Paneltronics

Paneltronics Standard DC Meter Panel w/Voltmeter & Ammeter. Dc Meter Panel.8-16 Vdc Expanded Scale Voltmeter And 0-50 Adc Ammeter. Includes Battery Test To Monitor Two Battery Banks. Current: Dc Width: 5 1/2 Height: 8 1/4 Depth: 2 1/4.

Metal Bat Handle Toggle Switches Single or Double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL recognized for use in the USA and CSA certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter black (P/N 016-004) and white (P/N 016-020)

"A" Frame Magnetic Circuit Breakers 25 AmpSingle PoleStandard branch AC or DC circuit breaker for Paneltronics electrical distribution panelsMeets all American Boat and Yacht Council (ABYC) Standards for non ignition protected circuit breakerUL Recognized (UL 1077) for use in the U.S.A., and CSA Certified for use in Canada (ABYC E-11.12.2.8.Trip free (ABYC E-11.12.1.7.2.2. and E-11.12.2.8.1.) Manual reset (ABYC E-11.12.1.7.2.4. and E-11.12.2.8.1.)

The Paneltronics waterproof switch panels are ideal for outdoor locations. The rocker switches on these panels are illuminated and sealed for protection against dust, prolonged salt water spray, and submersion. They're rated at 20A at 12V DC and have an internal red indicator light that illuminates in the on position. These panels also feature front-mounted fuse holders that make fuse replacement easy. The fuse holders are splash-proof and made of high-temperature flame-retardant thermoplastic. Equipped with quick-connect terminals, they are UL recognized at 15A at 250V and CSA certified at 16A at 250V. Standard fuses are UL listed/CSA certified and rated at 10A at 32V DC. The DC positive bus is 12 AWG, marine-grade tinned wire. Each panel is completely pre-wired for easy installation... Less

Single Pole - CE Compliant Thermal Push to Reset Circuit Breakers 15 AmpSingle PoleBranch circuit breaker for Paneltronics electrical distribution panels 12 or 24VDC breaks positive lineMeets all American Boat and Yacht Council (ABYC) Standards for non-ignition protected circuit breakers 1100 CCA MaximumUL Recognized (UL 1077) for use in the U.S.A., CSA Certified for use in Canada, VDE Approved, and CECompliant for use in Europe Trip free (ABYC E-11.12.1.7.2.2. ) Manual reset (ABYC E-11.12.1.7.2.4.)

Incandescent Indicator Lights - 5/16 - 14 VDC - GreenIdeal for use as High Visibility Status or Alarm IndicatorsLarge polycarbonate lensBlack bezelNylon housingPress to fit into 0.312" diameter panel holePigtails are tin plated, 18 gauge, stranded, copper, 6" in length stripped 3/8" (ABYC E-11.12.1.10.) Optional 5/16" tinnerman nut available (P/N 001-132)

PANELTRONICS SWITCH SPDT METAL BAT HANDLE ON/(ON) TOGGLE MP Master List

Paneltronics Circuit Breaker Boot - 5/8" Round Nut - Black Description Paneltronics Circuit Breaker Boot - 5/8" Round Nut - Black Silicone Rubber Boot Black 5/8" Round Nut For bat handle toggle switches, push button switches, and panel seal circuit breakers Provides a watertight seal between switch actuator, bushing, and panel face Mounting nuts are bonded to eliminate delamination Thermal characteristics insure reliable performance over a wide temperature range Inhibits the rotation of switche

Rocker Switch (Waterproof Contura) Single or double pole, and maintaining or momentary configurations are available. Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (Hard Surface with Bumps) Red incandescent 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC moisture resistant Per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/N 004-176) 1/4" male tab terminals are standard without barries (ABYC E-11-14.5.4 Exception) Hole plug Black (P/N 001-295)

Silicone Rubber BootBlack5/8" Round NutFor bat handle toggle switches, push button switches, and panel seal circuit breakers Provides a watertight seal between switch actuator, bushing, and panel face Mounting nuts are bonded to eliminate delamination Thermal characteristics insure reliable performance over a wide temperature range Inhibits the rotation of switches or circuit breakers subjected to low frequency vibration Resists discoloring and cracking

Incandescent Indicator Lights - 5/16 - 14 VDC - GreenIdeal for use as High Visibility Status or Alarm IndicatorsLarge polycarbonate lensBlack bezelNylon housingPress to fit into 0.312" diameter panel holePigtails are tin plated, 18 gauge, stranded, copper, 6" in length stripped 3/8" (ABYC E-11.12.1.10.) Optional 5/16" tinnerman nut available (P/N 001-132) MP Master List

Metal Bat Handle Toggle Switches Single or Double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL recognized for use in the USA and CSA certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter black (P/N 016-004) and white (P/N 016-020)

Metal bat handle toggle switches single or double pole, and maintaining or momentary configurations are available rated at 10a 250vac, 15a 125vac, and 15a 30vdc (abyc e-11.14.1.1) ac units are ul recognized for use in the usa and csa certified for use in canada optional silicone rubber boots provide a watertight panel seal 1/4 male tab terminals are standard hole plugs 1/2 diameter black (p/n 016-004) and white (p/n 016-020)

Silicone Rubber BootBlack5/8" Round NutFor bat handle toggle switches, push button switches, and panel seal circuit breakers Provides a watertight seal between switch actuator, bushing, and panel face Mounting nuts are bonded to eliminate delamination Thermal characteristics insure reliable performance over a wide temperature range Inhibits the rotation of switches or circuit breakers subjected to low frequency vibration Resists discoloring and cracking

Single Pole - CE Compliant Thermal Push to Reset Circuit Breakers 15 AmpSingle PoleBranch circuit breaker for Paneltronics electrical distribution panels 12 or 24VDC breaks positive lineMeets all American Boat and Yacht Council (ABYC) Standards for non-ignition protected circuit breakers 1100 CCA MaximumUL Recognized (UL 1077) for use in the U.S.A., CSA Certified for use in Canada, VDE Approved, and CECompliant for use in Europe Trip free (ABYC E-11.12.1.7.2.2. ) Manual reset (ABYC E-11.12.1.7.2.4.)

Silicone Rubber BootBlack5/8" Round NutFor bat handle toggle switches, push button switches, and panel seal circuit breakers Provides a watertight seal between switch actuator, bushing, and panel face Mounting nuts are bonded to eliminate delamination Thermal characteristics insure reliable performance over a wide temperature range Inhibits the rotation of switches or circuit breakers subjected to low frequency vibration Resists discoloring and cracking MP Master List