Precision Square Home and Garden - Shopping.com
Showing results for "precision square"
Results 1 - 40 of 1500+

Manson Precision Bolt Face...

$100.00
Brownells Manson Precision Bolt Face Truing Tools - Tooling Block, Only
+ $7.95 shipping
/manson-precision-bolt/lcHCmXXk5TVvzKo9KOEy0g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Carbide facing burr requires only hand tools to cut the bolt face square and concentric to the boltway. Saves man hours and setup time. Tooling block locates in the front receiver ring; turn the facing burr with a slow speed drill motor. Use after bolt lapping and squaring receiver face. Mfg: Manson Precision SPECS: High speed steel, carbide cutter head. Fits Remington 700 receivers. Use requires Tooling Block and one Facing Burr.
More

QA1 Precision Products 8272-5...

$139.43
Autoplicity QA1 Precision Products 8272-5 Shock Small Alum C-O 13 -20 Eye-B/eye-B
+ $12.15 shipping
/qa1-precision-products/OSoVoTpoXXyrfje4Avc_RQ==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 8272-5 Shock Small Alum C-O 13 -20 Eye-B/eye-B V2-5 QA1 Precision Products SHOCK SML ALUM C-O 13 -20 EYE-B/EYE-B V2-5
More

QA1 Precision Products 6072-8...

$129.47
Autoplicity QA1 Precision Products 6072-8 SHOCK LRG ALUM 13 -20 EYE-B/EYE-B V2-8
+ $12.15 shipping
/qa1-precision-products/UszabmEHZJg7NV_12nBs0A==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 6072-8 SHOCK LRG ALUM 13 -20 EYE-B/EYE-B V2-8 QA1 Precision Products SHOCK LRG ALUM 13 -20 EYE-B/EYE-B V2-8
More

Norton Hard Arkansas...

$14.99
MidwayUSA Norton Hard Arkansas Sharpening Stone Square 3 x 1/4 x 1/4 Ultra-Fine
+ $4.99 shipping
/norton-hard-arkansas/qc1XtbrwikmxftKrqxYrcw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Square Arkansas stones for stoning edges on precision cutters, reamer edges etc. 3x1/4. Technical InformationArkans as Stone: Produces the finest edge possible while maintaining extremely close tolerances. Will also produce a highly polished finish. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Polishing Tools, Stones, Hones & Abrasives,Stones
More

Stanley Premium Die-Cast...

$13.36
Walmart.com Stanley Premium Die-Cast Handle Combination Square, 16, 46-131
+ $5.97 shipping
/stanley-premium-diecast/n_ZyxjeFb_FVpzF8tqEMLg==/info
Walmart.com
IN_STOCK ( In stock )
This Stanley Combination Square, 46-131, has durably etched, stainless steel blades. Each of them is rust resistant and made to last. The 12 combination square has precision- machined working surfaces for accuracy. Each is created with a high-visibility yellow handle. The built-in scriber on this Stanley square comes with a premium die-cast handle and measures 16.
More

QA1 Precision Products 8274-5...

$139.43
Autoplicity QA1 Precision Products 8274-5 Shock Small Alum C-O 13 -20 Eye-B/eye-B
+ $12.15 shipping
/qa1-precision-products/oYd99BV5gAvtHyI7-VMUdA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 8274-5 Shock Small Alum C-O 13 -20 Eye-B/eye-B V4-5 QA1 Precision Products SHOCK SML ALUM C-O 13 -20 EYE-B/EYE-B V4-5
More

Empire Pocket Combination...

$7.99
Northern Tool Empire Pocket Combination Square - 6 Inch Length, Blue
+ $5.99 shipping
/empire-pocket-combination/ufqvRQ1EWi53bIeGRxJ7zQ==/info
Northern Tool
IN_STOCK ( In stock )
The Empire 6in. pocket combination square with etched stainless steel blade is a great tool for any carpenter. The steel blade has inch graduations, machined square head, self-aligning draw bolt and hardened scriber. It also offers a True Blue vial for accuracy. Empire Level is the home of True Blue, the most accurate vials in the world. The newly designed True Blue Series of levels and squares are engineered to provide maximum accuracy, extreme durability, and enhanced readability with the strongest warranty in the industry. The blue fluid in our level vials is Empire's unique symbol of superior accuracy and a trademark of Empire Level Mfg. Corp. U.S.A. Measures Inches/angles, Dimensions L x W in. 6 x 1, Foldable No, Material Steel, Case Included No, Angle Reference 90/45 marking... Less
More

Manson Precision Nowlin...

$72.95
Brownells Manson Precision Nowlin Chamber Reamers - 9mm
+ $7.95 shipping
/manson-precision-nowlin/IPHfLmLtIAPSg-yIsahDOg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Specially ground, reduced-diameter pilots fit the tighter bore specifications used on all Nowlin barrels. Will also provide a satisfactory fit in most other brands of barrels. Each smooth-cutting, six-flute reamer is precision ground with an integral throater and solid, fixed pilot. Mfg: Manson Precision SPECS: M7 high speed steel. Six straight flutes with right hand cut. 3/8 (6.3mm) square drive shank.
More

QA1 Precision Products 8274-3...

$139.43
Autoplicity QA1 Precision Products 8274-3 Shock Small Alum C-O 13 -20 Eye-B/eye-B
+ $12.15 shipping
/qa1-precision-products/tJUGN3F6H9IoOjN9gtDr0w==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 8274-3 Shock Small Alum C-O 13 -20 Eye-B/eye-B V4-3 QA1 Precision Products SHOCK SML ALUM C-O 13 -20 EYE-B/EYE-B V4-3
More

QA1 Precision Products 8295-3...

$153.46
Autoplicity QA1 Precision Products 8295-3 Shock Small Alum C-O 15 -24 Eye-B/eye-B
+ $12.15 shipping
/qa1-precision-products/uifWYZbeHeanByom1d_2eQ==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 8295-3 Shock Small Alum C-O 15 -24 Eye-B/eye-B V5-3 QA1 Precision Products SHOCK SML ALUM C-O 15 -24 EYE-B/EYE-B V5-3
More

Delta BC30T2 30 in...

$377.99
CPO Outlets Delta BC30T2 30 in. Biesemeyer Commercial T-Square Fence and Rail System
Free Shipping
/delta-bc30t2-30-in/Cgni0Qsy-gGhljJvkCs0xg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
30 in. Biesemeyer Commercial T-Square Fence and Rail System - BC30T2. T-Square Fence. Front & Rear Guide Rails. Front Guide Tube. Mounting Hardware. Ruggedly constructed of 9-ply Finland birch and high-impact laminates, fitted to solid steel tubing and angle iron mounting rail. Ripping capability to both right and left of blade. Attaches to most table saws; built-in steel tape eliminates need for hand-held tape. Easy-gliding fence body handles quick, repetitive cut-off work, precision ripping and squaring cuts. Three-point locking system, hairline pointer assures accuracy within 1/64 of an inch. Fence securely clamps to both front tube to maintain parallelism to the blade. Quick fence removal for locating on either side of the blade for consistent ripping capabilities
More

Empire Professional Framing...

$13.99
Northern Tool Empire Professional Framing Square - 16 Inch x 24 Inch, Aluminum, Hi-Vis Blue, Model 23425
+ $5.99 shipping
/empire-professional/cKrVuLL9Es4lttZV2oUoBg==/info
Northern Tool
IN_STOCK ( In stock )
The Empire professional framing square is built with precision and toughness to handle roof framing, hip roof and roof rafter framing. Anodized aluminum construction will not rust. High-quality square has high visibility, deep stamped and long-lasting graduations. Includes 1/8in., 1/10in., 1/12in. and 1/16in. stamped graduations and conversion tables. It's a complete package to do your job. U.S.A. Case Included No, Dimensions L x W x H in. 24 x 16 x 1/8, Foldable No, Material Aluminum, Measures Multiple units of measurement. High-visibility blue Model Number: 1190. Size: 16. Color: Blue. Age Group: Adult.
More

QA1 Precision Products 6777-8...

$145.49
Autoplicity QA1 Precision Products 6777-8 SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V7
+ $12.15 shipping
/qa1-precision-products/9wjUhEo-CATv4Fv0yY0DkA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 6777-8 SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V7-8 QA1 Precision Products SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V7-8
More

QA1 Precision Products 6276-8...

$129.47
Autoplicity QA1 Precision Products 6276-8 SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V6
+ $12.15 shipping
/qa1-precision-products/XQ6wguRZfh_O2VK8RdT0Uw==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 6276-8 SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V6-8 QA1 Precision Products SHOCK LRG ALUM C-O 13 -20 EYE-B/EYE-B V6-8
More

Starrett Precision Square,...

$595.91
Walmart.com Starrett Precision Square, Tool Steel, 20-12
Free Shipping
/starrett-precision/hD3ktcvuEBUAhy7vS5WXMw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Precision Square, Tool Steel, Hardened And Precision Ground Edges, Lapped Beams and Blades, Outside Dimensions 12 x 7 In, Squareness 0.0002 In, Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and Straightness FeaturesIncludes: -Item: Precision SquareMaterial: Tool SteelNumber of Pieces: -Outside Dimensions (In.): 12 x 7Construction: Hardened And Precision Ground Edges, Lapped Beams and BladesCharacteris tics: Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and StraightnessSquar eness (In.): 0.00020
More

QA1 Precision Products 6593-8...

$140.64
Autoplicity QA1 Precision Products 6593-8 SHOCK LRG ALUM 15 -24 EYE-B/EYE-B V3-8
+ $12.15 shipping
/qa1-precision-products/rvvLSxcyl6HVupE0s8MCtQ==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
QA1 Precision Products 6593-8 SHOCK LRG ALUM 15 -24 EYE-B/EYE-B V3-8 QA1 Precision Products SHOCK LRG ALUM 15 -24 EYE-B/EYE-B V3-8
More

Kreg PRS1045 Precision Router...

$499.00
Max Tool Kreg PRS1045 Precision Router Table System - PRS1045
Free Shipping
/kreg-prs1045-precision/welE27In2wH-suIL_fs0lw==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
With the all-new Kreg Precision Router Table System, you can offer your customers an innovative solution for all of their precision- routing needs. That’s because this router table combines the popular features of its predecessor— the PRS1040 Kreg Precision Router System—with an innovative batch of new features and improved capabilities. The new Kreg Precision Router Table System (Item# PRS1045) features an all-new self-squaring fence system, an updated table, as well as an easy-to-use steel stand that offers even more customizability. At the heart of the router table is Kreg’s NEW Precision Router Table Fence (Item# PRS1015). Customers will quickly appreciate the easy assembly and adjustability this new fence offers. Additionally, the fence features an innovative T-square style design... Less
More

Delta BC50T2 50 in...

$459.00
CPO Outlets Delta BC50T2 50 in. Biesemeyer Commercial T-Square Fence and Rail System
Free Shipping
/delta-bc50t2-50-in/m9OEBfKSBlLQH7VFtNw7Og==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
50 in. Biesemeyer Commercial T-Square Fence and Rail System - BC50T2. T-Square Fence. Front & Rear Guide Rails. Front Guide Tube. Mounting Hardware. Ruggedly constructed of 9-ply Finland birch and high-impact laminates, fitted to solid steel tubing and angle iron mounting rail. Ripping capability to both right and left of blade. Attaches to most table saws; built-in steel tape eliminates need for hand-held tape. Easy-gliding fence body handles quick, repetitive cut-off work, precision ripping and squaring cuts. Three-point locking system, hairline pointer assures accuracy within 1/64 of an inch. Fence securely clamps to both front tube to maintain parallelism to the blade. Quick fence removal for locating on either side of the blade for consistent ripping capabilities
More

PTG 4-Flute Double Square End...

$13.99
MidwayUSA PTG 4-Flute Double Square End Micrograin Carbide Mill Cutter 1/8
+ $4.99 shipping
/ptg-4flute-double-square/RM66FnwuTkFL15rjDonAHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts even in hardened steels Premium tooling from P.T.G. (Pacific Tool and Gauge): Notes: Premium Micrograin carbide resists wear, long lasting Solid Carbide cuts quickly in hardened steels Right hand cut Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

JET Square Wheel Belt Grinder...

$2,199.00
Northern Tool JET Square Wheel Belt Grinder - 2 Inch x 72 Inch, Model J-4103
+ $177.62 shipping
/jet-square-wheel-belt/b2e31RbvIzUUXaVrfyL7-A==/info
Northern Tool
IN_STOCK ( In stock )
The JET J-4103 Square Wheel Belt grinder offers fast, efficient grinding and finishing all in one machine. Serrated contact wheel removes heavy stock, cleans up a weld or snags a casting. The J-4103 grinds and refinishes cylindrical shapes and puts a satin finish on steel, iron or aluminum, and grind difficult to reach areas with the 3in. x 2in. or 1 1/2in. x 2in. diameter contact wheels. Dimensions L x W x H in. 20 x 18 x 20, Includes Belt, Material Type Metal, Motor Phases 1, Application Metal grinding, Wheel Included Yes, Wheel Size in. 8, Belt Size in. x in. 2 x 72, Belt Speed ft./min. 4600. 1 HP, 115/230V motor Performs intricate contouring or internal finishing on uniquely shaped parts Platen setting is the perfect angle for high speed, precision flat and level grinding Model... Less
More

Precision Instruments -...

$234.88
ToolTopia.com Precision Instruments - (PRETC3F175F) TC Torque Comparator # TC3F175F, 1/2
Free Shipping
/precision-instruments/hrV8nje-He7N1wZ5tTQJig==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
TC torque comparator is calibrated on torque testers which are certified using text bars and class F weights traceable to NIST. Meets or exceeds GGG-W-686C and ANSI B107. 14M. Perfect for a facility where a quick check of a wrench is required before usage. Excellent for tool trucks to verify wrench accuracy and avoid unnecessary service. Highly accurate from 20% of full scale to full scale. 1/2 male square drive, 1/2 female square drive adaptor included. Large 175 lb.-ft. scale dial with increments every 5 lb.-ft for easy torque reading. Compact design allows for horizontal or vertical mounting. No power requirements.
More

PTG 4-Flute Square End...

$26.99
MidwayUSA PTG 4-Flute Square End Micrograin Carbide Mill Cutter 3/8
+ $4.99 shipping
/ptg-4flute-square-end/qqYvSBwdWkY68rnIzl5H6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Length of Cut: 1 Shank Diameter: .375 Overall Length: 2.5 Notes: Four flute design from solid carbide for quick, clean cuts P.T.G. (Pacific Tool and Gauge): Notes: Right hand cut. Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Starrett Precision Square,...

$326.34
Walmart.com Starrett Precision Square, Tool Steel, 20-6
Free Shipping
/starrett-precision/eS4ikqgkFRv1Am9Hoir9uA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Precision Square, Tool Steel, Hardened And Precision Ground Edges, Lapped Beams and Blades, Outside Dimensions 6 x 4 5/16 In, Squareness 0.0001 In, Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and Straightness FeaturesIncludes: -Item: Precision SquareMaterial: Tool SteelNumber of Pieces: -Outside Dimensions (In.): 6 x 4 5/16Construction: Hardened And Precision Ground Edges, Lapped Beams and BladesCharacteris tics: Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and StraightnessSquar eness (In.): 0.00010
More

Delta BC50T2 50 in...

$459.00
Tyler Tool Delta BC50T2 50 in. Biesemeyer Commercial T-Square Fence and Rail System
Free Shipping
/delta-bc50t2-50-in/VhtJni3u-SXTpOP8CouR6Q==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
50 in. Biesemeyer Commercial T-Square Fence and Rail System - BC50T2. T-Square Fence. Front & Rear Guide Rails. Front Guide Tube. Mounting Hardware. Ruggedly constructed of 9-ply Finland birch and high-impact laminates, fitted to solid steel tubing and angle iron mounting rail. Ripping capability to both right and left of blade. Attaches to most table saws; built-in steel tape eliminates need for hand-held tape. Easy-gliding fence body handles quick, repetitive cut-off work, precision ripping and squaring cuts. Three-point locking system, hairline pointer assures accuracy within 1/64 of an inch. Fence securely clamps to both front tube to maintain parallelism to the blade. Quick fence removal for locating on either side of the blade for consistent ripping capabilities
More

PTG 4-Flute Square End...

$19.99
MidwayUSA PTG 4-Flute Square End Micrograin Carbide Mill Cutter 5/16
+ $4.99 shipping
/ptg-4flute-square-end/2rXIWnq5Qn1XN8c_5gAmFw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts P.T.G. (Pacific Tool and Gauge): Notes: Right hand cut. Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

PTG 4-Flute Double Square End...

$13.99
MidwayUSA PTG 4-Flute Double Square End Micrograin Carbide Mill Cutter 1/16
+ $4.99 shipping
/ptg-4flute-double-square/F7TSzaVJU_VriGxbgic4BQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts even in hardened steels Premium tooling from P.T.G. (Pacific Tool and Gauge): Notes: Premium Micrograin carbide resists wear, long lasting Solid Carbide cuts quickly in hardened steels Right hand cut Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Precision Instruments -...

$348.25
ToolTopia.com Precision Instruments - (PREC4D600F) 3/4 Dr. Split Beam Torque Wrench wi
Free Shipping
/precision-instruments/adZVfdF5XV5SrZUDIfSNaA==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style clock wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to work in a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load. Drive Size: 3/4Drive Type: Detachable ratchetCapacity: 200-600 lb.ft.Increments: 10 lb.ft.Overall Length: 48- 29/64Effective Length: 44-31/32Width: 2-3/8Head Height (without square): 1-1/4Weight: 11.76 lbs.; (w/plastic case): 14.18 lbs.Finish: Nickel / ChromeMeets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
More

Metaltech Multipurpose Maxi...

$549.99
Northern Tool Metaltech Multipurpose Maxi Square Baker-Style Scaffold Tower Package - 12ft., 820-Lb. Capacity, Model I-TCISC, Yellow
+ $379.85 shipping
/metaltech-multipurpose/BzTGc67b8LQhLVZv1vagRA==/info
Northern Tool
IN_STOCK ( In stock )
This Metaltech multipurpose maxi square Baker-style rolling scaffold features rugged 1 1/2in. square tube steel construction with a yellow poly powder-coat finish, 5in. double locking casters and a spring-loaded locking mechanism. Steel reinforced plywood platform adjusts in 2in. increments, ranging from 27in. to 71in.H. 73in.L x 29in.W x 74in.H overall size. Meets OSHA standards. Platform Material 5/8 in. plywood w/steel reinforced edge, Platform Height in. 27-141 in.H in 2 in. increments, Caster Size in. 5, Caster Type Double locking, Color Yellow, Height in. 144, Dimensions W x D x H in. 73 x 29 x 144, Dimensions W x H in. 29 x 144, Finish Type Thermosetting poly powder-coat, Frame Type Ladder- adjustable, Material Type Steel, Platform Size W x D in. 73 x 29, Capacity lbs. 820,... Less
More

PTG 4-Flute Double Square End...

$23.99
MidwayUSA PTG 4-Flute Double Square End Micrograin Carbide Mill Cutter 1/4
+ $4.99 shipping
/ptg-4flute-double-square/TL0zvAI63Jn5x49HryTWAQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts even in hardened steels Premium tooling from P.T.G. (Pacific Tool and Gauge): Notes: Premium Micrograin carbide resists wear, long lasting Solid Carbide cuts quickly in hardened steels Right hand cut Total Length: 2.45 Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

PRECISION BRAND 5XU50 Tool...

$124.67
Walmart.com PRECISION BRAND 5XU50 Tool Blackening Kit, Coverage 30 to 40 Square Ft
Free Shipping
/precision-brand-5xu50/nn_tVTUVOzwwZ9IfwNvfZQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
2-Piece ABC Blackener(TM) Kit, Coverage 30 to 40 sq. ft., Color Black, Function Imparts Uniform Black Cosmetic Finish to Most Non-Ferrous Metal Parts, Works on Aluminum, Brass, and Copper, Features May Be Applied By Immersion Or Brush-On Technique, Includes 1 qt. of ABC Blackener(TM) and 1 qt. Bottle of ABC Sealant(TM) FeaturesColor: BlackFeatures: May Be Applied By Immersion Or Brush-On TechniqueIncludes : 1 qt. of ABC Blackener(TM) and 1 qt. Bottle of ABC Sealant(TM)Item: 2-Piece ABC Blackener(TM) KitCoverage: 30 to 40 sq. ft.Function: Imparts Uniform Black Cosmetic Finish to Most Non-Ferrous Metal Parts, Works on Aluminum, Brass, and Copper
More

PTG 4-Flute Double Square End...

$17.99
MidwayUSA PTG 4-Flute Double Square End Micrograin Carbide Mill Cutter 3/16
+ $4.99 shipping
/ptg-4flute-double-square/danX7SlZduzZRAWjtoii6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts even in hardened steels Premium tooling from P.T.G. (Pacific Tool and Gauge): Notes: Premium Micrograin carbide resists wear, long lasting Solid Carbide cuts quickly in hardened steels Right hand cut Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

PTG 4-Flute Square End...

$14.99
MidwayUSA PTG 4-Flute Square End Micrograin Carbide Mill Cutter 1/4
+ $4.99 shipping
/ptg-4flute-square-end/fY6LvtoMVlm_-dQuTWnBrQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts P.T.G. (Pacific Tool and Gauge): Notes: Right hand cut. Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Delta BC30T2 30 in...

$377.99
Tyler Tool Delta BC30T2 30 in. Biesemeyer Commercial T-Square Fence and Rail System
Free Shipping
/delta-bc30t2-30-in/MHWpFE-RSJ0UWNjg6lrzAQ==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
30 in. Biesemeyer Commercial T-Square Fence and Rail System - BC30T2. T-Square Fence. Front & Rear Guide Rails. Front Guide Tube. Mounting Hardware. Ruggedly constructed of 9-ply Finland birch and high-impact laminates, fitted to solid steel tubing and angle iron mounting rail. Ripping capability to both right and left of blade. Attaches to most table saws; built-in steel tape eliminates need for hand-held tape. Easy-gliding fence body handles quick, repetitive cut-off work, precision ripping and squaring cuts. Three-point locking system, hairline pointer assures accuracy within 1/64 of an inch. Fence securely clamps to both front tube to maintain parallelism to the blade. Quick fence removal for locating on either side of the blade for consistent ripping capabilities
More

PTG 4-Flute Double Square End...

$34.99
MidwayUSA PTG 4-Flute Double Square End Micrograin Carbide Mill Cutter 3/8
+ $4.99 shipping
/ptg-4flute-double-square/lTXYHihDYo7GK9rV1_brAQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Precision ground carbide end mill. Technical Information Material: Carbide Notes: Four flute design from solid carbide for quick, clean cuts even in hardened steels Premium tooling from P.T.G. (Pacific Tool and Gauge): Notes: Premium Micrograin carbide resists wear, long lasting Solid Carbide cuts quickly in hardened steels Right hand cut Once shipped, cutters cannot be returned. These tools are intended for use by professionals and there are no instructions included. If you are new to gunsmithing, you should work with a qualified gunsmith to ensure a safe and accurate outcome. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Precision Instruments -...

$123.28
ToolTopia.com Precision Instruments - (PREC2FR600H) 3/8 Dr. Split Beam Torque Wrench w
Free Shipping
/precision-instruments/B4-TG5r4C5fyZkQgz_uXkQ==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Note: Image represents product line. This model does not include metal end cap.Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style clock wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to work in a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load.Drive Size: 3/8Drive Type: Flex ratchetCapacity: 100-600 lb.in.Increments: 10 lb.in. Specifications: Overall Length: 17-5/64Effective Length: 14-31/64Width: 1-3/16Head Height (without square): 9/16Weight: 1.48 lbs.Finish: Nickel / ChromeMeets or Exceeds... Less
More

Starrett Precision Square...

$580.00
Walmart.com Starrett Precision Square Set, Stainless Steel, S3020Z
Free Shipping
/starrett-precision-square/OkwYuMEim9eotPqkr5_bDQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Precision Square Set, Stainless Steel, Hardened And Precision Ground Edges, Lapped Beams and Blades, Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and Straightness, Number of Pieces 4 FeaturesItem: Precision Square SetMaterial: Stainless SteelNumber of Pieces: 4Outside Dimensions (In.): 2 31/32 x 1 31/32, 3 31/32 x 2 31/32, 5 29/32 x 3 29/32, 12 1/32 x 6 7/8Construction: Hardened And Precision Ground Edges, Lapped Beams and BladesCharacteris tics: Beams and Blades are Hardened, Ground, and Lapped to Insure Parallelism and StraightnessSquar eness (In.): 0.00020
More

Incra Gsqr7 Guaranteed Square...

$89.95
Walmart.com Incra Gsqr7 Guaranteed Square 7-Inch Precision Square
Free Shipping
/incra-gsqr7-guaranteed/FP5KSI5BhPHJWU39qflhgA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The name is the promise of accuracy. This beautifully machined 7 X 90 degree square is guaranteed accurate to .001 from heel to toe. Made with a hefty 1/4 thick solid aluminum alloy body, each square is machined from a single piece, eliminating the potential alignment errors that can occur when a separate blade is manually assembled to a separate handle.The one piece body won't get bent out of shape if accidentally dropped, and the anodized blade and body won't tarnish like brass. Pretty to look at, but so accurate it will be aconstant work companion. USA
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410