Showing results for "neck mandrel"
Results 1 - 40 of 1500+

Lyman Outside Neck Turner...

$14.49
MidwayUSA Lyman Outside Neck Turner 6-Piece Mandrel Multi-Pack Set 22 to 30 Caliber
+ $4.99 shipping
/lyman-outside-neck-turner/nqL745NioiaaJJp5nQuBhA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This mandrel multi-pack set is designed for the Lyman outside neck turner and includes all the sized necessary to turn 22-30 caliber rifle cases. Technical Information: Material: Steel Notes: Includes the following pilots: 22 caliber 243 caliber 25 caliber 270 caliber 7mm 30 caliber Special Note: This is the same 6-piece set that is included with the Lyman outside neck turner.
More

Lyman Outside Neck Turner...

$14.49
MidwayUSA Lyman Outside Neck Turner 6-Piece Mandrel Multi-Pack Set 22 to 30 Caliber
+ $4.99 shipping
/lyman-outside-neck-turner/nqL745NioiaaJJp5nQuBhA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This mandrel multi-pack set is designed for the Lyman outside neck turner and includes all the sized necessary to turn 22-30 caliber rifle cases. Technical Information: Material: Steel Notes: Includes the following pilots: 22 caliber 243 caliber 25 caliber 270 caliber 7mm 30 caliber Special Note: This is the same 6-piece set that is included with the Lyman outside neck turner.
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 264 Caliber, 6.5mm
+ $4.99 shipping
/hornady-neck-turning-tool/Q0mBD2HwOPaX4RdHWS0oBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

K&M Expand Mandrel Window...

$18.99
MidwayUSA K&M Expand Mandrel Window Riser
+ $4.99 shipping
/km-expand-mandrel-window/SsOFZ0_Zh4mbhWF01BqKXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Expand Mandrel Window Riser is a simple device that brings the case neck expanding above the press and allows for full visual of the operation through a viewing window. - Additional images with available accessories shown. Used with K&M Expander Iron Assemblies or Press Adapter (436584) (Not Included). Technical Information: Fits: K&M Expander Iron Assembly or Press Adapter (436584)
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 30 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/zPtl1hHWShoL6bt8rugFFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 35 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/WHOXMjSk321pgn0ZHNDHRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 17 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/xCvTGCB-M6RF94ifToJXRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Sinclair Neck Turning Mandrel...

$9.99
Brownells Sinclair Neck Turning Mandrel - Sinclair Neck Turning Mandrel, 7 Mm
+ $7.95 shipping
/sinclair-neck-turning/3FsmTiUZhhLuaho4JfiYcQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
More

Lot Of 3800 Precision Wire...

$319.46
eBay Lot Of 3800 Precision Wire Components 700062001-001 Necking Mandrel .0165x 12
+ $9.95 shipping
/lot-of-3800-precision/OKkcnJyNqdR26ehSZgSxLw==/info
eBay
IN_STOCK ( In stock )
description Product Description: This is a Lot of 3800 Precision Wire Components 700062001-001 Necking Mandrel .0165x 12These are a new item. Only items pictured are included - If a part is not pictured, or mentioned above, then it is not included in the sale. Items are sold As-Is unless specified otherwise - Don't assume and item is working unless it specifically states item is tested and works in the auction. Some of our items are listed as parts or repairs under condition. These items may
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 338 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/dLaGl2UAVfUMAOOrnXXFkg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 284 Caliber, 7mm
+ $4.99 shipping
/hornady-neck-turning-tool/GQeZUPEaWZVUReskysRoPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 243 Caliber, 6mm
+ $4.99 shipping
/hornady-neck-turning-tool/dfJV7nPfhtdpAbnwcJ3BRg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Sinclair Neck Turning Mandrel...

$9.99
Brownells Sinclair Neck Turning Mandrel - Sinclair Neck Turning Mandrel, 30 Cal
+ $7.95 shipping
/sinclair-neck-turning/WdOVjergMoa0uSGm4EFWNA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
More

Polished Necklace Mandrel

$85.49
eBay Polished Necklace Mandrel
Free Shipping
/polished-necklace-mandrel/pBe0wlKCHksOn6BYILdUNw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Click Here. Double your traffic. Get Vendio Gallery - Now FREE! Polished Necklace Mandrel To shape necklaces perfectly and easily a neck mandrel is essential. You can work metals or use the neck mandrel to form wax . Your necklaces will be the perfect length and fit every time. Measures 8-1/2 x 7-3/4 x 4 3/4. Condition: New andale andalesell Payment Options: PayPal Shipping
More

Sinclair Neck Turning Mandrel...

$9.99
Brownells Sinclair Neck Turning Mandrel - Sinclair Neck Turning Mandrel, 6 Mm
+ $7.95 shipping
/sinclair-neck-turning/tRV7dxfIxbvNLELcFtjtPQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 6mm
+ $4.99 shipping
/km-expand-mandrel-for/z7uwwFal9xD4LzZmMMfupw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 7mm
+ $4.99 shipping
/km-expand-mandrel-for/oTN6932w8xw2JjtLbVvPcg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

Conetastic Cone Mandrel Set

$22.49
GoodyBeads Conetastic Cone Mandrel Set
+ $3.99 shipping
/conetastic-cone-mandrel/pHO9CKxYqwyQMF-yzAwdDA==/info
GoodyBeads
IN_STOCK ( In stock )
Store not rated
Conetastic Cone Mandrel Set. This tool is used to create custom bead cones and bead caps for strung designs, earrings, and more! The different sizes of cone mandrels fit into the base of the tool for easy storage. To use, simply insert your desired mandrel into the base and tighten into place with the included Allen wrench. Place your wire into the insertion hole in the mandrel, hold it in place with your thumb, then gently twist the mandrel until the wire spiral reaches the top.
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 8mm
+ $4.99 shipping
/km-expand-mandrel-for/qxgW2LeOZE4Bw_0jj6tyxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

Norton 66261009851 Mandrel...

$23.09
Zoro Norton 66261009851 Mandrel Assembly, 21/2 In. L X 1/4 In.
+ $5.00 shipping
/norton-66261009851/pxj8g3nugMPUnELG0Sflfg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mandrel Assembly, Shank Dia. 1/4 In., Pilot Dia. 1/4 In., Pilot Length 21/2 In., Fits Hole 3/8 In., Thread Size 1/420 In., For Use With Unified Wheels
More

Sinclair Neck Turning Mandrel...

$9.99
Brownells Sinclair Neck Turning Mandrel - Sinclair Neck Turning Mandrel, 6.5 Mm
+ $7.95 shipping
/sinclair-neck-turning/PONZ4R45GWRcbYyXquoXaA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
More

Dremel EZ407SA-01 EZ Drum...

$6.63
Walmart.com Dremel EZ407SA-01 EZ Drum Mandrel
+ $4.97 shipping
/dremel-ez407sa01-ez-drum/z5GI1N467tDJYAEOwynRGg==/info
Walmart.com
IN_STOCK ( In stock )
The Dremel EZ Drum mandrel makes sanding band changes easy as pull, place and secure. The 1-piece mandrel design simplifies the process of changing sanding bands and makes it easy to sand flat surfaces and edges.
More

3M 933 Mandrel

$6.54
Zoro 3M 933 Mandrel
+ $5.00 shipping
/3m-933-mandrel/wx-Q-WzXmkrdQ_sfwXhPlQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mandrel, Shank Dia. (In.) 1/4, Length (In.) 2, Max. RPM 14,000, Washer O.D. (In.) 1, For Use With Unitized Wheels, Bench Motors, Grinders or Drills, High Strength Clean and Strip Discs
More

Threaded Mandrel Tool,...

$25.59
Zoro Threaded Mandrel Tool, Threaded Mandrel Type AM, Steel, Helicoil, 2288-04
+ $5.00 shipping
/threaded-mandrel-tool/Tn0YVkYCkFVhbHIHgI8kug==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Threaded Mandrel Tool, Threaded Mandrel, Steel, Thread Type UNC, Use With Internal Thread Size 440, For Use With For Use With Free Running and Screw Locking Inserts, General Purpose
More

2-Piece Mandrel Set Beading...

$6.99
GoodyBeads 2-Piece Mandrel Set Beading Wire Tool
+ $3.99 shipping
/2piece-mandrel-set/Ym7O5BJjN4JqpDD4mEyUaA==/info
GoodyBeads
IN_STOCK ( In stock )
Store not rated
2-piece mandrel set beading wire tool. This is a great tool for every bead because of its ability to create consistently sized loops, circles & coils in wire. Each mandrel offers a variety of sizes to choose from. What a unique way to incorporate wire into your designs! The sizes include 1.5, 2, 3, 4, and 5mm for the small mandrel and 6, 7, 8, 9, & 10mm for the large mandrel. Sold as one set (2 pieces per package).
More

Sinclair Neck Turning Mandrel...

$9.99
Brownells Sinclair Neck Turning Mandrel - Sinclair Neck Turning Mandrel, 22 Cal
+ $7.95 shipping
/sinclair-neck-turning/kas-znvUIfQVi9p3mNZ9zw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
More

Eastwood High Speed Mandrel...

$3.58
Eastwood.com Eastwood High Speed Mandrel For Abrasive Rolls 1/4x 6
+ $6.95 shipping
/eastwood-high-speed/UDvaiiDT7hUlwnAs6ZNDwg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
This high speed abrasive roll mandrel is 6 long with a 1/4 shank. The 1/8 diameter pilot is 1 long. For best results use this and all Abrasive Roll Mandrels with light side pressure to avoid bending. For a smoother cut & longer abrasive life use Grinders Grease (13119). We recommend the use of a dust mask like our Disposable Dust Masks (22055) pk of 20, Goggles (43090), and ear protection during all grinding operations.
More

Eastwood Mandrel 1/4 Inch...

$7.33
Eastwood.com Eastwood Mandrel 1/4 Inch Shank Wheel Arbor
+ $6.95 shipping
/eastwood-mandrel-14-inch/m04bIBK-ON15PnYY4hl5nA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Fits any wheel with a 1/2 arbor hole. Can be mounted in most drills and dies.
More

Mandrel Assembly, Norton,...

$8.07
Zoro Mandrel Assembly, Norton, 66261009850
+ $5.00 shipping
/mandrel-assembly-norton/-TRFp22LU2gzYdbhpIY40g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mandrel Assembly, Shank Dia. 1/4 In., Pilot Dia. 1/4 In., Pilot Length 31/8 In., Fits Hole 1/2 In., Thread Size 1/420 In., For Use With Unified Wheels
More

Lawn Tractor Mandrel Shaft...

$143.00
Sears Parts Direct Lawn Tractor Mandrel Shaft and Pulley - GY00039
Free Shipping
/lawn-tractor-mandrel/bLpq5s2JYZtdMDb-kOCplg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved mandrel shaft and pulley (part number GY00039) is for lawn tractors.Mandrel shaft and pulley GY00039 rotates the blade under the mower deck.Wear work gloves to protect your hands when installing this part.
More

Case Neck Gage W/ Indicator -...

$93.99
Brownells Case Neck Gage W/ Indicator - Redding Case Neck Gage W/ Indicator
+ $7.95 shipping
/case-neck-gage-w/xTZtZVa0mH6ZXf7tWAnQ_Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Redding Case Neck Gauge provides a quick and accurate way to sort cases by concentricity. Large dial indicator calibrated in increments of .001 allows you to accurately determine case neck uniformity, a requirement for precision reloading. Includes large 3/16 diameter mandrel and small 9/64 diameter mandrel for use with .060 flash holes. A separated pilot stop is required for each 30 caliber; comes with 22 caliber and 30 caliber pilot stops. Stops for other calibers available below. Each pilot stop is CNC machined stainless steel, slightly undercut for a snug fit in the case mouth and smooth accurate indicator readings. Mfg: Redding
More

100pcs 1/8 Inch Mandrel...

$7.95
Banggood 100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel
Free Shipping
/100pcs-18-inch-mandrel/CS2AIn-krU18kYyTeL6nkw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
10% OFF for More Dremel Accessories, Please Click Here. Description: 100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel Specification: Disc Diameter: Approx. 32mm/1.26 Disc Thickness: Approx. 0.9mm/0.035 Shank Diameter: Approx. 1/8 Shank Length: Approx. 37mm/1.47 Quantity: 100pcs Cut Off Wheel Disc + 1pcs Mandrel Features: The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Great for contractors and the home hobbyist. Fits Dremel Craftsman Chicago and more. Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials- including thin wood, plastics and ceramics. Cut bolts or screws or make slots in rusted or stripped bolts and screws. Please note: 1. The cut-off... Less
More

Eastwood Cleaning Wheel Kit 3...

$34.99
Eastwood.com Eastwood Cleaning Wheel Kit 3 Discs and Mandrel
+ $10.95 shipping
/eastwood-cleaning-wheel/QoH4GR5IMi6mA0ud9hYjuw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Extreme Cleaning Disc for Heavy-Duty Use - This aggressive cleaning disc works great for removing paint and corrosion from body panels. Use with the (13064) Mandrel in your electric or pneumatic drill spinning at up to 5000 rpm to quickly clean difficult to strip areas. Approximate 9/16 width fits well into channels. Fresh abrasive is constantly exposed in use. Leaves a finish similar to that of 50 grit abrasive paper.
More

Mandrel Assembly, Norton,...

$10.85
Zoro Mandrel Assembly, Norton, 66261009502
+ $5.00 shipping
/mandrel-assembly-norton/iee8iQpth8K59O3KhNAsDw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mandrel Assembly, Shank Dia. 1/4 In., Pilot Dia. 1/4 In., Pilot Length 21/2 In., Fits Hole 1/4 In., Thread Size 1/420 In., For Use With High Strength Discs
More

Lawn Tractor Mandrel Shaft...

$41.36
Sears Parts Direct Lawn Tractor Mandrel Shaft and Pulley - 01545000
+ $10.99 shipping
/lawn-tractor-mandrel/V6Pmp4YEWGVYnDv7aKDyKg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved mandrel shaft and pulley (part number 01545000) is for lawn tractors.Mandrel shaft and pulley 01545000 rotates the blade under the mower deck.Wear work gloves to protect your hands when installing this part.
More

Aluminum Stepped Ring Mandrel...

$39.99
Walmart.com Aluminum Stepped Ring Mandrel With End Mount - Measures Sizes 4-13
+ $2.00 shipping
/aluminum-stepped-ring/LPaHWTPL1lfR6wLpeecarw==/info
Walmart.com
IN_STOCK ( In stock )
This aluminum ring sizing mandrel include an end mount for tabletop use. The mandrel can be easily removed for convenience. Hammering directly on to the mandrel is not recommended as the aluminum may become dinged or dented. Create wire wrapped rings directly on the mandrel. Measurements: 12.5 inches long. Measures rings from size 4 to 13. Quantity: 1 ring mandrel with end mount
More

Mandrel, 2-56,Steel,...

$33.92
Zoro Mandrel, 2-56,Steel, Helicoil, 8051-02
+ $5.00 shipping
/mandrel-256steel/_EFWO_ewKNxvkXhphv4HXA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mandrel, Steel, Thread Type UNC, For Use With G3613601, HeliCoil Power Installation
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335