Category

Sport and Outdoor
Showing results for "ruger lr and magnum"
Results 1 - 40 of 1500+

Ruger 77/22; 77/17; 77/44;...

$47.99
Brownells Ruger 77/22; 77/17; 77/44; 77/50 Sear & Spring - Ruger Sear & Spring
+ $7.95 shipping
/ruger-7722-7717/DjjgqsGbq-hvZKR9FrT2Gw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hardened stainless steel sear provides a crisp 2 lb. weight of pull. Sear notch is surface ground for correct angle and engagement. Includes reduced power return spring and complete instructions. Mfg: Timney SPECS: Stainless steel. Fits Ruger 77/22;77/17; 77/44; 77/50 in calibers .22 LR, .22 Magnum and .22 Hornet. May require minor fitting.
More

GrovTec Sling Swivel Set...

$12.79
MidwayUSA GrovTec Sling Swivel Set Ruger 10/22, 44 Magnum Carbine, Number 3 Sling Swivel Studs 1 Locking Swivels Steel Satin Nickel
+ $4.99 shipping
/grovtec-sling-swivel-set/SvKUxMO6M5BbFnS8kt3Zhg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The GrovTec Sling Swivel Set is packaged with both fore end adaptor to fit 10/22, .44 Mag. and No. 3 carbines and 1/2 wood screw suitable for fore end stock mounting. Also includes 3/4 wood screw swivel stud rear and one pair GT Locking Swivels.
More

Volquartsen Exact Edge...

$10.95
eBay Volquartsen Exact Edge Extractor Extracter Ruger 10/22 Lr & Magnum & Charger
+ $3.99 shipping
/volquartsen-exact-edge/e78EkHbhpZU1KrJdzE_K0g==/info
eBay
IN_STOCK ( In stock )
WE ARE A VOLQUARTSEN DEALER BRAND NEW VOLQUARTSEN Exact Edge Extractor for 10/22 LR Magnum Charger AND MK 1 2 3, 22/45 YES contrary to any IGNORANT internet knowledge The Extractor and Extractor spring are the same for the Mark pistols and the 10-22 EARLY MARK 1 and STANDARDS use a different spring, at some point they went to the longer spring If your plunger can be pushed through the firing pin stop hole you use this spring If the holes DO NOT connect you probably have the SHORT plunger and sh
More

RCBS 2-Die Set 300 Ruger...

$29.99
MidwayUSA RCBS 2-Die Set 300 Ruger Compact Magnum (RCM)
+ $7.59 shipping
/rcbs-2die-set-300-ruger/8Rm99e3KCYBHoBDvf3EsSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS 2-Die Set 338 Ruger...

$29.99
MidwayUSA RCBS 2-Die Set 338 Ruger Compact Magnum (RCM)
+ $7.59 shipping
/rcbs-2die-set-338-ruger/zeXLSIiVGvCC7V8HxlsB3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

10/22 Ejector - Ejector For...

$12.99
Brownells 10/22 Ejector - Ejector For Ruger 10/22
+ $7.95 shipping
/1022-ejector-ejector/MsF0ZuaFyiHJdSyWkFwZqg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Replacement for factory ejector is electro- discharge machined (EDM) for precise fit and reliable ejection of shells from 10//22 LR and 10//22 Magnum models. A-2 tool steel construction helps ensure superior strength and long service life. Mfg: Power Custom
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 338 Ruger Compact Magnum (RCM)
+ $7.59 shipping
/hornady-custom-grade-new/RPE3UOVmvOr5-1Uq_F1R1g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Power Custom Ambidextrous Big...

$25.99
MidwayUSA Power Custom Ambidextrous Big Head Safety Ruger 10/22, 10/22 Magnum Blue
+ $4.99 shipping
/power-custom-ambidextrous/56CEGxtkp4BQ15GiWnnKkA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drop-in ambidextrous design features oversized, checkered buttons, making it easy to switch the safety on or off for competition or hunting. The safety shows RED when the safety is off. Does not fit Ruger 10/22 Magnum. Technical Information556828 Power Custom Ambidextrous 10/22 Safety Power Custom 10/22 Ruger Double Big Headed Safety for left or right hand. Drop-in design. CNC machined from solid steel. Oversized checkered buttons on both sides of the safety. Can be reversed for either right or left hand use. These oversized buttons are available in either blue or stainless finish. Includes one safety block, one red safety indicator (shows red when safety is off), two checkered big head buttons, two 4-40x3/16 socket head cap screws, two 3/32 allen wrenches, and one trigger cheater... Less
More

Power Custom Ambidextrous Big...

$26.99
MidwayUSA Power Custom Ambidextrous Big Head Safety Ruger 10/22, 10/22 Magnum Blue with Stainless Steel Buttons
+ $4.99 shipping
/power-custom-ambidextrous/d_MzOFLJNSLclEPlfYIdxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drop-in ambidextrous design features oversized, checkered buttons, making it easy to switch the safety on or off for competition or hunting. The safety shows RED when the safety is off. Does not fit Ruger 10/22 Magnum. Technical Information347689 Power Custom Ambidextrous 10/22 Safety Power Custom 10/22 Ruger Double Big Headed Safety for left or right hand. Drop-in design. CNC machined from solid steel. Oversized checkered buttons on both sides of the safety. Can be reversed for either right or left hand use. These oversized buttons are available in either blue or stainless finish. Includes one safety block, one red safety indicator (shows red when safety is off), two checkered big head buttons, two 4-40x3/16 socket head cap screws, two 3/32 allen wrenches, and one trigger cheater... Less
More

Dewey Bore Guide Ruger 77/22...

$16.99
MidwayUSA Dewey Bore Guide Ruger 77/22 17 Hornady Magnum Rimfire (HMR)
+ $4.99 shipping
/dewey-bore-guide-ruger/ckxyJDK0CtASZ6uA5dvXmw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These delrin rod guides are specifically engineered for rimfire rifles. Use of a rod guide keeps the rod parallel to the bore and prevents binding and scratching while protecting the crown and muzzle from damage. Technical InformationNotes: Replaces bolt while cleaning rifle Guides cleaning rod into action Aids in keeping excessive oil, cleaning solution and debris from entering action
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 375 Ruger, 375 H&H Magnum
+ $4.99 shipping
/hornady-custom-grade-new/-ScAFZ4To8MfIigsfoA0kg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

RCBS Neck Sizer Die 300 Ruger...

$26.29
MidwayUSA RCBS Neck Sizer Die 300 Ruger Compact Magnum (RCM)
+ $4.99 shipping
/rcbs-neck-sizer-die-300/Mz62RmaxTQtJYSOV34jUhA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately.
More

Ruger Mk Ii/Mk Iii 10rd 22lr...

$28.95
Brownells Ruger Mk Ii/Mk Iii 10rd 22lr Magazine With Extended Pad - Mk Ii & Mk Iii Magazine W/ Ext Pad
+ $7.95 shipping
/ruger-mk-iimk-iii-10rd/GKl4KDY2u5zZnbD4atT0Pw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extended base pad promotes proper magazine orientation and seating Base pad is machined from aluminum Base pad fits factory Ruger MKII and MKIII magazines Competition magazine comes with extended base pad preinstalled Magazine fits both MKII and MKIII pistols Magazine has a steel construction, blued finish and polymer follower Mfg: Majestic Arms, Ltd. Fits Ruger 22/45 MKII and MKIII.Base pad aluminum construction. Magazine matte blue, steel construction.
More

RCBS Neck Sizer Die 338 Ruger...

$26.29
MidwayUSA RCBS Neck Sizer Die 338 Ruger Compact Magnum (RCM)
+ $4.99 shipping
/rcbs-neck-sizer-die-338/QAE-MypkDKX6sRhzUeQNXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately.
More

Hornady Reloading Brass 300...

$51.99
MidwayUSA Hornady Reloading Brass 300 Ruger Compact Magnum (RCM) Box of 50
+ $7.59 shipping
/hornady-reloading-brass/N1mSg3Sdw7L0Xr2KYYvHrg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measures their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece. This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 300 Ruger Compact Magnum Finish: Brass
More

Hornady Reloading Brass 338...

$50.99
MidwayUSA Hornady Reloading Brass 338 Ruger Compact Magnum (RCM) Box of 50
+ $7.59 shipping
/hornady-reloading-brass/lYe6pvVy4CV7CkjIUxwrxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measures their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece. This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 338 Ruger Compact Magnum Finish: Brass
More

Factory Extended Magazine...

$7.75
eBay Factory Extended Magazine Release Lever Black - Ruger 10/22
Free Shipping
/factory-extended-magazine/xmFr-Dx6ifVUngB0TilmXQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Factory made Ruger 10/22 LR or Magnum Extended Magazine Release Lever Ruger factory made OEM part. New.Black polymer construction.B-35 spare drift pin included.
More

100 Pro LH Ruger SP101

$57.00
Daniel Outdoors 100 Pro LH Ruger SP101
+ $5.99 shipping
/100-pro-lh-ruger-sp101/4Hf34l-EdITg3HjewByt5g==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
This inside the waistband holster meets the requirements for deep concealment applications. Constructed of premium full grain cowhide, this design features a high back that provides a shield between the body and the sharp edges of the pistol for comfort and to protect clothing. It is designed to ride at the optimum angle inside the waistband to allow for a proper firing grip. The heavy duty spring steel belt clip provides easy on/off convenience, and securely anchors the holster to the belt.Features:- Deep concealment design with high back to shield torso against guns rough edges- Features a non-slip suede-lined exterior next to body- Fits up to 1.75 belts- Heavy-duty spring-steel belt clip securely anchors holster to belt or trousers- Rides at optimum angle inside waistband to ensure... Less
More

Copper Basin Ruger 10/22...

$81.99
Groupon Copper Basin Ruger 10/22 Takedown Backpack - Blue
Free Shipping
/copper-basin-ruger-1022/fd2rifZTK2Jwt-k3h7sStw==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The 10/22 Takedown Backpack is a discreet, stylish alternative for transporting a Ruger 10/22 Takedown rifle. Non-military styling and material blend in with any environment, and the rifles signature contours are obscured by layers of integrated structural foam. Each pocket is sized to house the 10/22 Takedown rifle components - including installed optics and bipod - with fleece lined interiors to reduce noise and prevent wear. The straps are adjustable, the breathable mesh back features a lumbar support pad, and there are plenty of extra pockets for accessory gear. Size: Small/Medium/Larg e. Color: Blue. Gender: Unisex. Age Group: Adult.
More

Hornet Custom Target Trigger...

$16.50
eBay Hornet Custom Target Trigger With Otto Black - Ruger 10/22
+ $3.50 shipping
/hornet-custom-target/k5DFx4thLAa-Qdo0WjKRgg==/info
eBay
IN_STOCK ( In stock )
Hornet Custom Target Trigger for Ruger 10/22 LR Magnum Ruger factory made OEM part. New.Black polymer construction. OTTO: Overtravel trigger set screw included. Hex key included.Spare B-21 KE02800 drift pins included.Step Up to the: Hornet Custom Black Max eBay item number: 310678050454 Price: $139.95
More

Factory 5-pc Drift Pin Kit +...

$5.95
eBay Factory 5-pc Drift Pin Kit + Slave Pin For Ruger 10/22
+ $3.25 shipping
/factory-5pc-drift-pin/FaYbS1SIbJ5G49INrV-kGQ==/info
eBay
IN_STOCK ( In stock )
This is a five (5) piece New set of blued steel factory trigger pins for the Ruger 10/22 LR and Magnum. Ruger Part Numbers: One (1) KE02800 Disconnector Pin (bright steel). One (1) B-21 Sear Pin. One (1) B-35 Bolt Lock Magazine Release Pin. One (1) B-35 Ejector Bolt Lock Spring Pin. One (1) B-19 Hammer Pivot Pin. One Slave Pin for installation of the sear, disconnector and trigger subassembly. Plus an Isometric Trigger Parts Diagram for installation.
More

100 Pro RH Ruger SP101

$57.00
Daniel Outdoors 100 Pro RH Ruger SP101
+ $5.99 shipping
/100-pro-rh-ruger-sp101/2B9Etv7rWD8uoFEnd9dJPQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
This inside the waistband holster meets the requirements for deep concealment applications. Constructed of premium full grain cowhide, this design features a high back that provides a shield between the body and the sharp edges of the pistol for comfort and to protect clothing. It is designed to ride at the optimum angle inside the waistband to allow for a proper firing grip. The heavy duty spring steel belt clip provides easy on/off convenience, and securely anchors the holster to the belt.Features:- Deep concealment design with high back to shield torso against guns rough edges- Features a non-slip suede-lined exterior next to body- Fits up to 1.75 belts- Heavy-duty spring-steel belt clip securely anchors holster to belt or trousers- Rides at optimum angle inside waistband to ensure... Less
More

Ruger Padded Leather Cobra...

$34.99
Groupon Ruger Padded Leather Cobra Sling Dark Brown/Dark
Free Shipping
/ruger-padded-leather/2QmKKtMQxp73jHloWylnUg==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Ruger padded leather Cobra Sling with swivels is 2-1/4 inches wide. The rifle sling is made of genuine leather and is suede lined. This Ruger Cobra rifle sling is comfortable and looks great on a deer rifle. It is adjustable from 27-37. Features the iconic Ruger logo. Size: Small/Medium. Color: Brown/Dark. Gender: Unisex. Age Group: Adult.
More

Hornet Custom 8-pc Stainless...

$12.95
eBay Hornet Custom 8-pc Stainless Steel Trigger Pivot Pin Pack Ruger 10/22
+ $3.25 shipping
/hornet-custom-8pc/9I7exyT-aThBAFSx9f0jIA==/info
eBay
IN_STOCK ( In stock )
Replace Ruger 10/22 LR or Magnum blued steel drift pins with new precision- machined stainless steel pivot pins. This set will make a smoother trigger release and fit much better than factory blued steel pins. New hammer, sear, disconnector pins, bolt lock, magazine release pin, ejector pin and receiver pins are oversized to effectively reduce the amount of trigger play. Have a spare set available in your tool box. Product number: DPKRPSS. Replaces the following Ruger part numbers: KE02800: Disc
More

Magnum Research Barracuda...

$219.99
MidwayUSA Magnum Research Barracuda Right Hand Stock Ruger 10/22 .920 Barrel Channel Laminated Wood Black
+ $9.99 shipping
/magnum-research-barracuda/Udv5zYT9NXen_vcTgtviAQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Barracuda Thumbhole Stock offers a radical design that enhances stability while reducing weight. The unique forend offers a free float design, yet maintains adequate surface for a firm hand hold or a steady rest. The buttstock is skeletonized for maximum weight reduction without a sacrifice in stability or comfort. 920 diameter barrel channel, laminated wood construction. Technical Information Drop-in stock may require minor fitting due to slight dimensional differences in firearm receivers
More

HKS Revolver Speedloader for...

$9.49
Walmart.com HKS Revolver Speedloader for Ruger GP100, S 581, 681, 586, 686 38 Special, 357 Magnum
+ $4.97 shipping
/hks-revolver-speedloader/kAg9DRz1l4Rlgkdn2lRc9w==/info
Walmart.com
IN_STOCK ( In stock )
The HKS Revolver Speedloader instantly drops cartridges with just the slightest twist, loading the entire cylinder of your revolver. Strong metal points hold cartridges securely in the lightweight polymer body until released. The knurled aluminum knob allows for a sure grip under the most stressful circumstances and the also makes the speedloaders easier to grab out of a pouch.
More

Magnum Research Barracuda...

$219.99
MidwayUSA Magnum Research Barracuda Right Hand Stock Ruger 10/22 .920 Barrel Channel Laminated Wood Forest Camo
+ $9.99 shipping
/magnum-research-barracuda/4_kHM46IKU_ZN2_XpgCLww==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Barracuda Thumbhole Stock offers a radical design that enhances stability while reducing weight. The unique forend offers a free float design, yet maintains adequate surface for a firm hand hold or a steady rest. The buttstock is skeletonized for maximum weight reduction without a sacrifice in stability or comfort. 920 diameter barrel channel, laminated wood construction. Technical Information Drop-in stock may require minor fitting due to slight dimensional differences in firearm receivers
More

Ruger Semi Auto Magazine -...

$18.99
Brownells Ruger Semi Auto Magazine - Ruger Mkii .22lr Magazine, 10rd
+ $7.95 shipping
/ruger-semi-auto-magazine/spypMz7Z6akdDKgF-2kZJA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Made from certified, carbon steel; TIG welded and finished without seams, then heat treated for durability. Also available with a rustproof, nickel finish. These are the same magazines that are supplied by many European handgun makers as original equipment. Mfg: Mec-Gar
More

Hornet Custom 6-pc Stainless...

$8.95
eBay Hornet Custom 6-pc Stainless Steel Trigger Pivot Pin Pack Ruger 10/22
+ $3.25 shipping
/hornet-custom-6pc/JzHdgIFD8mpZB7NQV2YBBQ==/info
eBay
IN_STOCK ( In stock )
Replace Ruger 10/22 LR or Magnum blued steel drift pins with new precision- machined stainless steel pivot pins. This set will make a smoother trigger release and fit much better than factory blued steel pins. New hammer, sear, disconnector pins, bolt lock, magazine release pin, ejector pins are oversized to effectively reduce the amount of trigger play. Have a spare set available in your tool box. Product number: DPK+SS. Replaces the following Ruger part numbers: KE02800: Disconnector Pivot Pin
More

Hogue Rubber OverMolded Stock...

$93.46
MidwayUSA Hogue Rubber OverMolded Stock Ruger 10/22 Magnum Standard Barrel Channel Synthetic Black
+ $9.19 shipping
/hogue-rubber-overmolded/RP7gEKjzQ_JWiCAZCSj4jA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hogue OverMolded stocks have fiberglass skeletons with the same permanently- bonded rubber coating used on Hogue's popular handgun grips. The non-slip coating is quiet and durable. The grip and forend have a cobblestone texture for a sure grip. All stocks come with Uncle Mike's swivel studs and recoil pads. Technical Information Pillar Bedded stocks utilize dual aluminum pillars and weigh approximately 2 lbs and 10 oz. Full Bed stocks utilize an aluminum bedding block and weigh approximately 2 lbs and 15 oz. Savage stocks are designed to be adaptable to fit either 2nd or 3rd Generation screw spacing. Stocks designated as Detachable Magazine will fit gun with a detachable box magazine or a hinged floorplate. Blind magazine version features no opening on the bottom of the stock for... Less
More

Hornet Custom 4-pc Stainless...

$6.95
eBay Hornet Custom 4-pc Stainless Steel Trigger Pivot Pin Pack Ruger 10/22
+ $3.25 shipping
/hornet-custom-4pc/t84G93TJNKdmcxKfOywn1Q==/info
eBay
IN_STOCK ( In stock )
Replace Ruger 10/22 LR or Magnum blued steel drift pins with new precision- machined stainless steel pivot pins. This set will make a smoother trigger release and fit much better than factory blued steel pins. New hammer, sear, disconnector pins are oversized to effectively reduce the amount of trigger play. Have a spare set available in your tool box. Product number: DPK+SS. Replaces the following Ruger part numbers: KE02800: Disconnector Pivot Pin B-19: Hammer Pivot Pin B-21: Trigger Pivot Pin
More

Ruger BX-15 Magazine

$27.99
Cabela's Ruger BX-15 Magazine
+ $8.95 shipping
/ruger-bx15-magazine/1dutAKvqrGV51fQ6yJS2Mw==/info
Cabela's
IN_STOCK ( In stock )
Rugers BX-15 15-round Magazine is tested and proven to feed as reliably as their standard BX-1 10-round rotary magazine. Compatible with factory Ruger 10/22 rifles, SR-22 rifles and 22 Charger pistols. Ruger logo detailing. Made in USA. Media
More

5BH Thumbsnap LH Ruger GP100 4

$64.99
Daniel Outdoors 5BH Thumbsnap LH Ruger GP100 4
+ $5.99 shipping
/5bh-thumbsnap-lh-ruger/ayKmK9Q_sNqU4-EoHj5PQg==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
This design is a Bianchi classic that is ideal for field and casual concealment of most revolvers. The steel-reinforced thumb snap provides retention while the design of the leading edge protects the adjustable rear sight found on many revolvers. Features:- 2-3 Holsters fit 1.75 belt slots- 4 Larger holsters include 1.75 and 2.25 belt slots- Full grain leather, Plain Tan finish- Integral thumb snap closure- Strongside hi-ride carry carries gun close to body for added comfort- Unlined holsterFeatures: - Material: Leather- Color: Tan- Finish: Plain- Hand: LeftFits:- Colt .38 Special, King Cobra, 4 Barrel- Colt .357 Magnum, King Cobra / Python Elite, 4 Barrel- Dan Wesson .357 Magnum, 15 V / 15 VH / 715 VH, 4 Barrel- Llama .38 Special, Comanche II, 4 Barrel- Llama .357 Magnum, Comanche III /... Less
More

Outers Ruger 10/22 Cleaning...

$13.99
MidwayUSA Outers Ruger 10/22 Cleaning Kit Aluminum Rod 22 Caliber 8 x 32 Thread
+ $7.59 shipping
/outers-ruger-1022/UAqmTZ9R58rM17znlGm66A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Sturdy box provides secure storage and portability. Durable aluminum rods, tips, patches and non-toxic gun cleaners keep your firearms in top condition.
More

Hogue Rubber OverMolded Stock...

$93.46
MidwayUSA Hogue Rubber OverMolded Stock Ruger 10/22 Magnum .920 Barrel Channel Synthetic Black
+ $9.19 shipping
/hogue-rubber-overmolded/r9xNHFwNrlcb0d_jOhsIrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hogue OverMolded stocks have fiberglass skeletons with the same permanently- bonded rubber coating used on Hogue's popular handgun grips. The non-slip coating is quiet and durable. The grip and forend have a cobblestone texture for a sure grip. All stocks come with Uncle Mike's swivel studs and recoil pads. Technical Information Pillar Bedded stocks utilize dual aluminum pillars and weigh approximately 2 lbs and 10 oz. Full Bed stocks utilize an aluminum bedding block and weigh approximately 2 lbs and 15 oz. Savage stocks are designed to be adaptable to fit either 2nd or 3rd Generation screw spacing. Stocks designated as Detachable Magazine will fit gun with a detachable box magazine or a hinged floorplate. Blind magazine version features no opening on the bottom of the stock for... Less
More

5BH Thumbsnap RH Ruger GP100 6

$64.99
Daniel Outdoors 5BH Thumbsnap RH Ruger GP100 6
+ $5.99 shipping
/5bh-thumbsnap-rh-ruger/9t6I8v0V_fx4xtfbtsLpwQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
This design is a Bianchi classic that is ideal for field and casual concealment of most revolvers. The steel-reinforced thumb snap provides retention while the design of the leading edge protects the adjustable rear sight found on many revolvers. Features:- 2-3 Holsters fit 1.75 belt slots- 4 Larger holsters include 1.75 and 2.25 belt slots- Full grain leather, Plain Tan finish- Integral thumb snap closure- Strongside hi-ride carry carries gun close to body for added comfort- Unlined holsterFeatures: - Material: Leather- Color: Tan- Finish: Plain- Hand: RightFits:- Colt .38 Special, King Cobra, 6 Barrel- Colt .357 Magnum, King Cobra / Python / Python Elite, 6 Barrel- Dan Wesson .357 Magnum, 15 V / 15 VH / 715 VH, 6 Barrel- Llama .22 LR, Comanche I / Martial, 6 Barrel- Llama .38 Special,... Less
More

Ruger Mark I/Ii/Iii Black Max...

$28.99
Brownells Ruger Mark I/Ii/Iii Black Max Holster - High-Rider Holster
+ $7.95 shipping
/ruger-mark-iiiiii-black/eP4IKsVd-i_zQfpDgWaieA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged and lightweight polymer composite holster holds a Ruger Mark series .22 LR pistol with or without optics. Reversible design allows the holster to be worn on the left or right side. Adjustable retention system accommodates almost any version of the Mark series. Fully covered triggerguard for added safety. Slick interior ensures a smooth, fast presentation, and reholstering. Front cut opening provides clearance for optics and lets the barrel clear the holster quickly during the draw, so you can get on target faster. High-Ride model sits right at the hip. Low-Ride model sits approximately 2 below the hip. Mfg: Tactical Solutions, Llc SPECS: Thermo-molded polymer, black. Fits belts up to 2 wide. Fits Ruger Mark I, Mark II, Mark III 800x600 , & 22/45 .22 LR pistols.
More

Ruger Mark I/Ii/Iii Black Max...

$28.99
Brownells Ruger Mark I/Ii/Iii Black Max Holster - Low-Rider Holster
+ $7.95 shipping
/ruger-mark-iiiiii-black/k61BUP5XJI5IUGE0SOXZJg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged and lightweight polymer composite holster holds a Ruger Mark series .22 LR pistol with or without optics. Reversible design allows the holster to be worn on the left or right side. Adjustable retention system accommodates almost any version of the Mark series. Fully covered triggerguard for added safety. Slick interior ensures a smooth, fast presentation, and reholstering. Front cut opening provides clearance for optics and lets the barrel clear the holster quickly during the draw, so you can get on target faster. High-Ride model sits right at the hip. Low-Ride model sits approximately 2 below the hip. Mfg: Tactical Solutions, Llc SPECS: Thermo-molded polymer, black. Fits belts up to 2 wide. Fits Ruger Mark I, Mark II, Mark III 800x600 , & 22/45 .22 LR pistols.
More

Ruger 10/22 High Performance...

$129.99
Brownells Ruger 10/22 High Performance Action Kit - Magnum 10/22 Action Kit
+ $7.95 shipping
/ruger-1022-high/iZwwGIQh-Vvegpj_7v9JKQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
These kits consist of a target hammer (includes shims and bushings), hammer spring, target disconnector, target sear and target trigger. Includes polished plunger and spring with overtravel adjustment. Also included is a recoil buffer to reduce wear on the action and bolt. The HP Action Kit will give the shooter one of the most crisp, clean trigger pulls available. Reduces trigger pull down to approximately 2.25 2.5lbs. Available in standard 22lr Long Rifle or Magnum. Mfg: Volquartsen
More

5BHL Thumbsnap LH Ruger GP100...

$84.99
Daniel Outdoors 5BHL Thumbsnap LH Ruger GP100 4
+ $5.99 shipping
/5bhl-thumbsnap-lh-ruger/-VmLtAZtv-GHby5H1ZKuUg==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
This design is a Bianchi classic that is ideal for field and casual concealment of most revolvers. The steel-reinforced thumb snap provides retention while the design of the leading edge protects the adjustable rear sight found on many revolvers. Features:- 2-3 Holsters fit 1.75 belt slots- 4 Larger holsters include 1.75 and 2.25 belt slots- Full grain leather, Plain Tan finish- Integral thumb snap closure- Fully lined holster- Strongside hi-ride carry carries gun close to body for added comfortSpecificat ions:- Material: Leather- Color: Tan- Finish: Plain- Hand: LeftFits:- Colt .357 Magnum, Python Elite, 4 Barrel- Dan Wesson .357 Magnum, 15 V / 15 VH / 715 VH / 4 Barrel- Llama .38 Special, Comanche II / Martial, 4 Barrel- Llama .357 Magnum, Comanche III / Martial, 4 Barrel- Ruger .357... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335