Rcbs Reloading Dies 7.62x39 Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "rcbs reloading dies 7.62x39"
Results 1 - 40 of 1500+

RCBS Reloading Press...

$19.99
MidwayUSA RCBS Reloading Press Maintenance Kit
+ $8.39 shipping
/rcbs-reloading-press/cqesy3BOak0oUUacE1DBuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Reloading Press Maintenance Kit is an exceptional kit that is designed to keep reloading presses in top-notch operating condition. The kit comes with everything necessary to remove dirt, oil and other unwanted contaminants from every imaginable nook and cranny on a reloading press. The included brush is great to fit those tight spots on any press and brush away the grime. Once the grime has been removed just spray down the press with the included rust preventative and press lube and the press is ready for storage. Technical Information Fits: Any reloading press Function: Keeps reloading equipment in top-notch operating condition Includes: 6oz Aerosol bottle of Press Lube (Lubricant/Protec tant) 10oz Aerosol bottle of Press Storage (Rest Preventative) Double ended Nylon bristled... Less
More

RCBS Seater Die 7.62x39mm

$25.99
MidwayUSA RCBS Seater Die 7.62x39mm
+ $4.99 shipping
/rcbs-seater-die-762x39mm/6J3yQpwfG9GpBSY2zC7_YQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body.
More

RCBS AR Series Small Base...

$43.99
MidwayUSA RCBS AR Series Small Base 2-Die Set with Taper Crimp 7.62x39mm
+ $7.59 shipping
/rcbs-ar-series-small-base/WtQmFT06ndesNdZYyX0KNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style, semi-automatic, pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths; helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. These... Less
More

RCBS 2-Die Set 7.62x45mm Czech

$150.99
MidwayUSA RCBS 2-Die Set 7.62x45mm Czech
+ $7.59 shipping
/rcbs-2die-set-762x45mm/AOFyJek2ZfTWjAEUOrQb-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Trim Die 7.62x54mm...

$35.99
MidwayUSA RCBS Trim Die 7.62x54mm Rimmed Russian
+ $4.99 shipping
/rcbs-trim-die-762x54mm/dMDx5v66YEWPS8hZGsQrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Rcbs Series A Full Length Die...

$42.60
eBay Rcbs Series A Full Length Die Set 7.62x39 35001
Free Shipping
/rcbs-series-a-full-length/SknWaBLW3XjOiyDltwM5Og==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Home About Us Shipping Returns Contact RCBS Series A Full Length Die Set 7.62x39 35001 Click to view full size Full Size Image Click to close full size. RCBS Series A Full Length Die Set 7.62x39 35001 RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent h
More

RCBS 2-Die Set 7.62x54mm...

$35.49
MidwayUSA RCBS 2-Die Set 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $7.59 shipping
/rcbs-2die-set-762x54mm/l6afVCCfcBFEEOQD3y8HgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Full Length Sizer Die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The Seater Die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS Includes 311 diameter expander button, 308 diameter expander button available from RCBS.
More

RCBS 3-Die Set 7.62mm Russian...

$168.99
MidwayUSA RCBS 3-Die Set 7.62mm Russian Nagant (7.62x38mmR)
+ $7.59 shipping
/rcbs-3die-set-762mm/sZpTajQpA5sEgpHlb_KFOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

RCBS Neck Sizer Die 7.62x54mm...

$37.99
MidwayUSA RCBS Neck Sizer Die 7.62x54mm Rimmed Russian
+ $4.99 shipping
/rcbs-neck-sizer-die/w9OVhLn7mtar-5TeuQ5TqQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy. Technical InformationMateri al: Steel Die Type: Neck Sizer Die (with expander- decapping unit) Accessories: Plastic Storage Case Notes: Neck Sizer Dies size only the neck of the case (not the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy
More

RCBS Case Forming Die Set...

$243.99
MidwayUSA RCBS Case Forming Die Set 7.62mm Tokarev from 223 Remington
+ $7.59 shipping
/rcbs-case-forming-die-set/fRg4QYPIu2p2BTbphDI0Tg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Case Forming Dies are used to create brass cases for very hard to find or expensive cartridges out of readily available brass. They are designed to change the case in small steps to eliminate excessive stress on the brass. After forming and trimming, the cases must be full length sized for final forming. These sets may consist of one trim die or a whole set containing up to three dies, expander ball, ream die and reamer depending on the case being formed. Instructions are included with each set.Technical InformationMateri al: Steel Die Type: Forms the 7.62mm Tokarev from the 223 Remington Accessories: Plastic storage case Notes: Includes the neck ream die, trim die, inside neck reamer, & extended shellholder.
More

RCBS Full Length Sizer Die...

$30.99
MidwayUSA RCBS Full Length Sizer Die 7.62x54mm Rimmed Russian
+ $4.99 shipping
/rcbs-full-length-sizer/okdOM3f9K4r6FkJBFayCZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Full Length Sizer Dies for bottle neck cases have vents to prevent case damage caused by trapped air and to release excessive lubricants. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

RCBS Partner Single Stage...

$194.99
MidwayUSA RCBS Partner Single Stage Reloading Press Kit
+ $13.24 shipping
/rcbs-partner-single-stage/7ClIbEd3qpuJD4_IU_GwEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Partner Press anchors this excellent starter kit. Big on performance, small on price, the Partner is the ideal entry-level press. Here it’s coupled with some of the finest “basic” reloading tools you’ll find anywhere. All RCBS reloading kits include the Universal Case Loading Block, .17-.60 Debur Tool and the Accessory Handle—2. Accessory Base Plate not included. The RCBS Partner Single Stage Press is easy to use, incredibly durable and reloads most standard calibers. This inexpensive press offers big performance in a compact package and is also perfect for range use or as a second press for different operations. It features a compound leverage system, durable steel links and a priming arm that eliminates the need for a separate priming tool. Dies and shellholder sold separately... Less
More

RCBS Turret Deluxe Reloading...

$439.99
MidwayUSA RCBS Turret Deluxe Reloading Press Kit
+ $17.99 shipping
/rcbs-turret-deluxe/6B5_WCA_MoHbTtLz5UVCqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
With the RCBS Turret Deluxe Reloading Kit you'll only need to add a Reloading Die Set and Shell Holder for the caliber(s) you intend to reload and you will be up and reloading your own quality ammunition in no time! The RCBS Turret Press features a rugged cast iron frame, toggle block and turret head. The six-station turret head allows many combinations in the mounting sequence of dies and powder measure and even permits two or more calibers to be set up at the same time. Turret head held in place by one bolt for quick, easy changeovers. Turret pin and ball handle assembly can be positioned for right or left-hand use. Primer plugs and sleeves are supplied for seating large and small primers. Dies and shellholder sold separately. Technical InformationPress Type: Turret Press Auto Index:... Less
More

RCBS 2-Die Neck Sizer Set...

$56.99
MidwayUSA RCBS 2-Die Neck Sizer Set 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $7.59 shipping
/rcbs-2die-neck-sizer-set/g1zTuActM_0_6n5DFm7Zfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes A Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately. Includes 311 diameter expander button, 308 Diameter expander button available from RCBS. Technical InformationMateri al: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Extended Shellholder #32...

$28.49
MidwayUSA RCBS Extended Shellholder #32 (22 PPC, 6mm PPC, 7.62x39mm)
+ $4.99 shipping
/rcbs-extended-shellholder/CA2vtEn4C9VWd_cm-Ij2tQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for working short cases. Perfect for using the RCBS Competition Seating Die or Trim Die. Works for single stage presses only.Technical InformationMateri al: Steel Fits: 7.62x39mm Russian 6mm PPC Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

RCBS Shellholder 7.62mm...

$22.49
MidwayUSA RCBS Shellholder 7.62mm Russian Nagant (7.62x38mmR)
+ $4.99 shipping
/rcbs-shellholder-762mm/PK1K1EHrPBTWDZILJspa_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Technical Information Fits: 7.62mm Russian Nagant
More

RCBS Die Maintenance Kit

$24.99
MidwayUSA RCBS Die Maintenance Kit
+ $8.39 shipping
/rcbs-die-maintenance-kit/22q5bBxzrTGrRZL6oPh2cw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Die Maintenance Kit is great for keeping reloading dies in top notch operating condition. This kit comes with everything necessary to remove dirt, oil and other unwanted contaminants from everyplace imaginable with reloading dies. The included brush is perfect to loosen caked on grime on any die. Once the grime is removed easily spray down the die with the included die cleaner to wash all the oils and dirt away then coat with a light spray from the can of die storage spray and the dies are ready to store until their next reloading session. Technical Information Fits: Designed to work with any reloading die Function: Keep reloading dies in pristine condition Material: Aerosol Cleaner and Rust Inhibitor and RCBS Brush Set with handle
More

Lee Quick Trim Die 7.62x39mm

$9.99
MidwayUSA Lee Quick Trim Die 7.62x39mm
+ $4.99 shipping
/lee-quick-trim-die/eeRX9q90AC6U3Ln1lWtO7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

RCBS Piggyback, AmmoMaster,...

$33.49
MidwayUSA RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Shellplate #32 (7.62x39mm)
+ $4.99 shipping
/rcbs-piggyback/DeBUitFYHhXE2BOZwqwkvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
For use with the RCBS Piggyback, Ammomaster and Pro2000 progressive presses only. Will not fit RCBS 4x4 press. Technical Information Press: RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Notes: Will not work with the RCBS 4x4 Progressive Press Fits: 7.62x39mm Russian6mm PPC
More

Lyman 2-Die Set 7.62x39mm

$37.99
MidwayUSA Lyman 2-Die Set 7.62x39mm
+ $7.59 shipping
/lyman-2die-set-762x39mm/nDbz-fRVtq66aiunD_Xjbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available. Lyman Precision Die Sets are crafted on state of the art computer controlled equipment insuring that each die is perfectly dimensioned. Each rifle sizing die is vented to prevent trapped air that can damage cartridge cases, polished, heat treated for toughness and then receives a final micro-finish polish for extra smoothness. Lyman 2 die rifle sets are perfect for loading jacketed bullets in bottleneck cases. Includes full length sizing die and bullet seating die with a... Less
More

Rcbs Rock Chucker Supreme...

$349.99
Academy Sports and Outdoors Rcbs Rock Chucker Supreme Master Reloading Kit (0076683093547)
+ $7.25 shipping
/rcbs-rock-chucker-supreme/m6a_u-h7M4sNum4IB6zZIA==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The RCBS Rock Chucker Supreme Master Reloading Kit comes with the tools and accessories needed to reload most pistol and rifle cartridges.
More

Series A Full-Length Die...

$45.45
Daniel Outdoors Series A Full-Length Die 7.62X39
+ $5.99 shipping
/series-a-fulllength-die/O5BXjHgLvCZ_wyb9Ut5qrA==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Type: 2 Die SetFits: 7.62x39mm
More

Redding 2-Die Set 7.62x39mm

$66.49
MidwayUSA Redding 2-Die Set 7.62x39mm
+ $7.59 shipping
/redding-2die-set/LSL01PioUsJykzTQarEP-A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

RCBS Lock-Out Die

$50.99
MidwayUSA RCBS Lock-Out Die
+ $4.99 shipping
/rcbs-lockout-die/qmst5tQA-oAOueUvt9tdTw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Lock-Out Die is the perfect die to run in a progressive reloading press to determine if a case has been overcharged with powder or undercharged with powder. The die features 7/8-14 threads to work in any standard progressive press. The Lock-Out Die detects a no powder or double charged case and will lock-up the press movement so you can fix the problem before proceeding. Works for straight wall pistol cases only 9mm Luger and Larger. 2 Cartridge Adaptors (1 Large, 1 Small). Technical Information Material: Steel Accessories: Plastic storage case 2 Cartridge Adaptors (1 Large, 1 Small) Notes: This die comes assembled from RCBS with a spring loaded plunger. How the Die Works: Once the die is set to check for the desired powder charge a plunger on the inside of the die lines up with... Less
More

Lee RGB 2-Die Set 7.62x39mm

$19.99
MidwayUSA Lee RGB 2-Die Set 7.62x39mm
+ $4.99 shipping
/lee-rgb-2die-set/QpQvfA7Ty8zl_CBl8vanGA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a great set of utility dies at a great price! RGB stands for Really Great Buy, These dies may be inexpensive but that does not mean that these dies are not manufactured to the strictest tolerance. These dies are made to have tolerances that are 50% closer than the advertised amount of a very popular and expensive brand. Full length sizer die, bullet seating die, and storage box included. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Easy Adjust Dead Length Bullet Seating Die Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shellholder, powder dipper or load data.
More

RCBS Neck Reamer Die...

$99.99
MidwayUSA RCBS Neck Reamer Die 5.45x39mm Russian
+ $4.99 shipping
/rcbs-neck-reamer-die/mmT8yp2dtyJSsCZTnplp6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS neck reamer dies are used in conjunction with RCBS neck reamers in order to remove material from the inside of a case neck that has been downsized with a form die. This step is required when an excess of material has built up in the case neck as a result of neck diameter reduction. The die serves the purpose of preserving the outer dimensions of the case neck during the reaming process. Technical InformationMateri al: Steel Product Usage: A neck reamer, with the corresponding neck reamer die, is used to remove material from the inside of the neck of a cartridge. This is usually necessary when case forming from another cartridge. The neck reamer is the cutting tool and the neck reamer die holds the case in position. Neck reamers and neck reamer dies are caliber specific and cannot be... Less
More

Lee Factory Crimp Die...

$12.49
MidwayUSA Lee Factory Crimp Die 7.62x39mm
+ $4.99 shipping
/lee-factory-crimp-die/AGI_WJepRhcscTpH4fUHyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 7.62x39mm
+ $7.59 shipping
/lee-pacesetter-3die-set/-bH1Feq3fOLIpThVY4EY6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

Redding Seater Die 7.62x39mm

$43.49
MidwayUSA Redding Seater Die 7.62x39mm
+ $4.99 shipping
/redding-seater-die/uQRGxXjAsGMWg-D5RSrKnw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

Redding Deluxe 3-Die Set...

$109.99
MidwayUSA Redding Deluxe 3-Die Set 7.62x39mm
+ $8.39 shipping
/redding-deluxe-3die-set/SPqbB8Xw2aOllgOByLqk3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

RCBS 2-Die Set 6.5x68mm

$61.99
MidwayUSA RCBS 2-Die Set 6.5x68mm
+ $7.59 shipping
/rcbs-2die-set-65x68mm/1T3tZB4ezUT5AqhO7RNXow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS 2-Die Set 9.3x74mm Rimmed

$61.99
MidwayUSA RCBS 2-Die Set 9.3x74mm Rimmed
+ $7.59 shipping
/rcbs-2die-set-93x74mm/45-73r7epRQF-g-BFosgvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS 2-Die Set 5.7x28mm FN

$61.99
MidwayUSA RCBS 2-Die Set 5.7x28mm FN
+ $7.59 shipping
/rcbs-2die-set-57x28mm-fn/lEz_isUdcAKJv326jsqajA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS 2-Die Set 7.5x54mm...

$61.99
MidwayUSA RCBS 2-Die Set 7.5x54mm French MAS
+ $7.59 shipping
/rcbs-2die-set-75x54mm/sANlUDSVDR01iOxexaZiwg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS 2-Die Set 7-30 Waters

$35.49
MidwayUSA RCBS 2-Die Set 7-30 Waters
+ $7.59 shipping
/rcbs-2die-set-730-waters/49QmkAz6Ha4wKtwbpxSpzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 7.62x39mm
+ $7.59 shipping
/hornady-custom-grade-new/xsrDBT91yuOU4wXsDCspIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

7.62x39mm SB T/C Die Set

$56.95
Daniel Outdoors 7.62x39mm SB T/C Die Set
+ $5.99 shipping
/762x39mm-sb-tc-die-set/dSj0d8fee0YezS1VpNsLwQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
The RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style, semi-automatic, pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. These... Less
More

RCBS Piggyback, AmmoMaster,...

$25.35
MidwayUSA RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Shellplate #13 (7.62x54mm Russian)
+ $4.99 shipping
/rcbs-piggyback/GAaVB7Eb43v7hFNZSIm6LQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
For use with the RCBS Piggyback, Ammomaster and Pro2000 progressive presses only. Will not fit RCBS 4x4 press. Technical Information Press: RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Notes: Will not work with the RCBS 4x4 Progressive Press Fits: 7.62 X 54 Russian
More

Lee Reloading Stand Die Rack

$11.99
MidwayUSA Lee Reloading Stand Die Rack
+ $4.99 shipping
/lee-reloading-stand-die/urzrri7wbJ5ANbRHaa-dTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Reloading Stand was designed just for the purpose of holding a reloading press so reloader could load up ammunition. Lee engineered these accessories to help ensure the loading process is as smooth as possible. The Die Rack was specially designed for the reloader looking to conveniently hold dies at the ready especially when loading up small batches of ammunition with frequent die changes. The great thing about the die rack is that it can either be mounted to the Lee Reloading Stand or mounted to any wall. Technical Information Fits: Lee Reloading Stand or can be mounted to any wall Function: Holds up to three dies in a convenient location Material: Steel
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388