Hosa cables are built with the hard-working, hard-touring musician or audio professional in mind. Hosa cables are exceedingly popular, due in part to their reputation as being one of the most affordable and high-quality cable lines in the business. Hosa cables have also received praise for their durability and excellent performance. When it comes to audio cable design, Hosa keeps a steady eye on the basics, and you can hear this attention to detail in their sound. To make your next music experience extraordinary, pick up a Hosa cable today!All Hosa cables and adapters, including hard-wired stage snakes and stage boxes, purchased in the USA are warranted by Hosa Technology, Inc. to be free of defects in material and workmanship for the lifetime of the original purchaser.

ZWO1214Kentmoore Abs Pinout Box

 This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.This board has TX and RX LEDs that allow you to actually see serial traffic on the LEDs to verify if the board is working but this board requires a... Less

SquareTrade © AP6.0 For (1) PHILIPS BGY687B 40-600 MHZ WideBand Linear Amplifier hybrid amplifier, NOS. Requires heatsink. Pinout is: In/Gnd/Gnd/+Vcc/G nd/Gnd/Out. THIS IS A TWO WAY AMPLIFIER and be used to amplify any rf signal. Can be used as a receive amp, atv amp or an RF amp for QRP Frequency range: 40 MHz ... 600 MHz Source and Load Impedance: 75 Ohm Power Gain (at 50 MHz): 27 dB DC supply voltage: 24 V (can work from 12-30V)Typical DC current consumption: 340 mA Operating mounting base t

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK... Less

Welcome!Up for sale is a DS1307 based real time clock with battery backup.Features:- Date and Time are accessed and set via simple I2C bus commands - Battery backup means that time will keep for at least 5 years with no external power - Pinout specific to Arduino Duemilanove compatible footprints - General pinout and two sets of headers allow for use with any controller or breadboard including Arduino Mega - Free datasheets and code abound online - Use with all data acquisition, timing, and cal

RENO A E MODEL: L-1200-SSTX 1-CHANNEL VEHICLE LOOP DETECTOR 120 VAC NEW IN BOX INCLUDES ONLY: VEHICLE LOOP DETECTOR, OPERATING INSTRUCTIONS, CONNECTOR PINOUT INFORMATION 30 DAY GUARANTEE! FREE DOMESTIC SHIPPING! BID OR BUY NOW, EMAIL ANY QUESTION OR COMMENT, THANK YOU!

This modular adapter has a DB25 Female connector that plugs into DB25 RS232 serial port and converts it to an RJ45 connection. RJ45 Pinout: Pin1 -- Blue Pin2 -- Orange Pin3 -- Black Pin4 -- Red Pin5 -- Green Pin6 -- Blue Pin7 -- Brown Pin8 -- White Gold plated pin Shielded Type 28AWG wire Molded Gray color housing Thumb screw Lifetime Warranty

AmplifiedParts Tone T-Shirt, Brown w/ White Vacuum Tube Pin Out Diagram Brand New Super Trendy Tone T-Shirt! Brown cotton shirt with Vacuum Tube Pinout Design.Put on the cool every time you wear this techie shirt. geek, nerd, science, music, guitar, tech, techy, techie, geekery About AmplifiedParts: AmplifiedParts was created to serve musicians looking to customize their sound or simply fix their amplifier or guitar. AmplifiedParts is backed by over 25 years of experience serving the electronic

RJ11 Modular Telephone Cord, 4 Conductor 6P4C, 7ft, Silver 4 conductor standard RJ11 modular telephone cord. 6P4C, 7 foot. Straight through pinout - pin 1 to pin 1. Works with all standard telephones. Color is silver satin.

128x64 Graphic LCD Module Gray with White Backlight. Michael Margolis from the Arduino community created a graphics library to use this Graphic LCD with Arduino. http://http://www.arduino. cc/playground/Cod e/GLCDks0108 This Graphic LCD is compliant with Pinout A of the playground article and you need to add aprox. 20 additional NOP operations to make it work (increase the delay) in the delay450ns() function.

70A 12VDC automotive relay has 0.250 (6.35 mm) quick connect terminals with industry standard pinout. Flange mount.

DFRobot Bluetooth Bee TEL0023 The Bluetooth Bee Bluetooth wireless module adapts the Xbee design. It has a compact size, the pinout is compatible with XBEE which is suitable for all kinds of microcontroller systems that have 3.3V power out, and the module can use the AT commands to set baud rate. The Bluetooth Bee modules comes with an on-board antenna which provides better signal quality. It acts like a transparent serial port that works with a variety of Bluetooth adapters and Bluetooth phone

This board converts a USB connection into 5 volt TX and RX that youcan connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chipfrom FTDI (drivers [1] are included with the Arduino software). Pinout of the revised Mini USB Adapter Attach: mini_usb_schemati c.pdf [2] Links:------[1] http://www.ftdichi p. com/Drivers/VCP. htm[2] http://arduino. cc/en/uploads/Mai n/mini_usb_schema tic.pdf

SOLARBOTICS FTDI Basic Breakout (5V) 50512 This is the newest revision of the FTDI Basic. It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings