Showing results for "power table feed mill"
Results 1 - 40 of 1500+

Jet JET JTM-4VS Mill w/...

$9,999.00
Max Tool Jet JET JTM-4VS Mill w/ X-Axis Powerfeed 3 stage power down feed 690008 - JET-690008
Free Shipping
/jet-jet-jtm4vs-mill-w/n0sWvNyqqL-j28Yqf0WKFA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Meehanite casting Hardened and ground table certified to be 52C Rockwell hardness Chrome lead screws on X and Y axis Boxed style ways on Y and Z axis Turcite B on X and Y axis JET JTM-4VS Mill w/ X-Axis Powerfeed 3 stage power down feed 690008
More

General Wire Pv-A-Wc Hand...

$501.00
Global Industrial General Wire Pv-A-Wc Hand Held Power Feed W/25'X1/4 & 25'X3/8 Cables
No Shipping Info
/general-wire-pvawc-hand/2ZlikVx63MCW9RqyJ1JXSQ==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Hand Held Power Feed w/25'x1/4 & 25'x3/8 Cables, Cutter Set and Carrying Case When working under sinks or in other awkward places, the Power-VeeTM is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line. It's easy to use. To feed the cable, start the Power-Vee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8 cable at 16 feet per minute. The Power-Vee handles 1/4 through 3/8 cables without any need for adjustment. Squeezing the feed lever brings the rollers into solid contact with the cable, with minimum effort by the operator. Our Dyna-ThrustTM bearing system helps carry the weight of the drum, significantly reducing wear on... Less
More

Jet JET-690008 JTM-4VS Mill...

$10,549.00
Factory Authorized Outlet Jet JET-690008 JTM-4VS Mill w/ X-Axis Powerfeed 3 stage power down feed 690008
Free Shipping
/jet-jet690008-jtm4vs/HhP8IpcNazYlmJShOQW8dg==/info
Factory Authorized Outlet
IN_STOCK ( In stock )
Store not rated
Free Shipping
Meehanite casting Hardened and ground table certified to be 52C Rockwell hardness Chrome lead screws on X and Y axis Boxed style ways on Y and Z axis Turcite B on X and Y axis Jet JTM-4VS Mill w/ X-Axis Powerfeed 3 stage power down feed 690008
More

General Wire Ps-92-A Power...

$2,072.00
Global Industrial General Wire Ps-92-A Power Feed Floor Machine, 100'X3/4 & 100'X1/2 Cables & Cutter Set
No Shipping Info
/general-wire-ps92a/IXad1xwEjJcu42F_CGxYaw==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Power Feed Floor Machine , 100'x3/4 Cable, 100'x1/2 Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2 cable, a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4, 5/8, and 1/2 cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4 or 5/8 cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel mounted on the handle... Less
More

Verticle/horizon tal Mill...

$8.00
eBay Verticle/horizon tal Mill Power Table Feed -- How I Built Mine
Free Shipping
/verticlehorizontal-mill/A9zG20Qb8U901cmIKeWgag==/info
eBay
IN_STOCK ( In stock )
Free Shipping
THIS ITEM IS A PDF FILE THAT COMES ON CD AND TELLS YOU --HOW I BUILT MINE--. I have a small vertical mill and wanted a power table feed but I couldn't find one to fit. I decided to build my own. I used a mig welder wire feed drive and designed my own electronic drive circuit for that. this could easily be driven from a 24v battery charger (from 120v) but I used 24 vdc from battery as I live from solar and battery power. my unit has FOR/REV , speed adjustment , rapid traverse , and table travel
More

Grizzly G3103 Vertical Mill...

$3,480.16
Hardware Tools.com Grizzly G3103 Vertical Mill with Table Power Feed
Free Shipping
/grizzly-g3103-vertical/kwMaGDqG9ED41PqOHIQcBw==/info
Hardware Tools.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
These are beautifully produced accurate machines that are far more than just a step above a mill/drill They feature a tilting head a knee one shot lubrication satin finished dials 9 speeds and so much more Features a power feeder for smoother finishes and easy operation
More

General Wire Ps-92-C Electric...

$1,780.00
Global Industrial General Wire Ps-92-C Electric Floor Model Machine W/Power Feed,100'X3/4 Cable & Cutter Set
No Shipping Info
/general-wire-ps92c/59z8Lln5IFhhQVgsFWMhCw==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100'x3/4 Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2 cable (available separately), a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4, 5/8, and 1/2 cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4 or 5/8 cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel... Less
More

General Wire P-Me-C-S The...

$1,595.00
Global Industrial General Wire P-Me-C-S The Metro™ Cutting Machine W/Power Feed 100'X1/2 Cable & Cutter Set
No Shipping Info
/general-wire-pmecs-the/OIowJe4xbg1S2ZZrbMUJIA==/info
Global Industrial
IN_STOCK ( In stock )
General Wire P-ME-C-S The Metro Cutting Machine w/Power Feed 100'x1/2 Cable & Cutter Set The Metro is a tough root cutting machine in a compact, lightweight package, at a price that's easy on tight budgets. With 100 feet of 9/16 cable it handles roots and other difficult obstructions in 3 to 6 lines - ideal for drain cleaners, plumbers, contractors and building maintenance. This easy to use, one-person operation machine is light enough to take down to the basement or up on the roof. The Metro has many of the features of the bigger capacity root cutting machines, including a variable speed Power Cable Feed that drives and retracts 9/16, 5/8, and 3/4 cable at up to 20 ft. per minute. The heavy-duty powder coated steel drum holds 100 ft. of 9/16 cable for inside lines, 75 ft. of 5/8 cable... Less
More

Power Feed Table X Axis Fits...

$320.50
eBay Power Feed Table X Axis Fits Bridgeport Acer Mills Milling Feeder Free Shipping
Free Shipping
/power-feed-table-x-axis/4PAPSGkAUqJeqeyQZEBEhg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Power Feed X-Axis We value our customers and products like we value our photos in our ad, thank you. Descriptions: Brand New Power feed X axis X traverse Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Variable speed: 0-140 RPM Speed: 0-200 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Increase milling efficiency No more gear charge hassles Fits all Bridgeport style machine 150lbs of torque Weight: 9.85lbs (just machine) Overall dimension: 5''L x 8/38''W x 11-1/4''H Qu
More

General Wire P-Xp-B Electric...

$915.00
Global Industrial General Wire P-Xp-B Electric Floor Model Machine W/ Power Feed, 75'X3/8 Cable & Cutter Set
No Shipping Info
/general-wire-pxpb/xMMXVsbrmkTopm8AO0YDaA==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x3/8 Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8 semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4 to 4 in diameter with just one machine. The drum easily holds 75 feet of 3/8 or 1/2 cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum... Less
More

Power Feed Table Y Axis Fits...

$329.99
eBay Power Feed Table Y Axis Fits Bridgeport Acer Mills Milling Feeder Free Shipping
Free Shipping
/power-feed-table-y-axis/Ks0sC-6ENvGrfz13AB2IhQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Power Feed Y-Axis We value our customers and products like we value our photos in our ad, thank you. Descriptions: Brand New Power feed Y axis Y traverse Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Variable speed: 0-140 RPM Speed: 0-200 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Increase milling efficiency No more gear charge hassles Fits all Bridgeport style machine 150lbs of torque Weight: 9.85lbs (just machine) Overall dimension: 5''L x 8/38''W x 11-1/4''H Qu
More

Grizzly G9901 Vertical Mill...

$6,220.96
Hardware Tools.com Grizzly G9901 Vertical Mill with Power Feed, 9 x 42-Inch
Free Shipping
/grizzly-g9901-vertical/qFd_sxxh1e74hIdBddjxng==/info
Hardware Tools.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Longitudinal Power Feed Motor: 2 HP Single Phase Table size: 9-Inch x 42-Inch; Table travel : 12-1/2-Inch; Table travel : 25-7/8-Inch Motor: 2 HP Single Phase Table size: 9-Inch x 42-Inch
More

X-axis Power Table Feed Mill...

$323.99
eBay X-axis Power Table Feed Mill Milling Fits Bridgetport Acer 150 Lb
Free Shipping
/xaxis-power-table-feed/XU7ZEaxshki6yp5eRDIfbA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Document X-Axis Power Feed FREE SHIPPING Power feed X axis X traverse Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Variable speed: 0-140 RPM Speed: 0-200 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Increase milling efficiency No more gear charge hassles Fits all Bridgeport style machine 150lbs of torque Weight: 9.85lbs (just machine) Overall dimension: 5''L x 8/38''W x 11-1/4''H Quantity: 1 ● CONTINENTAL USA (excludes: HI, AK, PR, GU, and VI ) shipping ONLY
More

Banks Outdoors Feed Bank...

$209.99
Sportsman's Guide Banks Outdoors Feed Bank 275-lb. Gravity Feeder
+ $18.99 shipping
/banks-outdoors-feed-bank/qIeDXHHp01k2HEurmhvxzw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Banks Outdoors Feed Bank 275-lb. Gravity Deer Feeder is hassle free and will never break down in bad weather! Feed deer the easy way! The UV-stabilized polyethylene feeding container makes this Gravity Feeder maintenance free... and with no mechanical parts, it'll never break down in harsh weather. The single post design allows deer to feed easily and without obstructions. It's simple to set up, too. Simply bury any 8-ft. 4 x 4 post 3' into the ground. This leaves the 4 feeding ports at an optimal height of 42. This Banks Outdoors Gravity Feeder is great for managing and improving the size of bucks and does in your area.Healthy bucks:UV-stabilize d polyethylene feeder is durable and weatherproof Gravity-fed means no mechanical parts that will fail in harsh weather conditions4 adjustable... Less
More

Y-axis Power Feed Table Mill...

$330.25
eBay Y-axis Power Feed Table Mill Milling Fits Bridgetport Acer Mills 150 Lb
Free Shipping
/yaxis-power-feed-table/9jwwmfip4lrTSyOExBfiUA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Document Y-Axis Power Feed FREE SHIPPING Power feed Y axis Y traverse Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Variable speed: 0-140 RPM Speed: 0-200 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Increase milling efficiency No more gear charge hassles Fits all Bridgeport style machine 150lbs of torque Weight: 9.85lbs (just machine) Overall dimension: 5''L x 8/38''W x 11-1/4''H Quantity: 1 ● CONTINENTAL USA (excludes: HI, AK, PR, GU, and VI ) shipping ONLY
More

Grizzly G9903 Vertical Mill...

$7,147.96
Hardware Tools.com Grizzly G9903 Vertical Mill with Power Feed, 9 x 49-Inch
Free Shipping
/grizzly-g9903-vertical/y3yYTBe2SSq7fhP5SCA9Lg==/info
Hardware Tools.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Motor: 3 Phase 2 H.P. TEFC Induction; R-8 Spindle; Table size: 9-Inch x 49-Inch; Table travel : 12-1/2-Inch; Table travel : 31-1/8-Inch R-8 Spindle Table size: 9-Inch x 49-Inch
More

DAYTON 2LKR1 Mill/Drill...

$4,508.56
Walmart.com DAYTON 2LKR1 Mill/Drill Machine, 16 in. Swing, 60Hz
Free Shipping
/dayton-2lkr1-milldrill/8tNk_7Zdz8YLkdlMGhQD-A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Mill/Drill Machine, Swing 16 In., Motor HP 1-1/2, 1 Phase, 115/230 Motor, 120 Power Feed Table, 60 Hz, 150 to 3000 RPM, R8 Spindle, Spindle Taper -, Spindle Speed 150 to 3000, Spindle Travel 5 In., Spindle to Table 17 In., Column Dia. 4-1/2 In., Quill Dia. 3 In., Head -, Table Work Surface 9-1/2 x 32 In., (4) 5/8 T-Slots, 1-1/2 In. Drill, 3/4 In. End Mill, 3 In. Face Mill CapacityFeaturesA mps AC : 23Capacity : 1-1/2 Drill, 3/4 End Mill, 3 Face MillFeatures : Fine Feed Handwheel With .001 Graduations With Quill Lock, Cast Iron Construction, Taper Roller Spindle Bearings, Depth Gauge, Precision Ground Work Table, Zero Setting Handwheel Dials With .001 GraduationsInclud es : 2 Chuck, 2 1/2 Face Mill Cutter With Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X... Less
More

Banks Outdoors Feed Bank...

$449.99
Sportsman's Guide Banks Outdoors Feed Bank 600-lb. Gravity Feeder
+ $124.99 shipping
/banks-outdoors-feed-bank/WOcRUVF6FYJ3I1UOQ1oNkw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Banks Outdoors Feed Bank 600-lb. Gravity Deer Feeder keeps deer plump-full all year long! High capacity! The 600-lb. capacity container means less refilling and less chance of an empty feeder when deer come to eat. The single post design allows deer to feed easily and without obstructions. The UV-stabilized polyethylene feeding container makes this Gravity Feeder maintenance free... and with no mechanical parts, it'll never break down in harsh weather. If you want to improve the size and health of deer in your woods, but live on a large farm or your land is too far away, this Banks Outdoors Gravity Feeder is the perfect solution. Fill it up and it's ready to go.Unobstructed feeding:UV-stabili zed polyethylene feeder is durable and weatherproof No mechanical parts that will fail in harsh... Less
More

Grizzly G9905 Vertical Mill...

$8,571.34
Hardware Tools.com Grizzly G9905 Vertical Mill with Power Feed, 10 x 54-Inch
Free Shipping
/grizzly-g9905-vertical/4rJDp76UkpApolsGG322aw==/info
Hardware Tools.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Motor size: 3 HP 3 Phase; Shipping weight approx.: 3582-Pound; Table size: 10-Inch x 54-Inch; Table travel : 15-1/2-Inch; Table travel : 33- Shipping weight approx.: 3582-Pound Table size: 10-Inch x 54-Inch
More

Table Saw Out-feed Slide Base...

$2.16
Sears Parts Direct Table Saw Out-feed Slide Base - 0SZZ
+ $7.99 shipping
/table-saw-outfeed-slide/IfrHZ3Mmykv333HU6dYbsQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved out-feed slide base (part number 0SZZ) is for table saws.Out-feed slide base 0SZZ houses the out-feed support rods under the saw base.Unplug the table saw before starting the repair. Wear work gloves to protect your hands.
More

Jet JTM-2 Mill Three-Stage...

$8,599.00
Max Tool Jet JTM-2 Mill Three-Stage Power Down Feed With ACU-RITE VUE DRO 690283 - JET-690283
Free Shipping
/jet-jtm2-mill/qpe3eegSmrW3nIVqaaFUBw==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled JTM-2 Mill Three-Stage Power Down Feed With ACU-RITE VUE DRO 690283
More

Jet JET JTM-1 Mill...

$8,599.00
Max Tool Jet JET JTM-1 Mill Three-Stage Power Down Feed with ACU-RITE VUE DRO 690280 - JET-690280
Free Shipping
/jet-jet-jtm1-mill/yl4MJtmI3JMdXnhbGEEjxg==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled JET JTM-1 Mill Three-Stage Power Down Feed with ACU-RITE VUE DRO 690280
More

Mill River Walnut End Cap

$1.73
Lumber Liquidators Mill River Walnut End Cap
Free Shipping
/mill-river-walnut-end-cap/UiGrJ0oZFG_4Ya8ZmAe7Kw==/info
Lumber Liquidators
IN_STOCK ( In stock )
Free Shipping
Mill River Walnut End Cap. Mill River Walnut Laminate End Cap What are End Caps used for? End Caps are used to transition from the wood floor to a higher surface such as: Doors- thick tile- and raised hearth. Not sure if this is the right product? Call 1-800-HARDWOOD to speak to one of our flooring experts. We will be glad to help you!
More

Vaughan 505M 24 oz Milled...

$23.29
Toolup.com Vaughan 505M 24 oz Milled Face Framing Hammer
No Shipping Info
/vaughan-505m-24-oz-milled/B1FH7ncXkJp5Xm9ON98DLw==/info
Toolup.com
IN_STOCK ( In stock )
Vaughan 505M Specifications: Hickory Handle Milled Face Head Weight: 24 oz. Length: 17Vaughan 505M Includes: (1) 24 oz Milled Face Framing Hammer Vaughan 505M Features: Available with either smooth or milled face, this framing hammer sets the industry standard for appearance and balance. Top quality white hickory handle is triple wedged. Milled face helps prevent glancing blows and flying nails.
More

Jet JET JTM-1 Mill...

$9,399.00
Max Tool Jet JET JTM-1 Mill Three-Stage Power Down Feed with Newall DP700 DRO 691187 - JET-691187
Free Shipping
/jet-jet-jtm1-mill/zEJhlor9bA-xY83YuS_AyQ==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled JET JTM-1 Mill Three-Stage Power Down Feed with Newall DP700 DRO 691187
More

Ridgid Screw Feed Cutters

$49.99
Overstock.com Ridgid Screw Feed Cutters
+ $2.95 shipping
/ridgid-screw-feed-cutters/J52PZaKkX18ujXcmHP32MQ==/info
Overstock.com
IN_STOCK ( In stock )
Standard wheel: E-1240 Cutting capacity: .125-inch (min), 1-inch (max) Materials: Copper, brass, aluminum, thin-wall conduit Weight: 7/8 lb
More

HHIP 3129-0150 X-Axis Power...

$562.50
Hardware Tools.com HHIP 3129-0150 X-Axis Power Table Feed, 110V~1 Phase
Free Shipping
/hhip-31290150-xaxis/LB37mhId3WCbm1S5W0dirQ==/info
Hardware Tools.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
X-Axis (Longitudinal Feed); for Bridgeport* type mills For Bridgeport* type mills 110V/ 60Hz/ 1 PH power supply Complete with all hardware. Rapid speed switch
More

Safety Handle For X Travel...

$58.83
eBay Safety Handle For X Travel Used W/power Feed For Bridgeport Milling Mill new
+ $6.20 shipping
/safety-handle-for-x/HLlT4bn-WhyxoXUxiNNohw==/info
eBay
IN_STOCK ( In stock )
Safety Crank Handle for X Travel w/5/8(.625) ID used with Power Feed for Bridgeport Mills 100% Made in the USA Brand New Safety Crank Handle Used with Power Feeds Does not spin when using Power Feed Only engages when pushed in to move table by hand Included are the gear/clutch and spring For Bridgeport Series Mills Other parts available for Bridgeport Milling Machines HQT PN: 038-0406 NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a di
More

Table Saw Out-feed Slide Base...

$2.16
Sears Parts Direct Table Saw Out-feed Slide Base - 0SZY
+ $7.99 shipping
/table-saw-outfeed-slide/JjAm4LLzSFmuZa8EwO2yKw==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved out-feed slide base (part number 0SZY) is for table saws.Out-feed slide base 0SZY houses the out-feed support rods under the saw base.Unplug the table saw before starting the repair. Wear work gloves to protect your hands.
More

Handheld Feed Scale With...

$9.99
Chicks Discount Saddlery Handheld Feed Scale With Measuring Tape
+ $7.99 shipping
/handheld-feed-scale-with/fG5n7C_zbV8EYVThrf_5mw==/info
Chicks Discount Saddlery
IN_STOCK ( In stock )
Store not rated
Measure Your Feed And Hay! Handheld Feed Scale With Tape Measure.
More

JET 690017 Mill 2HP 1Ph 230V...

$8,759.00
CPO Outlets JET 690017 Mill 2HP 1Ph 230V with X and Y Table Powerfeed
Free Shipping
/jet-690017-mill-2hp-1ph/6F32TfUjf2Q_RG4PDrD3DA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JTM-2 Mill, 2HP, 1Ph, 230V with X and Y Table Powerfeed - 690017. One Shot Lubrication System. Way Covers. Draw Bar. Tool Box. Meehanite casting. Precision bored and honed milling head. Large diameter quill is chromed. High precision Class 7 spindle bearings. Spindle head is internally cooled. Satin chrome finished dials. Heavy duty splined motor drive. One piece quill pinion and shaft. Three stage power downfeed with automatic stop. Heavy duty spindle brake. Precision hardened and ground ways. Precision ground table. Adjustable gibs throughout. Internal coolant tank built into base for use with coolant system (coolant pump not included). Tolerance test sheet included
More

Jet JET JTM-1 Mill 3-Stage...

$9,999.00
Max Tool Jet JET JTM-1 Mill 3-Stage Power Down feed w/ 3-Axis Newall DP700 DRO (Knee) 691196 - JET-
Free Shipping
/jet-jet-jtm1-mill/PI7V3aoLHlwbDAYFl5cRVA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled JET JTM-1 Mill 3-Stage Power Down feed w/ 3-Axis Newall DP700 DRO (Knee) 691196
More

Bosch MA55 Screw Gun...

$119.99
CPO Bosch Bosch MA55 Screw Gun Auto-Feed Attachment Factory Reconditioned
+ $6.99 shipping
/bosch-ma55-screw-gun/F2EoDCq77kO9WymTy8I3Ww==/info
CPO Bosch
IN_STOCK ( In stock )
Screw Gun Auto-Feed Attachment - MA55. Long PR2 Screwdriving Bit. Comfortable continuous working due to its lightweight and ergonomic design. Enables continuous precision driving at top speed. Long life due to open design that prevents dust deposits in the collet. For use with Bosch SG182, SG450 and SG250 Screw Guns
More

Jet Jtm-1 Stephead Milling...

$9,399.00
eBay Jet Jtm-1 Stephead Milling Machine W/dro & Power Feed 3ph 690281 Free Ship
Free Shipping
/jet-jtm1-stephead/67Ay1Owdq7d7WNhqakY3nA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Jet Model JTM-1, 9 x 42 Table 2HP, 230V, 3PH VERTICAL MILLING MACHINE With Acu-Rite VUE DRO installed and power table feed (Stock 690281)FREE SHIPPING Residential Delivery Liftgate Included!ORDERS? QUESTIONS? CALL US 866-532-2962 Our Step Pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production. STANDARD FEATURES • Meehanite® casting • Precision bored and honed milling • Large diameter quill is chromed • High
More

Ridgid Screw Feed Tubing...

$54.99
Overstock.com Ridgid Screw Feed Tubing Cutters
Free Shipping
/ridgid-screw-feed-tubing/vT0BoCne7iy7rxF4Gjq8Zg==/info
Overstock.com
IN_STOCK ( In stock )
Free Shipping
Standard wheel: F-158 Cutting capacity: 1.875 inches (min), 1.125 inches (max) Materials: Copper, brass, aluminum, thin-wall conduit Weight: 1.25 pounds
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212