allen wrench.
More

Ruger 1-Piece Tip-Off...

$9.99
MidwayUSA Ruger 1-Piece Tip-Off Weaver-Style Scope Base Ruger 10/22 Matte
+ $4.99 shipping
/ruger-1piece-tipoff/U3HofAUY0t7KC8l4DFX8lw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This scope base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Notes: Mounting Hardware Included
More

Weigand Integramount Scope...

$62.99
MidwayUSA Weigand Integramount Scope Base with Integral 1 Rings Ruger 10/22 Matte
+ $4.99 shipping
/weigand-integramount/wYz6qSpBWYkppHKGyyGd-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece base places the scope in perfect alignment with the rings so they can't pinch or torque and damage your expensive scope. The ultra-strong aluminum design attaches in seconds to the Ruger 10/22 factory hole spacing with screws (included). Rings accept 1 scopes with objective lenses up to 40mm.Technical InformationMateri al: Aluminum Style: Intergral Fits: Ruger 10/22 Notes: Intergral Rings are .225 and accept 1 Scopes. Mounting Hardware Included
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77/22 with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/5SMLKc_hHLC9Y7PmATIj6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Fits Ruger 77/22 (.22 LR/.22 WMR) or 77/17 (.17 HMR). Mounting hardware includedTechnical InformationMateri al: AluminumStyle: Weaver (cross-slot)
More

S&K Insta-Mount Scope Bases -...

$66.99
Brownells S&K Insta-Mount Scope Bases - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/sk-instamount-scope/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/fnE_OkVeBUBEgHyIH8zZWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weiganf Ruger Mini 14 Scope Mount increases your scope options when you install this lightweight, rail on your Mini 14 Ranch Rifle. Lets you mount mini or short length scopes as well as red dots without permanent modifications or Gunsmithing. Keeps the scope low over the centerline of the receiver to maintain optimum eye and scope alignment. This scope mount also has an enhanced ejection scallop for improved brass ejection. Multiple cross slots allow adjustment for maximum eye relief. Accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. 5 long, weighs 2.6 ounces. Technical InformationMateri al: AluminumStyle: Weaver (cross-slot)Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes:... Less
More

Weigand 1-Piece...

$26.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger 10/22 Matte
+ $4.99 shipping
/weigand-1piece/LCEfhX0itSey-211sAoHXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Notes: Mounting Hardware Included
More

Egw Lightweight Tactical...

$39.99
Brownells Egw Lightweight Tactical Scope Base - Ruger American Short Action 0 Moa
+ $7.95 shipping
/egw-lightweight-tactical/jOVjYEEuXdcEbwRzytUwrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77/22 with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Oc1dtnjonDeULgCX2ULZXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Fits Ruger 77/22 (.22 LR/.22 WMR) or 77/17 (.17 HMR). Mounting hardware includedTechnical InformationMateri al: AluminumStyle: Weaver (cross-slot)
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Redhawk with Integral Scope Mounting Notches Machined in Barrel Silver
+ $4.99 shipping
/weigand-1piece/djH-M5E4HnI5zGCwKW_dlg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weigand Ruger Redhawk mount is constructed of a lightweight aluminum and is a non drill and tap mount. This base is designed for old and new models that have factory scope ring cuts in the barrel of the pistol and accepts weaver-style rings and most picatinny-style rings. Technical Information Material: Aluminum Style: Weaver (cross-slot) Fits: Ruger Redhawks with Ruger scope ring cuts on the barrel Notes: Mounting Hardware Included This is a base only
More

Bolt-on Scope Mount Rail For...

$14.14
eBay Bolt-on Scope Mount Rail For Ruger 10/22 Rifles With Screws
Free Shipping
/bolton-scope-mount-rail/_B1eMUXQN97yUl0iSvOw7A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Tactical Rail Scope Mount With Mounting Screws This Item Fits Ruger 10/22 Rifles Attaches to Ruger 10/22 rifles that have been drilled and tapped at the factory on the top with 4 screw holes to accept a scope mount.This tactical mount provides a mounting rail that will fit most Weaver/Picatinny style scopes and accessories. Provides 11 cross slots for adjusting your optics. Bolts directly to the factory screw holes on your 10/22 rifle.Easy bolt on installation with included screws Length: 4.75,
More

Egw Lightweight Tactical...

$39.99
Brownells Egw Lightweight Tactical Scope Base - Ruger American Rimfire 0 Moa
+ $7.95 shipping
/egw-lightweight-tactical/mUmq0eAhhoxiDcqe_r-Zrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/wCdPg2VcIE3QBHziDjQLYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weiganf Ruger Mini 14 Scope Mount increases your scope options when you install this lightweight, rail on your Mini 14 Ranch Rifle. Lets you mount mini or short length scopes as well as red dots without permanent modifications or Gunsmithing. Keeps the scope low over the centerline of the receiver to maintain optimum eye and scope alignment. This scope mount also has an enhanced ejection scallop for improved brass ejection. Multiple cross slots allow adjustment for maximum eye relief. Accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. 5 long, weighs 2.6 ounces. Technical InformationMateri al: AluminumStyle: Weaver (cross-slot)Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes:... Less
More

Weigand 1-Piece Weaver-Style...

$69.95
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77 Short Action Silver
+ $4.99 shipping
/weigand-1piece/-r-ykIDMAQSK-FEAqx1Ecw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Model 77 Short Actions Mounting Hardware Included
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77/44 with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/3YeV1v7pWRoYW5aHHGFhgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Notes: Mounting Hardware Included
More

Weigand 1-Piece Weaver-Style...

$19.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mark II Silver
+ $4.99 shipping
/weigand-1piece/CNNZdPiB26Uh71gceYZAQA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings (except Burris Z-Rings) and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mark 2 that has been drilled and tapped Notes: Mounting Hardware Included
More

PTG Receiver Drilling Fixture...

$43.99
MidwayUSA PTG Receiver Drilling Fixture Ruger 10/22
+ $7.59 shipping
/ptg-receiver-drilling/MPpXaFQ1HsAKDnVvqGVIzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drilling jig permits cleaning a 10/22 from the rear without removing the barrel. It locates the correct spot on the rear of the receiver for a hole to be drilled that allows the cleaning rod to pass through. Helps keep the rifle accurate by eliminating damage done by the cleaning rod when inserted through the muzzle. Technical InformationNotes: 4 long, steel Locates cleaning hole location in receiver. Permits cleaning from the rear without barrel removal. Requires that a hole be drilled in the rear of the receiver. Instructions: Remove the two bolts and fiber washers from the fixture. The 10/22 receiver must be completely disassembled with all parts removed, however the barrel can stay in the receiver. The fixture mounts to the right side of the receiver. Use some suitable material... Less
More

Leupold Rifleman Base Ruger...

$10.10
eBay Leupold Rifleman Base Ruger 10/22 (1pc), Silver-57774
No Shipping Info
/leupold-rifleman-base/-hy75SiChc27Qf3iBcnoBA==/info
eBay
IN_STOCK ( In stock )
Leupold Rifleman Base Ruger 10/22 (1pc), Silver Click Thumbnails to Enlarge The Leupold Rifleman scope bases are precision- machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. The 2-Piece design offers more mounting flexibility and accessibility to the breech of your rifle. Bases will work with any Weaver-Style rings.Leupold Rifleman Scope Base Specifications:- Fits: Ruger 10/22 - Base Style: Rifleman - Base Typ
More

Tactical Solutions Ruger...

$33.00
eBay Tactical Solutions Ruger 10/22 4.6 Standard Scope Base Picatinny Rail Mount
No Shipping Info
/tactical-solutions-ruger/TOpRgaPh1batKamaKPRQgQ==/info
eBay
IN_STOCK ( In stock )
 Tactical Solutions Ruger 10/22 4.6 Standard Scope Base Picatinny Rail Mount The Tactical Solutions 10/22 Scope Rail is perfect for mounting your optics on your 10/22. Our precision machined aluminum scope rail will accommodate any picatinny/weaver style of scope rings and comes with four mounting screws. Length is 4.6″Brand: Tactical Solutions Condition: New Type: Scope Base Model: 10/22 Base MPN: 1022 SCPRL-02 For Gun Make: Ruger For Gun Model: 10/22 Country of Manufacture: United State
More

Leupold 1-Piece Standard...

$20.99
MidwayUSA Leupold 1-Piece Standard Scope Base Ruger 10/22 Matte
Free Shipping
/leupold-1piece-standard/VhwizPG3OD-a9kB456UMrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Notes: Torx heads and driver included. No drilling or tapping required.
More

Leupold 1-Piece Standard...

$20.99
MidwayUSA Leupold 1-Piece Standard Scope Base Ruger 10/22 Gloss
Free Shipping
/leupold-1piece-standard/woBUYa2IikJPbp4Res2zOw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Notes: Torx heads and driver included. No drilling or tapping required.
More

Weigand 1-Piece Weaver-Style...

$39.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Single Six Matte
+ $4.99 shipping
/weigand-1piece/7dU3iyM8gTfdFA9bMS1JBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Single Six Notes: Mounting Hardware Included Rear Sight needs to be removed before base can be installed.
More

Power Custom 1-Piece...

$15.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/jHqqksQdPhHBlGOeqJgwVQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Weaver-style Base mounts to the receiver of your rifle with no gunsmithing required. Much better than using tip-off rings if you're mounting a target-style scope. Does not fit Ruger 10/22 Magnum. Technical Information Material: Aluminum Style: Weaver Fits: Ruger 10/22 Notes: Attaches to the factory pre-drilled and tapped holes in the 10/22 receiver. Measures 4.875x.875x.350 Mounting hardware included.
More

Volquartsen 1-Piece...

$54.99
MidwayUSA Volquartsen 1-Piece Picatinny-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/volquartsen-1piece/0X9hNfpGzBTJfxMPMdvm3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Similar to the Weaver-Style bases, featuring rails cut for Picatinny-Style optics and accessories. These aluminum bases do not require gunsmithing for installation and extend 2 in front of the receiver to accommodate all types of optics. Technical InformationNotes: No-gunsmithing mount for 10/22 receiver Aluminum alloy .480 tall, 7 long, has 17 cross-slots, extends approximately 2 forward of the receiver Includes four mounting screws
More

Ruger 10/22 Scope Mount - Low...

$9.95
eBay Ruger 10/22 Scope Mount - Low Profile See Thru Base Weaver Rail 10 22 - 11 Slot
Free Shipping
/ruger-1022-scope-mount/WCbUIBc13Raw7qWV-K5pEw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
FREE FAST SHIPPING!!This is Brand New UTG Picatinny Scope Mount for the Ruger 10/22 Rifle.This Picatinny / Weaver style mount features 11 slots that allow you to better customize scope placement. Mount also has a channel in the middle that will allow the use of your iron sights even with the mount on the rifle.This is a Very High Quality mount Made out of Aircraft Grade Aluminum. Mount comes with 5 mounting screws ( 4 to mount it and an extra ) Detail Information: • 4.7 Long Picatinny Rail w
More

Weigand 1-Piece Weaver-Style...

$39.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Blackhawk, Redhawk, Super Blackhawk, GP100 Silver
+ $4.99 shipping
/weigand-1piece/vvRNa3WU1A_N3pWMTqlgYQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Blackhawk, Super Blackhawk, Redhawk, GP-100 Notes: Mounting Hardware Included Rear Sight needs to be removed before base can be installed.
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Super Redhawk (44 Remington Magnum) with Integral Mounting Notches Silver
+ $4.99 shipping
/weigand-1piece/CFhAVPZjOvvHUvxzmpHFMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Super Redhawk in 44 Magnum Notes: Mounting Hardware Included
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77/44 with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Ldo3mddkRKEB21BOnwd6ig==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Notes: Mounting Hardware Included
More

Burris Ruger to Weaver Scope...

$32.99
MidwayUSA Burris Ruger to Weaver Scope Base Adapter Ruger #1, 77/22, 77/44, Redhawk Gloss
Free Shipping
/burris-ruger-to-weaver/azF9KHQKq65MQ8E-bSyWfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Convert your Ruger rifle to accept Weaver-style rings with these adapters. They attach directly to the receiver, no gunsmithing required. Technical InformationMateri al: Steel Notes: Adapts the Ruger style base to a Weaver style base. Mounting hardware included. These mounts accept only Burris or similar sized Weaver style rings. B-Square and Leupold Rifleman Weaver style rings will not work with these bases
More

B-Square Ruger to...

$61.99
MidwayUSA B-Square Ruger to Weaver-Style Adapter (Weaver-Style Scope Base Only) Ruger 96/44, 77/22, 77/44, 77/ML, Mini-14 Ranch, Mini-30 Matte
+ $4.99 shipping
/bsquare-ruger-to/EBSp1qsiiZ81g5WI2O2AKA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bases are designed to adapt the original base system to allow mounting of Weaver-style rings. Technical InformationMateri al: Aluminum Style: Weaver Notes: Works with Weaver-Style rings Mounting Hardware Included Also fits the Ruger 580 Ranch which is the Mini-14 whose serial number starts with 580
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335