Category

Sport and Outdoor
Showing results for "replacement stocks weatherby vanguard"
Results 1 - 40 of 751

Weatherby Reloading Brass 7mm...

$42.99
MidwayUSA Weatherby Reloading Brass 7mm Weatherby Magnum Box of 20
+ $4.99 shipping
/weatherby-reloading-brass/eT8OhDQ3RElIkmzRQIf4sg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Produced exclusively for Weatherby by Norma Precision. Brass has CNC-machined primer pockets and is made to match-grade specifications. New unprimed brass. This is not loaded ammunition. Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To insure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Notes: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which involves rapid heating to a specified temperature followed by rapid cooling. This process imparts cases with the proper hardness to securely hold a bullet as well as gives flexibility to expand... Less
More

Score-High Pillar Bedding Kit...

$39.99
MidwayUSA Score-High Pillar Bedding Kit Howa 1500 Weatherby Vanguard
+ $4.99 shipping
/scorehigh-pillar-bedding/EEVmLrTl_OqUTmfqtAKM7g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pillar bedding is one of the most effective means of bedding many stocks. This kit includes pillars, reusable installation hardware and an installation guide on CD-ROM.
More

Timney Triggers Weatherby...

$102.71
Walmart.com Timney Triggers Weatherby Vanguard WV 1500 Trigger
Free Shipping
/timney-triggers-weatherby/UiO839zO36o6WaRTGFWn_A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Timney Trigger Weatherby Vanguard 1500 features true Timney quality and an exclusive three position safety. Fits the Weatherby Vanguard, Mossberg 1500, Smith and Wesson 1500, and HOWA 1500 actions. It also fits the Weatherby Vanguard Series two.
More

Forster Stockmaker's Hand...

$17.49
MidwayUSA Forster Stockmaker's Hand Screws Sako, Howa, S&W 1500, Weatherby Vanguard Pack of 2
+ $4.99 shipping
/forster-stockmakers-hand/U6w6VJnNoe6AFrygy9ezBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Rather than tightening the original screws over and over again, use these durable T-handled screws to seat the action into the stock for that perfect fit. These screws are precision made and hardened for repeated trial fittings. Set of 2.Technical InformationMateri al: Tool Steel Notes: For Use When Inletting When Repeated Removal and Replacement of the Action is Necessary T-Handle 6 x 1 mm Fits Sako, Howa, S&W 1500, Weatherby Vanguard
More

Weatherby Vanguard Factory...

$11.45
eBay Weatherby Vanguard Factory Owners Instruction Manual Reproduction
Free Shipping
/weatherby-vanguard/3DyJPizHvg3isRQRh4fq-A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Weatherby Vanguard early (70’s vintage) factory instruction manual - NOT AN ORIGINAL. Printed with high resolution scans of an original. Printed on correct weight papers at the correct size in full color. This is the manual that came from the factory with your firearm when new. Eight pages plus covers with pictures and text covering warranty, specifications, barrel and calibers, stock, assembly of the bolt to receiver, loading, safety, unloading, disassembly of the bolt, to replace the bolt,
More

Redding 2-Die Set 7mm...

$92.99
MidwayUSA Redding 2-Die Set 7mm Weatherby Magnum
+ $8.39 shipping
/redding-2die-set-7mm/U_nV1i_arNb6uVzd7VBJQA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 375...

$83.21
MidwayUSA Redding 2-Die Set 375 Weatherby Magnum
+ $7.59 shipping
/redding-2die-set-375/wSK6sU7wNkAsXHGgKB8Svw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding Body Die 300...

$31.29
MidwayUSA Redding Body Die 300 Weatherby Magnum
+ $4.99 shipping
/redding-body-die-300/Zdc_QImhgu6G_6qaOhw08g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced using precise manufacturing processes along with the highest quality components available. Body dies are designed to full length size the case body and bump the shoulder position for proper chambering
More

Vanguard Equalizer Pro 2...

$109.99
Groupon Vanguard Equalizer Pro 2 Shooting Stick
Free Shipping
/vanguard-equalizer-pro-2/qNp8iHVsInFZBYVpBGN8vg==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
Set-up or take down Equalizer Pro in under a second! It features a 3 way pivoting head for quick and easy target sighting. Fully retract the legs with a press of a buton. Precise height adjustment is quick and efficient with a simple pull of the leg. Textured all-terrain feet make for a stable shooting surface.
More

RCBS 2-Die Set 7mm Weatherby...

$29.99
MidwayUSA RCBS 2-Die Set 7mm Weatherby Magnum
+ $7.59 shipping
/rcbs-2die-set-7mm/L6fQCNEs4sNzl3inVwXsQA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Trim Die 300 Weatherby...

$30.49
MidwayUSA RCBS Trim Die 300 Weatherby Magnum
+ $4.99 shipping
/rcbs-trim-die-300/pr1mJHOrwSnDGrFdkjg_8Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

RCBS Trim Die 340 Weatherby...

$30.41
MidwayUSA RCBS Trim Die 340 Weatherby Magnum
+ $4.99 shipping
/rcbs-trim-die-340/-pc54xndzFY7339VwASCVA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Redding Trim Die 257...

$42.49
MidwayUSA Redding Trim Die 257 Weatherby Magnum
+ $4.99 shipping
/redding-trim-die-257/4PcDh-35HtLv61L_3KmhAg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

RCBS Trim Die 257 Weatherby...

$35.99
MidwayUSA RCBS Trim Die 257 Weatherby Magnum
+ $4.99 shipping
/rcbs-trim-die-257/7Rkck_1erkfB0ULgKsq86Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Redding Body Die 257...

$48.99
MidwayUSA Redding Body Die 257 Weatherby Magnum
+ $4.99 shipping
/redding-body-die-257/HI5bFJikZyXqDMeh-C2arg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced using precise manufacturing processes along with the highest quality components available. Body dies are designed to full length size the case body and bump the shoulder position for proper chambering. Technical InformationMateri al: SteelDie Type: Body DieAccessories: Plastic storage case
More

Redding 2-Die Set 340...

$66.49
MidwayUSA Redding 2-Die Set 340 Weatherby Magnum
+ $8.39 shipping
/redding-2die-set-340/JVUx_llkHlcptvrU-Ztfbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Weatherby Vanguard Howa 3 Rnd...

$34.99
eBay Weatherby Vanguard Howa 3 Rnd Magazine Mag Clip 25-06 270 30-06
+ $7.95 shipping
/weatherby-vanguard-howa-3/NSFhFzybVqnGGQORMA-xIA==/info
eBay
IN_STOCK ( In stock )
Offered is a factory original Weatherby Magazine clip for a Vanguard Model with the detachable box magazine kit installed, to replace the original hinged floor plate magazine. Also fits selected Howa 1500 and Smith Wesson and Mossberg versions of the Howa 1500, if they have the detachable mag kit installed. .New in original packaging. Packaging may show some scuffing or wear. Fits the following calibers: 25-06 270 30-06
More

Redding Shellholder #18...

$10.79
MidwayUSA Redding Shellholder #18 (30-378 Weatherby Magnum, 45-70 Government, 460 Weatherby Magnum)
+ $4.99 shipping
/redding-shellholder-18/LWOPekx00fGZ0c5-p20yoQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationFits: 30-378 Weatherby Magnum300 Kong300 Pegasus300 Baer300 Lapua Magnum30-416 Weatherby Magnum8x52mm R Siamese33 Winchester330 Baer 338-378 Weatherby Magnum378 Weatherby Magnum416 Jarrett416 Weatherby Magnum 416 Rigby450 Dakota460 Weatherby Magnum40-65 WCF40-82 WCF40-50 Sharps Bottleneck40-70 Government40-70 Sharps Bottleneck40-90 Sharps Bottleneck45-60 WCF 45-70 Government45-90 WCF45-100 Sharps45-110 Sharps45-120 Sharps480 Ruger475 Linebaugh
More

Redding 2-Die Set 270...

$66.49
MidwayUSA Redding 2-Die Set 270 Weatherby Magnum
+ $8.39 shipping
/redding-2die-set-270/RI6UHuXaCnOCJ54opph-kw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 416...

$103.99
MidwayUSA Redding 2-Die Set 416 Weatherby Magnum
+ $7.59 shipping
/redding-2die-set-416/Yq5DdV6-hrqt3rKu5h4FNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 300...

$47.49
MidwayUSA Redding 2-Die Set 300 Weatherby Magnum
+ $7.59 shipping
/redding-2die-set-300/_7kPtOLrU9sz6eciPZG1ew==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 257...

$66.49
MidwayUSA Redding 2-Die Set 257 Weatherby Magnum
+ $7.59 shipping
/redding-2die-set-257/nNNyc9MQEAGxjZiIJyItVQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee Quick Trim Die 300...

$9.99
MidwayUSA Lee Quick Trim Die 300 Weatherby Magnum
+ $4.99 shipping
/lee-quick-trim-die-300/vKZVhnPpdYR7OtbW6-JAoA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

RCBS Trim Die 240 Weatherby...

$30.49
MidwayUSA RCBS Trim Die 240 Weatherby Magnum
+ $4.99 shipping
/rcbs-trim-die-240/yvglXYIMvvYQctZV4VHcFw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Weatherby Vanguard Medalist...

$289.99
Brownells Weatherby Vanguard Medalist Stock - Weatherby Vanguard
+ $7.95 shipping
/weatherby-vanguard/uV8amohh-7QRiT-ybieY3Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Weatherby has a raised, Monte Carlo cheekpiece. Features a non checkered extended grip and a fairly wide forend w/ dual front sling studs, and an integral aluminum bedding system. Mfg: Bell & Carlson SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½ (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require... Less
More

AimShot 300 Weatherby Arbor...

$9.99
MidwayUSA AimShot 300 Weatherby Arbor for 223 Diode Module
+ $4.99 shipping
/aimshot-300-weatherby/of3trd5rMp8_GYS5TviFhA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 223 Laser Diode Module (sold separetely). Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Techncial Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight .223 Diode Module (product # 344849). Slides over .223 diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Redding 2-Die Set 6.5mm-300...

$189.99
MidwayUSA Redding 2-Die Set 6.5mm-300 Weatherby Magnum
+ $7.59 shipping
/redding-2die-set/3NOtSdu47HRtVUNPyDCMtQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Straight wall cases require purchase of separate expanding die. Shellholder Not Included
More

Icelantic Vanguard Ski One...

$559.26
Backcountry.com Icelantic Vanguard Ski One Color, 188cm
Free Shipping
/icelantic-vanguard-ski/mqK-RMshxkbIe0jQXbOOTA==/info
Backcountry.com
IN_STOCK ( In stock )
Free Shipping
When your pursuit of untracked lines takes you to mountains far removed from chairlifts and condos, you'll want the Icelantic Vanguard Ski on your feet. This effective backcountry tool features Icelantic's reliable Tri-Axe sandwich construction along with a lightweight Ochroma wood core to keep the ski manageable on the skintrack. An early rise tip allows the ski to get up and over variable snow and powder, while camber underfoot and a powerful flat tail offers a secure and stable feel when you're skiing in no-fall zones or making hop turns down steep chutes. The versatile 107 mm waist will float all but the deepest powder and is manageable when conditions turn variable. Like all Icelantic skis, the Vanguard is handmade in Colorado and features original artwork by Icelantic co-founder,... Less
More

RCBS 2-Die Set 416 Weatherby...

$150.99
MidwayUSA RCBS 2-Die Set 416 Weatherby Magnum
+ $7.59 shipping
/rcbs-2die-set-416/HeSzOcr8orGtDyAxmye-Eg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS X-Die 2-Die Set 300...

$43.29
MidwayUSA RCBS X-Die 2-Die Set 300 Weatherby Magnum
+ $7.59 shipping
/rcbs-xdie-2die-set-300/15leIVHF3PX2h5FkaVugUw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

RCBS 2-Die Set 30-378...

$29.99
MidwayUSA RCBS 2-Die Set 30-378 Weatherby Magnum
+ $7.59 shipping
/rcbs-2die-set-30378/JMNHcMqOE7vJYOpgBF_SjQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Trim Die 30-378...

$30.49
MidwayUSA RCBS Trim Die 30-378 Weatherby Magnum
+ $4.99 shipping
/rcbs-trim-die-30378/aeCPKlhWk_XrHFgUhxpFUg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

RCBS 2-Die Set 460 Weatherby...

$52.49
MidwayUSA RCBS 2-Die Set 460 Weatherby Magnum
+ $7.59 shipping
/rcbs-2die-set-460/jS1yF8IudwXB-SWKyRR3lg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lee Factory Crimp Die 300...

$13.99
MidwayUSA Lee Factory Crimp Die 300 Weatherby Magnum
+ $4.99 shipping
/lee-factory-crimp-die-300/-_mpc8QJ6-W0ho3936Bidg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Timney Triggers Trigger, Fits...

$125.53
eBay Timney Triggers Trigger, Fits Weatherby Vanguard, Howa 1500, Mossberg 1500, 611
+ $4.95 shipping
/timney-triggers-trigger/6W2TxPc2AvJIxFjAx_eOBQ==/info
eBay
IN_STOCK ( In stock )
Timney Triggers Trigger, Fits Weatherby Vanguard, Howa 1500, Mossberg 1500, Black Description: Fits Wby Vanguard, Howa 1500, Mossberg 1500 Finish/Color: Black Manufacturer: Timney Triggers Manu Part No: 611 Type: Trigger UPC: 081950006113 Short Desc: TIMNEY TRIG FITS WBY VANGUARD/HOWA DETAILS This item is brand new from the manufacturer and comes with everything they include.We do our best to answer your questions quickly. We do not have every item available at our store location for us to insp
More

Hornady Custom Grade New...

$45.99
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 257 Weatherby Magnum
+ $7.59 shipping
/hornady-custom-grade-new/1daaJoAUgHuldiMC4HUZDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Hornady Custom Grade New...

$75.99
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 240 Weatherby Magnum
+ $7.59 shipping
/hornady-custom-grade-new/37IPK62kz-jnn-GbPj35yw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

RCBS 2-Die Set 300 Weatherby...

$29.99
MidwayUSA RCBS 2-Die Set 300 Weatherby Magnum
+ $7.59 shipping
/rcbs-2die-set-300/3oCccMrtPuuZCPAAnETbAQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Hornady Custom Grade New...

$45.99
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 7mm Weatherby Magnum
+ $7.59 shipping
/hornady-custom-grade-new/5pQsgTNYup8_XwsD5qPTSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Redding Master Hunter 2-Die...

$129.99
MidwayUSA Redding Master Hunter 2-Die Set 300 Weatherby Magnum
+ $8.39 shipping
/redding-master-hunter/ARTWx3zEVDATmPOsdrU8xQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Master Hunter die sets were developed after the success of the National Match die sets. Featuring the micrometer adjustable Competition Seating Die and Full Length Sizer Die, this die set helps to produce high quality ammunition to the tightest specifications. The use of a full length sizer die ensures flawless feeding just in case a follow-up shot is required. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Competition Micrometer Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335