Category

Optics Accessories
Showing results for "remington 700 receiver"
Results 1 - 40 of 810

Remington 700 Action Wrench -...

$79.99
Brownells Remington 700 Action Wrench - Surgeon Action Wrench
+ $7.95 shipping
/remington-700-action/7w-L96XR0R8d1H5HslVs1w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-use alternative to old-fashioned T-handle action wrenches is specifically designed to prevent damage to receiver when installing and removing barrels. Lets you torque a Remington 700 or Surgeon Rifles action as close as possible to the barrel threads to eliminate unwanted twisting or bowing of the action that can result in distorted bolt raceways and other expensive damage. Inserts in the ejection port; the two ears fit in the raceways at the front ring. Insert a drive ratchet handle or torque wrench and tighten/loosen the action to the barrel. Works on any length action. Mfg: Surgeon Rifles SPECS: Steel, black oxide finish. Fits Remington 700 and Surgeon Rifles receivers. Do not exceed 100 foot pounds torque.
More

PTG Receiver Blueprinting...

$228.99
MidwayUSA PTG Receiver Blueprinting Reamer 1-1/16 Standard Size Piloted Remington 700 SA, 700 LA and Winchester Model 70
+ $3.99 shipping
/ptg-receiver-blueprinting/ACGgWJlCsCVfOfubJbdxCQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Using precision ground pilot bushings (sold separately), this carbide tipped reamer is designed to true the minor diameter of the action threads, the front of the locking lugs in the receiver, and the receiver face. This reamer is designed to be followed by the blueprinting tap (MidwayUSA product # 228582) to ensure concentric receiver threads. For the Remington 700 short or long action.
More

Bolt Lapping Tools - One Gun...

$52.99
Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Remington 700
+ $7.95 shipping
/bolt-lapping-tools-one/bRYcX5epKChsgkOj6MdWSg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit popular actions listed below. Mfg: Brownells SPECS: 3 (9.5cm) long, lb. (340 g). M14/M1A Set sleeve includes large diameter plunger and special lapping handle required for these models. Mauser Large sleeve fits large ring Mauser actions. Mauser Small fits small ring Mauser actions. Savage Small sleeve fits Savage acti
More

Leupold 2-Piece Standard...

$32.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Silver
Free Shipping
/leupold-2piece-standard/JTTKvN2sDJzwpIrohr9yqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725 Ruger 77 (round receiver) Howa, Smith & Wesson 1500 Weatherby Mark V and Vanguard
More

Light Weight Scope Mount -...

$48.95
Brownells Light Weight Scope Mount - Fits Remington 700 30mm, Medium
+ $7.95 shipping
/light-weight-scope-mount/jdIYcCjv-7AyvZlgh56pdw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5/8 wide, with four, TORX screws, to keep large scopes from slipping or shifting. Designed by Mel Forbes of New Ultralight Arms. Mfg: Talley SPECS: 7000 series aluminum, black, anodized, matte finish. Accepts 1 dia. scopes, unless otherwise listed in fits column for 30mm dia. scopes. Height from bottom of ring to top of receiver: Low - .400 (10.1mm), Med - .500 (12.7mm). High - .640 (16.3mm), X-High - .740 (18.8mm). Approx. we
More

Leupold Standard Scope Base...

$46.99
MidwayUSA Leupold Standard Scope Base Remington 700
Free Shipping
/leupold-standard-scope/icpmGJ3ZXnwU2SzvPXrs7w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725 Ruger 77 (round receiver) Howa, Smith & Wesson 1500 Weatherby Mark V and Vanguard
More

Leupold 2-Piece Standard...

$32.99
MidwayUSA Leupold 2-Piece Standard Scope Base Remington 700 Reversible Front Silver
Free Shipping
/leupold-2piece-standard/OwM6Sv0mLIXfB1AG3iTlHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725 Ruger 77 (round receiver) Howa, Smith & Wesson 1500 Weatherby Mark V and Vanguard
More

Leupold 1-Piece Standard...

$32.99
MidwayUSA Leupold 1-Piece Standard Scope Base Remington 700 Short Action Silver
Free Shipping
/leupold-1piece-standard/YhQLYjgEIb0sEGxQYsJlXg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard steel bases are designed specifically to withstand the toughest recoil. Model specific 1-piece bases provide solid mounting options for your rifle. The 2-piece bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. 2-piece bases will fit right or left handed short and long actions. Bases accept any Standard-style rings. Technical Information Base Type: Standard Material: Steel Notes: Mounting Hardware Included Remington 700 bases will fit similar configurations below: Remington Models 40X LA, 721, 725 Ruger 77 (round receiver) Howa, Smith & Wesson 1500 Weatherby Mark V and Vanguard
More

Egw Remington 700 Long Action...

$35.00
eBay Egw Remington 700 Long Action 10 Moa Sporter Picatinny Scope Mount
Free Shipping
/egw-remington-700-long/r4G-a0RV0RA7WjBHRNB9Xw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Made in the USA!Machined from: Domestic 6061 T6 Extruded Aluminum right here in our Quakertown Pennsylvania shop.Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 4.485The middle spread is the distance between the two middle holes, center to center, on your receiver.This auction is for a 10 MOA Sporter mount. It has an enlarged ejection port and is shorter than our standard Remington 700 Long Action scope mount.Our Sporter mount offers three cross slots
More

Remington Model 700 Integral...

$21.77
Walmart.com Remington Model 700 Integral Scope Mounts, Medium, Black
+ $4.97 shipping
/remington-model-700/qKmlLaPuS5SeXrDWPgUE_Q==/info
Walmart.com
IN_STOCK ( In stock )
Precision machined in the USA, these lightweight integral scope mounts allow for quick and easy scope mounting, centering and alignment without the need for drilling or tapping. Constructed of Z-2 alloy, 50 percent stronger than aluminum and powder-coated with a matte black finish for rust resistance, the all-in-one base and lower ring create a super strong design. Eight hardened steel Torx head screws retain top ring half and clamp base to factory receiver holes. It fits long and short action Remington 700 rifles (with exception of .338 Lapua).
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Remington 700, Howa 1500 (8x 40 Screws)
No Shipping Info
/talley-2piece-scope-base/zz_2ucofp1fC2yq5nqP6sA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these bases feature a double recoil shoulder designed to hold scopes with absolute rigidity under severe recoil. Talley bases work with Talley rings only. The included mounting hardware is 8x 40 screws and may require the receiver to be drilled and tapped for proper installation. Technical InformationMateri al: Steel Style: Quick Detach Notes: Mounting hardware included. Available with extended or standard lenght front base .175 high
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Remington 700, Howa 1500 (8x 40 Screws) Matte
+ $3.99 shipping
/talley-2piece-scope-base/57iEQbZ2wsQYixkPdoAROQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these bases feature a double recoil shoulder designed to hold scopes with absolute rigidity under severe recoil. Talley bases work with Talley rings only. The included mounting hardware is 8x 40 screws and may require the receiver to be drilled and tapped for proper installation. Technical InformationMateri al: Steel Style: Quick Detach Notes: Mounting hardware included. Available with extended or standard lenght front base .175 high
More

Talley Lightweight 2-Piece...

$41.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte Medium
+ $3.99 shipping
/talley-lightweight/CpRvmDVi0sVNx7-7GLuYWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$41.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte Low
+ $3.99 shipping
/talley-lightweight/Mo2FgwqU7eaa_Hr7X6LuNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Medium
+ $3.99 shipping
/talley-lightweight/dUGdQ7Q1jiWKV_YZ1e5K0Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$41.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte High
+ $3.99 shipping
/talley-lightweight/hun2JgeOyvBmd_dCixMahQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral Rings Remington 700, Howa Matte
No Shipping Info
/talley-lightweight/l23JxQx_ShTZ539-fhSU6Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte High
+ $3.99 shipping
/talley-lightweight/m6xxmfaI0J9H4aLTZJ2j4A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

Dednutz 14700 Gamereaper...

$54.99
eBay Dednutz 14700 Gamereaper Scope Mount Remington 700-short Low Blk
Free Shipping
/dednutz-14700-gamereaper/acHJmmaGzVHY7tGx02iBPg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical Information Material: Aluminum, anodized Notes:Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the aver
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Extended Front Remington 700 Matte Medium
+ $3.99 shipping
/talley-lightweight/6A9RDZphZv7eMvKJJMSOMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Diameter: 1 Ring Height: .600 from bottom of scope tube to receiver Fits: Remington 700
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Extended Rings Remington 700 Matte Low
+ $3.99 shipping
/talley-lightweight/83V1pU9giG_-4ckz7AAytA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Style: Standard Fits: Remington 700 Ring Height: .400 from bottom of ring opening to rifle receiver Notes: Mounting Hardware Included
More

Remington 700 Tactical...

$21.99
Brownells Remington 700 Tactical Multi-Slot Scope Base - Rem. 700 Sa Base
+ $7.95 shipping
/remington-700-tactical/xSVMQgbeBq4hya2jKPgcOA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
One-piece, precision machined Weaver rail lets you mount scopes, red-dot sights, ghost-ring sights, and other optics using Weaver-style rings. Plenty of cross-slots allow optimal ring spacing for a wide range of scopes including compact, full-size, and extra-long scope tubes. Low-profile, open center design allows use of front sight when optics are removed. Lightweight aluminum reduces weight without compromising strength. Hardcoat anodized for additional strength and wear resistance. Attaches to factory drilled and tapped receivers using the included steel mounting screws. Mfg: Atk SPECS: Aluminum, anodized finish, matte black. Steel mounting screws. Short Action (SA) - 57/8 (14.9cm) long. Long Action (LA) - 6 (15.8cm) long. Fits Rem 700, 78, 40X-L, 721, and 725. Accepts Weaver-style... Less
More

Nightforce 1-Piece 40 MOA...

$116.00
MidwayUSA Nightforce 1-Piece 40 MOA Picatinny-Style Scope Base Remington 700 Short Action Matte
Free Shipping
/nightforce-1piece-40-moa/j718Xks66CCEbNm4Ww3otA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Designed to exceed Military specifications, these steel mounts from Nightforce are tested for unfailing, repeatable performance. Bases are constructed from heat-treated, high-strength steel and CNC machined from a single steel billet to closely match the receiver contour. Gunsmith blanks include no mounting hardware and require fitting to specific action.Technical InformationMateri al: Steel Style: Picatinny rail Notes: Cant is built in to base Base extends approximately 2 over barrel Integral recoil lug machined on the bottom of the base extends into the ejection port of the receiver Torx drive mounting screws included
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700, Howa Matte Extra-High
+ $3.99 shipping
/talley-lightweight/mJgnosX0gmdQXu08F6HViA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Remington 700 Short Action Matte High
+ $3.99 shipping
/dnz-products-game-reaper/N4PX49dpJlGz733Rvtl_nA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Nightforce 1-Piece 20 MOA...

$116.00
MidwayUSA Nightforce 1-Piece 20 MOA Picatinny-Style Scope Base Remington 700 Long Action Matte
Free Shipping
/nightforce-1piece-20-moa/QKSlrBFOsb4Y5Ln_Edqv6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Designed to exceed Military specifications, these steel mounts from Nightforce are tested for unfailing, repeatable performance. Bases are constructed from heat-treated, high-strength steel and CNC machined from a single steel billet to closely match the receiver contour. Gunsmith blanks include no mounting hardware and require fitting to specific action.Technical InformationMateri al: Steel Style: Picatinny rail Notes: Cant is built in to base Base extends approximately 2 over barrel Integral recoil lug machined on the bottom of the base extends into the ejection port of the receiver Torx drive mounting screws included
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Remington 700 Short Action Matte Low
+ $3.99 shipping
/dnz-products-game-reaper/_HeLj4qc8DqzKmu2R2z6bQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Remington 700 Long Action Silver Medium
+ $3.99 shipping
/dnz-products-game-reaper/jVPBTX0AL7MDyq4dpdkWCA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Remington 700 Long Action Matte Medium
+ $3.99 shipping
/dnz-products-game-reaper/rRpnn3zThDNs7ZSb4kgo9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Nightforce 2-Piece 20 MOA...

$87.00
MidwayUSA Nightforce 2-Piece 20 MOA Picatinny-Style Scope Base Remington 700 Short Action Matte
Free Shipping
/nightforce-2piece-20-moa/Dbg_-IVGtL-JAtIxMp_Xyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Designed to exceed Military specifications, these steel mounts from Nightforce are tested for unfailing, repeatable performance. Bases are constructed from heat-treated, high-strength steel and CNC machined from a single steel billet to closely match the receiver contour. Gunsmith blanks include no mounting hardware and require fitting to specific action.Technical InformationMateri al: Steel Style: Picatinny rail Notes: Cant is built in to bases Torx drive mounting screws included
More

Speedlock Firing Pin Kits -...

$67.99
Brownells Speedlock Firing Pin Kits - Remington 700 Short Action Kit
+ $7.95 shipping
/speedlock-firing-pin-kits/2plUMJ8tGtmIC6XyZHexTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Aluminum/steel or titanium firing pins weigh less than half of original factory firing pins, and the weight savings alone would decrease lock times dramatically. But, for even faster lock times and to help ensure positive ignition, the Tubb Firing Pins come with a factory weight chrome silicon spring. CS springs maintain load height and compression strength without taking a set for thousands of compression cycles. Faster lock time means there's less chance of gun movement between the time the trigger is pulled and the firing pin hits the primer. Tubb Firing Pins cut lock time without increasing vibrations AND maintain positive ignition. Designed by NRA Highpower Rifle and Highpower Si Mfg: Superior Shooting SPECS: Firing Pin - 70 series machined aluminum with 4140 steel tips. Spring -... Less
More

DNZ Products Game Reaper...

$69.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 30mm Integral Rings Remington 700 Short Action Matte Low
+ $3.99 shipping
/dnz-products-game-reaper/1DVUpiywnzN-4onUXSwakg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$69.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 30mm Integral Rings Remington 700 Short Action Matte Medium
+ $3.99 shipping
/dnz-products-game-reaper/8H6yFI4dbrVIT_ilpnDDVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$69.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 30mm Integral Rings Remington 700 Long Action Matte Medium
+ $3.99 shipping
/dnz-products-game-reaper/JpjfB304aVF-otC0PiWhaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$69.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 30mm Integral Rings Remington 700 Short Action Matte High
+ $3.99 shipping
/dnz-products-game-reaper/cbwNHbz9yz5p1XuEcO4dTQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Remington 700 Short Action...

$1,099.99
Brownells Remington 700 Short Action Benchrest Chassis System - Amcs Benchrest For Remington 700 Sa
+ $15.95 shipping
/remington-700-short/MLj8a9d0JPIyOLkyWGIDNw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The new Advanced Modular Chassis System is the direct result oflong-range shooting.The JP chassis delivers the best of all worlds. The cheek piece can be raised to accommodate an AR-15-type optics mounting system like the JPFTSM-30 with the line of bore relative to shoulder identical to the gas gun. Combined with the palm shelf grip, you have the most comfortable chassis system with the most linear impulse feel and reduced muzzle rise possible. For a more traditional bolt gun setup, you need only lower the cheek piece and use your preferred standard height rings. The Advanced Modular Chassis System is completely machined from 6061 T6 aircraft-grade aluminum with a mil-standard Mfg: J P Enterprises
More

DNZ Hunt Master 2-Piece Scope...

$56.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Remington 700, Howa 1500, Weatherby Vanguard Silver High
+ $3.99 shipping
/dnz-hunt-master-2piece/9B5mh8CaO_vu05ZeihRrvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .730 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$56.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Remington 700, Howa 1500, Weatherby Vanguard Matte Medium
+ $3.99 shipping
/dnz-hunt-master-2piece/H0RGSpVJfZyBNOs99O3S8g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .730 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$56.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Remington 700, Howa 1500, Weatherby Vanguard Silver Medium
+ $3.99 shipping
/dnz-hunt-master-2piece/Z3yjwHgE0NNTrWrt5lYzNA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .730 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$56.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Remington 700, Howa 1500, Weatherby Vanguard Matte Low
+ $3.99 shipping
/dnz-hunt-master-2piece/okF33d6EF0w9_TzCRqaiRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .730 Notes Integral scope rings... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145