Category

Building Supplies
Showing results for "nema23 stepper motor"
Results 1 - 40 of 1500+

NEMA 23 Stepper Motor Single...

$101.27
Sears Marketplace NEMA 23 Stepper Motor Single Shaft 56mm 4 leads 2HS57-56
No Shipping Info
/nema-23-stepper-motor/1wTJxxLUfjxKKqc0sdaL5w==/info
Sears Marketplace
IN_STOCK ( In stock )
NEMA 23 Stepper Motor Single Shaft 56mm 4 leads 2HS57-56
More

NEMA 23 Stepper Motor Single...

$101.37
Sears Marketplace NEMA 23 Stepper Motor Single Shaft 56mm 4 leads 2HS57-56
No Shipping Info
/nema-23-stepper-motor/bJLNRmjJkH-nN-f4i5D_rg==/info
Sears Marketplace
IN_STOCK ( In stock )
NEMA 23 Stepper Motor Single Shaft 56mm 4 leads 2HS57-56
More

Nema 17 Hybrid Stepper Motor...

$17.67
MakerGeeks.com Nema 17 Hybrid Stepper Motor For 3d Printers
Free Shipping
/nema-17-hybrid-stepper/83MI4lJfHTeqodVS_BBBpw==/info
MakerGeeks.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
The NEMA 17 Stepper Motor is perfect for any 3D Printer project; they are easy to work with and provide a low vibration, low heat work horse! We use these on all our RepRap 3D Printer projects! Our MakerGeeks.com steppers have been designed to use with the Prusa Mendel printer build and other RepRap printer builds. You'll need Five NEMA 17 motors for a Prusa Mendel: one for X axis, one for Y axis, two for Z axis, and one for the extruder. Can be use as 4 wire bi-polar Or 6 wire Unipolar Power Supply 12-36VDC NEMA 17 Form Factor Step Angle (degrees) : 1.8 Holding Torque: 21N/cm 6-Lead Wires, Wire Length 2-3 width 42mm x 42mm total length of 37 mm 5.00/4.6mm diameter shafts shafts length 16.4mm Weight 7.6 oz. Type of Laminated Stator (2 Phase Hybrid (Better Performance at high speed))... Less
More

Stepper Motor - 267 oz.in...

$45.95
Rakuten.com Shopping Stepper Motor - 267 oz.in Dual Shaft NEMA23 (200 steps/rev)
Free Shipping
/stepper-motor-267-ozin/stBILBgeRJcAGLErg4G4aQ==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Description: This is our most powerful stepper motor and it has dual shafts. It has 4 leads and is classified as a hybrid stepper motor. We also have the same motor with a single shaft. Features: Step Angle (degrees): 1.8 2 Phase Rated Voltage: 3.08V Rated Current: 2.8A Holding Torque: 1.9 N.m 6.35mm / Diameter Drive Shaft Winding Resistance: 1.1 Winding Inductance: 3.6 mH Detent Torque: 600 g.cm Rotor Inertia: 440 g.cm
More

CNC Nema23 Stepper Motor...

$118.89
Sears Marketplace CNC Nema23 Stepper Motor 270oz-in 76mm 3A 6-Lead 480g.cm2 0.68kg.cm F Engravers
No Shipping Info
/cnc-nema23-stepper-motor/kin_prCBTYFWTILWvq872w==/info
Sears Marketplace
IN_STOCK ( In stock )
CNC Nema23 Stepper Motor 270oz-in 76mm 3A 6-Lead 480g.cm2 0.68kg.cm F Engravers
More

Nema 23 Stepper Motor Mount...

$19.95
eBay Nema 23 Stepper Motor Mount W/belt & Pulley For Our A-axis/4th Axis Spindle F/s
Free Shipping
/nema-23-stepper-motor/DE945eZ7GJ0grvwpxn67hg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEMA 23 Stepper Motor Mount w/belt pulley for our A-Axis/4th Axis Spindle - Ratio = 2/1 ~See Photos Feedback~ Features Motor Bracket Machined From 6061-T6511 Aluminum with use with our spindles. Belt Pulley Included as shown in photo. Mounts a Nema 23 Stepper Motor to our spindle. Pully Ratio is 18/36 or 2/1. MXL .080 Pitch timing belt for non-slip precision power transmission. Not for use in wet locations. (can be shielded) Fully tested. Finish = Alodine. Machining Methodologies - CNC / Hand /
More

CNC 86 110 Stepper Motor...

$183.06
Sears Marketplace CNC 86 110 Stepper Motor Driver for Nema23/Nema34/Ne ma42 7.2A/AC18-80V/DC2 4-120V
No Shipping Info
/cnc-86-110-stepper-motor/D0BKjFRzRRZb38PZQjbiLg==/info
Sears Marketplace
IN_STOCK ( In stock )
CNC 86 110 Stepper Motor Driver for Nema23/Nema34/Nem a42 7.2A/AC18-80V/DC24 -120V
More

Nema 23 4 Wire 1.8 Degree CNC...

$29.78
Rakuten.com Shopping Nema 23 4 Wire 1.8 Degree CNC Stepping Stepper Motor 41mm 2A 78oz.in
Free Shipping
/nema-23-4-wire-18-degree/eNk18sfy7zY-xOCsQ_UKkg==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper MotorModel No. 57HS4120A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current2AMotor Resistant1.2 OhmMotor Inductance2.5 mHHolding Torque0.55 N.m/ 78 oz.inDetent Torque2.5 N.cm/ 3.6 oz.inRotor Inertia150g. cmShaft Diameter6.35mm/ 0.24 Shaft Length20mm/0.78 Motor Length41 mm/1.6 Cable Length22cm / 8.7 Mouting Hole Dia5mm/0.2 MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight447gPac kage Content1 x Stepper Motor (Non-OEM)
More

Autek NEMA23 Stepper Motor...

$95.45
Sears Marketplace Autek NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller(CNC-04 )
No Shipping Info
/autek-nema23-stepper/WcGO8DETATyPZsUm7DreRQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Autek NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller(CNC-04)
More

3 Pcs Nema23 Stepper Motor...

$119.00
eBay 3 Pcs Nema23 Stepper Motor 282 Oz-in
+ $14.95 shipping
/3-pcs-nema23-stepper/9iG8c3BJXb9w8yiThJFifA==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3 PCS Brand New NEMA23 8 wires Stepper Motor 282 OZ-IN (3 Stepper Motors)This 282oz/in NEMA23 stepper motor is well suited to medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: 282 oz In. Hybrid Motor 1.8° /200 Steps Per Rev.3 Amps Current Per Phase ( Bipolar Parallel)8-wire Bi-polar or unipolar, NEMA 23 Frame Rated Current 3A, Rated Voltage 3.6V 200 st
More

Nextrox NEMA 23 257oz-in 1Nm...

$111.60
Sears Marketplace Nextrox NEMA 23 257oz-in 1Nm Stepper Motor 3A 76mm for CNC controller kit
No Shipping Info
/nextrox-nema-23-257ozin/pQmv26eeCk3hrsD8D0cbkQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Nextrox NEMA 23 257oz-in 1Nm Stepper Motor 3A 76mm for CNC controller kit
More

Nema 23 4 Wire 1.8 Degree CNC...

$51.76
Rakuten.com Shopping Nema 23 4 Wire 1.8 Degree CNC Stepping Stepper Motor 100mm 4.2A 354oz.in
Free Shipping
/nema-23-4-wire-18-degree/AO3puvi3q5l69wA2ZSs_cQ==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper MotorModel No. 57HS10042A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current4.2AMotor Resistant0. 8OhmMotor Inductance3mHHold ing Torque2.5 N.m/ 354 oz.inDetent Torque10 N.cm/ 14.2 oz.inRotor Inertia680g. cmShaft Diameter8mm/ 0.3 Shaft Length20mm/0.78 Motor Length100 mm/3.9 Cable Length22cm / 8.7 Mouting Hole Dia5mm/0.2 MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight1455gPa ckage Content1 x Stepper Motor (Non-OEM)
More

Gowe Close Loop System...

$1,606.09
Sears Marketplace Gowe Close Loop System Stepper Motor Driver 57 Nema23 5a 2.8nm Motor for Cnc Engraving Machine
No Shipping Info
/gowe-close-loop-system/pgJZrPmLHBIdtlmcjY95EQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Gowe Close Loop System Stepper Motor Driver 57 Nema23 5a 2.8nm Motor for Cnc Engraving Machine
More

1 Pcs Nema 23 Dual Shaft...

$46.00
eBay 1 Pcs Nema 23 Dual Shaft Stepper Motor 570 Oz-in
+ $8.95 shipping
/1-pcs-nema-23-dual-shaft/acAchXml-xZm2kYGJCPcfQ==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz NEMA23 570 oz/in 3.5A 1/4” Dual Shaft Stepper Motor (KL23H2100-35-4BM - See more at: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema23- 570ozin-5a-14%e2%8 0%9d-dual-shaft-st epper-motor-kl23h2 100-35-4bm#sthash. 4NygijcM.dpuf NEMA23 570 oz/in 3.5A 1/4” Dual Shaft Stepper Motor (KL23H2100-35-4BM) NEMA 23 Frame, KL23H2100-35-4BM 570 oz In. Hybrid Stepper Motor 1.8° / 200 Steps Per Rev. 3.5 Amps Current, 4-wire, Bi-polar, 1/4 dual shaft
More

NEMA 23 2 Phase Mill Robot...

$75.88
Rakuten.com Shopping NEMA 23 2 Phase Mill Robot CNC Stepper Motor 76mm 3A 255oz.in w MB450A Driver
Free Shipping
/nema-23-2-phase-mill/3JRL2mS4VBvtSRP3wHntCw==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper Motor w DriverModel No. 57HS7630A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current3AMotor Resistant1OhmMoto r Inductance3. 5mHHolding Torque1.8 N.m/ 255 oz.inDetent Torque6 N.cm/ 8.5 oz.inRotor Inertia440g. cmShaft Diameter6.35mm/ 0.24 Shaft Length20mm/0.78 Motor Length76 mm/3 Cable Length22cm / 8.7 Mouting Hole Dia5mm/0.2 Driver Model No.MB450ASupply VoltageDC 18-50VTypical Supply VoltageMicrostep Resolution400, 800, 1000, 1600, 2000, 3200, 4000, 50006400, 8000, 10000, 12800, 20000, 25000, 25600Size11.8 x 8.6 x 3.4cm/4.6 x 3.3 x 1.3 (L*W*H) MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight1310gPa ckage Content1 x Stepper Motor w Driver (Non-OEM)
More

Nema 17 Stepper Gaskets (4...

$1.95
MakerGeeks.com Nema 17 Stepper Gaskets (4 Pack)
Free Shipping
/nema-17-stepper-gaskets/dbvU3RnVQk5nCGbF0VLyVg==/info
MakerGeeks.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Laser Cut NEMA 17 Stepper Gaskets... these little foam gaskets will fit any NEMA17 stepper motor and help with vibration dampening and will in turn help your printer and electronics produce more accurate prints and help to keep your DIY 3D Printer running smoother and longer. Each pack comes with [4] Gaskets! Enjoy!! I got this file from http://www. thingiverse. com/thing:4681 and we have them laser cut here at the MakerGeeks.com Shop
More

1 Pcs Nema 23 Dual Shaft...

$49.95
eBay 1 Pcs Nema 23 Dual Shaft Stepper Motor 425 Oz-in
+ $9.95 shipping
/1-pcs-nema-23-dual-shaft/nkmIHu72ROPaz5xp7ukRSA==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz One Brand New NEMA23 425oz/in 2.8A Stepper Motor ¼” Dual shaft (KL23H286-20-8B)Th ese are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: 425 oz In. Hybrid Motor 200 Steps Per Rev.2.8 Amps Current Per Phase ( Bipolar Parallel)8-wire Bi-polar or unipolar, NEMA 23 Frame 0.25 shaft diameter with a ground flat More Details: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-bipolar -stepper-mot
More

Nema23 4 Lead CNC Router...

$66.91
Rakuten.com Shopping Nema23 4 Lead CNC Router Robot Stepper Motor 41mm 2A 78oz.in w MB450A Driver
Free Shipping
/nema23-4-lead-cnc-router/LYY3A0KcAGcm5b4mXS82aw==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper Motor w DriverModel No. 57HS4120A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current2AMotor Resistant1.2 OhmMotor Inductance2. 5mHHolding Torque1.8 N.m/ 255 oz.inDetent Torque2.5 N.cm/ 8.5 oz.inRotor Inertia150g. cmShaft Diameter6.35mm/ 0.24 Shaft Length20mm/0.78 Motor Length41 mm/1.6 Cable Length22cm / 8.7 Mouting Hole Dia5mm/0.2 Driver Model No.MB450ASupply VoltageDC 18-50VTypical Supply VoltageDC 24 -50VMicrostep Resolution400, 800, 1000, 1600, 2000, 3200, 4000, 50006400, 8000, 10000, 12800, 20000, 25000, 25600Size11.8 x 8.6 x 3.4cm/4.6 x 3.3 x 1.3 (L*W*H) MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight740gPac kage Content1 x Stepper Motor w Driver (Non-OEM)
More

New CNC Nema23 4 Axis TB6560...

$364.94
Sears Marketplace New CNC Nema23 4 Axis TB6560 USB Interface Breakout Board Stepper Motor Driver Power Supply 57BYGH56-401A Stepper Motor(1.2N
No Shipping Info
/new-cnc-nema23-4-axis/6Ctp9gTJb7vl3168SKSRsQ==/info
Sears Marketplace
IN_STOCK ( In stock )
A. CNC USB Interface Breakout Board:br1: The maximum matching 5-axis stepper motor driverbr2: The two-stage signal processing, signal transmission smooth, powerful anti-jammingbr3:5 input interface to define the emergency stop, limit, points in the knife, etc.br4: relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etcbr5: five-axis job LED display, visual display products, working conditionbr6. Input Power: 5V DC power supply / computer USB to take powerbr7. Work axis stepper:Received the highest 5-axis independent drivingbr8. Drive:Pulse direction enable signalbrbrB. Power supplybr250W 24V 10A switching power supplybrbrC. Stepper Motorbr57BYGH56- 401A Stepper Motor(1.2N.m 2.8AbrWiring: Black: A brGreen: A-brRed: BbrBlue: B-brShaft Axial... Less
More

3 Pcs Nema 23 Dual Shaft...

$129.95
eBay 3 Pcs Nema 23 Dual Shaft Stepper Motor 382 Oz-in
+ $11.95 shipping
/3-pcs-nema-23-dual-shaft/l27BGbDQNQY9Ghr3iMMUyg==/info
eBay
IN_STOCK ( In stock )
3pcs Brand New NEMA23 4 wires, Dual Shaft Stepper Motor (3 Stepper Motors) This 382oz/in NEMA23 stepper motor is well suited for medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit
More

Nema23 CNC Router Hybrid...

$52.79
Rakuten.com Shopping Nema23 CNC Router Hybrid Stepping Stepper Motor 112mm 4.2A 397oz.in
Free Shipping
/nema23-cnc-router-hybrid/rn9w1JJZBytLvB4tPy2pSA==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper MotorModel No. 57HS11242A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current4.2AMotor Resistant0. 9OhmMotor Inductance3. 8mHHolding Torque2.8 N.m/ 397 oz.inDetent Torque12 N.cm/ 17 oz.inRotor Inertia800g. cmShaft Diameter8mm/ 0.3 Shaft Length20mm/0.78 Motor Length112 mm/4.4 Cable Length60cm /23.6 Mouting Hole Dia5mm/0.2 MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight1675gPa ckage Content1 x Stepper Motor (Non-OEM)
More

Three Pcs Nema23 Stepper...

$119.00
eBay Three Pcs Nema23 Stepper Motor 282 Oz-in Single Shaft
+ $13.95 shipping
/three-pcs-nema23-stepper/sTKu5jjb66TF_ipb1-pccQ==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3 PCS Brand New NEMA23 8 wires Stepper Motor 282 oz-in (3 Stepper Motors)These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: Rated Current 3A, Rated Voltage 3.6V 0.25 Single shaft diameter with a ground flat 200 steps per revolution More Details: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-14-sing le-shaft-with-flat -282-oz-in-2 http://www. automationtechnol ogiesinc.com/produ cts-p
More

Sunwin 4 axis CNC TB6560...

$396.18
Sears Marketplace Sunwin 4 axis CNC TB6560 Stepper Motor Driver complete Kit NEMA23 Stepper Motor *4
No Shipping Info
/sunwin-4-axis-cnc-tb6560/30_ASux4L56I2oZ1LOQIng==/info
Sears Marketplace
IN_STOCK ( In stock )
Toshiba Tb6560Ahq Chip - High Power, Maximum 3.5A Drive Current Chipset !br1-1/16 Microstep Setting - Higher Accuracy And Smoother Operation Than Standard 1, 1/2 Step!Adjustable 1.5A-3A Drive Current Settings For Each Axis - 25%,50%,75%,100% Of Full Current Can Be Set For Different Stepper Motorsoverload, Over-Current And Over-Temperature Safety - brFull Protection For Your Computer And Peripheral Equipment !On Board Current Switching - Power Output Can Be Set According To Specific User Requirement !brFull Closed-Type Optical Isolation To Protect The User'S Computer And Equipmentrelay Spindle Interface - Outputs Max. 36V 7.5A For Spindle Motors Or Coolant Pump (Only One Device Can Be Powered By This Output!)br4 Channel Inputs Interface- Can Be Used For Xyz Limit And Emergency Stop... Less
More

Nema23 4 Lead CNC Router...

$38.47
Rakuten.com Shopping Nema23 4 Lead CNC Router Robot Stepping Stepper Motor 76mm 3A 255oz.in
Free Shipping
/nema23-4-lead-cnc-router/48p9nLg-3mBpbbEGX4dg1w==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper MotorModel No. 57HS7630A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current3AMotor Resistant1OhmMoto r Inductance3. 5mHHolding Torque1.8 N.m/ 255 oz.inDetent Torque6 N.cm/ 8.5 oz.inRotor Inertia440g. cmShaft Diameter6.35mm/ 0.24 Shaft Length20mm/0.78 Motor Length76 mm/3 Cable Length22cm / 8.7 Mouting Hole Dia5mm/0.2 MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight1050gPa ckage Content1 x Stepper Motor (Non-OEM)
More

3 Pcs Nema23 Stepper Motor...

$109.00
eBay 3 Pcs Nema23 Stepper Motor 282 Oz-in Single Shaft
+ $11.95 shipping
/3-pcs-nema23-stepper/_rr2J_hB5Nj9q-IvUrBWMQ==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3 PCS Brand New NEMA23 8 wires Stepper Motor 282 oz-in (3 Stepper Motors)These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: Rated Current 3A, Rated Voltage 3.6V 0.25 Single shaft diameter with a ground flat 200 steps per revolution More Details: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-14-sing le-shaft-with-flat -282-oz-in-2 http://www. automationtechnol ogiesinc.com/produ cts-p
More

NEMA 23 2 Phase Robot Lathe...

$90.61
Rakuten.com Shopping NEMA 23 2 Phase Robot Lathe CNC Stepper Motor 112mm 4.2A 397oz.in w Driver
Free Shipping
/nema-23-2-phase-robot/Psl-DpOwbYloqxSlZFmIIw==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper Motor w DriverModel No. 57HS11242A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current4.2AMotor Resistant0. 9OhmMotor Inductance3. 8mHHolding Torque2.8 N.m/ 397 oz.inDetent Torque12 N.cm/ 17 oz.inRotor Inertia800g. cmShaft Diameter8mm/ 0.3 Shaft Length20mm/0.78 Motor Length112 mm/4.4 Cable Length60cm /23.6 Mouting Hole Dia5mm/0.2 Driver Model No.MB450ASupply VoltageDC 18-50VTypical Supply VoltageDC 24 -50VMicrostep Resolution400, 800, 1000, 1600, 2000, 3200, 4000, 50006400, 8000, 10000, 12800, 20000, 25000, 25600Size11.8 x 8.6 x 3.4cm/4.6 x 3.3 x 1.3 (L*W*H) MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight1950gPa ckage Content1 x Stepper Motor w Driver (Non-OEM)
More

3 Pcs Nema 23 Dual Shaft...

$129.95
eBay 3 Pcs Nema 23 Dual Shaft Stepper Motor 382 Oz-in Ship From Usa
+ $11.95 shipping
/3-pcs-nema-23-dual-shaft/2MNPXRW5QurYkU-YTTSYBw==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 4 wires, Dual Shaft Stepper Motor (3 Stepper Motors) This 382oz/in NEMA23 stepper motor is well suited for medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specification: NEMA 23 Frame, KL23H2100-30-4B 4-wire Bi-polar Holding torque 382 oz-in Hybrid Stepper Motor 1.8°/200 Steps Per Rev.3.0 Amps Current Per Phase Inductance: 7.0 mH 0.25 shaft di
More

NEMA 23 2 Phase Mill Robot...

$31.94
Rakuten.com Shopping NEMA 23 2 Phase Mill Robot Lathe CNC Stepper Motor 56mm 3A 156oz.in
Free Shipping
/nema-23-2-phase-mill/IjsKZ_5QCvDepgNxVyz-qA==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Free Shipping
Product NameStepper MotorModel No. 57HS5630A4Frame Size57 x 57mm (Nema 23)Step Angle1.8Rated Current3AMotor Resistant0. 8OhmMotor Inductance2. 4mHHolding Torque1.1 N.m/ 156 oz.inDetent Torque3.5 N.cm/ 5 oz.inRotor Inertia280g. cmShaft Diameter6.35mm/ 0.24 Shaft Length20mm/0.78 Motor Length56 mm/2.2 Cable Length55cm / 21.7 Mouting Hole Dia5mm/0.2 MaterialMetal, Plastic, Electronic PartsColorBlack, Silver ToneWeight695gPac kage Content1 x Stepper Motor (Non-OEM)
More

3pcs Nema 23 Dual Shaft...

$129.00
eBay 3pcs Nema 23 Dual Shaft Stepper Motor 425 Oz.in
+ $12.00 shipping
/3pcs-nema-23-dual-shaft/8CpmcV98wrZlvViFHtLk_A==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 8 wires, Dual Shaft Stepper Motor These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specification: 200 steps per revolution 0.25 shaft diameter with a ground flat Holding torque 425 oz-in Rated Current: 2.8A ( bipolar parallel) More Details: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-bipolar -stepper-motor-425 -oz-in-14%e2%80%9d -shaft-with-a-flat Orders within the United
More

3 Pcs Nema 23 Dual Shaft...

$149.00
eBay 3 Pcs Nema 23 Dual Shaft Stepper Motor 425 Oz-in
+ $14.95 shipping
/3-pcs-nema-23-dual-shaft/Hp1DdM77f7UvwWkN9gKcog==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 8 wires, Dual Shaft Stepper Motor These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specification: 200 steps per revolution 0.25 shaft diameter with a ground flat Holding torque 425 oz-in More Details: http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-bipolar -stepper-motor-425 -oz-in-14%e2%80%9d -shaft-with-a-flat Orders within the United States are shipped by UPS or Fedex Groun
More

Autek 2M656 2-phase 5.6A...

$174.78
Sears Marketplace Autek 2M656 2-phase 5.6A Stepper Stepping Motor Driver for Nema 23~34(CNC-17)
No Shipping Info
/autek-2m656-2phase-56a/hQcUTwFYChLwaPFr04RVWw==/info
Sears Marketplace
IN_STOCK ( In stock )
Autek 2M656 2-phase 5.6A Stepper Stepping Motor Driver for Nema 23~34(CNC-17)
More

3 Pcs Nema 23 Single Shaft...

$107.00
eBay 3 Pcs Nema 23 Single Shaft Stepper Motor 282 Oz-in
+ $12.95 shipping
/3-pcs-nema-23-single/GiQRA6Q4sLI3ZBs31hQqLw==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 4 wires, Single Shaft Stepper Motor KL 23H76-30-8A This 282oz/in NEMA23 stepper motor is well suited for medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: 282 Oz In. Hybrid 200 steps per revolution 1/4 shaft diameter with a ground flat 1.8° /200 Steps Per Rev.2.8 Amps Current Per Phase 8-wire Bi-polar NEMA 23 Frame Single Shaft M
More

Nema 23 Stepper Motor, 3.5a...

$39.00
eBay Nema 23 Stepper Motor, 3.5a 300oz In. 2.4mh Inductance
+ $10.75 shipping
/nema-23-stepper-motor/npWk4GOKu29GJPwGGbvkqw==/info
eBay
IN_STOCK ( In stock )
This auction is for a brand new Nema 23 300oz in stepper motor rated at 3.5A, 1/8 degree,1/4in shaft using 6 leads. Very few if any CNC's require more torque than these provide.Motor wiring schematic for the Gecko is listed in the pictures. *Please note when wiring these to your G540 the White, and Black center tap wires aren't used, and must be properly insulated.* *Due to high demand these units can take up to 7 days to have stock replenished in the event there sold out. The best deal on Ebay
More

3 Pcs Nema 23 Dual Shaft...

$149.95
eBay 3 Pcs Nema 23 Dual Shaft Stepper Motor 382 Oz-in
+ $13.95 shipping
/3-pcs-nema-23-dual-shaft/lLr1xeFm_bs_EKLPw4DFpQ==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 4 wires, Dual Shaft Stepper Motor 382 oz-in (3 Stepper Motors), KL23H2100-30-4B This 382oz/in NEMA23 stepper motor is well suited for medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: 200 steps per revolution Holding torque 382 oz-in 0.25 shaft diameter with a ground flat 382 oz in. Hybrid Stepper Motor 1.8° /200 Steps Per Rev.3.
More

3 Pcs Nema 23 Single Shaft...

$107.00
eBay 3 Pcs Nema 23 Single Shaft Stepper Motor 282 Oz-in 4 Wires
+ $12.95 shipping
/3-pcs-nema-23-single/efddyeS-jQQ_f2o1XyQfVg==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 4 wires, Single Shaft Stepper Motor KL 23H76-30-4A This 282oz/in NEMA23 stepper motor is well suited for medium sized motion control projects of all types. These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specifications: 282 Oz In. Hybrid 200 steps per revolution 1/4 shaft diameter with a ground flat 1.8° /200 Steps Per Rev.3.0 Amps Current Per Phase 4-wire Bi-polar NEMA 23 Frame Single Shaft M
More

3 Pcs Nema 23 Dual Shaft...

$119.00
eBay 3 Pcs Nema 23 Dual Shaft Stepper Motor 425 Oz-in Rated At 2.8a
+ $11.95 shipping
/3-pcs-nema-23-dual-shaft/uI_yOxn3rRCqmXOi3S1M1Q==/info
eBay
IN_STOCK ( In stock )
Project Artois Crejz Project Artois Crejz 3pcs Brand New NEMA23 8 wires, Dual Shaft Stepper Motor These are excellent stepper motors for your CNC router or CNC mill retrofit. Product Specification: 200 steps per revolution 0.25 shaft diameter with a ground flat Holding torque 425 oz-in More Details:http://www . automationtechnol ogiesinc.com/docs/ manuals/ KL23H286-20-8B.pdf http://www. automationtechnol ogiesinc.com/produ cts- page/nema- 23/nema-23-bipolar -stepper-motor-425 -oz-in-14%e2%80%9d -shaft-with-
More

Ma860h Stepper Motor Driver...

$81.93
eBay Ma860h Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6a-7.2a
Free Shipping
/ma860h-stepper-motor/gWJvnXLThofMHG2LJJIN0g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ma860H Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6A-7.2A More..   Top Descriptions CNC Stepper Motor Driver MA860H 2.6A-7.2A Descriptions: The MA860H Stepper Driver is a high performance microstepping driver based on pure-sinusoidal current control technology.With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better perform
More

Anaheim Automation 23md...

$85.00
eBay Anaheim Automation 23md Nema23 Stepper Motor + Driver - Cnc Diy Kit Mach3
+ $8.50 shipping
/anaheim-automation-23md/iHccJPOSXsK2OACMVvz1Cg==/info
eBay
IN_STOCK ( In stock )
NEW Anaheim Automation 23MD106S Nema23 Stepper Motor with Integrated Built-In Driver 175oz-in Torque , 12-24vdc input *Auction price is for 1 motor, I have many available * This auction is for (1) brand new Anaheim Automation nema23 stepper with 'Integrated Driver', in perfect condition .These are high quality nema23 stepper motors that have a built-in driver attached to the rear of the motor. The driver uses step/direction signals and is compatible with Mach3 break-out boards. They also have a
More

Nema 23 Stepper Stepping...

$25.99
eBay Nema 23 Stepper Stepping Motor Mount Cnc Milling Mill Drilling Router Machine
Free Shipping
/nema-23-stepper-stepping/QaDpW2ww1O6b_2OFOUK6qA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEMA 23 stepper motor mount, 45mm long Milled from Aluminum and Anodized Ships same day Description Specs This mount can be used for many CNC and robotic applications requiring NEMA 23 size servo or stepper motor:Please refer to the drawing for details. Scope Of Delivery Support 1 x NEMA 23 motor mount. We offer free after sale support for our products. Please contact us with any question and we will troubleshoot or will give you our advice. Payment Shipping Returns We accept Paypal only, pleas
More

Nema 23 Stepper Motor Single...

$42.50
eBay Nema 23 Stepper Motor Single Shaft 56mm 57bygh56-401a
Free Shipping
/nema-23-stepper-motor/cEMe2UWgzS441XOTYMjQbQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New NEMA 23 Stepper Motor Single Shaft 56mm 57BYGH56-401A Description Parameters and Specifications: ♦Step Angle Accuracy: ±5% ( full step, no load ) ♦Resistance Accuracy: ±10%- Inductance Accuracy: ±20% ♦Temperature Rise: 80 o C CMax. ( ratod current,2 phase on ) ♦Ambient Temperature: -10 o C ~ +50 o C ♦ Insulation Class: B ♦Dielectric Strength: 500V AC for one minute ♦Shaft Radial Play: 0.06Max. ( 450g-load ) ♦Shaft Axial Play: 0.08Max. ( 450 9-load ) ♦Step angle: 1.8 o
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342