rare earth magnets

Lift magnet is ideal for lifting, holding, and moving small steel plate and round, forging, die casting, and similar item in industrial processing plants, fabrication and machine shops, and warehouses. Lifting strength varies depending on the thickness and composition of ferrous metal surface being lifted. For safety, the actual breakaway force is 3 times greater than the maximum lifting rate. The surface must be clean, placed in contact with magnet, and cover the entire length and width of the magnet to properly engage and release. Magnet lift is not designed to lift multiple pieces at the same time or vertical steel surfaces. Magnet lift is not recommended for painted or finish coated surfaces. Holding values are based on ideal conditions. Pipe length, wall thickness, diameter,... Less

Lift magnet is ideal for lifting, holding, and moving small steel plate and round, forging, die casting, and similar item in industrial processing plants, fabrication and machine shops, and warehouses. Lifting strength varies depending on the thickness and composition of ferrous metal surface being lifted. For safety, the actual breakaway force is 3 times greater than the maximum lifting rate. The surface must be clean, placed in contact with magnet, and cover the entire length and width of the magnet to properly engage and release. Magnet lift is not designed to lift multiple pieces at the same time or vertical steel surfaces. Magnet lift is not recommended for painted or finish coated surfaces. Holding values are based on ideal conditions. Pipe length, wall thickness, diameter,... Less

Lift magnet is ideal for lifting, holding, and moving small steel plate and round, forging, die casting, and similar item in industrial processing plants, fabrication and machine shops, and warehouses. Lifting strength varies depending on the thickness and composition of ferrous metal surface being lifted. For safety, the actual breakaway force is 3 times greater than the maximum lifting rate. The surface must be clean, placed in contact with magnet, and cover the entire length and width of the magnet to properly engage and release. Magnet lift is not designed to lift multiple pieces at the same time or vertical steel surfaces. Magnet lift is not recommended for painted or finish coated surfaces. Holding values are based on ideal conditions. Pipe length, wall thickness, diameter,... Less

Disc Magnet, Type Rare Earth, Height 0.197 In, Thickness 0.197 In, Dia 0.250 In, Size 0.658 Oz, Max Pull 2.0 Lb, Stability Temp 300 Deg F, Sintered Neodymium Iron Boron, Nickel Plated, Package Quantity 5

Neodymium-iron-bor on is a fancy way to say super strong magnets. A single 1 magnet has more than 10 lbs of pull; two of them face-to-face are virtually inseparable. Smaller ones make phantastic door catches that can pull a twisted cabinet door straight and hold it closed. Use them to hold knockout bars to lathes, chuck keys to drill presses and blade wrenches to table saws. Rare earth magnets have innumerable applications on jigs, fixtures and hardware as well. Handle with care! Separated magnets can snap back and pinch skin.

Countersunk Rare Earth Magnets 25mm x 5mm North Pole Facing Out Marked Countersunk 5mm hole for #10 Screw Dimensions:25mm od x 5mm thick with countersunk 5mm hole for #10 screw Tolerances: ±0.004 x ±0.004 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Weight: 0.590 oz. (16.7 g) Max. Pull Force (generated between a single magnet and a thick, ground, flat steel plate): 20.51 lbs Max. Pull Force (generated with a single magnet sandwiched between two thic

Countersunk Rare Earth Magnets 25mm x 5mm South Pole Facing Out Marked Countersunk 5mm hole for #10 Screw Dimensions:25mm od x 5mm thick with countersunk 5mm hole for #10 screw Tolerances: ±0.004 x ±0.004 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Weight: 0.590 oz. (16.7 g) Max. Pull Force (generated between a single magnet and a thick, ground, flat steel plate): 20.51 lbs Max. Pull Force (generated with a single magnet sandwiched between two thic

Rare Earth Disc Magnets | Magnet Type: Rare Earth | Diameter: 0.2500 (decimal Inch)

Disc Magnet, Rare Earth, Thickness 0.187 In, Dia 1.000 In, Size 0.1 Oz, Max Pull 14.5 Lb, Stability Temp 300 Deg F, Sintered Neodymium, Nickel-plated

FREE Shipping to The US and Reduced Shipping to Canada Neodymium Rare Earth Magnets Neodymium Iron Boron (NdFeB) are great for a variety of crafts. Magnets can also be used for thousands of other helpful tasks around the house.They have a compact size but they are UNBELIEVABLY STRONG!They measure in size D1/8 x 1/8, n35 , Ni coating THESE MAGNETS ARE TINY!!!Please keep away from younger children and pets ***Great Quality******Fast Shipping*** Powered by eBay Turbo Lister The free listing tool

Disc Magnet, Type Rare Earth, Height 0.187 In, Thickness 0.187 In, Dia 0.500 In, Size 0.174 Oz, Max Pull 4.0 Lb, Stability Temp 572 Deg F, Sintered Samarium Cobalt, Silver

Disc Magnet, Type Rare Earth, Height 0.187 In, Thickness 0.187 In, Dia 0.500 In, Size 0.174 Oz, Max Pull 5.0 Lb, Stability Temp 482 Deg F, Sintered Samarium Cobalt, Silver

1/8 x 1/4 Shielded Rare 1 Pole Earth Magnet 2 Piece New DESCRIPTION / SPECS: Diameter (Inch): 1/8 Length (Inch): 1/4 Average Magnetic Pull (Pounds): 0.100 Maximum Magnetic Pull (Pounds): 0.200 Wall Thickness (Decimal Inch): 0.0180 Number of Poles: 1 CON

Rare Earth Disc Magnets | Magnet Type: Rare Earth | Diameter: 0.3750 (decimal Inch)

Magnetic Plate, Magnet Type Rare Earth, Length 7 In, Width 15 1/2 In, Height 1 3/16 In, Cutout Length 5 1/2 In, Cutout Width 14 In, Max Pull on Contact 100 Ounces At 1 In Gap With 1/8 In Thick X 1 In Wide X 3 In Long Steel Test Plate, Temp Range 0 to 150 F, Intensity Range 5700 Gauss, Flange Width 15 1/2 In, Housing Material 304 SS, Includes Handle Rare EarthMilled 400 stainless steel tapered step prevents wash-off of captured contaminants. 1-3/16H.Plate MagnetsRemove ferrous contamination from product stream in spouts, ducts, and pipes. Can be installed on underside of angled chutes where product flows directly over the magnet face, or suspended over conveying lines or vibratory type conveyors. Pinge-style hinges for easy trap door installation and cleaning. All stainless steel with 3/4... Less

This stick on surface mount QUANTITY 10 MAGNETS (TAPE ONLY no screw holes) with 3M tape on magnet. Discounts available for Volume quantities. Measures 1-1/2 (L) x 3/8 (H) x 1/4(D) Surface mount Urethane/acrylic 3M tape bond improves with age ABS Plastic Enclosure Temperature Range -40 to 150F (-40 to 65C) Hermetically sealed Reed Switch Encapsulated in Polyurethane for a shatter resistant magnet enclosure Email with questions BEFORE you purchase.Please ask if you need something other than wh

Countersunk Rare Earth Magnets 25mm x 5mm North Pole Facing Out Marked Countersunk 5mm hole for #10 Screw Dimensions:25mm od x 5mm thick with countersunk 5mm hole for #10 screw Tolerances: ±0.004 x ±0.004 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Weight: 0.590 oz. (16.7 g) Max. Pull Force (generated between a single magnet and a thick, ground, flat steel plate): 20.51 lbs Max. Pull Force (generated with a single magnet sandwiched between two thic

Countersunk Rare Earth Magnets 25mm x 5mm South Pole Facing Out Marked Countersunk 5mm hole for #10 Screw Dimensions:25mm od x 5mm thick with countersunk 5mm hole for #10 screw Tolerances: ±0.004 x ±0.004 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Weight: 0.590 oz. (16.7 g) Max. Pull Force (generated between a single magnet and a thick, ground, flat steel plate): 20.51 lbs Max. Pull Force (generated with a single magnet sandwiched between two thic

Lot of 100 Rare Earth Magnets Permanent 15.25X3.25mm New Click to Enlarge Click to Enlarge Lot of 100 New Permanent Ring Magnets Permanent magnet Grade: N32 MGOe Size 15.25X3.25 mm ( approx 5/8 diameter by 1/8 thick) Coating NiCuNi (N) The hole in the middle is beveled out on one side, I would assume so a screw would sit flat. We usually ship the business day after we receive your payment, but on occasion the 2nd day Check out our other items we are always happy to combine shipping. Click o

Rare Earth Disc Magnets | Magnet Type: Rare Earth | Diameter: 0.3750 (decimal Inch)

Lot of 50 Rare Earth Magnets Permanent 15.25X3.25mm New Click to Enlarge Click to Enlarge Lot of 50 New Permanent Ring Magnets Permanent magnet Grade: N32 MGOe Size 15.25X3.25 mm ( approx 5/8 diameter by 1/8 thick) Coating NiCuNi (N) The hole in the middle is beveled out on one side, I would assume so a screw would sit flat. We usually ship the business day after we receive your payment, but on occasion the 2nd day Check out our other items we are always happy to combine shipping. Click on

Mini Q-Man Yellow Bendable Rare Earth Magnet These mini Q-Men bendable magnets turn out to be a real crowd pleaser! They're just loads of fun and practical, too. Each mini Q-Man is a flex rubber stick man magnet that can be bent in a number of poses. With magnets at the ends of their arms and legs, you get 4 magnets in one. Translucent magnets perfect for the fridge, file cabinet, bulletin board - wherever you hold your photos, notes, lists and more. The bodies are made of PVC rubber, with extra strong rare-earth magnets capable of holding several pages of paper with one magnet. Each magnet measures 2.25 inches tall. Suitable for age 5 and up. For additional colors, do an Amazon search for Berryware Gifts.

Ring Magnet, Type Rare Earth, Height 0.197 In, Thickness 0.197 In, Dia 1.378 In, Hole Dia 0.827 In, Size 0.250 Oz, Max Pull 2.0 Lb, Stability Temp 300 Deg F, Bonded Neodymium, Silver

Supper Strong Neodymium Rare Earth Magnets For Sale! Top quality, factory price, fast shipping! More Products Descriptions Available On Our Official Website: Products Description Tolerances: 0.005 x 0.005 Material: NdFeB Grade: N40 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Our Quality Guarantee: All of our Neodymium(NdFeB) magnets are Neodymium(NdFeB) patent licensed. We are the only distributor specified by one of the leading Neodymium manufacture

Rare Earth Disc Magnets | Magnet Type: Rare Earth | Diameter: 0.2500 (decimal Inch)

Rare earth magnets are the strongest type of permanent magnet currently made. They are amazingly powerful for their size and have innumerable uses. These cylinder magnets are 0.250 inch (6.4mm) diameter, 0.125 inch (3.2mm) inside diameter and 0.250 inch (6.4mm) long. They are magnetized through the length. They are composed of grade 40 neodymium iron boron magnetic material and are plated in nickel-copper-nick el for a shiny corrosion resistant finish. Maximum working temperature is 176 F (80 C). Their individual pull force is approximately 2.6 lbs. Magnets may chip and crack if allowed to snap together. WARNING: VERY STRONG MAGNETS. KEEP OUT OF REACH OF CHILDREN. THIS IS NOT A TOY. DO NOT INGEST OR INHALE. SEEK IMMEDIATE MEDICAL ATTENTION IF MAGNET(S) ARE SWALLOWED OR INHALED. MAGNETS... Less

Countersunk Rare Earth Magnets 10 mm x 3.1 mm South Pole facing out Countersunk for #4 Screw Dimensions:10 mm od x 3.1 mm thick with countersunk hole for #4 screw Tolerances: ±0.004 x ±0.004 x ±0.004 x ±0.004 P lating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Weight: 0.0532 oz. (1.51 g) Max. Pull Force (generated between a single magnet and a thick, ground, flat steel plate): 3.56 lbs Max. Pull Force (generated with a single magnet sandwiched between

Supper Strong Neodymium Rare Earth Magnets For Sale! Top quality, factory price, fast shipping! More Products Descriptions Available On Our Official Website: Products Description Tolerances: 0.005 x 0.005 Material: NdFeB Grade: N40 Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Our Quality Guarantee: All of our Neodymium(NdFeB) magnets are Neodymium(NdFeB) patent licensed. We are the only distributor specified by one of the leading Neodymium manufacture

Magnetic Grate, Rectangular, Magnet Type Rare Earth, Length 6 In., Width 6 In., Height 1 1/2 In., Max. Pull on Contact 80 Ounces At The Surface With 1/4 In Diameter Steel Test Ball, Temp. Range 0 to 150 F, Intensity Range 10700 Gauss, Free Flowing Material Powder or Granular GratesRectangular and Round Permanent Magnetic Grates and Tubes1-dia. magnetic tubes on 2 centers provide a 1 gap for material flow-through. 1-1/2H.Remove ferrous contamination in hoppers, chutes, floor openings, and other areas where free-flowing granular or powdered materials are present. Liquidtight, all stainless steel construction.