network cable 50

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

Build your home or office network with ease using this 50-ft. gray network enhanced Category 5 patch cable.

The Shielded Twisted Pair(STP) gray 50 foot snagless Cat6a cable is ideal for situations with higher environmental noise than normal. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair... Less

Singlemode ( 9/125) | SC to SC | 50 Meter (164.04 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are single mode. Inside these cables you will find three basic layers. Starting from the inside, you have the core which is surrounded by the cladding. Both are protected with the jacket on the outside. Single mode cables have a thinner core size. The core size is simply the thickness of the optical fiber inside the cladding. The cladding is material that surrounds that core which basically serves as... Less

SC equip to MTRJ Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore. COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short... Less

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated... Less

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

Supports data transfer rates up to 1000Mbps Bandwidth frequency up to 250MHz

SC equip to LC Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore. COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short... Less

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated... Less

Category 6 Shielded Twisted Pair (STP) Cable are perfect where critical Gigabit Ethernet connections must be made. The foil shielding covers each pair and a second foil shield wraps all the pairs. The copper wire is bare copper. We do not use Copper Clad Aluminum (CCA). Deploy these shielded CAT6 cables in your datacenter, server room or wherever the possibility for electrical interference may present trouble.

LC equip to LC Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore. COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short... Less

Ultra network cables are made of the highest quality materials to provide you with the most reliable high-speed connection available.

Multimode OM2 (50/125) | LC to LC | 16 Meter (52.49 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode. Inside these cables you will find three basic layers. Starting from the inside, you have the core which is surrounded by the cladding. Both are protected with the jacket on the outside. Multi-mode cables have a thicker core size. The core size is simply the thickness of the optical fiber inside the cladding. The cladding is material that surrounds that core which basically serves as... Less

Multimode OM3 Laser Optimized ( 50/125) | SC to SC | 50 Meter (164.04 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | LC to SC | 30 Meter (98.42 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | LC to SC | 50 Meter (164.04 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | SC to SC | 30 Meter (98.42 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | LC to LC | 50 Meter (164.04 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | LC to LC | 100 Meter (328.10 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less

Multimode OM3 Laser Optimized ( 50/125) | LC to SC | 9 Meter (29.53 ft) Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's... Less