Showing results for "neck mandrel"
Results 1 - 40 of 1500+

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 25 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/jOogCdYkTMSfz0UF15eC4w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 17 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/-eOwsPf-yPmt5gR4ceCX-Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

Lyman Outside Neck Turner and...

$37.99
MidwayUSA Lyman Outside Neck Turner and Multi-Pack
+ $4.99 shipping
/lyman-outside-neck-turner/vu5_NE1-EKpqD0Uf0CyXQA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Outside Neck Turner was designed for use with Lyman's Universal Trimmer and AccuTrimmer. It provides uniform case neck wall thickness and outside neck diameter. Essential for case reforming. Adjustable cutter removes minimum brass to attain uniformity. Cutter blade can be adjusted to any diameter from .195 to .405. Technical Information: Fits: Lyman Universal or Accutrimmer Material: Steel Calibers Size Accepted:22 Caliber to 375 Caliber with the appropriate mandrel installed Pilots Used: Lyman Outside Neck Turner Mandrels Features: Cuter is adjustable for length of cut and rate of feed Notes: Includes two extra cutting blades that can be adjusted from .195 to .405, and mandrels to turn 22-30 caliber necks.
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 22 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/4M4j7q8ZAny_xASx2i6vfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 30 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/S5xduLq6IQIjTDsOFFFOFA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 270 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/UDIs_2hXPIq2vtqbXTq8Zw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 6.5mm
+ $4.99 shipping
/km-expand-mandrel-for/WiHjWFPsZqy_SDCEgQmEXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 20 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/WwTFEjF3q0ZugOLYRF-Fag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 338 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/raZeuXHJxn_pzrngTVltgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

Eastwood High Speed Mandrel...

$3.58
Eastwood.com Eastwood High Speed Mandrel For Abrasive Rolls 1/4x 6
+ $6.95 shipping
/eastwood-high-speed/UDvaiiDT7hUlwnAs6ZNDwg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
This high speed abrasive roll mandrel is 6 long with a 1/4 shank. The 1/8 diameter pilot is 1 long. For best results use this and all Abrasive Roll Mandrels with light side pressure to avoid bending. For a smoother cut & longer abrasive life use Grinders Grease (13119). We recommend the use of a dust mask like our Disposable Dust Masks (22055) pk of 20, Goggles (43090), and ear protection during all grinding operations.
More

Necklace Mandrel - Steel -...

$53.95
eBay Necklace Mandrel - Steel - 43-055
+ $15.00 shipping
/necklace-mandrel-steel/HWSwe5DUSWfz1jAyWYmLDw==/info
eBay
IN_STOCK ( In stock )
This necklace mandrel is made out of steel and is perfect for designing, forming, and displaying necklaces. You can secure it to your work surface and hammer metal directly on it, or you can use it for working with wax, PMC, or wire. It can also be used to display finished work, as it has a polished surface with finished edges. The neck circumference is 28 cm (11”). Overall measures 18.5 x 18.5 x 12 cm (7.3 x 7.3 x 4.7”). Weight: 5 lb 4 oz (2.4 kg)Made in India
More

Helicoil 6-32,Mandrel,...

$227.03
Walmart.com Helicoil 6-32,Mandrel, Tangless Gage Style, 7571-06-3B
Free Shipping
/helicoil-632mandrel/-cPEH-LGFiMRSGzoCY5BYg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Mandrel, Tangless Gage Style, Thread Type UNC, Use With Internal Thread Size 6-32, For Use With 6-32 Heli-Coil(r)Tangle ss Inserts, Heli-Coil(r) Tangless Insert Installation, Includes Gage Style Tangless Installation Tool MandrelFeaturesTh read Type : UNCIncludes : Gage Style Tangless Installation Tool MandrelConstructi on : MachinedType : Tangless Gage StyleSize : 6-32Use With Internal Thread Size : 6-32Item : MandrelApplicatio n : Heli-Coil(R) Tangless Insert Installation
More

Eastwood Mandrel 1/4 Inch...

$7.33
Eastwood.com Eastwood Mandrel 1/4 Inch Shank Wheel Arbor
+ $6.95 shipping
/eastwood-mandrel-14-inch/m04bIBK-ON15PnYY4hl5nA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Fits any wheel with a 1/2 arbor hole. Can be mounted in most drills and dies.
More

Wire Wrap Mandrel

$8.89
Artbeads.com Wire Wrap Mandrel
Free Shipping
/wire-wrap-mandrel/wgg8h7uh5GfM9WxnK-kakw==/info
Artbeads.com
IN_STOCK ( In stock )
Free Shipping
Made of stainless steel with a non-slip PVC handle, this mandrel will give you consistent size loops time after time. This tool offers five different diameters of 1.5, 2.5, 3.5, 4.5 and 5mm for whatever sized loop you need. Use it for making loops in wire work, or coil wire around the mandrel and cut to make your own jump rings. Nicely rounded and extremely smooth so wire will not be scratched.
More

Lot Of 3800 Precision Wire...

$319.46
eBay Lot Of 3800 Precision Wire Components 700062001-001 Necking Mandrel .0165x 12
+ $9.95 shipping
/lot-of-3800-precision/OKkcnJyNqdR26ehSZgSxLw==/info
eBay
IN_STOCK ( In stock )
description Product Description: This is a Lot of 3800 Precision Wire Components 700062001-001 Necking Mandrel .0165x 12These are a new item. Only items pictured are included - If a part is not pictured, or mentioned above, then it is not included in the sale. Items are sold As-Is unless specified otherwise - Don't assume and item is working unless it specifically states item is tested and works in the auction. Some of our items are listed as parts or repairs under condition. These items may
More

Eastwood Mini Mandrel 1/4...

$7.33
Eastwood.com Eastwood Mini Mandrel 1/4 Inch Shank
+ $6.95 shipping
/eastwood-mini-mandrel-14/TDW1KTh49TgfDajiTmQfpw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
1/4 shank made of proper strength steel to withstand years of tough use.
More

Mandrels - #4 Point Mandrel...

$13.99
Brownells Mandrels - #4 Point Mandrel (3)
+ $7.95 shipping
/mandrels-4-point/LTpUHneqyw44j2ifeMehug==/info
Brownells
IN_STOCK ( In stock )
Store not rated
#4 Point Mandrel, 1/8 shank diameter, fits 1/16 (1.59mm) arbor hole. #6 Point Mandrel, 1/8 shank diameter fits 1/8 arbor hole. 25,000 rpm max. Mandrels sold 3 each per pkg. Try-Pak contains 1 of each size. Mfg: Cratex
More

Conetastic Cone Mandrel Set

$22.49
GoodyBeads Conetastic Cone Mandrel Set
+ $3.99 shipping
/conetastic-cone-mandrel/pHO9CKxYqwyQMF-yzAwdDA==/info
GoodyBeads
IN_STOCK ( In stock )
Store not rated
Conetastic Cone Mandrel Set. This tool is used to create custom bead cones and bead caps for strung designs, earrings, and more! The different sizes of cone mandrels fit into the base of the tool for easy storage. To use, simply insert your desired mandrel into the base and tighten into place with the included Allen wrench. Place your wire into the insertion hole in the mandrel, hold it in place with your thumb, then gently twist the mandrel until the wire spiral reaches the top.
More

MANDREL 1/8 SCREW

$4.99
Walmart.com MANDREL 1/8 SCREW
+ $4.35 shipping
/mandrel-18-screw/lM2NGb35Vgw6bGERDrFe3Q==/info
Walmart.com
IN_STOCK ( In stock )
YLH1010FeaturesHi gh quality mandrel allows you to mount your favorite Gyros accessoriesStrong , true running, and vibration- freeFor craftsmen, model makers, hobbyists, and do-it-yourself hardware applications1/8'' shank1/4'' body1/8'' screw DimensionsFor motor tools with 1/8'' collets and accessories with 1/8'' diameter holeOverall Product Weight: 0.01 lbs
More

Eastwood High Speed Mandrel...

$3.58
Eastwood.com Eastwood High Speed Mandrel For Abrasive Rolls 1/4x 4
+ $6.95 shipping
/eastwood-high-speed/C3opkZp8dX1j8tI7-qu6og==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
High speed: 22,000 rpm max.
More

#402 Mandrel - Mandrel

$3.25
Brownells #402 Mandrel - Mandrel
+ $7.95 shipping
/402-mandrel-mandrel/853C5SQ4Dj734omQX9Nx9Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
To be used with all cutting wheels, sanding discs and polishing wheels. 1/8 (3.2mm) shank. Mfg: Dremel
More

Eastwood Facer Buff 2...

$9.43
Eastwood.com Eastwood Facer Buff 2 Diameter w/1/4 Mandrel
+ $6.95 shipping
/eastwood-facer-buff-2/cNtK3OA4nAAccEzFpm7J8w==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Get in Tight With These Buffs. These unique buffs will help you reach into deep recessed areas on your project. Great to use when the area is too large for a felt bob. Like the larger mushroom buff above, they feature 1/4 hex shafts and plastic ferrules. Max. rpm 10,000.Do you have a product idea? Click Here to suggest it!
More

3M 933 Mandrel

$6.64
Walmart.com 3M 933 Mandrel
+ $5.00 shipping
/3m-933-mandrel/9B3r1VU7Z8b6jdhtftuhGQ==/info
Walmart.com
IN_STOCK ( In stock )
Mandrel, Shank Dia. (In.) 1/4, Length (In.) 2, Max. RPM 14,000, Washer O.D. (In.) 1, For Use With Unitized Wheels, Bench Motors, Grinders or Drills, High Strength Clean and Strip DiscsFeaturesLeng th (In.) : 2Max. RPM : 14,000Shank Dia. (In.) : 1/4Washer O.D. (In.) : 1Item : Mandrel
More

Hedman Hedders 12080 120deg...

$23.77
Autoplicity Hedman Hedders 12080 120deg Mandrel Bends 2-3/8 Diameter 4-1/2 And 1
+ $5.00 shipping
/hedman-hedders-12080/IjNeA4EgmIOQM3VEU5taEQ==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Hedman Hedders 12080 120deg Mandrel Bends 2-3/8 Diameter 4-1/2 And 12-1/2 Leg Length 3-3/4 Rad Hedman Husler offers mandrel bends in 90, 120, and 180tubing formed from 16 or 18 gauge steel.120 Mandrel Bend2-3/8 Diameter
More

10 Pcs 2.35 mmx16mmx50mm...

$6.66
Walmart.com 10 Pcs 2.35 mmx16mmx50mm Round Shank Abrasive Cloth Sandpaper Split Mandrel
Free Shipping
/10-pcs-235mmx16mmx50mm/oso2mnbf7BgnYlqVtr3tDw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The split mandrel is designed with 2.35mm shank.The split part of this mandrel is 16mm in diameter and 50mm long.For use with your sandpaper, polishing papers, or other cloth-based abrasives. 
More

100pcs 1/8 Inch Mandrel...

$7.95
Banggood 100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel-Saw Blades
Free Shipping
/100pcs-18-inch-mandrel/CS2AIn-krU18kYyTeL6nkw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
10% OFF for More Dremel Accessories, Please Click Here. Description: 100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel Specification: Disc Diameter: Approx. 32mm/1.26 Disc Thickness: Approx. 0.9mm/0.035 Shank Diameter: Approx. 1/8 Shank Length: Approx. 37mm/1.47 Quantity: 100pcs Cut Off Wheel Disc + 1pcs Mandrel Features: The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Great for contractors and the home hobbyist. Fits Dremel Craftsman Chicago and more. Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials- including thin wood, plastics and ceramics. Cut bolts or screws or make slots in rusted or stripped bolts and screws. Please note: 1. The cut-off... Less
More

2 Piece Mandrel Set - Wire...

$14.99
Walmart.com 2 Piece Mandrel Set - Wire Looping Tool - 10 Different Diameters
+ $2.00 shipping
/2-piece-mandrel-set/I6DWfU8Pg053CU41y28ryg==/info
Walmart.com
IN_STOCK ( In stock )
Create uniform and consistent loops in your wire work. These Mandrels are stainless steel with precise steps for different sizing. Small mandrel can make loops in 1.5, 2.5, 3.5, 4.5, and 5mm Large mandrel can make loops in 6, 7, 8, 9, and 10mm Non-Slip PVC handle for ease of use. We always recommend wearing protective eye-wear when working with tools. Each mandrel is 6 inches total length. You will receive a package with two mandrels.
More

Hedman Hedders 12075 120deg...

$20.59
Autoplicity Hedman Hedders 12075 120deg Mandrel Bends 1-3/4 Tube Diameter 3-1/2
+ $5.00 shipping
/hedman-hedders-12075/fawFAj3J827mUf9i_47DVg==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Hedman Hedders 12075 120deg Mandrel Bends 1-3/4 Tube Diameter 3-1/2 And 14-1/2 Leg Length3 Rad Hedman Husler offers mandrel bends in 90, 120, and 180tubing formed from 16 or 18 gauge steel.120 Mandrel Bend1-3/4 Diameter
More

Tapered Rolls - Abrasive...

$4.99
Brownells Tapered Rolls - Abrasive Mandrel
+ $7.95 shipping
/tapered-rolls-abrasive/7b19ZJlhKjDHMneyl06FIw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Get into tighter places more easily. Tough, aluminum oxide grit bonded to heavy-duty cloth backing. Mfg: Merit Abrasive Products, Inc. SPECS: 3/8 (9.5mm) base diameter, taper to ¼ (6.3mm) diameter at tip. 1 (2.5cm) long. Resin Bond. Packed 10 rolls of single grit per bag. Maximum speed: 18,000 rpm.
More

DREMEL 401 Mandrel, Screw

$2.34
Walmart.com DREMEL 401 Mandrel, Screw
+ $5.00 shipping
/dremel-401-mandrel-screw/It4f9S05AiVUQE9S42N5Yg==/info
Walmart.com
IN_STOCK ( In stock )
Screw Mandrel, Used with Polishing WheelsFeaturesIte m : Mandrel Screw
More

Right Angle Wire Mandrel -...

$5.99
Walmart.com Right Angle Wire Mandrel - Wire Looping Tool - 4 Shapes / 48 Sizes
+ $2.00 shipping
/right-angle-wire-mandrel/SkDqNUnT8cUJ_E7HrdAPzw==/info
Walmart.com
IN_STOCK ( In stock )
Create uniform and consistent loops in your wire work in fancy shapes This Mandrel is sturdy plastic and lightweight, easy to use! Make round loops in 12 different sizes, oval loops in 12 sizes, square loops in 12 sizes and triangle loops in 12 sizes.After forming a shape, be sure to harden it using a Wire Whacker or Plastic Hammer and Bench Block.We always recommend wearing protective eye-wear when working with tools. Each mandrel is 8.5 inches total length. Instruction sheet is included with each mandrel.
More

6mm Mandrel

$19.49
eBay 6mm Mandrel
Free Shipping
/6mm-mandrel/DP9cFun1sBho_3-jMLBp-Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Product Name 6mm Mandrel Features and Benefits: Steel for use with thread setting tools Length: 4.44 Width: 0.61 Height: 0.61 Item Weight: 0.01 lbs Seller Terms Conditions 1. Shipping Shipping charges: Standard shipping is FREE! Standard shipping takes 3 to 7 (2 day handling time + 1-5 days transit time) business days from 12PM EST on the date your order is entered into our system. Expedited shipping is $7.95. Expedited shipping takes 3 to 5 (2 day handling time + 1-3 days transit time) busi
More

Norton Drill-mount Mandrel...

$12.85
eBay Norton Drill-mount Mandrel For 2 - 3 Cut-off Wheels (pack Of 1)
Free Shipping
/norton-drillmount/Yq_r-e7881KnW07RbJRZyg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Norton Drill-Mount Mandrel for 2 - 3 Cut-off Wheels (Pack of 1)Item Description The Norton Drill-Mount Mandrel allows safe mounting of 2 to 3 diameter cut-off blades onto most electric and air die grinders and drills. It is designed to fit small diameter cut-off wheels with a 3/8 arbor hole. These small diameter reinforced cut-off blades allow fast cut-off and slotting on all types of metal. One mandrel is included in each pack. A drill-mount mandrel attaches to the drill in the same way th
More

Cylinder Rolls - Abrasive...

$4.99
Brownells Cylinder Rolls - Abrasive Mandrel
+ $7.95 shipping
/cylinder-rolls-abrasive/IqtVoPaiMTJD0b_JWoAGCw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Solid-wound cylinders of Aluminum Oxide abrasive cloth. Ideal for shaping and getting into tight places you cant reach with any other polishing/grindin g head. Mfg: Merit Abrasive Products, Inc. SPECS: 3/8 dia. x ¾ long. Grits 60; 120; 240; 320 (resin bond). 10 rolls of single grit per bag. Maximum speed: 20,000 rpm.
More

Neck Mandrel Necklace Forming...

$39.75
eBay Neck Mandrel Necklace Forming Anvil Jewelry Tool
Free Shipping
/neck-mandrel-necklace/ukmH1hzLqJ4ZiZUE-Qquhw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Document Neck Mandrel Necklace Forming Anvil Jewelry Tool FREE SHIPPING ALUMINUM Necklace Mandrel Color: Black To shape necklaces perfectly and easily a neck mandrel is essential. You can work metals or use the neck mandrel to form wax . Your necklaces will be the perfect length and fit every time. Weight: 1.85 Lbs Unit dim: 7-1/2''''L x 7''W x 4-5/8'' Quantity: 1 CONTINENTAL USA (excludes: HI, AK, PR, GU, and VI ) shipping ONLY Shipping and Handling Fee: FREE SHIPPING Ground Service NO PO
More

Mandrel Assembly, Norton,...

$10.85
Walmart.com Mandrel Assembly, Norton, 66261009502
+ $5.00 shipping
/mandrel-assembly-norton/ZNNw0SN7zcH5HvuqtgaV-w==/info
Walmart.com
IN_STOCK ( In stock )
Mandrel Assembly, Shank Dia. 1/4 In., Pilot Dia. 1/4 In., Pilot Length 2-1/2 In., Fits Hole 1/4 In., Thread Size 1/4-20 In., For Use With High Strength DiscsFeaturesItem : Mandrel AssemblyThread Size : 1/4-20Pilot Dia. : 1/4Pilot Length : 2-1/2Shank Dia. : 1/4Fits Hole : 1/4
More

Ring Sizing Mandrel Light...

$4.25
Walmart.com Ring Sizing Mandrel Light Weight Plastic Sizes 1-15
+ $2.00 shipping
/ring-sizing-mandrel-light/uR-N-sk4vyMGmx7o1peU8Q==/info
Walmart.com
IN_STOCK ( In stock )
Used in this video tutorial:How To Use A Ring Sizer And MandrelAccurate ring sizer takes the guess work outThis mandrel is light weight hollow plastic with clear white markings Sizes 1 up to 15, including quarter sizes.Each mandrel is 12.5 inches total length. Includes secure metal loop on handle so you can loop a cord through and have it easily available.
More

Hedman Hedders 12077 120deg...

$21.78
Autoplicity Hedman Hedders 12077 120deg Mandrel Bends 2 Tube Diameter 3-1/2 And
+ $5.00 shipping
/hedman-hedders-12077/x8wd2j6085jQCIOwlaPBqg==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Hedman Hedders 12077 120deg Mandrel Bends 2 Tube Diameter 3-1/2 And 14-1/2 Leg Lengths 3 Rad Hedman Husler offers mandrel bends in 90, 120, and 180tubing formed from 16 or 18 gauge steel.120 Mandrel Bend2 Diameter
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335