Category

Tools and Accessories
Showing results for "reamer sharpening"
Results 1 - 40 of 1500+

Stens Ridge Reamer

$59.99
Sears Stens Ridge Reamer
+ $6.95 shipping
/stens-ridge-reamer/DQdPOBndWUlC670peuZi9Q==/info
Sears
IN_STOCK ( In stock )
Stens Replacement Ridge Reamer For small motors 2 to 3 bore , This will prevent recurring trouble , For correct ring job, the upper ridge in the cylinder must be removed
More

Norton Hard Arkansas...

$14.49
MidwayUSA Norton Hard Arkansas Sharpening Stone Square 3 x 1/4 x 1/4 Ultra-Fine
+ $4.99 shipping
/norton-hard-arkansas/qc1XtbrwikmxftKrqxYrcw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Square Arkansas stones for stoning edges on precision cutters, reamer edges etc. 3x1/4. Technical InformationArkans as Stone: Produces the finest edge possible while maintaining extremely close tolerances. Will also produce a highly polished finish.
More

Norton Hard Arkansas...

$14.49
MidwayUSA Norton Hard Arkansas Sharpening Stone Triangle 3 x 1/4 Ultra-Fine
+ $3.99 shipping
/norton-hard-arkansas/ywNzYnbCB6EQr_0rVOwGvg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Square Arkansas stones for stoning edges on precision cutters, reamer edges etc. 3x1/4. Technical InformationArkans as Stone: Produces the finest edge possible while maintaining extremely close tolerances. Will also produce a highly polished finish.
More

RIDGID 34577 Reamer Blade For...

Free Shipping
2 stores RIDGID 34577 Reamer Blade For 1224 26092 Threading Machine
More

Stens Ridge Reamer

$102.99
Sears Stens Ridge Reamer
Free Shipping
/stens-ridge-reamer/DQdPOBndWUlC670peuZi9Q==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Stens Replacement Ridge Reamer For small motors 2 to 3 bore , This will prevent recurring trouble , For correct ring job, the upper ridge in the cylinder must be removed
More

PTG Tooling Floating Reamer...

$113.99
MidwayUSA PTG Tooling Floating Reamer Holder
+ $7.19 shipping
/ptg-tooling-floating/B-1kLFw-trLe_i63V8tEQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Reamer Holder completely supports the reamer in the lathe for hands-free reaming. 3 thumb screws offer complete adjustment for perfect alignment with the bore. #3 MT shank Technical InformationMateri al: Steel Notes: Fully supports reamer and is adjustable to center the pilot Provides 360° support of the reamer
More

NORTON 61463686841 Abrasive...

$498.73
Walmart.com NORTON 61463686841 Abrasive Sharpening File Kit, 35 Pieces
Free Shipping
/norton-61463686841/jbrFSsMysJ-S64Rb2Jq8kQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Abrasive Sharpening File Kit, Number of Pieces 35, Abrasive Material Various, Various Grit, Grade Various, Includes Durable Vinyl Roll with (1) Auger Bit Stone, (3) Benchstone, (1) Bevel, (2) Diamond, (1) Flat, (1) Half Round, (1) India Point, (2) Knife Blade, (1) Oval, (1) Penknife, (1) Pointed, (1) Reamer Stone, (2) Round Edge Slip, (5) Round, (8) Silversmith, (2) Square, (1) Taper Round, (1) Taper Triangle, and (2) Triangular Files Features Includes : Durable Vinyl Roll with (1) Auger Bit Stone, (3) Benchstone, (1) Bevel, (2) Diamond, (1) Flat, (1) Half Round, (1) India Point, (2) Knife Blade, (1) Oval, (1) Penknife, (1) Pointed, (1) Reamer Stone, (2) Round Edge Slip, (5) Round, (8) Silversmith, (2) Square, (1) Taper Round, (1) Taper Triangle, and (2) Triangular Files Item : Abrasive... Less
More

55268 Chucking Reamer, 1 3/4...

$273.91
Zoro 55268 Chucking Reamer, 1 3/4 In, 1.75 In
Free Shipping
/55268-chucking-reamer-1/0zWDPBOjlA41UWk80GeEFQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 1.7500 In.,Size 13/4 In.,Number of Flutes 10,Flute Length 4 In.,Overall Length 131/2 In.,Bright Finish,Shank Type Straight,Shank Size 1.2500 In.,Chamfer 45 Degrees
More

PTG Floating Reamer Holder

$107.99
MidwayUSA PTG Floating Reamer Holder
+ $4.99 shipping
/ptg-floating-reamer-holder/CfaIFu5R7YA6HkhFcM56DA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Holder is designed to allow free movement of a floating reamer in 3 directions: vertical, horizontal and angular, as required for proper performance of any floating reamer. Technical InformationNotes: Free-floats in horizontal, vertical and angular directions Morse taper #3
More

4352 Chucking Reamer, 2.0000...

$524.85
Zoro 4352 Chucking Reamer, 2.0000 In
Free Shipping
/4352-chucking-reamer/S1sFEAUPh1SvcYOpgoiZgA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Spiral,Spiral Direction Right Hand,Cutting Direction Right Hand,High Speed Steel,Dimension Type Decimal Inch,Decimal Equivalent 2.0000 In.,Size 2.0000 In.,Number of Flutes 12,Flute Length 4 In.,Overall Length 14 In.,Bright Finish,Shank Type Straight,Shank Size 1.4990 In.
More

14331 Chucking Reamer, 1 In,...

$154.37
Zoro 14331 Chucking Reamer, 1 In, 1.0000 In
Free Shipping
/14331-chucking-reamer-1/Y2HgzLRQRxa9LfC5WPrEMA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Cobalt,Dimens ion Type Decimal Inch,Decimal Equivalent 1.0000 In.,Size 1.0000 In.,Number of Flutes 8,Flute Length 23/4 In.,Overall Length 8 In.,Bright Finish,Shank Type Straight,Shank Size 1.0000 In.
More

GearWrench Engine Cylinder...

$65.59
Sears GearWrench Engine Cylinder Ridge Reamer
+ $6.99 shipping
/gearwrench-engine/6dfXEezyCCiM1SeBVrP-tg==/info
Sears
IN_STOCK ( In stock )
Reamer removes ridges from top of engine cylinders with bore diameters 3 to 5 in. (77 to 127mm). Tungsten carbide cutters and fine-thread feed-up ensure smooth cutting action.
More

55324 Chucking Reamer, 1 3/8...

$168.82
Zoro 55324 Chucking Reamer, 1 3/8 In, 1.375 In
Free Shipping
/55324-chucking-reamer-1/ae0htJVRnWIHf-mXpswyCA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 1.3750 In.,Size 13/8 In.,Number of Flutes 8,Flute Length 31/4 In.,Overall Length 12 In.,Bright Finish,Shank Type Straight,Shank Size 1.0000 In.,Chamfer 45 Degrees
More

55272 Chucking Reamer, 2 In,...

$286.79
Zoro 55272 Chucking Reamer, 2 In, 2 In
Free Shipping
/55272-chucking-reamer-2/bCCOyFtsBv6NSGNUUvbUVg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 2.0000 In.,Size 2 In.,Number of Flutes 12,Flute Length 41/4 In.,Overall Length 14 In.,Bright Finish,Shank Type Straight,Shank Size 1.5000 In.,Chamfer 45 Degrees
More

55266 Chucking Reamer, 1 5/8...

$244.11
Zoro 55266 Chucking Reamer, 1 5/8 In, 1.625 In
Free Shipping
/55266-chucking-reamer-1/cgKc3ySnzOMhlbXnhwE4CA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer, Through Hole, Straight, Cutting Direction Right Hand, Carbide Tipped, Dimension Type Fractional Inch, Decimal Equivalent 1.6250 In., Size 15/8 In., Number of Flutes 8, Flute Length 33/4 In., Overall Length 13 In., Bright Finish, Shank Type Straight, Shank Size 1.2500 In., Chamfer 45 Degrees
More

Plunger Tube Reamer - Plunger...

$29.99
Brownells Plunger Tube Reamer - Plunger Tube Reamer Set
+ $7.95 shipping
/plunger-tube-reamer/jJ1vfHdpQaCjE_4j0IEYZw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extra long reamers return the plunger tube to correct I.D. after staking - and provide plenty of spring clearance for positive operation. Mfg: Brownells SPECS: Tool steel reamers. Approximately 7-1/2 (17.7cm) long. Includes (1) .0925 (2.34mm) and (1) .108 (2.74mm) diameter reamer.
More

55312 Chucking Reamer, 1 3/16...

$116.88
Zoro 55312 Chucking Reamer, 1 3/16 In, 1.1875 In
Free Shipping
/55312-chucking-reamer-1/duu7ncJ4s0wZqHBLzU478Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 1.1875 In.,Size 13/16 In.,Number of Flutes 8,Flute Length 27/8 In.,Overall Length 11 In.,Bright Finish,Shank Type Straight,Shank Size 1.0000 In.,Chamfer 45 Degrees
More

55304 Chucking Reamer, 1 1/16...

$103.38
Zoro 55304 Chucking Reamer, 1 1/16 In, 1.0625 In
Free Shipping
/55304-chucking-reamer-1/jzWtpGfaBbGhKTGuLbSlig==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer, Through Hole, Straight, Cutting Direction Right Hand, Carbide Tipped, Dimension Type Fractional Inch, Decimal Equivalent 1.0625 In., Size 11/16 In., Number of Flutes 8, Flute Length 23/4 In., Overall Length 101/2 In., Bright Finish, Shank Type Straight, Shank Size 0.8750 In., Chamfer 45 Degrees
More

55308 Chucking Reamer, 1 1/8...

$135.81
Zoro 55308 Chucking Reamer, 1 1/8 In, 1.125 In
Free Shipping
/55308-chucking-reamer-1/tPEZZomfsmnddAf14E0bjQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 1.1250 In.,Size 11/8 In.,Number of Flutes 8,Flute Length 27/8 In.,Overall Length 11 In.,Bright Finish,Shank Type Straight,Shank Size 0.8750 In.,Chamfer 45 Degrees
More

12 Sharpening Stone

$2.89
WebstaurantStore 12 Sharpening Stone
No Shipping Info
/12-sharpening-stone/UQHGwIduNebpHZc2mLqKRA==/info
WebstaurantStor e
IN_STOCK ( In stock )
This 12 sharpening stone is made of the finest quality aluminum carbide stone for general sharpening of hand tools and cutlery. The dark side is 120 grit, and the light side is 240 grit. Overall Dimensions: Length: 12 Width: 2 1/2 Height: 1 1/2 G-2512
More

NOVA 35018 Sharpening Center

$89.99
CPO Outlets NOVA 35018 Sharpening Center
+ $6.99 shipping
/nova-35018-sharpening/P-pp6r0Qq4gZT2GVMf71Jw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Sharpening Center - 35018. Sliding Platform. Adjustable Arm. Finger Grind Unit - 35053. Fasteners. Precision sharpening with controlled slideway gives you the benefit of a grinding machine at your bench grinder. Finger grind attachment can revive chisels up to 1 in and is lightweight so that it feels like an extension of your hand enabling the feel and control of the grind. Achieve precise angle setting with notched scales throughout to find your favorite grind angle. Top plate is easily removable and reassembled to complete different types of sharpening. Slideway makes dressing easy since the wheel is perfectly parallel and flat
More

Craftsman #4 Tap/Reamer Wrench

$15.19
Sears Craftsman #4 Tap/Reamer Wrench
+ $6.50 shipping
/craftsman-4-tapreamer/Xs5Lgn8s4F9f3LIYzO8Enw==/info
Sears
IN_STOCK ( In stock )
Gain a Strong Grip When Tapping Threads with the Craftsman #4 Tap/Reamer WrenchInsert the square drive into a metal hole and rotate the handle on Craftsman s #4 Tap/Reamer Wrench to cut out screw threads. Building mechanics, professional repairmen, artists and avid do-it-yourselfers commonly use this tool when making repairs, as it allows any user to turn any piece of metal into a screw thread. This design provides a superior grip and features adjustable, self-equalizing jaws to prevent slipping. The T-handle adjusts to provide ample leverage in even the smallest spaces. Tap threads or create your own with the strong, adjustable and durable Craftsman #4 Tap/Reamer Wrench.
More

Work Sharp Guided Knife...

$34.99
Cabela's Work Sharp Guided Knife Sharpening System Upgrade Kit
+ $8.95 shipping
/work-sharp-guided-knife/FWHlKPcZ68EMXm6-_5GfLQ==/info
Cabela's
IN_STOCK ( In stock )
Expand your Work Sharp Guided Sharpening system to repair damaged blades, sharpen a wider range of tools, or create the ultimate cutting edge! The Guided Sharpening System Upgrade Kit includes two additional Diamond Plates (Extra Coarse 220 grit and Extra Fine 800 grit), and a Leather Strop Kit with angle guides and 0.5 micron honing compound. The Diamond Plates and Leather Strop are 6 x 1.25 and are designed to fit the Guided Sharpening System. The Extra Coarse Diamond Plate (220 grit) allows you to expand your sharpening capabilities to common tools, and is ideal for removing material quickly when repairing or re-profiling a knife. The Extra Fine Diamond Plate (800 grit) offers a refined sharpening experience, ideal when re-sharpening a knife or other fine edge tool. The Leather Strop... Less
More

Battery Clamp Spreader /...

$13.99
2xPower Battery Clamp Spreader / Reamer
Free Shipping
/battery-clamp-spreader/TvxjJTnFITSQmlqGdvyUHQ==/info
2xPower
IN_STOCK ( In stock )
Store not rated
Free Shipping
Spread auto terminal connectors with this pair of reamers.
More

MP-080 - Draft Beer Reamer...

$45.95
Beverage Factory.com MP-080 - Draft Beer Reamer Drill Bit
+ $3.77 shipping
/mp080-draft-beer/AiLGdW-XhJuX_fE9hAf2cA==/info
Beverage Factory.com
IN_STOCK ( In stock )
1/4 Draft Beer Reamer Drill Bit
More

General Tools T-Handle Reamer

$13.79
MidwayUSA General Tools T-Handle Reamer
+ $4.99 shipping
/general-tools-thandle/qVV0IC0ComzPxMzAHsQqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
With a precision- machined, tempered tool steel reamer attached to a stout T-handle for leverage, the chores of removing burrs and rough edges from holes will take far less time and effort to accomplish. The reamer measures 1/2 at its largest diameter and tapers steadily to a minimum diameter of 1/8, and can be used on most common materials including steel, brass, aluminum, plastic and wood. Technical InformationFeatur es:(from the manufacturer's website) Made of hardened and tempered tool steel with precision ground cutting edges T-handle provides leverage for easier reaming
More

Smith's Diamond Stone...

$35.95
Lowe's Smith's Diamond Stone Precision Sharpening Kit DPSKP
+ $5.99 shipping
/smiths-diamond-stone/mc4EiPL1Bl8zb0vqq04CSQ==/info
Lowe's
IN_STOCK ( In stock )
Sharpens all types of knives including blades with serrated or scalloped edges. Takes the guesswork out of freehand sharpening and guarantees consistent angle sharpening every time. Includes diamond and natural Arkansas stone bars along with guide rods vise honing solution and instructions.
More

Gilchrist Precision Choke...

$99.99
Brownells Gilchrist Precision Choke Reamer - 20/16ga. ''''c'''' Reamer
+ $7.95 shipping
/gilchrist-precision-choke/GyedP27wZLMRH_Yall1Pdw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Enters through the breech and pilots off the bore for precise cutter to bore alignment. Expandable, angle blade reamer fine tunes choke size to improve patterns or removes choke prior to screw-in choke tube installation. Requires two Clymer Choke Tooling Bushings to center the cutter in the bore. Requires purchase of the Gilchrist Handle and two of the proper Clymer bore bushings for use with any of the reamers. Mfg: Chadwick & Trefethen SPECS: Steel. Handle 25-½ (65cm) long. Reamers 13 (33cm) long. Expansion range: 20ga.-C .593- .656. 12ga.- D .656 - .718. E .718 - .781. Select correct diameter bushing for 12 and 20 gauge from Clymer chart
More

Baker Adjustable Reamer Size...

$31.49
MidwayUSA Baker Adjustable Reamer Size 3/A .406 to .437 Diameter for 410 Bore Choke Alterations
+ $3.99 shipping
/baker-adjustable-reamer/Nzm3YgAVheXTgaB0rgH35A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

PTG T-Handle Reamer Extension

$41.49
MidwayUSA PTG T-Handle Reamer Extension
+ $7.19 shipping
/ptg-thandle-reamer/UFQASJDg54rmXsnjBZ-n6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 9 extension fits any PTG reamer with a 3/8 square drive shank. It allows the reamer to be used when a standard tap handle will not work.
More

Revolver Cylinder Throating...

$80.00
Brownells Revolver Cylinder Throating Reamer - .45 Cal. Throat Reamer
+ $7.95 shipping
/revolver-cylinder/SdT0rPnvCYOKmdJNLak0Jw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy to use, hand turned reamer opens the cylinder throat to a uniform diameter for best accuracy with lead and jacketed bullets. Removable pilots let you select the correct pilot for the closest possible fit to individual chambers. .45 Cal. corrects out of spec, smaller-than-bore- diameter cylinder throats on .45 Colt and other .45 caliber revolvers. Opens throat to .4525. Provided with .4480 diameter pilot. .44 Cal. fits .44 Magnum, .44 Special and .44-40 revolvers. Opens throat to .431. Furnished with .4270 pilot. .357 Cal. from .3545 to .357. Open the throat to .358. .357 furnished with a .354 pilot. Pilot Packs contain six additional p Mfg: Manson Precision SPECS: High-speed steel. 4 (10cm) long, ¼ shank, 6 flute, helical ground.
More

HUOT 12000 Reamer Index, Steel

$24.14
Zoro HUOT 12000 Reamer Index, Steel
+ $5.00 shipping
/huot-12000-reamer-index/0iewsEAcs2X995Ce6As-2g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Reamer Index, Holds A to Z, Steel, Overall Case Width (In.) 4, Overall Case Depth (In.) 821/64, Overall Case Height (In.) 13/16, Number of Compartments 26, Number of Drawers 1, Lock Included No, Tools Not Included
More

Spyderco Slip Sharpening...

$56.99
MidwayUSA Spyderco Slip Sharpening Stone 2 X 4
Free Shipping
/spyderco-slip-sharpening/W659fgM4zDLhyXJvLLFqEg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Features USA made from alumina ceramic Suede carrying case provides a non-slip surface Teardrop shaped for sharpening those unique blades Tools and blades come in so many different shapes and sizes, and when used regularly require sharpening. Their variety generates the need for shaped sharpening stones. Slip-shaped stones are great for sharpening curved blades, woodworking tools, plane irons and sophisticated shaped edges. When viewed in profile, slip stones are teardrop shaped. They hone flat, concave, convex edges and bring slant-edge and straight chisels to their sharpened best. Spyderco's fine grit ceramic slip stone is flat, thin and ultra smooth for professionally finishing and sharpening. They're made from Alumina Ceramic, a process where a bonding agent is combined with Alumina... Less
More

Paderno Fine Sharpening Stone...

$31.41
Everything Kitchens Paderno Fine Sharpening Stone (600 Grit) - 18251-02
No Shipping Info
/paderno-fine-sharpening/GVIgr-qt-HgMo5KP9LYbzw==/info
Everything Kitchens
IN_STOCK ( In stock )
Store not rated
Paderno Fine Sharpening Stone (600 Grit) The Fine Sharpening Stone from Paderno-- courtesy of Paderno-World Cuisine--is a 600-grit sharpening stone made of silicone carbide. This fine-grade whetstone is the final of two steps for sharpening kitchen blades and knives to a razor edge. When used in conjunction with the Paderno Coarse Sharpening Stone , The Paderno Fine Sharpening Stone can return your favorite instruments back to their factory sharpness. Paderno-World Cuisine is the coming-together of culinary experts Paderno of Canada and World Cuisine of America. Today the company distributes across the globe with its unique kitchen solutions and acclaimed cookware. Paderno Fine Sharpening Stone (600) Features: 600-grit whetstone: for sharpening kitchen blades to a razor edge Silicone... Less
More

Case V Knife Sharpening Kit

$29.99
MidwayUSA Case V Knife Sharpening Kit
Free Shipping
/case-v-knife-sharpening/c4bmrPAvyGtILnmx3FqJlg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Case V Knife Sharpening Kit features a solid wood base that holds two 6 soft Arkansas sharpening stones in a V shape. This set up allows you to get the perfect angle on your knives blades without having to fight a stone laying flat on a countertop. Kit Includes: Two 6 soft Arkansas sharpening stones Solid wood base Honing oil
More

Baker Adjustable Reamer Size...

$34.99
MidwayUSA Baker Adjustable Reamer Size D .656 to .718 Diameter for 16 and 12 Gauge Choke Alterations
+ $3.99 shipping
/baker-adjustable-reamer/b4bFlNFxVZNXNFgszjQi2g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

GENERAL 130 Reamer,Pipe,T...

$10.92
Walmart.com GENERAL 130 Reamer,Pipe,T Handle
+ $5.00 shipping
/general-130-reamerpipet/85IkP12J8VPONM1WGPJ_UA==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Pipe Reamer, Capacity 1/8 to 1/2 Inch, Length 5 5/8 Inches Features Capacity (In.) : 1/8 a 1/2 Overall Length (In.) : 5-5/8 Function : For Removing Burrs From Cut Pipe, Tubing And Conduit, Enlarging/Counter -sinking Holes In Sheet Metal, Plastic And Other Material Handle Type : T Item : Pipe Reamer Blade Material : Hardened, Tempered Tool Steel Handle Material : Hardened, Tempered Tool Steel For Material Thickness : 1/8 to 1/2
More

Baker Adjustable Reamer Size...

$33.99
MidwayUSA Baker Adjustable Reamer Size C .593 to .656 Diameter for 20 and 16 Gauge Choke Alterations
+ $3.99 shipping
/baker-adjustable-reamer/zxCZTdHn4kxZtURCXvnhEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392