Category

Building Supplies
Showing results for "nema23 stepper motor"
Results 1 - 40 of 1500+

Stepper Motor - 267 Oz.in...

$45.95
eBay Stepper Motor - 267 Oz.in Nema23 (200 Steps/rev)
Free Shipping
/stepper-motor-267-ozin/xkItIvkRYddt1DkBWCrksg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Stepper Motor - 267 oz.in NEMA23 (200 steps/rev) Description: This is our most powerful stepper motor. It has 4 leads and is classified as a hybrid stepper motor. We also have the same motor with dual shafts. Features: Step Angle (degrees): 1.8 2 Phase Rated Voltage: 3.08V Rated Current: 2.8A Holding Torque: 1.89 N.m 6.35mm / ¼ Diameter Drive Shaft Winding Resistance: 1.1 Ω Winding Inductance: 3.6 mH Detent Torque: 600 g.cm Rotor Inertia: 440 g.cm² Welcome to our eBay store!To make yo
More

3 Axis CNC Stepper Motor...

$243.32
Sears Marketplace 3 Axis CNC Stepper Motor NEMA23 Kit 24V 15A Power Supply Handle Mach3 New
No Shipping Info
/3-axis-cnc-stepper-motor/r_ttUDQDb72Cx_IHrIiQYQ==/info
Sears Marketplace
IN_STOCK ( In stock )
3 Axis CNC Stepper Motor NEMA23 Kit 24V 15A Power Supply Handle Mach3 New - Product Features: Toshiba TB6560AHQ chip - High power maximum 3.5A drive current chipset 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1 1/2 step Adjustable 1.5A-3A drive current settings for each axis - 25%50%75%100% of full current can be set for different stepper motors Overload over-current and over-temperature safety - Full protection for your computer and peripheral equipment On board current switching - Power output can be set according to specific user requirement Full closed-type optical isolation to protect the user's computer and equipment Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output) 4... Less
More

【us Ship】nema 23 Stepper...

$180.00
eBay 【us Ship】nema 23 Stepper Motor 270oz-in,3a+3 Axis Board Cnc Kit
Free Shipping
/us-shipnema-23-stepper/bS_6WzKS_tL4D1n27u79mA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Nema 23 Stepper Motor 270oz-in,3A, +3 Axis Board CNC Kit This item was shipped from CA, US to US buyers. www.longs-motor.co m This item includes: 3 pcs Nema 23 stepper motor 270 oz.in,3A, bioplar 1 pc 3 Axis Driver Board TB6560 3.5A,16 Micsteps 1 pc Power Supply 350Watts( 24VDC/14.6A) 1 pc parallel cable CD( mach3) free offering when you bought above Detailed information : 1. Nema 23 stepper motor: Model Step angel (°) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance (Ω) P
More

4 Axis Nema23 3.0A Stepper...

$140.55
Sears Marketplace 4 Axis Nema23 3.0A Stepper Motor USB Driver Board TB6560 USB CNC-DIY Controller
No Shipping Info
/4-axis-nema23-30a/d1rlqL8AWFrgbIaZTN07Pg==/info
Sears Marketplace
IN_STOCK ( In stock )
4 Axis Nema23 3.0A Stepper Motor USB Driver Board TB6560 USB CNC-DIY Controller - 1. General introductionThis USB6560T4 is a new 4 axis TB6560 CNC control board with USB input suitable for controlling max.3A 2 phase stepper motor. It's easy to operate for CNC DIY but as it's controlled by USB port users need more careful with the software install.2. Features:1) 4 axis in one unit easy handling with PC power supply & motors.2) 4 decay modes suitable for 2 phase stepper motor with no more than 3A current.3) The software designed for this board can support maximum 8pcs limit switches (Every axis with 2 pcs) much better than Mach3.4) When connected with manual control box the board can work off-line good for coordinate adjusting on tool setting part.5) 4 current setting: 0.75A 1.5A 2.25A... Less
More

【us Ship】nema 23 Stepper...

$180.00
eBay 【us Ship】nema 23 Stepper Motor 270oz-in,3a 4leads+3 Axis Board Cnc Kit
Free Shipping
/us-shipnema-23-stepper/Jtryk3bG8FYmoQsHElvJlQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Nema 23 Stepper Motor 270oz-in,3A, 4 leads +3 Axis Board CNC Kit This item was shipped from CA, US to US buyers. www.longs-motor.co m This item includes: 3 pcs Nema 23 stepper motor 270 oz.in,3A, 4 leads bioplar 1 pc 3 Axis Driver Board TB6560 3.5A,16 Micsteps 1 pc Power Supply 350Watts( 24VDC/14.6A) 1 pc parallel cable CD( mach3) free offering when you bought above Detailed information : 1. Nema 23 stepper motor: Model Step angel (°) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase R
More

Stepper Motor - 267 Oz.in...

$45.95
eBay Stepper Motor - 267 Oz.in Dual Shaft Nema23 (200 Steps/rev)
Free Shipping
/stepper-motor-267-ozin/pU-T1TaEaeYM1SvBMm43zQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Stepper Motor - 267 oz.in Dual Shaft NEMA23 (200 steps/rev) Description: This is our most powerful stepper motor and it has dual shafts. It has 4 leads and is classified as a hybrid stepper motor. We also have the same motor with a single shaft. Features: Step Angle (degrees): 1.8 2 Phase Rated Voltage: 3.08V Rated Current: 2.8A Holding Torque: 1.9 N.m 6.35mm / ¼ Diameter Drive Shaft Winding Resistance: 1.1 Ω Winding Inductance: 3.6 mH Detent Torque: 600 g.cm Rotor Inertia: 440 g.cm²
More

Nema 23 4 Wire 1.8 Degree CNC...

$31.12
Sears Marketplace Nema 23 4 Wire 1.8 Degree CNC Stepping Stepper Motor 41mm 2A 78oz.in
No Shipping Info
/nema-23-4-wire-18-degree/RCQgHVYUQPZkVUE2zJ0_6A==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

【us Ship】3pcs Nema 23 Dual...

$129.99
eBay 【us Ship】3pcs Nema 23 Dual Shaft Stepper Motor 425 Oz.in 3a 4 Leads Cnc 23hs
Free Shipping
/us-ship3pcs-nema-23/BNq00k9p4pNyGjX-lAq2kA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 pcs Nema 23 dual shaft stepper motor 425 oz.in CNC www.longs-motor.co m This item includes: 3 pcs Nema 23 stepper motor with dual shaft,425 oz.in Detailed pic: 1. Nema 23 stepper motor: Model Step angel ( ° ) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance ( Ω ) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (kg. cm2) Motor Weight (kg) 23HS9430B 1.8 115 4.8 3 1.6 6.8 425 4 0.89 1.55 BLK A GRN A- RED B BLU B- Whats more, our products are mainl
More

【us Ship】3pcs Nema 23 Dual...

$129.99
eBay 【us Ship】3pcs Nema 23 Dual Shaft Stepper Motor 425 Oz.in 3n.m 3a 4 Leads Cnc
Free Shipping
/us-ship3pcs-nema-23/Rsycm4IP5R7pXCzgmTjy_g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 pcs Nema 23 dual shaft stepper motor 425 oz.in CNC www.longs-motor.co m This item will be shipped from CA, US to US domestic buyer. This item includes: 3 pcs Nema 23 stepper motor with dual shaft,425 oz.in Detailed pic: 1. Nema 23 stepper motor: Model Step angel ( ° ) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance ( Ω ) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (kg. cm2) Motor Weight (kg) 23HS9430B 1.8 115 4.8 3 1.6 6.8 425 4 0.89 1.55
More

4 axis CNC TB6560 Stepper...

$346.21
Sears Marketplace 4 axis CNC TB6560 Stepper Motor Driver complete Kit + NEMA23 Stepper Motor *4
No Shipping Info
/4-axis-cnc-tb6560-stepper/J-vme-5ZoPD630WR_6xpEg==/info
Sears Marketplace
IN_STOCK ( In stock )
4 axis CNC TB6560 Stepper Motor Driver complete Kit + NEMA23 Stepper Motor *4 - Toshiba Tb6560Ahq Chip - High Power Maximum 3.5A Drive Current Chipset !1-1/16 Microstep Setting - Higher Accuracy And Smoother Operation Than Standard 1 1/2 Step!Adjustable 1.5A-3A Drive Current Settings For Each Axis - 25%50%75%100% Of Full Current Can Be Set For Different Stepper Motorsoverload Over-Current And Over-Temperature Safety - Full Protection For Your Computer And Peripheral Equipment !On Board Current Switching - Power Output Can Be Set According To Specific User Requirement !Full Closed-Type Optical Isolation To Protect The User'S Computer And Equipmentrelay Spindle Interface - Outputs Max. 36V 7.5A For Spindle Motors Or Coolant Pump (Only One Device Can Be Powered By This Output!)4 Channel... Less
More

【us Free Ship】3 Pcs Nema 23...

$139.99
eBay 【us Free Ship】3 Pcs Nema 23 Dual Shaft Stepper Motor 425 Oz.in 3.0a For Cnc Mill
Free Shipping
/us-free-ship3-pcs-nema/aUG4Lvs2Y4eIyc40LNBoeg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 pcs Nema 23 dual shaft stepper motor 425 oz.in CNC www.longs-motor.co m This item was sold out in US warehouse. We will ship it from China warehouse, shipping way is FedEx, shipping time is 5-7 days. This item includes: 3 pcs Nema 23 stepper motor with dual shaft,425 oz.in Detailed pic: 1. Nema 23 stepper motor: Model Step angel ( ° ) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance ( Ω ) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (kg. cm2
More

Nema23 Cnc Router Stepper...

$56.59
eBay Nema23 Cnc Router Stepper Motor 2 Phase 4-wire Gb23h282-30-4a Single Shaft 2.1nm
Free Shipping
/nema23-cnc-router-stepper/Ji54zfPZzV05ftUjekO6mg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
{{{TBR_DOMAIN_NAM E}}} eBay Item Nema23 CNC Router Stepper Motor 2 Phase 4-Wire GB23H282-30-4A Single Shaft 2.1Nm SAVEBASE is a customer satisfaction oriented online business company supplying you with the best valued and affordable accessories and parallel devices for your personal digital equipments.Enjoy peace of mind shopping experience with us. © SAVEBASE.com All Rights Reserved Only USD +P P USD * More.. Product Info Jump to :: Specifications :: What's in the Box CNC NEMA 23 Stepper Motor
More

Nema 23 4 Wire 1.8 Degree CNC...

$52.50
Sears Marketplace Nema 23 4 Wire 1.8 Degree CNC Stepping Stepper Motor 100mm 4.2A 354oz.in
No Shipping Info
/nema-23-4-wire-18-degree/J1PJgCRZ0I7ahh8aK4CdTg==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

【us Ship】3axis Nema 23...

$250.99
eBay 【us Ship】3axis Nema 23 Stepper Motor 270 Oz &driver Dm542a(24-50vdc) Cnc Mill
Free Shipping
/us-ship3axis-nema-23/J9alnNWlM14z3nm1dT2cAw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Nema 23 Stepper Motor 270 oz-in Driver DM542A CNC Kit This item includes: 3 PCS Nema 23 stepper motor with 270 oz.in biopolar 3 PCS stepper motor driver DM542A, peak 4.2A, 128 micsteps, replacing M542 1 PC Power Supply 350Watts -36VDC 1 pc parallel cable 1. Nema 23 stepper motor: Model Step angel (°) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance (Ω) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (g.cm2) Detent Torque (kg.cm) Motor Weight (kg
More

【us Ship】3axis Nema 23...

$215.00
eBay 【us Ship】3axis Nema 23 Stepper Motor 270oz-in &driver Dm542a 4.2a Cnc Router
Free Shipping
/us-ship3axis-nema-23/UGtGApW1uHOu4KvGumJkmQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 Axis Nema 23 stepper motor 270 oz.in CNC Router / Mill www.longs-motor.co m This item includes: 3 pcs Nema 23 stepper motor 270 oz.in bipolar 3 pcs Stepper motor driver DM542A, PEAK 4.2A, 128 micsteps 1 pc Power supply 350W-36vdc/9.7A 1 pc parallel cable 1 pc breakout board( free offered when you bought above) Detailed information: 1. Nema 23 stepper motor: Model Step angel ( ° ) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance ( Ω ) Phase Inductance (mH) Holding Torque
More

CNC 4 axis TB6560 Stepper...

$368.27
Sears Marketplace CNC 4 axis TB6560 Stepper Motor Driver Board with 4PCS CNC NEMA23 Stepper Motors 4 axis TB6560 Driver Kit
No Shipping Info
/cnc-4-axis-tb6560-stepper/iMdMlxOKbaYhSV_RJz_hsA==/info
Sears Marketplace
IN_STOCK ( In stock )
CNC 4 axis TB6560 Stepper Motor Driver Board with 4PCS CNC NEMA23 Stepper Motors 4 axis TB6560 Driver Kit - Product Features:1. Toshiba TB6560AHQ chip maximum 3.5A drive current chipset !2. 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1 1/2 step!3. Adjustable 1.5A -3A drive current settings for each axis - 25%50%75%100% of full current can be set for different stepper motors4. Overload over-current and over-temperature safety 5. On board current switching - Power output can be set according to specific user requirement !6. Full closed-type optical isolation to protect the user's computer and equipment7. Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)8. 4 channel inputs... Less
More

Ma860h Stepper Motor Driver...

$81.29
eBay Ma860h Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6a-7.2a
Free Shipping
/ma860h-stepper-motor/GQpW7hNAsN78opM0T3pHeA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
QUALITY-GADGETS eBay Item Ma860H Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6A-7.2A More.. CNC Stepper Motor Driver MA860H 2.6A-7.2A Descriptions The MA860H Stepper Driver is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better p
More

Nema23 CNC Router Hybrid...

$53.51
Sears Marketplace Nema23 CNC Router Hybrid Stepping Stepper Motor 112mm 4.2A 397oz.in
No Shipping Info
/nema23-cnc-router-hybrid/NOl1em-rAgM7VqS3DnWr1Q==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

Anaheim Automation 23md...

$85.00
eBay Anaheim Automation 23md Nema23 Stepper Motor + Driver - 3d Printer Rep Rap
+ $8.50 shipping
/anaheim-automation-23md/-2OHYSBIHzqOYPli0HE3Dg==/info
eBay
IN_STOCK ( In stock )
NEW Anaheim Automation 23MD106S Nema23 Stepper Motor with Integrated Built-In Driver 175oz-in Torque , 12-24vdc input *Auction price is for 1 motor, I have many available * This auction is for (1) brand new Anaheim Automation nema23 stepper with 'Integrated Driver', in perfect condition .These are high quality nema23 stepper motors that have a built-in driver attached to the rear of the motor. The driver uses step/direction signals and is compatible with Mach3 break-out boards, or they can also
More

Nema23 Cnc Router Stepper...

$70.49
eBay Nema23 Cnc Router Stepper Motor 2 Phase 4-wire Gb23h2112-30-4a Single Shaft 3
Free Shipping
/nema23-cnc-router-stepper/nb8o9qw3a2cH54Rj8osGFw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
{{{TBR_DOMAIN_NAM E}}} eBay Item Nema23 CNC Router Stepper Motor 2 Phase 4-Wire GB23H2112-30-4A Single Shaft 3 Nm SAVEBASE is a customer satisfaction oriented online business company supplying you with the best valued and affordable accessories and parallel devices for your personal digital equipments.Enjoy peace of mind shopping experience with us. © SAVEBASE.com All Rights Reserved Only USD +P P USD * More.. Product Info Jump to :: Specifications :: What's in the Box CNC Nema 23 Stepper Motor
More

Anaheim Automation 23md...

$85.00
eBay Anaheim Automation 23md Nema23 Stepper Motor + Driver - Cnc Diy Kit Mach3
+ $8.50 shipping
/anaheim-automation-23md/iHccJPOSXsK2OACMVvz1Cg==/info
eBay
IN_STOCK ( In stock )
NEW Anaheim Automation 23MD106S Nema23 Stepper Motor with Integrated Built-In Driver 175oz-in Torque , 12-24vdc input *Auction price is for 1 motor, I have many available * This auction is for (1) brand new Anaheim Automation nema23 stepper with 'Integrated Driver', in perfect condition .These are high quality nema23 stepper motors that have a built-in driver attached to the rear of the motor. The driver uses step/direction signals and is compatible with Mach3 break-out boards. They also have a
More

NEMA 23 2 Phase Mill Robot...

$76.48
Sears Marketplace NEMA 23 2 Phase Mill Robot CNC Stepper Motor 76mm 3A 255oz.in w MB450A Driver
No Shipping Info
/nema-23-2-phase-mill/5fE70kJa1zWTop0ZHbVH1A==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects. The driver supply voltage up to +50VDC, Output current up to 4.2A. 15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal. Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating. The first... Less
More

Nema23 Single Shaft...

$32.95
eBay Nema23 Single Shaft 3a/283oz-in Stepper Motor ( 23hs30 )
+ $6.70 shipping
/nema23-single-shaft/xgLxCw28fc9mpHdKCqhmiQ==/info
eBay
IN_STOCK ( In stock )
Brand New NEMA23 bipolar stepper motor. This is a 3A, 1.8deg, single shaft model with holding torque 283 oz-in/2 N.m. The shaft is 8mm diameter and 18.75mm long. Connection is made through 4-wires (Black, Green, Blue, Red) 500mm long stripped and tinned.See specification sheet for more details.This model can be re-ordered and supplied in bulk as required. Alltronics part#23HS30, this has the same specification as our old #28M085 motor. For more information see http://www.alltron ics. com/mas_asset
More

Nema23 4 Lead CNC Router...

$39.89
Sears Marketplace Nema23 4 Lead CNC Router Robot Stepping Stepper Motor 76mm 3A 255oz.in
No Shipping Info
/nema23-4-lead-cnc-router/XBqu0-Qf-V3xhi9T1pVJvg==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

Cnc Diy M335 Cnc Stepper...

$29.19
eBay Cnc Diy M335 Cnc Stepper Driver Support Nema17, Nema23 Stepper Motors 0.5a-3.5a
Free Shipping
/cnc-diy-m335-cnc-stepper/NxQKZIjiU42zxnNI8RRhLA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
CNC DIY M335 CNC Stepper Driver Support Nema17, Nema23 Stepper Motors 0.5A-3.5A More..   M335 High Performance and Low Cost Microstepping Driver Descriptions The M335 is a high performance microstepping driver with low price. The M335 adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema16-Nema23 stepper motors with a 0.5A-3.5A current will be suitable. If you are loo
More

Nema 23 4 Lead 1.8 Degree CNC...

$70.12
Sears Marketplace Nema 23 4 Lead 1.8 Degree CNC Stepper Motor 56mm 3A 156oz.in w MB450A Driver
No Shipping Info
/nema-23-4-lead-18-degree/YskzCmtm41CBTp_5vzE7wA==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects. The driver supply voltage up to DC 50V, Output current up to 4.2A. 15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal. Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating. The first... Less
More

(2) Anaheim Automation 23md...

$145.00
eBay (2) Anaheim Automation 23md Nema23 Stepper Motor + Driver -cnc Diy Kit Mach3
+ $9.50 shipping
/2-anaheim-automation/aukPEBl24I2DTZxxmP7NEw==/info
eBay
IN_STOCK ( In stock )
NEW (2)Anaheim Automation 23MD106S Nema23 Stepper Motors with Integrated Built-In Driver 175oz-in Torque , 12-24vdc input *Auction price is for 2 motors, I have many available * This auction is for (2) brand new Anaheim Automation nema23 stepper with 'Integrated Driver', in perfect condition .These are high quality nema23 stepper motors that have a built-in driver attached to the rear of the motor. The driver uses step/direction signals and is compatible with Mach3 break-out boards. They also h
More

Ma860h Stepper Motor Driver...

$80.49
eBay Ma860h Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6a-7.2a
Free Shipping
/ma860h-stepper-motor/Kvu8yzzYGThr2uqdNNYPaw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
QUALITY-GADGETS eBay Item Ma860H Stepper Motor Driver Support Nema 23 / 34 / 42 Stepper Motor 2.6A-7.2A More.. CNC Stepper Motor Driver MA860H 2.6A-7.2A Descriptions The MA860H Stepper Driver is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better p
More

【us Ship&free Ship】4axis Nema...

$389.00
eBay 【us Ship&free Ship】4axis Nema 23 Stepper Motor435oz 4.2a 115mm Length &driver
Free Shipping
/us-shipfree-ship4axis/06Wq6K9R9js4NsddjpXrlg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Promotion!!4Axis Nema 23 Stepper Motor435oz 4.2A 115mm length Driver(24​-50VDC) Latest News: Congratuation!!! Our company Longs Motor has an warehouse in US from July,2012. And this item will be shipped from US local warehouse by UPS. US Customers (except for Alaska, Hawaii Puerto Rico) will receive this item fastly. The more importance is that US customers dont need to pay Import Custom duty fees. (Becuase it is domestic shipping) www.longs-motor.co m This item includes: 4 pcs Nema 23 stepper
More

Nema23 4 Lead CNC Router...

$67.50
Sears Marketplace Nema23 4 Lead CNC Router Robot Stepper Motor 41mm 2A 78oz.in w MB450A Driver
No Shipping Info
/nema23-4-lead-cnc-router/fJg2O1EavO88SWfA10cISQ==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects. The driver supply voltage up to +50VDC, Output current up to 4.2A. 15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal. Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating. The first... Less
More

【us Ship】 promote4axis Nema...

$380.99
eBay 【us Ship】 promote4axis Nema 23 Stepper Motor435oz 4.2a Length &driver Cnc Router
Free Shipping
/us-shippromote4axis/2wnc0FGr-YsBmSTHCQsXeA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Promotion!!4Axis Nema 23 Stepper Motor435oz 4.2A 115mm length Driver(24​-50VDC) Latest News: Congratuation!!! Our company Longs Motor has an warehouse in US from July,2012. And this item will be shipped from US local warehouse by UPS. US Customers (except for Alaska, Hawaii Puerto Rico) will receive this item fastly. The more importance is that US customers dont need to pay Import Custom duty fees. (Becuase it is domestic shipping) www.longs-motor.co m This item includes: 4 pcs Nema 23 stepper
More

【us Ship】4axis Nema 23...

$235.99
eBay 【us Ship】4axis Nema 23 Stepper Motor 290oz-in &4-axis Tb6560 Driver3.5a Cnc
Free Shipping
/us-ship4axis-nema-23/FWZCwzR-UqIgfxTF26YUjQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
4Axis Nema 23 Stepper Motor 290 oz-in Driver CNC kit Shipped from US to US buyer. More faster!! www.longs-motor.co m This item includes: 4 PCS Nema 23 stepper motor with 290 oz.in biopolar 1 PC Four-axis driver board, 3.5A,16 micsteps 1 PC Power Supply 200Watts (24VDC/8.3A) Detailed information 1. Nema 23 stepper motor: Model Step angel (°) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance (Ω) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (g.cm2
More

4 Axis 1.2N Stepper Motor...

$347.03
Sears Marketplace 4 Axis 1.2N Stepper Motor 3.5A Driver TB6560 Nema23 USB Interface Board CNC Kit
No Shipping Info
/4-axis-12n-stepper-motor/awHrBzgD8DX-gedQ8Va2hA==/info
Sears Marketplace
IN_STOCK ( In stock )
4 Axis 1.2N Stepper Motor 3.5A Driver TB6560 Nema23 USB Interface Board CNC Kit - 1.CNC USB Interface Breakout BoardElectrical performance: Input Power:5V DC power supply or computer USB to take powerWork axis stepper:Received the highest 5-axis independent drivingDrive: Pulse + direction + enable signalWeight: About 200G2.Stepper Motor DriverElectrical parameters:Input voltage DC 12 ~ 36V inputThe input current of 1 to 4 amps select the drive a stepper motor.Output current of 0.5A ~ 3.5ATemperature Operating Temperature -10 to 45 â ; Storage temperature -40 â to 70 â Humidity not condensing not dropsGas prohibit combustible gas and conductive dustWeight: 200g1. the definition of control signals:PUL +: step pulse signal is input side or the positive pulse signal input positive... Less
More

【us Ship】 promote4axis Nema...

$380.99
eBay 【us Ship】 promote4axis Nema 23 Stepper Motor435oz 4.2a 115mm Length &driver
Free Shipping
/us-shippromote4axis/VJakBc-pggv2Mf3LwbWlyw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Promotion!!4Axis Nema 23 Stepper Motor435oz 4.2A 115mm length Driver(24​-50VDC) Latest News: This cnc kit was promoted, just for 10 sets, please dont miss it.This item was in US warehouse, shipped from CA, US to US buyers.(except for Alaska, Hawaii Puerto Rico) www.longs-motor.co m This item includes: 4 pcs Nema 23 stepper motor with 435 oz.in 4 pcs stepper motor driver DM542A, peak 4.2A, 128 micsteps, replacing M542 2 pc Power supply 350Watts (36VDC/9.7A) 1 pc Breakout board 1 pc Parallel cab
More

【us Ship】 3axis Nema 23...

$285.00
eBay 【us Ship】 3axis Nema 23 Stepper Motor 425oz-in Dual &driver Dm542a Cnc Router
Free Shipping
/us-ship-3axis-nema-23/h-E5sy_gW1BdyofM5pomPA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 Axis Nema 23 stepper motor 425oz.in CNC Router / Mill Latest News: Congratuation!!! Our company Longs Motor has an warehouse in US from July,2012. And this item will be shipped from US local warehouse by UPS. US Customers (except for Alaska, Hawaii Puerto Rico) will receive this item fastly. The more importance is that US customers dont need to pay Import Custom duty taxes. (Becuase it is domestic shipping) www.longs-motor.co m This item includes: 3 pcs Nema 23 stepper motor 425 oz.in bipolar
More

NEMA 23 2 Phase Mill Robot...

$33.33
Sears Marketplace NEMA 23 2 Phase Mill Robot Lathe CNC Stepper Motor 56mm 3A 156oz.in
No Shipping Info
/nema-23-2-phase-mill/WUewLr6oRqQFp4oIE3RTsg==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

【us Ship】 promote4axis Nema...

$380.99
eBay 【us Ship】 promote4axis Nema 23 Stepper Motor435oz 4.2a 115mm Length &driver
Free Shipping
/us-shippromote4axis/vU4PK4YN8IVrdKrwU-ocLQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Promotion!!4Axis Nema 23 Stepper Motor435oz 4.2A 115mm length Driver(24​-50VDC) Latest News: Congratuation!!! Our company Longs Motor has an warehouse in US from July,2012. And this item will be shipped from US local warehouse by UPS. US Customers (except for Alaska, Hawaii Puerto Rico) will receive this item fastly. The more importance is that US customers dont need to pay Import Custom duty fees. (Becuase it is domestic shipping) www.longs-motor.co m This item includes: 4 pcs Nema 23 stepper
More

Cnc Mill Router Cutter Nema...

$69.89
eBay Cnc Mill Router Cutter Nema 23 Stepper Motor 3nm High Torque Smooth Low Noise 3a
Free Shipping
/cnc-mill-router-cutter/JzvzLo_nyepwqEs_55V4CA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
QUALITY-GADGETS eBay Item CNC Mill Router Cutter Nema 23 Stepper Motor 3Nm High Torque Smooth Low Noise 3A More.. CNC Nema 23 Stepper Motor GB23H2112-30-4A 425 Oz-in Descriptions You are concerned about the latest Nema23 GB23H2112-30-4A hybrid stepper motor, it can work very well with the TB6560, M542, M542H, 2M542, DM542A, DQ542MA, MA860H, 2MA860, DM860A and DQ860MA etc stepper drivers in the market. Due to the high 425 Oz-in holding torque, low vibration and low noise, this motor can be widel
More

NEMA 23 2 Phase Mill Robot...

$30.25
Sears Marketplace NEMA 23 2 Phase Mill Robot Lathe CNC Stepper Motor 51mm 2.5A 156oz.in
No Shipping Info
/nema-23-2-phase-mill/ieaLIOsGxpMDokNSv5vxqg==/info
Sears Marketplace
IN_STOCK ( In stock )
It is 2 phase. 1.8 Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.. For more detail information about the motor, please enter the website: http://54.235.23.9 6 /watch_images/57H S5630A4.png
More

Cnc Router Cutter Diy Unit...

$70.89
eBay Cnc Router Cutter Diy Unit Nema23 Stepper Motor 3 High Torque Bipolar 3a
Free Shipping
/cnc-router-cutter-diy/wJQUEy3H7A4qk66zp24Xqg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New CNC Router Cutter DIY Unit Nema23 Stepper Motor 3 Nm High Torque Bipolar 3A More..   Top Descriptions CNC Nema 23 Stepper Motor GB23H2112-30-4A 425 Oz-in Descriptions You are concerned about the latest Nema23 GB23H2112-30-4A hybrid stepper motor, it can work very well with the TB6560, M542, M542H, 2M542, DM542A, DQ542MA, MA860H, 2MA860, DM860A and DQ860MA etc stepper drivers in the market. Due to the high 425 Oz-in holding torque, low vibration and low noise, this motor can be widely used
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-26615
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-26615