Results 1 - 40 of 1500+

Leatherwood Hi-Lux Micro-Max...

$35.00
MidwayUSA Leatherwood Hi-Lux Micro-Max AR Riser Mount Matte
+ $4.99 shipping
/leatherwood-hilux/px3XscqrGR1hrR4aLH20Dg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Micro-Max B-Dot sight is compatible with most of the popular micro red-dot sight mounts available in today’s market. The Micro-Max AR Riser Mount is not included in the standard package; the B-Dot sight only comes with a low profile mount. This AR Riser Mount is a separately purchased mount that raises the Micro-Max Dot 1.6 inches from the rail. You can loosen the four Torx head screws located at the bottom of the sight to change to the high or low mount. Do not over tighten the 4 screws to avoid stripping of the threads
More

GG&G Picatinny-Style Scope...

$43.99
MidwayUSA GG&G Picatinny-Style Scope Base Ruger Mini-14 Ranch Only Matte
+ $4.99 shipping
/ggg-picatinnystyle/6eTz9uoDAdcXrdzLqQe-QA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The GG&G Mini-14 Picatinny-Style Scope Base is a MIL-STD-1913 dovetail rail version that also offers a low profile mounting platform for conventional red dot optics or powered scope and ring combinations. The rail is 5.7 inches long to provide ample mounting space. It is precision machined from rugged 6061-T6 aluminum and Type III hard anodized matte black per mil-spec.
More

Nightforce 1-Piece Ultralite...

$208.04
MidwayUSA Nightforce 1-Piece Ultralite MagMount Picatinny-Style with Integral 34mm Rings Matte Extra-High- Blemished
Free Shipping
/nightforce-1piece/UIBM-eD5G8WSKU8i_lPg-Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Nightforce Ultralite MagMount is a 1-piece picatinny-style mount that provides advanced stability with the addition of a third jaw and cross-bolt at the mid-section of the mount. The MagMount gun mount adds mounting stability to stand up to the hard hitting recoil of modern rifles while maintaining the lightweight design. Technical Information Style: Picatinny Ring Height: 0.771 (measured from base of ring to bottom of scope tube) Base Type: 1-Piece Material: Aluminum Finish: Matte Notes: Mounting hardware included Fits standard 1913 rails CHOOSING RINGS: Ring height is determined by measuring the outside objective (bell) diameter on your scope.
More

Scopecoat Scope Cover...

$12.99
MidwayUSA Scopecoat Scope Cover Trijicon RMR Black
+ $4.99 shipping
/scopecoat-scope-cover/VpIpAkxf1GXq5xWrh3j8xw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America. Will not work on scopes with tall target style turrets. Technical Information Material: 2mm Neoprene Features: Laminated with nylon Neoprene has a 5% moisture absorbency to wick moisture away from scope May be washed in warm water and turned inside out to dry
More

Weigand 1-Piece Weaver-Style...

$39.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base S&W Revolver Matte
+ $4.99 shipping
/weigand-1piece/qHHREYql8MM9tWSwSElwBw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Smith & Wesson K, L and N-Frame Revolvers Notes: Mounting Hardware Included Rear Sight needs to be removed before base can be installed.
More

Burris 1 Xtreme Tactical...

$58.99
MidwayUSA Burris 1 Xtreme Tactical Weaver-Style Rings Matte Medium
Free Shipping
/burris-1-xtreme-tactical/g2-daXBKY3Ln-bJJKW6kHw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
One look and you know Burris Xtreme Tactical Rings are all about point-of-aim security and durability. The super strong yet surprisingly lightweight, six-screw aluminum rings anchor scopes in place on any Picatinny rail or Weaver-style base to deliver unfailing return-to-zero. A choice of four ring heights accommodates the installation of any sight from red-dots to large objective target scopes. The 1 height is perfect for all scopes on AR15/M16 flattop receivers, providing proper cheek weld. Designed and built for the rigors of tactical shooting and massive recoil, Burris Xtreme Tactical Rings are not out of place on varmint rifles or big game rifles that may be expose to the abuses of hard hunting and magnum recoils. Technical Information: Material: Aluminum Ring Height: (from the... Less
More

Weigand Competition Frame...

$99.99
MidwayUSA Weigand Competition Frame Mounted Scope Base with Skeletonized Cuts 1911 Matte
+ $4.99 shipping
/weigand-competition-frame/h4f2cvswwldswH988uiVLw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Rugged and foolproof, this base attaches to the frame and places the scope forward over the top of the slide for improved balance and faster sight alignment. This skeletonized base features side vents to reduce weight and keep your gun cool during long shooting sessions. Clearance cut for Colt Enhanced Slides. Installation requires drilling and tapping of frame. Includes installation instructions and TORX mounting screws. Accepts all Weaver-Style rings and accessories. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Colt 1911 Style Handguns Notes: Mounting Hardware Included Handgun needs to have the frame drilled and tapped Slide Stop will need to be modified as well Skeletonized cuts reduce overall weight of the mount.
More

Talley 1 Fixed Rings Satin...

$69.99
MidwayUSA Talley 1 Fixed Rings Satin High
+ $4.99 shipping
/talley-1-fixed-rings/xED7iVzTU7lJlarf9youXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined with the same exacting quality control as the Quick Detachable, this ring is built for the shooter who prefers the sleek profile of a non-detachable vertically split ring. Using larger screws and no moving parts, this system will stand up to the most punishing magnum. Fits Talley Style dovetail bases. Stainless Steel. Technical InformationMateri al: SteelHeight Low: 0.300Medium: 0.400High: 0.500Extra-High: 0.700 Note: Mounting hardware included.Ring Height Selection (per Talley)Low for scopes up to 44mm objective with standard barrel contourMedium for scopes up to 50mm objective with standard barrel contourHigh for scopes with a 56mm objective with standard barrel contourExtra- High for large objective scopes with heavy contour barrels and single shot rifles
More

Scopecoat Scope Cover 10-1/2...

$16.99
MidwayUSA Scopecoat Scope Cover 10-1/2 x 30mm Black
+ $4.99 shipping
/scopecoat-scope-cover/Byjig8mDoOe1V_W1ew_2YA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America. Will not work on scopes with tall target style turrets. Technical InformationMateri al: 2mm Neoprene Features Recommended fit is either relaxed same length or slightly stretched Neoprene has a 5% moisture absorbency which wicks moisture away from the scope Laminated with nylon May be washed in warm water then turned in side out to dry
More

DNZ Products Game Reaper...

$69.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 30mm Integral Rings Browning BAR Matte High
+ $4.99 shipping
/dnz-products-game-reaper/CfaT5aKQQCy85_JpKQ5FPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Base features a lightweight, aluminum body with integral scope rings. This creates a solid mount that won't shift or loosen up, maintaining exact target alignment shot after shot. The traditional ring/base joint is eliminated, reducing the possibility of the scope shifting under the stress of recoil.Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Burris AR-P.E.P.R. Proper Eye...

$67.14
Walmart.com Burris AR-P.E.P.R. Proper Eye Position Ready Scope Mount
Free Shipping
/burris-arpepr-proper/OeXyvuXys7B9fJ6cavHzsw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Burris AR-P.E.P.R. or Proper Eye Position Ready scope mount is uniquely designed to reliably attach your scope. The Burris scope mount will provide up to 2 of forward scope positioning for optimum eye relief, and full field-of-view for combat riflescopes. The Burris mount comes complete with smooth and Picatinny ring tops that will accommodate additional accessories. The Burris AR-P.E.P.R. Proper Eye Position Ready Scope Mount also makes a wonderful gift for the sportsmen/woman in your life.
More

Leupold 1 QRW Quick-Release...

$51.99
MidwayUSA Leupold 1 QRW Quick-Release Weaver-Style Rings Matte Low
Free Shipping
/leupold-1-qrw/FkixI2W89fMDhXFo4XrrLA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws. Technical Information Ring Height: (measured from base of ring to bottom of scope tube) Low: .230 Medium: .380 High: .480
More

B-Square 1-Piece Weaver-Style...

$27.99
MidwayUSA B-Square 1-Piece Weaver-Style Scope Base Ruger Mark I, Mark II Gloss
+ $4.99 shipping
/bsquare-1piece/_tHVrFkVJAHoospVx53ovQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square handgun bases lock to the firearm using the ventilated rib or existing predrilled holes in the firearm and require no gunsmithing. Rib mounts are full length for maximum eye relief adjustment. Require Weaver-Style rings (not included). Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark 1 and 2 Notes: Clamps to top of the receiver. No gunsmithing required.. Mounting hardware included. Blue Loctite™(product # 613078) or similar thread locking compound is recommended for use with the screws on this base.
More

Burris 1 Signature Zee...

$44.99
MidwayUSA Burris 1 Signature Zee Weaver-Style Rings Matte Medium
+ $4.99 shipping
/burris-1-signature-zee/dXfltgOmk-qJ-XZoQlzI5Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The revolutionary Signature design produces consistent accuracy, tremendous gripping power and stress-free mounting. These steel rings include a pivoting synthetic insert that increases the scope-to-ring mounting surface while protecting the scope finish. Additional Pos-Align Offset Inserts can be purchased (sold separately) to correct any misalignment of receiver holes or rings or even to provide additional windage and elevation adjustment. Technical InformationMateri al: SteelHeight: (from top of base to bottom of scope tube) Medium=.277 High= .42Style: WeaverRing Diameter: 1Notes: Signature rings have synthetic pivoting inserts which increase scope to ring surface area, create consistent accuracy, give more gripping power and enable scratch free and stress free mounting. Mounting... Less
More

Ironsighter 1-Piece...

$13.99
MidwayUSA Ironsighter 1-Piece Weaver-Style Scope Base Savage 110 Through 116 Flat Rear Long Action Matte
+ $4.99 shipping
/ironsighter-1piece/-7BgB6xe3qp6mZGKzFYIaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Ruger 10/22 Matte High
+ $4.99 shipping
/dnz-products-game-reaper/0-ZZqlFTAPrUN-nogAI4Bg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Volquartsen 1-Piece...

$29.99
MidwayUSA Volquartsen 1-Piece Weaver-Style Base Ruger Mark II, Mark III Black
+ $4.99 shipping
/volquartsen-1piece/5KF1VDqcipk8TSynFAA-Rg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Weaver-style base fits factory drilled and tapped Mark II and III pistols. It is constructed of super-rigid aluminum alloy with a silver finish. Technical Information Style: WeaverBase Type: 1- Piece Material: AluminumFinish: Silver Notes:Weight: 1.8 ozLength: 4.6Rear sight removal is required for installation
More

Leupold 30mm PRW (Permanent...

$51.99
MidwayUSA Leupold 30mm PRW (Permanent Weaver-Style) Rings Matte Medium
Free Shipping
/leupold-30mm-prw/7-xCv269sJpzZ6LCngIIaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Use the PRW rings when a cross-slot format is desired or necessary but detachability isn't. Leupold PRW solid steel rings secure directly to the base with two screws for rock solid dependability. Technical Information Material: SteelRing Height: 1 Tube (measured from base of ring to bottom of scope tube)Low: .230Medium: .350High: .480Ring Height: 30mm Tube (measured from base of ring to bottom of scope tube)Medium: . 350High: .480
More

Talley Lightweight 2-Piece 20...

$69.99
MidwayUSA Talley Lightweight 2-Piece 20 MOA Scope Mounts with Integral 30mm Rings Remington 700 Short Action Matte High
+ $4.99 shipping
/talley-lightweight/TNoCxye-1A2Vtl_xTI4z2A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMidwayUSA Exclusive 20 MOA Ring MountsMade from ultra-strong 7000 series aluminumLightweig ht-Only 2.7 oz. per pairRing and base all in oneIncludes attachment screws and hardware MidwayUSA and Talley Manufacturing have teamed up to offer these exclusive 30mm 20 MOA Ring Mounts for the Remington 700! The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Notes: Ring mounts are action length specific. Due to the 20 MOA front downward cant rings can only be mounted in... Less
More

SunGuard killFlash ARD (Anti-...

$19.99
MidwayUSA SunGuard killFlash ARD (Anti- Reflection Device) #6
+ $4.99 shipping
/sunguard-killflash-ard/UBSZIsydCxopW2Xtks5hYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
SunGuard uses the same anti-glint and anti-glare technology that is used by the U.S. Army, Marine Corps and Special Forces to camouflage their optics and cut the glare that interferes with clear sighting. ARDs fit easily into a standard scope cap, block sun glare from getting inside your scope and hide scope reflection that can spook trophy game. SunGuard ARDs are designed to mount to a scope by fitting inside a Butler Creek Flip-Open or Quake Bushwacker scope caps. Technical InformationMateri al: High Impact, Low Glare Polymer Notes: Eliminates Reflection of Light from the Lens Honeycomb Cells Reduce Glare as well as a 7 Sunshade Must be Used in Conjunction with Butler Creek Flip Up and Blizzard Scope Covers or Quake Bushwacker Scope Covers SunGuard ARD Butler Creek Flip-Open Butler... Less
More

Single Coin Wood Presentation...

$14.99
APMEX Single Coin Wood Presentation Box - Fits Up to 40mm
+ $9.95 shipping
/single-coin-wood/GLU5Cch1JXD0cXKZeov4LA==/info
APMEX
IN_STOCK ( In stock )
Store not rated
This wooden presentation box holds one encapsulated coin in an Air-Tite brand capsule. Air-Tite capsule sizes that fit this display box include Direct-Fit capsules 27 mm through 40 mm and Gasket Capsules 26 mm through 32 mm.
More

Weaver 1 Top-Mount...

$29.99
MidwayUSA Weaver 1 Top-Mount Weaver-Style Dual Extended Rings Matte High
+ $4.99 shipping
/weaver-1-topmount/YOJpGm0OD58X4uWv7zkBmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver Top-Mount Rings offer wide top steel caps that hold zero under the most jarring recoil. Loosen the thumb nuts and you can go back to iron sights in seconds. Later you can put the rings back on the base, tighten the thumb nuts and the scope will be very close to zero. Technical InformationMateri al: Aluminum with Steel Top Strap & Steel Hardware.Style: WeaverRing Height: (Measured from base of ring to bottom of scope tube.) Weaver Top Mount Ring Height Saddle Height (inches) Fits Objective Lens Size 1 Low 0.089 Thru 38mm 1 Medium 0.169 Thru 40mm 1 High 0.332 Thru 44mm 1 Extra High 0.560 Thru 50mm 30mm Low 0.288 Thru 33mm 30mm High 0.500 Thru 44mm Notes: Mounting hardware included.
More

Warne 1-Piece Gen 2 Extended...

$94.99
MidwayUSA Warne 1-Piece Gen 2 Extended SKEL MSR Scope Mount Picatinny-Style with 30mm Rings Mil-Spec OD Green
+ $4.99 shipping
/warne-1piece-gen-2/YuT5xqPVcODr-Vm32qasNA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesLightweig ht, skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability.#8 Torx style fasteners with steel threaded inserts to prevent stripping. Additional 1 Inch cantilever forward design to provide additional eye relief.Places your optic at the Ideal Height for MSR and similar platforms.Dual 1/2 tactical nut attachment, 65 in/lb. of torque is recommended. Based on Warne's innovative R.A.M.P. Mount platform, this Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and Warne has been able to reduce the weight by over 30%,... Less
More

1911 Slide Mounted Scope Base...

$29.99
Brownells 1911 Slide Mounted Scope Base - Scope Mount/Wo
+ $7.95 shipping
/1911-slide-mounted-scope/2QdYM2Z-Dk9_Vu9yCUddZA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight top mount replaces the Bomar Tuner sight rib and accepts Weaver-style rings to give Bullseye-style guns the advantage of faster sighting, easy-to-shoot optics. Available without (WO) the cut-out for the tuner. Fits round top 1911's with front and rear sights removed. There is NOT a slot cut for the front sight in the mount. Mfg: Clark Custom SPECS: Extruded aluminum, black-anodized finish. 7-1/8 (18cm) long, .874 (21.5mm) wide. 1.7 oz (48g) wt. Includes installation screws and wrench. Fits 5, Govt. length slides only. Accepts Weaver-style rings.
More

100xS Achromatic Objective...

$98.95
SCHOOLSin 100xS Achromatic Objective Lens for Comprehensive Scope 2 Microscopes
No Shipping Info
/100xs-achromatic/G8rFBV-nE9VK-hQWPWFYWw==/info
SCHOOLSin
IN_STOCK ( In stock )
Store not rated
This interchangeable 100xS Achromatic Objective Lens is designed as an upgrade or replacement to your Ken-A-Vision Comprehensive Scope 2 Microscope. Easy installation.
More

Warne Picatinny Side Mount...

$40.72
Groupon Warne Picatinny Side Mount Adapter - 45 Degree Black
Free Shipping
/warne-picatinny-side/L88xkkEUHbVBJbWwkwgWug==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Warne Team Warne 45 degree Side Mount Accessory Base Adapter A645TW is a great addition to the weapon of any shooting enthusiast. This Warne Side Mount is designed to be used with a Flat Top AR-15 or Tactical Rifle. The Warne 45 degrees Side Accessory Mount requires no additional gunsmithing or modifications of any kind. The Warne 45 Degree Team Warne Picatinny Side Mount Adapter provides a 45 degree accessory platform that attaches to a Picatinny rail and is simple to install with no modification required to your firearm.
More

Celestron Eyepiece and Filter...

$159.95
Crutchfield Celestron Eyepiece and Filter Kit 1.25
Free Shipping
/celestron-eyepiece-and/3tmVZ7ivgrKKyntKaGqK2Q==/info
Crutchfield
IN_STOCK ( In stock )
Free Shipping
14-piece accessory kit for telescope with 1.25 barrel,each eyepiece features a four-element design with a 52� apparent field of view,colored filters can be used to bring out certain details on a planet's surface or its cloud structure
More

Warne 1-Piece Gen 2 Extended...

$114.99
MidwayUSA Warne 1-Piece Gen 2 Extended SKEL MSR Scope Mount Picatinny-Style 20 MOA Elevated with 34mm Rings Tactical Gray
+ $4.99 shipping
/warne-1piece-gen-2/bn9a8iyMHGDfGN7jbciYvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesLightweig ht, skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability.#8 Torx style fasteners with steel threaded inserts to prevent stripping. Additional 1 Inch cantilever forward design to provide additional eye relief.Places your optic at the Ideal Height for MSR and similar platforms.Dual 1/2 tactical nut attachment, 65 in/lb. of torque is recommended. Based on Warne's innovative R.A.M.P. Mount platform, this Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and Warne has been able to reduce the weight by over 30%,... Less
More

Warne Maxima 2-Piece Steel...

$23.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Remington 7 Matte
+ $4.99 shipping
/warne-maxima-2piece/hSaApoov7X9zcqqqog1BGg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

EGW 1-Piece Picatinny-Style...

$35.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Savage 10 Through 16 Flat Rear Short Action Matte
+ $4.99 shipping
/egw-1piece/lPmgfbo7r0PJueynufc3sA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Fits: Savage 10 through 16 Flat Rear Short Action Notes: Mounting Hardware Included
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Browning BAR Matte Low
+ $4.99 shipping
/dnz-products-game-reaper/oVGTCLDQweyVgsQpupSJQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Nightforce Standard Duty...

$57.00
MidwayUSA Nightforce Standard Duty 1-Piece Picatinny-Style Scope Base Browning A-Bolt Long Action Matte
Free Shipping
/nightforce-standard-duty/q_-psAS1g4T9qpMJjxozXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized. Mounting hardware included Technical InformationMateri al: AluminumStyle: 1913 Picatinny rail Notes:The 20 MOA base can be used to gain more usable elevation in your scope which can be a benefit for long range shooting. It is recommended that your scope has a minimum of 50 MOA max internal adjustment if it is intended to be zeroed at 100 yards.
More

Warne 1 Maxima Permanent-...

$31.99
MidwayUSA Warne 1 Maxima Permanent- Attachable Weaver-Style Rings Matte Low
+ $4.99 shipping
/warne-1-maxima/0HYSZ-us1iqZY2bXBE78KA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Warne Maxima Rings are designed to combine the best value, looks and strength in the industry. A stainless steel recoil key holds up to the heaviest recoil, far exceeding the needs of any hunter or target shooter. CHOOSING RINGS: Ring height is determined by measuring the outside objective (bell) diameter on your scope. Technical InformationMateri al: Steel Ring Height: Extra High: .650; High: .525; Medium: .375; Low: .250 (measured from base of ring to bottom of scope tube)
More

Burris AR-P.E.P.R. Proper Eye...

$69.99
Walmart.com Burris AR-P.E.P.R. Proper Eye Position Ready Scope Mount
Free Shipping
/burris-arpepr-proper/Vo5lFFIViNieA1f4veHidg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Burris AR-P.E.P.R. or Proper Eye Position Ready scope mount is uniquely designed to reliably attach your scope. The Burris scope mount will provide up to 2 of forward scope positioning for optimum eye relief, and full field-of-view for combat riflescopes. The Burris mount comes complete with smooth and Picatinny ring tops that will accommodate additional accessories. The Burris AR-P.E.P.R. Proper Eye Position Ready Scope Mount also makes a wonderful gift for the sportsmen/woman in your life.
More

Warne Torque Wrench for Scope...

$18.99
MidwayUSA Warne Torque Wrench for Scope Mount Torx T-15 25 Inch Pounds
+ $4.99 shipping
/warne-torque-wrench-for/0SXTtu4qbAXMfK7SQvshww==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This torque wrench features a comfortable grip design that offers enhanced control during scope ring installation. It includes a T-15 bit and is set to 25 inch pounds (non- adjustable). Designed for use with Warne rings.
More

Leupold 30mm Standard Rings...

$34.99
MidwayUSA Leupold 30mm Standard Rings Matte Super-High
Free Shipping
/leupold-30mm-standard/0nOaW1SlCclJSXmaVZ6mqw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Designed to withstand even the heaviest recoiling rifles, Leupold Standard Rings are constructed of machined steel. Stronger than aluminum, steel rings are perfect for locking your scope solidly into place. The front ring is dovetail style while the rear is windage adjustable. Leupold Standard Rings are ideal for use with Leupold Standard Bases. Technical Information Material: SteelRing Height: 1 Tube (measured from base of ring to bottom of scope tube)Super-Low: .050Low: .150Medium: .270High: .400Super-High: .500Ring Height: 30mm Tube (measured from base of ring to bottom of scope tube)Low: .055.Medium: .175High: .310Super-High: .410
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Browning X-Bolt Short Action Matte Low
+ $4.99 shipping
/dnz-products-game-reaper/1PIfd4zTbm1LdBXmAErt9g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope. Made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Burris FastFire Base...

$47.99
MidwayUSA Burris FastFire Base Springfield XD Matte
Free Shipping
/burris-fastfire-base/3v0cTCnl1By5kpb88X-yzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Burris Fastfire Base is designed to allow for the use of a Burris Fastfire Sight on guns with the the appropriate rear sight cut. Mounts in place of the rear sight and is for use with the Burris Fastfire ONLY. Note: Ruger Mark I, II, III (119655) does not work with 22/45. Specifications: Material: Aluminum Color: Matte Black
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Medium
+ $4.99 shipping
/talley-lightweight/49KbNBiBFuwXY4C22mSO6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Burris Ruger to Weaver Scope...

$32.99
MidwayUSA Burris Ruger to Weaver Scope Base Adapter for Laser Rangefinding Scope Ruger 77 Matte
Free Shipping
/burris-ruger-to-weaver/4u2ULWv37FXR7Xox_SQS5A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
This scope base adapter from Burris is just what you need to mount a Burris Laser Rangefinding Scope to your Ruger 77. The base fits securely in the dovetails on your Ruger receiver to provide the proper mounting surface for the unique Burris scope.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335