Category

Sport and Outdoor
Showing results for "roni carbine"
Results 1 - 40 of 558

Lee Quick Trim Die 30 Carbine

$9.99
MidwayUSA Lee Quick Trim Die 30 Carbine
+ $4.99 shipping
/lee-quick-trim-die-30/n7_9r5uyTQTEmkvW5rgOhw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

RCBS 3-Die Set 30 Carbine

$46.49
MidwayUSA RCBS 3-Die Set 30 Carbine
+ $7.59 shipping
/rcbs-3die-set-30-carbine/3sGOF0sLnjZJMM2d76z5HA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

RCBS Trim Die 30 Carbine

$35.99
MidwayUSA RCBS Trim Die 30 Carbine
+ $4.99 shipping
/rcbs-trim-die-30-carbine/8hYnO2Myi8BBtO--IuD-nQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Lyman 3-Die Set 30 Carbine

$46.99
MidwayUSA Lyman 3-Die Set 30 Carbine
+ $7.59 shipping
/lyman-3die-set-30-carbine/Djt9WgcXEo45SUbSi-ZFzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Straight wall rifle cases require these three die sets consisting of a full length sizing die with decapping stem, a two step neck expanding (M) die and a bullet seating die. Ideal for loading cast bullets due to the inclusion of the neck expanding die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) 2-Step Neck Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included.
More

Redding 3-Die Set 30 Carbine

$47.49
MidwayUSA Redding 3-Die Set 30 Carbine
+ $8.39 shipping
/redding-3die-set-30/GfoXON1kfaEyKp2AXEdM1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Dpms Buffers - Carbine Buffer

$31.99
Brownells Dpms Buffers - Carbine Buffer
+ $7.95 shipping
/dpms-buffers-carbine/IF3rWSoeckftPm66dLd0sA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Genuine DPMS factory parts will help you repair an existing rifle or correctly install a stock to a custom build. Buffers and springs are weighted to function properly in DPMS LR-308 and Remington R-25 rifles. Rifle Buffer fits buffer tube for fixed, A2-type rifle stock; will not work in carbine tube. Mfg: Dpms SPECS: Carbine Buffer Steel body. 2 long, 3.7oz. wt. Rifle buffer Aluminum body. 4-7⁄8 long.
More

Tippmann M4 Carbine Deluxe...

$49.95
ANSgear Paintball Tippmann M4 Carbine Deluxe Parts Kit (T550008)
No Shipping Info
/tippmann-m4-carbine/JM7HLPpLux6xdVPjlfpXmw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
M4 Carbine Deluxe Parts Kit.Kit Includes the following parts:QTY Part No. Description 1 TA20065 Grease Pack 1 LUBE Oil Pack 1 98-12A O-ring, C.U., 90A, 2-019 2 TA50029 Pin Detent 2 TA20049 O-Ring, C.U., 70A, 2-006 2 TA30049 O-Ring, C.U., 70A, 2-008 2 TA20096 .150 I.D. X 0.037 C.S., O-Ring, C.U., 70A 1 TA50139 10-32 x 3/16 LONG BHSCS 1 TA50095 SHCS #6-32 X 1/4 2 TA50128 Spring, Comp., 0.750 F.L. X 0.084 O.D. 1 TA20073 Quick Fill Nipple 1 TA50141 Locking Tab For Input Fitting 1 TA50236 Puncture Valve Gas Line Plug Complete 1 TA50133 #8-32 X... Less
More

Redding Trim Die 30 Carbine

$31.29
MidwayUSA Redding Trim Die 30 Carbine
+ $4.99 shipping
/redding-trim-die-30/6lcJq_EfREarHrcVm-jlxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Lee Carbide 3-Die Set 30...

$39.99
MidwayUSA Lee Carbide 3-Die Set 30 Carbine
+ $7.59 shipping
/lee-carbide-3die-set-30/2gMxdrQv6X7kfnUoB9xbSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Classic Crosman 760...

$24.98
Walmart.com Classic Crosman 760 Pumpmaster Air Carbine
Free Shipping
/classic-crosman-760/djVQNJanJkj-Uhe16ghbxQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The lightweight Classic Crosman 760 Pumpmaster Air Carbine is a smart choice for budding shooters. It can shoot up to 600 pellets per second with great accuracy. This carbine features a fiber-optic front sight and an open adjustable rear sight for enhanced precision. It holds up to 200 rounds of BBs and its clip can accommodate five pellets to provide adequate ammunition. This Crosman air rifle has a slide bolt for added safety.
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 30 Carbine
+ $4.99 shipping
/lee-powder-through/qvvjW8a3XSZfgQH--ZZUUg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

RCBS Sizer Die 30 Carbine

$27.49
MidwayUSA RCBS Sizer Die 30 Carbine
+ $4.99 shipping
/rcbs-sizer-die-30-carbine/xL3_hZSP3a0DGeNCYFCf3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These dies size the entire length of the case. Steel dies require the application of sizing lube to prevent damage to the case or it sticking in the die.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Expander- Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case. NOT Carbide.
More

Lee Factory Crimp Die 30...

$13.99
MidwayUSA Lee Factory Crimp Die 30 Carbine
+ $4.99 shipping
/lee-factory-crimp-die-30/yRtYhu6KSLHT7RjzdSJQig==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Kensight Mfg. M1 Carbine Rear...

$26.99
Brownells Kensight Mfg. M1 Carbine Rear Aperture Sight - Rear Aperture Sight
+ $7.95 shipping
/kensight-mfg-m1-carbine/T0eUBsRSTd2P1A-cia71Aw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Modern, high-quality reproduction of the original rear sight makes restoring your M1 carbine easier and the final job look authentic. Patterned after the factory rear sight using modern CAD/CAM design techniques and wire EDM cut from 4140 bar stock for tight tolerances. Features audible clicks for precise windage adjustment and preset range increments for elevation adjustment. Mfg: Kensight Mfg. SPECS: Steel, blued, matte finish. Fits M1 Carbine.
More

RCBS Extended Shellholder #17...

$28.49
MidwayUSA RCBS Extended Shellholder #17 (30 Carbine, 32 ACP)
+ $4.99 shipping
/rcbs-extended-shellholder/FXfKDyihi9N1dic9Mcbs7A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for working short cases. Perfect for using the RCBS Competition Seating Die or Trim Die. Works for single stage presses only.Technical InformationMateri al: Steel Fits: 30 Carbine 32 ACP Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

Slumberjack Carbine 2500...

$199.95
eBags.com Slumberjack Carbine 2500 Hiking Backpack Kryptek Highlander - Slumberjack Backpacking Packs
Free Shipping
/slumberjack-carbine-2500/Bx_ov1NToud-9SMJb4rKKw==/info
eBags.com
IN_STOCK ( In stock )
Free Shipping
Carbine 2500 Hiking Backpack Kryptek Highlander. Comfortable and versatile, the fully-featured Carbine 2500 is ideal for all day or minimalist overnight deer and small game hunts
More

RCBS Carbide 3-Die Set 30...

$69.99
MidwayUSA RCBS Carbide 3-Die Set 30 Carbine
+ $7.59 shipping
/rcbs-carbide-3die-set-30/Z3fSNB_ukLbeFsBnD7SxAA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS
More

Lyman Neck Expander M Die 30...

$21.99
MidwayUSA Lyman Neck Expander M Die 30 Carbine
+ $4.99 shipping
/lyman-neck-expander-m-die/iLd0UNrgoqHN8f_0R9xsFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating.
More

Hornady Custom Grade New...

$46.99
MidwayUSA Hornady Custom Grade New Dimension 3-Die Set 30 Carbine
+ $7.59 shipping
/hornady-custom-grade-new/pdAa8hAMKFIN9M7IbQnxgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. The 3-die set is designed for straight-walled cases. The set includes CGND Full Length Sizer Die, CGND Expander Die, and CGND Seater Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This is designed to eliminate spindle slippage and makes tightening the spindle lock a breeze when making adjustments. The CGND Seater Die is designed with a floating bullet seater alignment sleeve and seating stem that aligns the bullet with the case, to improve bullet seating and accuracy. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full-length Sizing Die Adjustable Case Mouth Expander Die Bullet... Less
More

Redding Shellholder #22 (30...

$10.79
MidwayUSA Redding Shellholder #22 (30 Carbine, 32 ACP)
+ $4.99 shipping
/redding-shellholder-22/y0NVzu3inHGQyh8M5y2PiA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationMateri al:Steel Fits:5.7mm Johnson, 30 M1 Carbine, 32 ACP
More

Dpms Carbine Buffer Spring

$6.99
Brownells Dpms Carbine Buffer Spring
+ $7.95 shipping
/dpms-carbine-buffer-spring/AzGlLFm1GJmx7RWAGiynSQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Stainless steel carbine buffer spring manufactured to MIL-S-1357 specification for replacement on rifles with M4-type receiver extension tube for collapsible carbine buttstock. Replace a fatigued spring, or use as part of the rifle-to-carbine stock conversion. Cold drawn to ASTM A313 standard for heat- and corrosion- resistance, and case hardened for improved resistance to surface wear. Mfg: Dpms SPECS: 631 stainless steel. Fits AR-15/M16 rifles chambered in .223/5.56mm with M4-type receiver extension for collapsible buttstock.
More

Redding Taper Crimp Die 30...

$28.49
MidwayUSA Redding Taper Crimp Die 30 Carbine
+ $4.99 shipping
/redding-taper-crimp-die/qPv48SH5Bz0N0d7ogEYd2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

RCBS Taper Crimp Seater Die...

$23.99
MidwayUSA RCBS Taper Crimp Seater Die 30 Carbine
+ $4.99 shipping
/rcbs-taper-crimp-seater/seBWR6xSmu5QCetz3u4Llg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use. Technical InformationMateri al: Steel Die Type Included: Taper Crimp Seater Die Accessories: Plastic storage case Notes: The crimp gently tapers tighter and tighter to hold the bullet in place. It does not affect the overall length of the cartridge. This is very important for semi-automatics where the cartridge headspaces on the case mouth. A Bullet seater is used to push (seat) the bullet down into the case to a specific depth.
More

Atlanco 30 Shot Carbine Pouch...

$4.95
ANSgear Paintball Atlanco 30 Shot Carbine Pouch - Woodland Camo
No Shipping Info
/atlanco-30-shot-carbine/nYDKAU4J1l5V17VFji2Prw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
Atlanco 30 Shot Carbine Pouch
More

Lee Carbide Sizer Die 30...

$32.99
MidwayUSA Lee Carbide Sizer Die 30 Carbine
+ $4.99 shipping
/lee-carbide-sizer-die-30/8Qsf4rOfLi6R66yq0gX9ww==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been making high quality reloading equipment for over 50 years. Lee Carbide Sizing Dies are great for straight wall cartridge cases. The solid carbide insert is ground to a special contour that will not leave a belt mark on the cartridge case. Carbide dies require no lubricant and will actually burnish the case to improve the finish. Carbide dies will last a lifetime and not wear out. Shellholder sold separately. Technical Information Material: Steel Die Type: Carbide Sizing Die Accessories: Plastic Storage Box Notes: No lubrication required
More

Redding Extended Shellholder...

$15.79
MidwayUSA Redding Extended Shellholder #22E (30 Carbine, 32 ACP)
+ $4.99 shipping
/redding-extended/8uTlYlVhJJWBwWPkHjjdyw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Extended Shellholders are required when trimming short cases under 1 1/2 O.A.L They are machined to the same tolerances as our standard shellholders except they're longer.
More

RCBS Competition Extended...

$28.49
MidwayUSA RCBS Competition Extended Shellholder #17 (30 Carbine, 32 ACP)
+ $4.99 shipping
/rcbs-competition-extended/Qw_ATJGUEgalU_DNjx7UxA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for reloading short cartridges when using the RCBS Competition Seating die.Technical InformationMateri al: Steel Fits: 30 Carbine 32 ACP Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Competition shellholders are black oxide coated Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

RCBS Carbide Sizer Die 30...

$57.99
MidwayUSA RCBS Carbide Sizer Die 30 Carbine
+ $4.99 shipping
/rcbs-carbide-sizer-die-30/bKBsbvmP_Qa1OLb6ByQFWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Carbide Sizer Die eliminates the need for case lubrication. Sizes and decaps in one quick step. Shellholder sold separately. Includes a plastic storage case and Lifetime Guarantee from RCBS
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 30 Carbine
+ $4.99 shipping
/hornady-custom-grade-new/f5tnm2rWMGPJtQ0XzJSTVQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Tippmann M4 Carbine Basic...

$9.95
ANSgear Paintball Tippmann M4 Carbine Basic Parts Kit (T550007)
No Shipping Info
/tippmann-m4-carbine-basic/OTLMiDsMZWWq_8Uk-fwT4Q==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
M4 Carbine Basic Parts Kit.Kit includes the following parts.QTY Part No. Description 1 TA20065 Grease Pack1 LUBE Oil Pack1 98-12A O-ring, C.U., 90A, 2- 0192 TA50029 Pin Detent2 TA20049 O-Ring, C.U., 70A, 2- 0062 TA30049 O-Ring, C.U., 70A, 2- 0082 TA20096 .150 I.D. X 0.037 C.S., O-Ring, C.U., 70A1 TA50139 10-32 x 3/16 LONG BHSCS1 TA50095 SHCS #6-32 X 1/41 TA50110 H.U. Pusher1 TA50146 Front Bolt Spring1 TA50014 H.U. Bucking
More

Lee Load-Master Progressive...

$22.99
MidwayUSA Lee Load-Master Progressive Press Shellplate #7 (30 Carbine, 32 ACP)
+ $4.99 shipping
/lee-loadmaster/oWypyKMhutOJze-bVNdDiQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Quick change Shellplates for the Load-Master Press. Please consult the Technical Specifications below for specific caliber information. Technical Information Function: Shell Plate Lee Load-Master Progressive Press Material: Steel Notes: Fits: 30 M1 Carbine32 ACP Note:Lee also lists this shellplate as working with 32 ACP. However, some 32 ACP brass will not fit. If you find that your 32 ACP brass will not work, Lee will modify the shellplate for you at no charge. Please send a few sample pieces of your brass with the shellplate to: Lee Precision Inc. 4275 Highway U Hartford, WI 53027 Lee will make the changes and return the shellplate to you.
More

L.E. Wilson Case Length Gage...

$17.49
MidwayUSA L.E. Wilson Case Length Gage 30 Carbine
+ $4.99 shipping
/le-wilson-case-length/xuclXHtHtAhyqyJoZha_qQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. This steel case length gage allows reloaders to easily identify any case that exceeds the maximum allowable case length according to SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: Allows reloaders to easily identify cases that are beyond maximum length
More

Starline Reloading Brass 30...

$109.99
MidwayUSA Starline Reloading Brass 30 Carbine Box of 500 (Bulk Packaged)
+ $10.79 shipping
/starline-reloading-brass/1WDtCcT-rFIMduW9lReYaw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 30 CarbineFinish: BrassPreparation: Due to the manufacturing process and/or shipping, case... Less
More

Starline Reloading Brass 30...

$24.29
MidwayUSA Starline Reloading Brass 30 Carbine Box of 100 (Bulk Packaged)
+ $7.59 shipping
/starline-reloading-brass/2d54njzNtWBStY8_jhSxPQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 30 CarbineFinish: BrassPreparation: Due to the manufacturing process and/or shipping, case... Less
More

Winchester Reloading Brass 30...

$23.99
MidwayUSA Winchester Reloading Brass 30 Carbine Bag of 100
+ $7.59 shipping
/winchester-reloading/u5iscyyaPP_4aUG0VPSf8Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloading several times. New, unprimed brass. This is not loaded ammunition. Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading.Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which involves rapid heating to a specified temperature followed... Less
More

Empire BT TM-15 Carbine Stock...

$10.77
ANSgear Paintball Empire BT TM-15 Carbine Stock Body (17836)
No Shipping Info
/empire-bt-tm15-carbine/0vxZQX_nSHMIghuv5KXOnw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
Empire BT TM-15 Carbine Stock BodyPart # (17836)
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 30 Carbine
+ $4.99 shipping
/le-wilson-trimmer-case/QrlTOni9j1vCxjDgRj8UmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth..
More

Empire BT TM-15 Carbine Stock...

$5.95
ANSgear Paintball Empire BT TM-15 Carbine Stock Spring Housing (17840)
No Shipping Info
/empire-bt-tm15-carbine/WW58dFYRS22ho6oCDUKlsQ==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
Empire BT TM-15 Carbine Stock Spring HousingPart # (17840)
More

Empire BT TM-15 Carbine Stock...

$1.77
ANSgear Paintball Empire BT TM-15 Carbine Stock Spring (17841)
No Shipping Info
/empire-bt-tm15-carbine/gwUjK5VnbnIcRlg1tsG1rw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
Empire BT TM-15 Carbine Stock SpringPart # (17841)
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335