Remington 700 Receiver Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "remington 700 receiver"
Results 1 - 40 of 1030

PTG Receiver Blueprinting...

$249.99
MidwayUSA PTG Receiver Blueprinting Reamer 1-1/16 Standard Size Piloted Remington 700 SA, 700 LA and Winchester Model 70
+ $4.99 shipping
/ptg-receiver-blueprinting/ACGgWJlCsCVfOfubJbdxCQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Using precision ground pilot bushings (sold separately), this carbide tipped reamer is designed to true the minor diameter of the action threads, the front of the locking lugs in the receiver, and the receiver face. This reamer is designed to be followed by the blueprinting tap (MidwayUSA product # 228582) to ensure concentric receiver threads. For the Remington 700 short or long action. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Sunny Hill Remington 700...

$36.00
Brownells Sunny Hill Remington 700 Maximized Recoil Lug - Ss Maximized Recoil Lug
+ $7.95 shipping
/sunny-hill-remington-700/R07XvZ2drzPnE3zRie9RVw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Machined slightly thicker than the factory part for added stiffness to eliminate lug flex or twisting under heavy recoil. Inner and outer dimensions are similar to the original, factory dimensions for a smooth, seamless receiver to barrel fit. Factory barrel installation may require setting the shoulder forward. Mfg: Sunny Hill SPECS: Chrome moly (CM), in-the-white or stainless steel (SS), natural finish. 1.72 (4.37cm) long, 1.35 (3.4cm) wide, .240 (6.10mm) thick. 1.064 (2.70cm) bore I.D. Fits Remington 700.
More

PTG Receiver Blueprinting Tap...

$249.99
MidwayUSA PTG Receiver Blueprinting Tap 1.0625-16 Standard Size Piloted Remington 700 SA, 700 LA
+ $4.99 shipping
/ptg-receiver-blueprinting/mTc1R9iJRBPoFgOPeN_pvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This tap is designed to be used after the receiver reamer and will true the barrel threads to the bolt raceway. Threads are 1.0625-16 at 60 degrees. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Remington 700 Long Action Gloss
+ $4.99 shipping
/redfield-1piece-standard/zn9AronnpfI_aE9hx5SH2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al: Steel Style: Standard Fits: Remington 700 Long Action Notes: Also Fits: BSA-Monarch Long Action Round Receiver Interarms-Howa Mossberg models 1500 and 1700 Long and Short Action Remington models 40X LA, 78 LA, 700 LA, 721 and 725 LA Ruger 77 LA round receiver Smith & Wesson models 1500, 1600 & 1700 Weatherby Mark 5 Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Long Action Rifle,1-Piece
More

Egw Remington 700, 722, 40x...

$39.99
Brownells Egw Remington 700, 722, 40x Short Action Scope Bases - Rem 700, 722, 40x Short Action 0 Moa
+ $7.95 shipping
/egw-remington-700-722/lxR3IY_vn0UCfEREiauQrA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Remington 700, 722, 40X Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wren Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket head Allen screws... Less
More

Power Custom Action Wrench...

$39.99
MidwayUSA Power Custom Action Wrench Insert Remington 700
+ $4.99 shipping
/power-custom-action/Vk8MsN0gedbM4U5J4y9zuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Action Wrench Insert works with the action wrench handle to add in removing your barrel. It is fully CNC'd from billet aluminum. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Barrel Vises, Action Wrenches & Receiver Tools
More

Egw Remington 700, 722, 40x...

$39.99
Brownells Egw Remington 700, 722, 40x Short Action Scope Bases - Rem 700, 722, 40x Short Action 20 Moa
+ $7.95 shipping
/egw-remington-700-722/s-82skYfqOievgTjNCeVLg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Remington 700, 722, 40X Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wren Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket head Allen screws... Less
More

PTG Mar-Free Action Wrench...

$79.99
MidwayUSA PTG Mar-Free Action Wrench Remington 700
+ $7.59 shipping
/ptg-marfree-action/9K7LoTlHsje8dNnUaccmDg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The PTG Action Wrench for the Remington 700 is a high quality tool that will provide a lifetime of reliable service. Designed to fit inside the bolt raceway, this action wrench will provide the maximum amount of torque without fear of slippage or marring. In fact, this action wrench can be used with scope bases still attached to the action. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Barrel Vises, Action Wrenches & Receiver Tools
More

Leupold 2-Piece Standard...

$32.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Silver
Free Shipping
/leupold-2piece-standard/JTTKvN2sDJzwpIrohr9yqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Egw Remington 700, 721, 725...

$39.99
Brownells Egw Remington 700, 721, 725 Long Action Scope Bases - Rem 700, 721, 725 Long Action 20 Moa
+ $7.95 shipping
/egw-remington-700-721/iPxV1v0sZLb_M_5eAgh48Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Remington 700, 722, 40X Long Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrenc Mfg: Egw
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Gloss
Free Shipping
/leupold-2piece-standard/Oa1236OC-USO8PSaR9OT3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Matte
Free Shipping
/leupold-2piece-standard/jJgXtIubK1HUzO26U35z-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Egw Remington 700, 721, 725...

$39.99
Brownells Egw Remington 700, 721, 725 Long Action Scope Bases - Rem 700, 721, 725 Long Action 0 Moa
+ $7.95 shipping
/egw-remington-700-721/3U0ihNI2vT0ki8PUW845NA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Remington 700, 722, 40X Long Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrenc Mfg: Egw
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Long Action Matte
Free Shipping
/leupold-1piece-standard/H_ghIWfJ5oITeZkjYqpKAQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,BSA,BSA Monarch,Long Action,1-Piece
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Long Action Gloss
Free Shipping
/leupold-1piece-standard/K4v84eZ_AbOhG3pz-Uwp5w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,BSA,BSA Monarch,Long Action,1-Piece
More

Leupold 1-Piece Standard...

$32.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Short Action Silver
Free Shipping
/leupold-1piece-standard/YhQLYjgEIb0sEGxQYsJlXg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,BSA,BSA Monarch,Short & Medium Action,1-Piece
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Short Action Matte
Free Shipping
/leupold-1piece-standard/lpWCCITeZcBCso59df0kug==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,BSA,BSA Monarch,Short & Medium Action,1-Piece
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Short Action Gloss
Free Shipping
/leupold-1piece-standard/v8OSiS9D9Q2pv9-4K7bRMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,BSA,BSA Monarch,Short & Medium Action,1-Piece
More

Leupold 2-Piece Standard...

$32.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversible Front Silver
Free Shipping
/leupold-2piece-standard/OwM6Sv0mLIXfB1AG3iTlHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversible Front Matte
Free Shipping
/leupold-2piece-standard/QxEgi_spNDx-C_ywulCs3Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversible Front Gloss
Free Shipping
/leupold-2piece-standard/roJvhzl3y5blibLmllUTmg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes:Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Long Action Left Hand Gloss
Free Shipping
/leupold-1piece-standard/f-opUeTIaLPI9y5PtMqlHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationBase Type: Standard Material: SteelNotes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Long Action Rifle,1-Piece
More

Leupold 2-Piece Standard...

$46.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversable Front with 1 High Rings Matte
Free Shipping
/leupold-2piece-standard/aWnaZEdpIGJKKkhzc4L_ZQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Rings included with sets.Technical InformationBase Type: Standard Material: SteelRing Height:(measured from base of ring to bottom of scope tube)Medium: .270High: .400Notes: Mounting Hardware IncludedRemington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Brownells Picatinny Scope...

$43.99
Brownells Brownells Picatinny Scope Base - Remington 700 Sa Aluminum Base
+ $7.95 shipping
/brownells-picatinny-scope/Qqei4SazmBIltzG6VVuJUA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screwsXXno drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Leupold 2-Piece Standard...

$46.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversable Front with 1 Medium Rings Matte
Free Shipping
/leupold-2piece-standard/lN0zNpKRbeLDX0zJxo4pKA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Rings included with sets.Technical InformationBase Type: Standard Material: SteelRing Height:(measured from base of ring to bottom of scope tube)Medium: .270High: .400Notes: Mounting Hardware IncludedRemington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725Ruger 77 (round receiver)Howa, Smith & Wesson 1500Weatherby Mark V and Vanguard Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Brownells Picatinny Scope...

$79.99
Brownells Brownells Picatinny Scope Base - Remington 700 Sa Steel Base
+ $7.95 shipping
/brownells-picatinny-scope/UGIQW7f8E-gArTU9-jXE1A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screwsXXno drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Brownells Picatinny Scope...

$54.99
Brownells Brownells Picatinny Scope Base - Remington 700 Sa 20 Moa Aluminum Base
+ $7.95 shipping
/brownells-picatinny-scope/rFRDYYdvnvR-hSaOdE4i1g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screwsXXno drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Leupold 2-Piece Dual-Dovetail...

$24.99
MidwayUSA Leupold 2-Piece Dual-Dovetail Scope Base Remington 700 Reversible Front Matte
Free Shipping
/leupold-2piece/RW3DNMlYj_kac5brI2Whtw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold's traditional all steel Dual Dovetail system is a classic, low profile mount that provide a stable mounting platform. Rear windage screws are unnecessary with this simple yet solid system. The reversible front mount option allows the front base to be mounted in a forward position for scopes with a long available mounting length, or faced rearward for optics with a limited amount of mounting length. This ensure that the proper eyerelief can be achieved with nearly any length of scope. Techncial Information Material: Steel Style: Dual Dovetail Notes: Torx screws and driver included. Fits: BSA Monarch LA/SA Remington Models 700 LA/SA, 721 LA, 722 SA, 725 LA/SA, 40X LA/SA Ruger 77 LA (Round receiver) Smith & Wesson 1500 LA Weatherby Mark 5 LA Vanguard LA Searches for products like... Less
More

Leupold 2-Piece Dual-Dovetail...

$24.99
MidwayUSA Leupold 2-Piece Dual-Dovetail Scope Base Remington 700 Gloss
Free Shipping
/leupold-2piece/4sQn5VLd16dpz8GSUxJROA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold's traditional all steel Dual Dovetail system is a classic, low profile mount that provide a stable mounting platform. Rear windage screws are unnecessary with this simple yet solid system. The reversible front mount option allows the front base to be mounted in a forward position for scopes with a long available mounting length, or faced rearward for optics with a limited amount of mounting length. This ensure that the proper eyerelief can be achieved with nearly any length of scope. Techncial Information Material: Steel Style: Dual Dovetail Notes: Torx screws and driver included. Fits: BSA Monarch LA/SA Remington Models 700 LA/SA, 721 LA, 722 SA, 725 LA/SA, 40X LA/SA Ruger 77 LA (Round receiver) Smith & Wesson 1500 LA Weatherby Mark 5 LA Vanguard LA Searches for products like... Less
More

Leupold 2-Piece Dual-Dovetail...

$24.99
MidwayUSA Leupold 2-Piece Dual-Dovetail Scope Base Remington 700 Matte
Free Shipping
/leupold-2piece/B-hSmNiJHBc7mTAC_wOAHQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold's traditional all steel Dual Dovetail system is a classic, low profile mount that provide a stable mounting platform. Rear windage screws are unnecessary with this simple yet solid system. The reversible front mount option allows the front base to be mounted in a forward position for scopes with a long available mounting length, or faced rearward for optics with a limited amount of mounting length. This ensure that the proper eyerelief can be achieved with nearly any length of scope. Techncial Information Material: Steel Style: Dual Dovetail Notes: Torx screws and driver included. Fits: BSA Monarch LA/SA Remington Models 700 LA/SA, 721 LA, 722 SA, 725 LA/SA, 40X LA/SA Ruger 77 LA (Round receiver) Smith & Wesson 1500 LA Weatherby Mark 5 LA Vanguard LA Searches for products like... Less
More

Leupold 2-Piece Dual-Dovetail...

$32.99
MidwayUSA Leupold 2-Piece Dual-Dovetail Scope Base Remington 700 Silver
Free Shipping
/leupold-2piece/uifu-i0DDsdQuqBgVlLSkw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold's traditional all steel Dual Dovetail system is a classic, low profile mount that provide a stable mounting platform. Rear windage screws are unnecessary with this simple yet solid system. The reversible front mount option allows the front base to be mounted in a forward position for scopes with a long available mounting length, or faced rearward for optics with a limited amount of mounting length. This ensure that the proper eyerelief can be achieved with nearly any length of scope. Techncial Information Material: Steel Style: Dual Dovetail Notes: Torx screws and driver included. Fits: BSA Monarch LA/SA Remington Models 700 LA/SA, 721 LA, 722 SA, 725 LA/SA, 40X LA/SA Ruger 77 LA (Round receiver) Smith & Wesson 1500 LA Weatherby Mark 5 LA Vanguard LA Searches for products like... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Low
+ $4.99 shipping
/talley-lightweight/1xVHlNJBq3HFXD1pxBH2Uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Extra Low Matte
+ $4.99 shipping
/talley-lightweight/BNzUhdG1WBT0jN6WaaNAnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte Low
+ $4.99 shipping
/talley-lightweight/Mo2FgwqU7eaa_Hr7X6LuNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Medium
+ $4.99 shipping
/talley-lightweight/dUGdQ7Q1jiWKV_YZ1e5K0Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte High
+ $4.99 shipping
/talley-lightweight/hun2JgeOyvBmd_dCixMahQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte High
+ $4.99 shipping
/talley-lightweight/m6xxmfaI0J9H4aLTZJ2j4A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Extended Front Remington 700 Matte Medium
+ $4.99 shipping
/talley-lightweight/6A9RDZphZv7eMvKJJMSOMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Diameter: 1 Ring Height: .600 from bottom of scope tube to receiver Fits: Remington 700 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,Mounting Systems
More

Talley Lightweight 2-Piece...

$38.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Extended Rings Remington 700 Matte Low
+ $4.99 shipping
/talley-lightweight/83V1pU9giG_-4ckz7AAytA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Style: Standard Fits: Remington 700 Ring Height: .400 from bottom of ring opening to rifle receiver Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,Mounting Systems
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Remington 700, Howa 1500 (8x 40 Screws) Matte
+ $4.99 shipping
/talley-2piece-scope-base/57iEQbZ2wsQYixkPdoAROQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these bases feature a double recoil shoulder designed to hold scopes with absolute rigidity under severe recoil. Talley bases work with Talley rings only. The included mounting hardware is 8x 40 screws and may require the receiver to be drilled and tapped for proper installation. Technical InformationMateri al: Steel Style: Quick Detach Notes: Mounting hardware included. Available with extended or standard lenght front base .175 high Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,2-Piece,Rear & Front Sets
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443