Blower, Direct Drive Forward Curve, Wheel Dia 11.81 In, Cfm @ 0.750-in Sp 3000, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 5.8/2.9, Motor Hp 2, Height 29.52 In, Width 23.68 In, Depth 21.20 In, Inlet Dia 9.84 In, Outlet Dia 10.75 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 11.81 In, Cfm @ 0.750-in Sp 3000, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 115/230, 50/60 Hz, 1 Phase, Full Load Amps 22/11, Motor Hp 2, Height 29.52 In, Width 23.68 In, Depth 22.23 In, Inlet Dia 9.84 In, Outlet Dia 10.75 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Hazardous Location, Direct Drive Forward Curve, Wheel Dia 11.81 In, Cfm @ 0.750-in Sp 3000, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 5.8/2.9, Motor Hp 2, Height 29.52 In, Width 23.68 In, Depth 25.86 In, Inlet Dia 9.84 In, Outlet Dia 10.75 In, Housing Material Polypropylene, Includes Hazardous Location Motor For Class I Group D, Class Ii Groups F And G, Division 1 And Division 2

Plastec PLA30ST4P Blower, D/D, 230/460 V, HP 2 G2 Plastec PLA30ST4P Blower, D/D, 230/460 V, HP 2 Blower, Direct Drive Forward Curve, Wheel Dia 11.81 In, CFM @ 0.750-In SP 3000, 54 dBA @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 5.8/2.9, Motor HP 2, Height 29.52 In, Width 23.68 In, Depth 21.20 In, Inlet Dia 9.84 In, Outlet Dia 10.75 In, Housing Material Polypropylene, Includes Motor Mounting Base

Lights Up! 2 Light Brushed Nickel Flush Mounts FL-013BN-PLA

These clear biodegradable soufflé cups (only for foods below 110F) are made from NatureWorks polylactic acid (PLA), which is derived from corn grown in the USA. These compostable PLA soufflé cups are fully biodegradable and compostable and meet the most stringent scientific requirements for biodegradability and compostability, and are ASTM D6400-99 certified for "compostable plastics". Though, they are indistinguishable from normal plastic and as light and strong, they fully degrade into water, carbon dioxide and organic material when composted. There is no reason not to use these compostable cups made from readily renewable resources as compared to the petroleum based plastic cups, which create toxicity and environmental pollution. Please note that composting is required for... Less

Lamp module is new and includes both housing and bulb. Manufactured to the highest ISO9001 standards to fit projector model(s) listed under Specifications tab. Carries a Free manufacturers warranty as specified above, and has undergone strict quality checks for beam performance, ignition, voltage, appearance, connections, and run-time, so you can trust it to work flawlessly in your projector. Extended warranty is available at an additional cost. Item ships the same day if you place your order by 4 pm ET, Monday through Friday. Orders placed after 4 pm ET and before 5 pm ET may ship the same day. Orders placed over the weekend, on a holiday or after 5 pm ET during the week will ship the next business day. Please contact us to confirm when it will ship... Less

Blower, Direct Drive Forward Curve, Wheel Dia 7.87 In, Cfm @ 0.250-in Sp 900, Cfm @ 0.500-in Sp 800, Cfm @ 0.750-in Sp 700, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.4/0.7, Motor Hp 1/3, Height 20.1 In, Width 18.30 In, Depth 17.60 In, Inlet Dia 6.29 In, Outlet Dia 6.29 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 9.84 In, Cfm @ 0.250-in Sp 1000, Cfm @ 0.500-in Sp 900, Cfm @ 0.750-in Sp 800, 48 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.6/0.8, Motor Hp 1/3, Height 24.13 In, Width 24.44 In, Depth 18.76 In, Inlet Dia 7.87 In, Outlet Dia 8.62 In, Housing Material Polypropylene, Includes Motor Mounting Base

moinfar Store SquareTrade AP6.0 949-863-1418 Please Click On The Logo To Visit Our Ebay Store Were You Will Find Many Parts For Your ATV. Up To 9 Horsepower Increase Dynatek Performance Dyna 3000 CDI Ignition Suzuki Intruder 1500 (Fits 1999-2004) Part # D3K3-4 DYNA 3000 DIGITAL PERFORMANCE IGNITION is a plug pla

MPN #KDPSSTL90496. K & D Products Inc Sturdy Step Work Pla. Most Shop Equipment products are available for in-store pickup from Advance Auto Parts.

Blower, Direct Drive Forward Curve, Wheel Dia 14.37 In, 82 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 26.2/13.1, Motor Hp 10, Height 37 In, Width 29.51 In, Depth 31.54 In, Inlet Dia 12.75 In, Outlet Dia 12.75 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 5.9 In, Cfm @ 0.500-in Sp 550, Cfm @ 0.750-in Sp 540, 72 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.6/0.8, Motor Hp 1/2, Height 16.13 In, Width 14.16 In, Depth 17.04 In, Inlet Dia 4.92 In, Outlet Dia 4.92 In, Housing Material Polypropylene, Includes Motor Mounting Base

Rubbermaid RCP6189PLA Commercial full-size cart is a complete system solution for housekeeping in the hospitality industry. Standard equipment includes vinyl bag, bumpers, vacuum holder for up to 12-wide vacuum, and under-deck shelf, plus molded-in tool organizer on back. Full-size cabinet offers exceptional storage space and optional adjustable middle shelf. Compact, so requires less floor space and maneuvers easily in tight spaces. With commercial grade molded construction. Height [Nom]:50 in;Depth [Nom]:60 in;Width [Nom]:22 in;Capacity (text):Capacity: 375 lbs.. ~ Includes one storage cart, one vinyl bag.

Blower, Direct Drive Forward Curve, Wheel Dia 7.87 In, Cfm @ 0.250-in Sp 900, Cfm @ 0.500-in Sp 800, Cfm @ 0.750-in Sp 700, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 115/230, 50/60 Hz, 1 Phase, Full Load Amps 6.6/3.3, Motor Hp 1/3, Height 20.1 In, Width 18.30 In, Depth 18.22 In, Inlet Dia 6.29 In, Outlet Dia 6.29 In, Housing Material Polypropylene, Includes Motor Mounting Base

Lamp module is new and includes both housing and bulb. Manufactured to the highest ISO9001 standards to fit projector model(s) listed under Specifications tab. Carries a Free manufacturers warranty as specified above, and has undergone strict quality checks for beam performance, ignition, voltage, appearance, connections, and run-time, so you can trust it to work flawlessly in your projector. Extended warranty is available at an additional cost. Item ships the same day if you place your order by 4 pm ET, Monday through Friday. Orders placed after 4 pm ET and before 5 pm ET may ship the same day. Orders placed over the weekend, on a holiday or after 5 pm ET during the week will ship the next business day. Please contact us to confirm when it will ship... Less

General Features: Monoblock Class D Disrupt Series Car AmplifierMax Power Rating:2 Ohms: 2200 Watts X 1 Chan.1 Ohm: 3000 Watts X 1 Chan.Rms Power Rating:4 Ohms: 2100 Watts X 1 Chan.Pulse Width Modulated Mosfet Power SupplyWired Remote Bass Level Control IncludedLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +12 Db Bass Boost At 50 Hz)Soft Start Turn-onMono Channel Operation3-way Protection Circuitry (thermal, Overload, And Speaker Short Protection)Heavy Duty Aluminum Alloy Heat-sink For Extreme Heat DissipationNickel -plated Rca Level InputsNickel- plated Screw Terminals4 Gauge Power And Ground Wiring Is Required For Installation. Contact Us For Information Regarding A Discount On Select Amplifier Kits From Our Website When Purchased Together With This Amplifier... Less

These containers are made from 100% annualy renewable resources. PLA stands for Polylactide, a versatile polymer produced by NatureWorks LLC. NatureWorks PLA is compostable under specific conditions. Composting is a method of landfill diversion that allows organic materials to be recycled into a product that can be used as a valuable soil amendment. Check your area to see if commercial composting is available.

Blower, Direct Drive Forward Curve, Wheel Dia 9.84 In, Cfm @ 0.500-in Sp 1550, Cfm @ 0.750-in Sp 1500, 58 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 115/230, 50/60 Hz, 1 Phase, Full Load Amps 10.6/5.3, Motor Hp 3/4, Height 24.13 In, Width 24.44 In, Depth 19.21 In, Inlet Dia 7.87 In, Outlet Dia 8.62 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 5.9 In, Cfm @ 0.000-in Sp 200, Cfm @ 0.125-in Sp 175, Cfm @ 0.200-in Sp 100, 43 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.4/0.7, Motor Hp 1/4, Height 16.13 In, Width 14.16 In, Depth 14.70 In, Inlet Dia 4.92 In, Outlet Dia 4.92 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 14.37 In, Cfm @ 0.750-in Sp 4300, 71 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 13/6.5, Motor Hp 5, Height 37 In, Width 29.51 In, Depth 31.54 In, Inlet Dia 12.75 In, Outlet Dia 12.75 In, Housing Material Polypropylene, Includes Motor Mounting Base

The Body Solid PLA200X Lat Attachment is designed solely for the Body Solid PPR200X Powerline Power Cage. This Body Solid Lat Attachment adds a hi/low pulley system to your existing Body Solid PPR200X Power Cage, giving you even more exercise variation to work with.The Body Solid PLA200X Lat Attachment features 1" diameter weight posts that will accommodate standard and olympic weights. Plus, this power cage lat attachment gives you nylon coated, aircraft quality 2200 lb test cables to ensure long lasting durability.The Body Solid PLA200X Lat Attachment is designed specifically for home use.Includes:(1) Body Solid PLA200X Lat AttachmentHi/Low PulleysOnly works with existing Body Solid PPR200X Power CageEasy Bolt-Together DesignPlate Loaded Carriage System1" Diameter Weight Posts2200 lb... Less

Maitake Grifola Frondosa has been prized in traditional Japanese herbology for hundreds of years Modern science has identified in Maitake Proteoglucan Beta 1 3 Glucan and Beta 1 6 Glucans combined with protein as an active constituent to support the immune system Maitake D Fraction is a standardized form of pure and active Proteoglucan specially developed to be optimal for oral adiministration Grifron Pro Maitake D Fraction 1 oz bottle contains 3 000 mg of PD Fraction which is standardized to contain more than 900 mg 30 of the active proteoglucan

Blower, Direct Drive Forward Curve, Wheel Dia 7.87 In, Cfm @ 0.250-in Sp 500, Cfm @ 0.500-in Sp 300, 43 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 115/230, 50/60 Hz, 1 Phase, Full Load Amps 5.6/2.8, Motor Hp 1/4, Height 20.1 In, Width 18.30 In, Depth 18.22 In, Inlet Dia 6.29 In, Outlet Dia 6.29 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 5.9 In, Cfm @ 0.250-in Sp 250, Cfm @ 0.500-in Sp 150, 54 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.4/0.7, Motor Hp 1/3, Height 16.13 In, Width 14.16 In, Depth 16.42 In, Inlet Dia 4.92 In, Outlet Dia 4.92 In, Housing Material Polypropylene, Includes Motor Mounting Base

Blower, Direct Drive Forward Curve, Wheel Dia 11.81 In, Cfm @ 0.250-in Sp 2100, Cfm @ 0.500-in Sp 1800, Cfm @ 0.750-in Sp 1600, 44 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 3/1.5, Motor Hp 3/4, Height 29.52 In, Width 23.68 In, Depth 21.20 In, Inlet Dia 9.84 In, Outlet Dia 10.75 In, Housing Material Polypropylene, Includes Motor Mounting Base