Category

Tools and Accessories
Showing results for "power table feed mill"
Results 1 - 40 of 1500+

JET 350083 AL/CE-500D Table...

$849.99
CPO Outlets JET 350083 AL/CE-500D Table Power Feed for JMD-18 Milling/Drilling Machine
Free Shipping
/jet-350083-alce500d/oaGi8XzZgT3-rI9bVl1MfQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
AL/CE-500D Table Power Feed for JMD-18 Milling/Drilling Machine - 350083. Current overload protection with automatic circuit breaker shut off. Simple speed control with the variable speed dial. Easy to use and easy to attach with all hardware included
More

Baileigh Vertical Mill Drill...

$4,075.00
Elite Metal Tools Baileigh Vertical Mill Drill VMD-45G
Free Shipping
/baileigh-vertical-mill/V5tGv4wotndYr3HiHO36mA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Did you ever wish to have a milling table on your drill press to do that little odd job that comes up? The VMD-45G mill/drill from Baileigh Industrial solves that that issue.  The VMD-45G incorporates a 31 x 9 milling style table, that enables the operator to do more things that just the drilling function if they have the right tooling.  The table also incorporates a power feed on the x axis, perfect for those longer cuts that need to be accurate.The VMD-45G vertical mill/drill press has a very wide column to eliminate flexing when milling or drilling at full capacity.  The column also incorporates a power down feed system.  The base and column are made from a rigid casting adding to the strength of this 1-3/4 maximum capacity drilling machine. The gear driven head has 12 speeds that... Less
More

Safety Handle For X Travel...

$58.83
eBay Safety Handle For X Travel Used W/power Feed For Bridgeport Milling Mill new
+ $6.20 shipping
/safety-handle-for-x/HLlT4bn-WhyxoXUxiNNohw==/info
eBay
IN_STOCK ( In stock )
Safety Crank Handle for X Travel w/5/8(.625) ID used with Power Feed for Bridgeport Mills 100% Made in the USA Brand New Safety Crank Handle Used with Power Feeds Does not spin when using Power Feed Only engages when pushed in to move table by hand For Bridgeport Series Mills Other parts available for Bridgeport Milling Machines HQT PN: 038-0406 NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS, Inc. a
More

JET 350020 Milling/Drilling ...

$4,575.67
CPO Outlets JET 350020 Milling/Drilling Machine with Built in. Power Downfeed
Free Shipping
/jet-350020/J0Di7hrA6cYeRN-cA3jNXQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JMD-18 Milling/Drilling Machine w/ Built-In Power Downfeed - 350020. Work Lamp. Adjustable Carbide Face Mill. Drill Press Angle Vise. 1/2 in. Drill Chuck &, Chuck Arbor. Draw Bar. One-piece cast-iron column for added support. Belt cover - quick slide latch allows faster belt adjustment to change spindle speeds. Base - taper allows for easier clean-up. Large hand wheel knobs. UL Listed motor. Extra-large work table. Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth. New positive quick-stop knob and easy-to-read internal depth gauge. Heavy-duty power down feed with manual fine feed. Three power down feeds of .004 in, .007 in. and .01-in
More

Baileigh Vertical Milling...

$14,295.00
Elite Metal Tools Baileigh Vertical Milling Machine VM-942-1
Free Shipping
/baileigh-vertical-milling/cbuKyckD2PeYLpnr3H0TZQ==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Baileigh Industrial has a line of vertical milling machines to meet any shops requirements, whether it is price, size, or power.  The VM-942 vertical milling machine fits into the price category, but that does not mean that it doesn’t have features to back it up and make it a great value.The VM-942 is a fully variable speed milling machine that allows infinite adjustment to the speed from 60 to 4200 rpm.  Being able to fine tune the speed of the quill is important in prolonging tooling life and saving money.  Speaking of the quill or spindle Baileigh Industrial has specified a NST-40 spindle taper for the VM-942.  The larger taper helps eliminate chatter and run out during the cutting process and make better cuts.The VM-942 has a powerful 3 hp motor that runs on 220 volt single phase... Less
More

Sharp Lmv-k 9x42 Mill Package...

$10,499.00
eBay Sharp Lmv-k 9x42 Mill Package W/dro, Power Feed & Dvs Head
No Shipping Info
/sharp-lmvk-9x42-mill/9jhyXHuhDiPLyXxvUPUAtQ==/info
eBay
IN_STOCK ( In stock )
BRAND NEW SHARP MODEL LMV-K Premier Package Milling Machine with 9 x 42 table. Equipped with 3 axis Digital Readout, Power Table Feed Digital Variable Speed Head. ORDERS? QUESTIONS? CALL US 866-532-2962 STANDARD EQUIPMENT:Hard-Chr ome Ways And Gibbs 3- Axis Digital Readout X axis Powerfeed Digital Variable Head wired 220 V ( 440 V requires additional Transformer) Precision Ground And Flaked Table Unique Double Nut Backlash System Single Fan Cooling System Cutler Hammer On/Off Switch Front And R
More

Jet Jtm-2 Mill With Vue Dro &...

Free Shipping
2 stores Jet Jtm-2 Mill With Vue Dro & X-axis Powerfeed Installed
More

Sharp Lmv-50k 9x50 Mill...

$10,799.00
eBay Sharp Lmv-50k 9x50 Mill Package W/dro, Power Feed & Dvs Head
No Shipping Info
/sharp-lmv50k-9x50-mill/kTUlDRWF1SOTSo6dG8ZlOQ==/info
eBay
IN_STOCK ( In stock )
BRAND NEW SHARP MODEL LMV-50K Premier Package Milling Machine with 9 x 50 table. Equipped with 3 axis Digital Readout, Power Table Feed Digital Variable Speed Head. ORDERS? QUESTIONS? CALL US 866-532-2962 STANDARD EQUIPMENT:Hard-Chr ome Ways And Gibbs 3- Axis Digital Readout X axis Powerfeed Digital Variable Head wired 220 V ( 440 V requires additional Transformer) Precision Ground And Flaked Table Unique Double Nut Backlash System Single Fan Cooling System Cutler Hammer On/Off Switch Front And
More

Jet Jtm-1 Stephead Milling...

$10,099.00
eBay Jet Jtm-1 Stephead Milling Machine W/dro & Power Feed 3ph 690281 Free Ship
Free Shipping
/jet-jtm1-stephead/67Ay1Owdq7d7WNhqakY3nA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Jet Model JTM-1, 9 x 42 Table 2HP, 230V, 3PH VERTICAL MILLING MACHINE With Acu-Rite VUE DRO installed and power table feed (Stock 690281)FREE SHIPPING Residential Delivery Liftgate Included!ORDERS? QUESTIONS? CALL US 866-532-2962 Our Step Pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production. STANDARD FEATURES • Meehanite® casting • Precision bored and honed milling • Large diameter quill is chromed • High
More

JET 690082 9 in. x 42 in. 2...

$7,299.00
CPO Outlets JET 690082 9 in. x 42 in. 2 HP 3-Phase Vertical Milling Machine
Free Shipping
/jet-690082-9-in-x-42-in/O2CVUIbMNEhdCYXznOZ6mg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
9 in. x 42 in. 2 HP 3-Phase Vertical Milling Machine - 690082. One-Shot Lubrication System. Way Covers. Draw Bar. Tool Box &, Tools. Meehanite casting. Precision bored and honed milling head. Large diameter quill is chromed. High precision Class 7 spindle bearings. Spindle head is internally cooled. Satin chrome finished dials. Heavy-duty splined motor drive. One-piece quill pinion and shaft. Three-stage power down feed with automatic stop. Heavy-duty spindle brake. Precision hardened and ground ways. Precision ground table. Adjustable gibs throughout. Internal coolant tank built into base for use with coolant system (coolant pump not included). Tolerance test sheet included
More

JET 690089 9 in. x 42 in. 2...

$7,299.00
CPO Outlets JET 690089 9 in. x 42 in. 2 HP 1-Phase R-8 Taper Vertical Milling Machine
Free Shipping
/jet-690089-9-in-x-42-in/Gd8ZJ4gvyW37ZQVhpG9QCg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
9 in. x 42 in. 2 HP 1-Phase R-8 Taper Vertical Milling Machine - 690089. One-Shot Lubrication System. Way Covers. Draw Bar. Tool Box &, Tools. Meehanite casting. Precision bored and honed milling head. Large diameter quill is chromed. High precision Class 7 spindle bearings. Spindle head is internally cooled. Satin chrome finished dials. Heavy-duty splined motor drive. One-piece quill pinion and shaft. Three-stage power down feed with automatic stop. Heavy-duty spindle brake. Precision hardened and ground ways. Precision ground table. Adjustable gibs throughout. Internal coolant tank built into base for use with coolant system (coolant pump not included). Tolerance test sheet included
More

JET 690401 1-Phase Vertical...

$9,999.00
CPO Outlets JET 690401 1-Phase Vertical Milling Machine with ANILAM Wizard 411 DRO &X Axis TPFA
Free Shipping
/jet-690401-1phase/W6WVloJM1cipzB0dJzDqMg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JTM-4VS 1-Phase Vertical Milling Machine w/ ANILAM Wizard 411 DRO and X Axis TPFA - 690401. One-Shot Lubrication System. Way Covers. Draw Bar. Tool Box &, Tools. Meehanite casting. Precision bored and honed milling head. Large diameter quill is chromed. High precision Class 7 spindle bearings. Chrome plated motor shaft with lower bearing support. Spindle head is internally cooled. Satin chrome finished dials. Heavy-duty splined motor drive. One-piece quill pinion and shaft. Three-stage power down feed with automatic stop. Heavy-duty spindle brake. Locks on all movable surfaces. Precision hardened and ground ways and table. Adjustable gibs throughout. Internal coolant tank built into casting base for use with coolant system (coolant pump not included). Tolerance table sheet included
More

Steel Shaft Extension For...

$127.20
eBay Steel Shaft Extension For Electronic Feed To Standard Power Feed Bridgeport
+ $6.20 shipping
/steel-shaft-extension-for/r1f_jl3UHMVKg6y-ZWW3_g==/info
eBay
IN_STOCK ( In stock )
Steel Shaft Extension w/2 Keys for Electronic Power Feed Replacement to Standard Power Feed on X-Axes for Bridgeport Mills Made In The USA! Brand New Shaft Extension w/2 Keys for X-Axes (long table feed) For Bridgeport Mills ID of Shaft Extension: .815 fits over .812 shaft Other parts available for Bridgeport Milling Machines HQT PN: 1103/1179 (2) NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS, Inc
More

JET 690182 9 in. x 49 in. 3...

$7,999.00
CPO Outlets JET 690182 9 in. x 49 in. 3 HP 3-Phase R-8 Taper Variable Speed Vertical Milling Machine
Free Shipping
/jet-690182-9-in-x-49-in/wdc1rFzUPA6WhK_6tI8mNg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
9 in. x 49 in. 3 HP 3-Phase R-8 Taper Variable Speed Vertical Milling Machine - 690182. One-Shot Lubrication System. Way Covers. Draw Bar. Tool Box &, Tools. Meehanite casting. Precision bored and honed milling head. Large diameter quill is chromed. High precision Class 7 spindle bearings. Chrome plated motor shaft with lower bearing support. Spindle head is internally cooled. Satin chrome finished dials. Heavy-duty splined motor drive. One-piece quill pinion and shaft. Three-stage power down feed with automatic stop. Heavy-duty spindle brake. Locks on all movable surfaces. Precision hardened and ground ways and table. Adjustable gibs throughout. Internal coolant tank built into casting base for use with coolant system (coolant pump not included). Tolerance table sheet included
More

SANDVIK COROMANT R210082C814M...

$1,039.46
Zoro SANDVIK COROMANT R210082C814M High Feed/Plunge Mill Cut, R210082C814M
Free Shipping
/sandvik-coromant/ZLZwR0IpiqSSo9BOn3Uo9Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
High Feed/Plunge Mill Cutter, CoroMill 210, Cutting Dia. 2.28 In, Max Cutting Dia. 3.23 In, Mounting Style Coromant Capto, Mounting Size C8, Depth of Cut 0.079 In, Cutting Angle 10 Degrees , Number of Inserts 5, Insert Size 14 mm, Overall Length 3.150 In, Pitch Close, Cutting Directions Right, ANSI Number R210082C814M
More

SANDVIK COROMANT R210066C614M...

$859.95
Zoro SANDVIK COROMANT R210066C614M High Feed/Plunge Mill Cut, R210066C614M
Free Shipping
/sandvik-coromant/x9TZh0BiYklrTqHNAtEjGQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
High Feed/Plunge Mill Cutter, CoroMill 210, Cutting Dia. 1.65 In, Max Cutting Dia. 2.60 In, Mounting Style Coromant Capto, Mounting Size C6, Depth of Cut 0.079 In, Cutting Angle 10 Degrees , Number of Inserts 4, Insert Size 14 mm, Overall Length 2.835 In, Pitch Close, Cutting Directions Right, ANSI Number R210066C614M
More

Table Milling Machine Power...

$324.99
eBay Table Milling Machine Power Feed X-axis Torque 150 Lbs Mill Fits Bridgeport Acer
Free Shipping
/table-milling-machine/VwlOPQePyJ-CdLs5EnTR2A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Power Feed X-Axis Unit overall dimension: 5''L x 8/38''W x 11-1/4''H Type: X-Axis Reversible with 1.5 second time delay Variable speed Rapid traverse speed: 40/Min Feed range: 0-10/Min 115V/60Hz / 1 Phase power supply Torque: 150LBS Quantity: 1 Set .
More

DAYTON 2LKR1 Mill/Drill...

$4,376.59
Walmart.com DAYTON 2LKR1 Mill/Drill Machine, 16 in. Swing, 60Hz
Free Shipping
/dayton-2lkr1-milldrill/8tNk_7Zdz8YLkdlMGhQD-A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Mill/Drill Machine, Swing 16 In., Motor HP 1-1/2, 1 Phase, 115/230 Motor, 120 Power Feed Table, 60 Hz, 150 to 3000 RPM, R8 Spindle, Spindle Taper -, Spindle Speed 150 to 3000, Spindle Travel 5 In., Spindle to Table 17 In., Column Dia. 4-1/2 In., Quill Dia. 3 In., Head -, Table Work Surface 9-1/2 x 32 In., (4) 5/8 T-Slots, 1-1/2 In. Drill, 3/4 In. End Mill, 3 In. Face Mill Capacity Features Amps AC : 23 Capacity : 1-1/2 Drill, 3/4 End Mill, 3 Face Mill Features : Fine Feed Handwheel With .001 Graduations With Quill Lock, Cast Iron Construction, Taper Roller Spindle Bearings, Depth Gauge, Precision Ground Work Table, Zero Setting Handwheel Dials With .001 Graduations Includes : 2 Chuck, 2 1/2 Face Mill Cutter With Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X... Less
More

General Pipe Cleaners Pv-F...

$409.95
Global Industrial General Pipe Cleaners Pv-F Hand Held Power Feed Machine W/ 25'X1/4 Down Head Cable
No Shipping Info
/general-pipe-cleaners/uRxCG2kqmTC4fo3jtWLU4w==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Hand Held Power Feed Machine w/ 25'x1/4 Down Head Cable When working under sinks or in other awkward places, the Power-VeeTM is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line. It's easy to use. To feed the cable, start the Power-Vee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8 cable at 16 feet per minute. The Power-Vee handles 1/4 through 3/8 cables without any need for adjustment. Squeezing the feed lever brings the rollers into solid contact with the cable, with minimum effort by the operator. Our Dyna-ThrustTM bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft... Less
More

General Pipe Cleaners Pv-A-Wc...

$501.00
Global Industrial General Pipe Cleaners Pv-A-Wc Hand Held Power Feed W/25'X1/4 & 25'X3/8 Cables
No Shipping Info
/general-pipe-cleaners/2ZlikVx63MCW9RqyJ1JXSQ==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Hand Held Power Feed w/25'x1/4 & 25'x3/8 Cables, Cutter Set and Carrying Case When working under sinks or in other awkward places, the Power-VeeTM is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line. It's easy to use. To feed the cable, start the Power-Vee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8 cable at 16 feet per minute. The Power-Vee handles 1/4 through 3/8 cables without any need for adjustment. Squeezing the feed lever brings the rollers into solid contact with the cable, with minimum effort by the operator. Our Dyna-ThrustTM bearing system helps carry the weight of the drum, significantly reducing wear on... Less
More

General Pipe Cleaners Ps-92-A...

$2,072.00
Global Industrial General Pipe Cleaners Ps-92-A Power Feed Floor Machine, 100'X3/4 & 100'X1/2 Cables & Cutter Set
No Shipping Info
/general-pipe-cleaners/IXad1xwEjJcu42F_CGxYaw==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Power Feed Floor Machine , 100'x3/4 Cable, 100'x1/2 Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2 cable, a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4, 5/8, and 1/2 cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4 or 5/8 cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel mounted on the handle... Less
More

Table Milling Machine Power...

$335.95
eBay Table Milling Machine Power Feed Y-axis Torque 150 Lbs Mill Fits Bridgeport Acer
Free Shipping
/table-milling-machine/pMYGkb6TJ3tZb2dmDefbYw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Better Values Friendly Service Fast Shipping BRAND NEW Power Feed Y Axis Unit overall dimension: 5''L x 8/38''W x 11-1/4''H Type: Y-Axis Reversible with 1.5 second time delay Variable speed Rapid traverse speed: 40/Min Feed range: 0-10/Min 115V/60Hz / 1 Phase power supply Torque: 150LBS Quantity: 1 Set Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO, AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground
More

Shars Power Feed Table Fits...

$305.00
eBay Shars Power Feed Table Fits Bridgeport Acer Mills Y Axis 150lbs Power Feeder
+ $22.44 shipping
/shars-power-feed-table/adh77mrvHDwjKLe3j1d3VA==/info
eBay
IN_STOCK ( In stock )
SHARS New Power Table Feed Fits Bridgeport Acer Mills Y Axis 150LBS Reg. $579.00 Product Code 202-2213 Product description Power Feed w/mounting brackets Fits Bridgeport Series I, Brute (9x42, 9x49 table), Jet (1048 VS), Select (1VB(5/8 .625 Dia. lead screw )), South Bend (Import)Y traverse (IN-OUT Travel)Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Speed: 0-210 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Shars Model#: APY150 If you are retrofitting a Manual Mill
More

Feed Worm Gear Shaft Sleeve...

$29.80
eBay Feed Worm Gear Shaft Sleeve For Bridgeport Mill
+ $6.20 shipping
/feed-worm-gear-shaft/9ab0DsPt6aAfmsMmhgsqQg==/info
eBay
IN_STOCK ( In stock )
Feed Worm Gear Shaft Sleeve for Bridgeport Mills Made In The USA! Brand New Feed Worm Gear Shaft Sleeve For Bridgeport Series Mills Other parts available for Bridgeport Milling Machines HQT PN: 1305 BRIDGEPORT PN: 2190164 NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS, Inc. and carry their complete line of replacement parts and accessories . Please e-mail us at toolguys02@gmail. com for all of your Br
More

Feed Drive Worm Gear For...

$33.62
eBay Feed Drive Worm Gear For Bridgeport Mill
+ $4.00 shipping
/feed-drive-worm-gear-for/r72o2El8SPPwkBqUpPv1AA==/info
eBay
IN_STOCK ( In stock )
Feed Drive Worm Gear for Bridgeport Mills Made In The USA! Brand New Feed Drive Worm Gear For Bridgeport Series Mills Other parts available for Bridgeport Milling Machines HQT PN: 1309 BRIDGEPORT PN: 2190166 NEED PARTS FOR YOUR BRIDGEPORT?
More

Clausing 19.7 GH Manual Feed...

$48,361.00
Elite Metal Tools Clausing 19.7 GH Manual Feed 3MT 1/1.5 HP Fixed Table 5TS25
Free Shipping
/clausing-197-gh-manual/H78DiO3LBj12Pjo03qjwqA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Features5 head drill pressMounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.Drilling machines can be set-up with rotating heads adding flexibilityMultip le Spindle Models, Size and DimensionsModels SizeABCDE - min.Fixed Table Drills (includes RS Models) 5TS2523.6( 600mm)80.9(2065mm) 32.7(830mm)35.4(90 0mm)9.8(250mm)2.4 (60mm)ModelsE - max.FHLMNFixed Table Drills (includes RS Models) 5TS2520.8( 530mm)11.8(300mm)3 .9(100mm)94.5(2400 mm)102.4(2600mm)19 .7(500mm 
More

Verticle/horizon tal Mill...

$8.00
eBay Verticle/horizon tal Mill Power Table Feed -- How I Built Mine
Free Shipping
/verticlehorizontal-mill/X6K8OejG1MYQfdVIXMmPDA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
THIS ITEM IS A PDF FILE THAT COMES ON CD AND TELLS YOU --HOW I BUILT MINE--. I have a small vertical mill and wanted a power table feed but I couldn't find one to fit. I decided to build my own. I used a mig welder wire feed drive and designed my own electronic drive circuit for that. this could easily be driven from a 24v battery charger (from 120v) but I used 24 vdc from battery as I live from solar and battery power. my unit has FOR/REV , speed adjustment , rapid traverse , and table travel
More

Clausing 19.7 GH Manual Feed...

$39,149.80
Elite Metal Tools Clausing 19.7 GH Manual Feed 3MT 1/1.5 HP Fixed Table 4TS25
Free Shipping
/clausing-197-gh-manual/TXylvbV36tOV7Xg1Olnm9A==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Features4 head drill pressMounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.Drilling machines can be set-up with rotating heads adding flexibilityMultip le Spindle Models, Size and DimensionsModels SizeABCDE - min.Fixed Table Drills (includes RS Models)4TS18, 4TS2523.6(600mm) 8 0.9 (2065mm)32.7(830mm )35.4(900mm)9.8(25 0mm)2.4 (60mm)ModelsE - max.FHLMNFixed Table Drills (includes RS Models)4TS18, 4TS2520.8(530mm)11 .8(300mm)3.9(100mm )75(1900mm)82.6(21 00mm)19.7(500mm) 
More

29 Mill Organizer Bridgeport...

$19.99
eBay 29 Mill Organizer Bridgeport Milling Machine Endmill Calipers Drill Insertable
+ $6.50 shipping
/29-mill-organizer/KYW4A6L1jbAwgc5rArAZHQ==/info
eBay
IN_STOCK ( In stock )
Untitled Document Description Item: Mill Organizer (Model: 29-000) Condition: New in Box Key Features: Designed to fit standard 6 calipers. Multiple compartments used to segregate endmills and prevent damage to cutting edges. Mounts using T-slot on table front (mounting hardware included). Compatible with Bridgeport brand power feed connecting rod. Our Mill Caddy can be mounted below to improve organization even further. Made from durable fiberglass reinforced composite. Mill Organizer The Mil
More

Jet Jtm-4vs-1 9x49 Mill W/dro...

$9,999.00
eBay Jet Jtm-4vs-1 9x49 Mill W/dro & Power Feed 690402 1ph Free Shipping
Free Shipping
/jet-jtm4vs1-9x49-mill/sxnVqipmnkv5ENme_BQoOQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Jet Model JTM-4VS variable speed milling machine. With VUE 2-axis digital readout installed with x axis power feed 2HP 115/230V 1Ph (Stock 690402) FREE SHIPPING Residential Delivery Liftgate Included!ORDERS? QUESTIONS? CALL US 866-532-2962 FEATURES Meehanite® casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Chrome plated motor shaft with lower bearing support Spindle head is internally cooled Satin chrome finished
More

Shars Power Feed Table Fits...

$295.00
eBay Shars Power Feed Table Fits Bridgeport Acer Mills X Axis 150lbs Power Feeder
+ $22.79 shipping
/shars-power-feed-table/6u5ifiqDcZ5dABNhGcaCuQ==/info
eBay
IN_STOCK ( In stock )
SHARS New Power Table Feed Fits Bridgeport Acer Mills X Axis 150LBS Reg. USD$ 525.00 Product Code 202-2212 Product description Power Feed w/mounting brackets Fits Bridgeport Series I, Brute (9x42, 9x49 table), Jet (1048 VS), Select (1VB(5/8 .625 Dia. lead screw )), South Bend (Import)X traverse (Left-Right Travel)Torque: 150in-lb peak / 119in-lb continuous Feed rate: 0.4 to 37.4 IPM Speed: 0-210 RPM Horsepower: 1-3HP For 5/8 shaft with keyway Shars Model#: APX150 If you are retrofitting a Manu
More

SENCO Auto-Feed Screwdriver...

$181.99
CPO Senco SENCO Auto-Feed Screwdriver System 6W0011N
+ $6.99 shipping
/senco-autofeed/UQ1fopJyrpLWqY2jeGwUvA==/info
CPO Senco
IN_STOCK ( In stock )
Store not rated
DS440AC Auto-Feed Screwdriver System - 6W0011N. DS320 Attachment. Extension Pole. Drive Bits. Storage Bag. Extension pole with adjustable handle for driving screws in a standing position. Patent pending corner-fit feed system. Patented sliding rail. Clip-free high strength bits. High-speed 4,000 RPM motor. Precise depth-of-drive adjustment with depth lock. Rugged storage bag fits fully assembled kit. Quick release for easy bit access
More

06 Mill Caddy Head Bridgeport...

$19.99
eBay 06 Mill Caddy Head Bridgeport Machine Kurt Vise Handle Dead Blow Hammer Endmill
+ $5.50 shipping
/06-mill-caddy-head/VAZihlIkPUMVEt5FwWgpyA==/info
eBay
IN_STOCK ( In stock )
Untitled Document Description Item: Mill Caddy (Model: 06-000) Condition: New in Box Key Features: Allows vise handle, dead blow hammer and air line to be hung from the front of the milling machine table for a less cluttered work area. Mounts using T-slot on table front (mounting hardware included). Compatible with Bridgeport brand power feed lever connecting rod. Fits great with Mill Organizer. Made from high strength aluminum. Durable red anodized finish. Vise handle slot width (0.750 in). Ha
More

Clausing 23.6 Step Pulley...

$24,168.00
Elite Metal Tools Clausing 23.6 Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 2SZ32
Free Shipping
/clausing-236-step-pulley/2BpOAwbxfgacEgKRmepVhg==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard FeaturesMounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.Drilling machines can be set-up with rotating heads adding flexibility2 head drill pressMultiple Spindle Models, Size and DimensionsModels SizeABCDE - min.Fixed Table Drills (includes RS Models)2SZ3223.6(6 00mm)89.6(2275mm)3 5.8(910mm)35.4(900 mm)11.8(300mm)9.8( 250mm)ModelsE - max.FHLMNFixed Table Drills (includes RS Models)2SZ3232.6(8 30mm)11.8(300mm)4. 9(125mm)35.4(900mm )43.3(1100mm)19.7( 500mm) 
More

Bridgeport Mill Part, Milling...

$19.99
eBay Bridgeport Mill Part, Milling Machine Feed Reverse Knob Assembly 2193433 M1030
+ $4.54 shipping
/bridgeport-mill-part/7RpXS3PZ37psj-8ihQxxgg==/info
eBay
IN_STOCK ( In stock )
NEW! FEED REVERSE KNOB ASSEMBLY ASSEMBLY INCLUDES:OEM 2193547 REVERSE KNOB STUD - 2193433 REVERSE KNOB - 1180818 SNAP RING MADE OF STEEL AND MANUFACTURED IN THE USA . COMBINE THIS WITH THE M1413 FINE FEED HANDWHEEL AND SAVE ON SHIPPING. THANKS FOR LOOKING! WE LOOK FORWARD TO HELPING YOU WITH ALL YOUR BRIDGEPORT NEEDS CHECK OUT OUR STORE FOR OTHER QUALITY BRIDGEPORT PRODUCTS. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER, INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID.
More

Palmgren 9680162 Table Power...

$703.00
eBay Palmgren 9680162 Table Power Feed For Mill/drill Machine
+ $19.03 shipping
/palmgren-9680162-table/jyEYFtTftUMC5GiIC9IVrA==/info
eBay
IN_STOCK ( In stock )
Palmgren 9680162 Table Power Feed for Mill/Drill Machine Palmgren 9680162 Power Feed Attachment Only Table Power Feed for automating the X axis on Palmgren's Mill/Drill Machine 9680161 Power feeding on the table increases productivity and improves surface finish on the work pieces Features:Travel limit stops Switches and mounting hardware Mill/Drill Machine sold separately Welcome to FastoolNow on eBay!To make your purchase as simple and easy as possible, please refer to the store policies
More

Bridgeport Mill Part, J Head...

$55.99
eBay Bridgeport Mill Part, J Head Milling Machine Longitudinal Feed Nut 2060630 M1069
+ $6.75 shipping
/bridgeport-mill-part-j/5GH9KNLSNkTx8idpn2EhXA==/info
eBay
IN_STOCK ( In stock )
NEW! X AXIS LONGITUDINAL FEED NUT THIS ACCORDION STYLE BRASS NUT WILL FIT SERIES 1 AMERICAN MADE BRIDGEPORT MILLING MACHINES OEM 2060102/2060630 FULL REFUND FOR UNUSED ITEM IF IT IS NOT WHAT IS ADVERTISED. WE CAN'T ACCEPT USED OR COMPRESSED RETURNS. THANKS FOR LOOKING AND DON'T FORGET TO CHECK OUT OTHER QUALITY BRIDGEPORT PRODUCTS IN THIS STORE. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER, INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING
More

Cross Feed Nut(2 Pc)for...

$32.86
eBay Cross Feed Nut(2 Pc)for Short(frt To Back) Table Travel On Bridgeport Mill new
+ $6.20 shipping
/cross-feed-nut2-pcfor/KyxQu0tfGW4CrWoM1FCr2Q==/info
eBay
IN_STOCK ( In stock )
Cross Feed Nut LH Threads (2 piece)for Short (frt to back) Table Travel on Bridgeport Mill MADE IN THE USA! THIS IS A 2 PC BRASS NUT W ith LH THREADS WILL FIT A BRIDGEPORT SERIES 1 MILLING MACHINE USA MADE BRAND NEW LONGITUDINAL FEED NUT IS AVAILABLE (10 69-2) OTHER BRIDGEPORT PARTS AVAILABLE SEE STORE FOR DETAILS HQT PN: 1070-2 BRIDGEPORT PN: 2060631 NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS, I
More

JET 690062 Mill with 10 in. x...

$12,141.10
CPO Outlets JET 690062 Mill with 10 in. x 50 in. Table R-8 Taper EVS3 HP3 Ph 460V Only
Free Shipping
/jet-690062-mill-with-10/8r4763xtHwQl5SIJJvtY9g==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JTM-1050EVS/460, Mill with 10 in. x 50 in. Table, R-8 Taper, EVS, 3 HP, 3 Ph, 460V Only - 690062. Tolerance Test Sheet Included. One Shot Lubrication System. Way Covers. Draw Bar. Tool Box with Tools. Runs quieter and smoother than conventional variable speed head mills. Low maintenance head has less moving parts. No belt slippage allows more power at the spindle. Meehanite casting, hardened and ground table. Chrome lead screws on X and Y axis, and chrome plated motor shaft with bearing support at end. Turcite B on X and Y axis. Large diameter quill is chromed. High precision Class 7 spindle bearings. No fuse breaker power connection. Heavy duty motor drive. One piece quill pinion and shaft. Three stage power downfeed with automatic stop. Heavy duty spindle brake. Double locks on all... Less
More

Clausing 23.6 Step Pulley...

$57,146.00
Elite Metal Tools Clausing 23.6 Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 5SZ32
Free Shipping
/clausing-236-step-pulley/4AdFGulo3oF__KGh9feJ2g==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard FeaturesMounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.Drilling machines can be set-up with rotating heads adding flexibility5 head drill pressCall for Additional AccessoriesMultip le Spindle Models, Size and DimensionsModels SizeABCDE - min.Fixed Table Drills (includes RS Models)5SZ3223.6(6 00mm)89.6(2275mm)3 5.8(910mm)35.4(900 mm)11.8(300mm)9.8 (250mm)ModelsE - max.FHLMNFixed Table Drills (includes RS Models)5SZ3232.6(8 30mm)11.8(300mm)4. 9(125mm)94.5(2400m m)102.4(2600mm)19... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392