miller tig welder

TIG Welder, DC, Phase 1, Output Range 5-150 Amps, Rated Output 150 A at 16 V, Input 28-22 Amps, Input Voltage 120-230, OCV 90 or 12-16, 50/60 Hz, Includes Power Source With 10 Ft Mvp Power Cord, Electrode Holder With 13 Ft Of Weld Cable, 10 Ft Work Cable With Clamp And Connectors, Shoulder Strap And Flow Thru Tig Torch Adapter.

Tig Welder, Dc, Phase 1, Output Range 5-150 Amps, Rated Output 150 A At 16 V, Input 28-22 Amps, Input Voltage 120-230, Ocv 90 Or 12-16, 50/60 Hz, Includes Power Source With 10 Ft Mvp Power Cord, Electrode Holder With 13 Ft Of Weld Cable, 10 Ft Work Cable With Clamp And Connectors, Shoulder Strap And Flow Thru Tig Torch Adapter.

TIG Welder, DC, Phase 1 or 3, Output Range 1-200 Amps, Rated Output 200 A at 18 V, Input 34-6 Amps, Input Voltage 120-460, OCV 75 or 9-14, 50/60 Hz, Includes Power Source, 10 Ft. Power Cord, 2 Dinse Connectors, 2 Wheel Trolly Cart 300480, Coolmate 1 115v 300360, 1 Gallon Of Coolant 043810.plus Remote Finger Tip Control 043688, Wp20 25 Ft Water Cooled Torch With Accessories, Regulator Flowmeter With Gas Hose, Torch Adapter, And Weld Lead With Clamp. TIG/Stick Welding PackagesMaxstar 200Allow for any input voltage hookup. HF arc starter. All units include power source, 10-ft. power cord, 2 Dinse connectors, 2-wheel trolley cart, 115V Coolmate , and 1 gal. coolant. 5GWH8 and 5GWH9 also include 25-ft. water-cooled torch with accessories, regulator flowmeter with gas hose, torch adapter, and... Less

Tig Welder, Dc, Phase 1 Or 3, Output Range 1-200 Amps, Rated Output 200 A At 18 V, Input 34-6 Amps, Input Voltage 120-460, Ocv 75 Or 9-14, 50/60 Hz, Includes Power Source, Adjustable Shoulder Strap, 10 Ft (3 M) Primary Power Cord, (2) International Dinse Connectors, And (1) Air Cooled Tig Torch Adapter

- Easy low amp 5 amp start DC, 20 amp AC. - Compact inverter design makes it one of the lightest and smallest AC/DC IGBT based inverter welders in its class. (Compare to Miller Diversion series.) - Simple, yet fully functional controls allow any user to make high quality welds. - Smooth stable arc in DC or AC with excellent wet in. - Automatic pre-flow and post-flow greatly simplify setup and operation. - Digital readout for precise control of welding amps in 2T mode. - 2T Function with the torch switch or the optional Foot pedal gives operator choices in out of position welding situations. - DINSE 25/50 style connectors allow easy adaptation of aftermarket torches and quick setup. -For portable use: Requires a Generator designated as Clean Power and capable of a MINIMUM 5000 W of... Less

Eastwood TIG 200 Welder... industrial TIG features at a DIY priceEastwood- engineered 200-amp TIG Welder offers affordable, professional- quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 3/16 thick.Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit1/4-thick welding capacityHigh- frequency start for precise arc controlSquare- wave inverter for accurate aluminum weldingWP-17-type torch accepts common cups and collets, up to 1/8 electrodesDuty cycle 45 at 150 ampsGet this TIG 200 Welder PLUS our Plasma Cutter and SAVE BIGClick here to see our money-saving TIG200 Welder and Versa Cut Plasma Cutter Kit200-amp TIG Welder welds steel aluminum up to 3/16 on 110v or 220v Eastwood TIG200 200AMP... Less

Tig Welder, Ac/dc, Phase 1 Or 3, Output Range 5-700 Amps, Rated Output 600 A At 44 V, 600 A At 44 V Amps Ac, Input 97-35 Amps, Input Voltage 230-575, Ocv 75 Or 10-15, 50/60 Hz, Includes Power Source, 2 Thread Lock Adapters 225029, 1 Water Cooled Torch Adapter 225028, Set-up Dvd. Runner Cart, Coolmate 3.5, And Rfcs-14hd Foot Control, Plus 4 Gallons Of Coolant, 25 Ft. Wp18sc Water Cooled Torch With Accessories, Regulator Flowmeter With Gas Hose, Torch Adapter,and Weld Lead With Clamp

TIG/Stick Welder, Phase 1, Output Range 3-310 Amps, Rated Output 200 A @ 28 VAC 60% Duty Cycle, 250 A @ 30 VAC 40% Duty Cycle, 3-310 Amps AC, Input 110/96/48 Amps, Input Voltage 200/230/460/575, OCV 80, 60 Hz, Includes Power Source, 2 Dinse 50 Mm Connectors, Running Gear, Water Cooler, Coolant, Remote Foot Pedal, 25 Ft Water-Cooled Torch, Torch Accessory Kit With Tungsten, 15 Ft Work Lead With Clamp, 10 Ft Gas Hose, Regulator/Flowmet er and Cable Cover

Netwelder Miller CST 280 Stick/TIG Welder - 907244011 Process Stick (SMAW) TIG (GTAW) Applications Industrial Applications Power Plant Construction Petrochemical Construction Maintenance and Repair Shipbuilding Specifications Input Power Requires 3- or 1-Phase Power Rated Output 3 ph: 280A @ 31.2V, 35% duty cycle 3 ph: 200A @ 28V, 100% duty cycle 1 ph: 200A @ 28V, 50% duty cycle 1 ph: 150A @ 26V, 100% duty cycle Welding Amperage Range 5- 200 Amps- 1 phase 5- 280 Amps- 3 phase Net Weight 41 lb (

Tig Welder, Ac/dc, Phase 1 Or 3, Output Range 1-200 Amps, Rated Output 150 A At 26 V, 150 A At 26 V Amps Ac, Input 31-10 Amps, Input Voltage 120-460, Ocv 80 Or 12-16, 50/60 Hz, Includes Power Source, 10 Ft. Power Cord, 2 Dinse Connectors, 2 Wheel Trolly Cart 300480, Coolmate 1 115v 300360, 1 Gallon Of Coolant 043810.

Tig Welder, Ac/dc, Phase 1, Output Range 3-310 Amps, Rated Output 200 A At 28 V 250 A At 30 V, 200 A At 28 V 250 A At 30 V Amps Ac, Input 110/96/48 Amps, Input Voltage 200/230/460, Ocv 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, No. 37 Running Gear And Dinse Connectors.

Tig Welder, Ac/dc, Phase 1, Output Range 3-400 Amps, Rated Output 300 A At 32 V 350 A At 34 V, 300 A At 32 V 350 A At 34 V Amps Ac, Input 146/128/65 Amps, Input Voltage 200/230/460, Ocv 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, No. 37 Running Gear And Dinse Connectors.

Weld steel and stainless steel up to 3/16 inch thick*Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.110 or 220 volt50 to 60Hz200 amp output DC TIG welder. *Please note This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.Tackle precision fabrication tasks in your garage. weld steel and stainless steel up to 3/16 inch110... Less

DC TIG/Stick Welder, Maxstar 150 STL, Phase 1, Output Range (Amps) 5 to 150, Rated Output 150A @ 16V, 150 Amps AC, 30 Percent, Input (Amps) 26.4/21.6, Input Voltage 115/230, OCV 90, 50/60 Hz, 9, 5-1/2, 13-1/4, TIG Arc Starting Without the Use of High Frequency, Gas Valve and Remote Control for DC TIG Welding, Portable, Lightweight, Multi-Voltage Plug Allows Connection to 115 or 230 V Receptacle Without Tools, DC TIG and Stick Welding Maintenace and Repair

Tig Welder, Dc, Phase 1 Or 3, Output Range 3-350 Amps, Rated Output 300 A At 32 V, Input 41-15 Amps, Input Voltage 230-575, Ocv 75 Or 10-15, 50/60 Hz, Includes Power Source, 8 Ft Power Cord, 2 Dinse Connectors, Set-up Dvd, Runner Cart, Coolmate 3.5, And Rfcs-14hd Foot Control.

Tig Welder, Dc, Phase 1 Or 3, Output Range 10-400 Amps, Rated Output 400 A At 44 V, Input 54-31 Amps, Input Voltage 230-460, Ocv 90, 60 Hz, Includes Dc Inverter, Dual Wire Feeder, Running Gear, 2 Guns And Cables

TIG Welder, DC, Phase 1 or 3, Output Range 1-200 Amps, Rated Output 200 A at 18 V, Input 34-6 Amps, Input Voltage 120-460, OCV 75 or 9-14, 50/60 Hz, Includes Power Source, Adjustable Shoulder Strap, 10 Ft (3 M) Primary Power Cord, (2) International Dinse Connectors, And (1) Air Cooled Tig Torch Adapter TIG/Stick WeldersMaxstar 200Feature programmable HF start parameters, low OCV Stick , HF arc starting, and Lift-Arc starting. Inverter-based DC power source. DX series model includes pulse frequency, pulse On/Off, peak % time, background amperage, initial amperage, initial slope time, final slope time, and final amperage control. LX series model includes an automation integrator that quickly interfaces to output disable, weld Start/Stop, gas Start/Stop inputs; valid arc, pulse lockout, and... Less

Tig Welder, Ac/dc, Phase 1, Output Range 3-400 Amps, Rated Output 300 A At 32 V, 350 A At 34 V, 300 A At 32 V, 350 A At 34 V Amps Ac, Input 128/65/50 Amps, Input Voltage 230/460/575, Ocv 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, No. 37 Running Gear And Dinse Connectors.

Miller Multimatic 200   Mig  Tig and Stick Welder  pkg.  951 4745%-15%n Rebate from Miller  3/1/2013- 5/31/2013

TIG Welder, AC/DC, Phase 1, Output Range 3-400 Amps, Rated Output 300 A at 32 V 350 A at 34 V, 300 A at 32 V 350 A at 34 V Amps AC, Input 146/128/65 Amps, Input Voltage 200/230/460, OCV 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, 37 Running Gear And Dinse Connectors. TIG/Stick Welding Packages250 DX and 350 LX SeriesFeature AC balance control, HF arc and LIft-Arc starting, dual digital display meters, and cooling system. Each includes water cooler, running gear, and Dinse connectors. 2CAV6 adds 4 gal. coolant, remote foot control, 25-ft. water-cooled torch adapter, 250A water-cooled Weldcraft torch, work clamp, 12-ft. gas hose, regulator/flowmet er, cable cover, and torch accessory kit. 2RVC8 adds power source, coolant, remote foot pedal,... Less

Wire Feed Welders, MIG/STICK/DC TIG Capable With MVP, Multimatic, Input Voltage 120V or 230V, Input (Amps) 20A, Output Range (Amps) 200A, OCV 90V, 50/60 Hz, Duty Cycle MIG -20 Percent or STICK/TIG - 30 Percent, single Phase, Rated Output MIG 150A at 21.5V at 20 Percent, STICK 150A at 26V at 30 Percent, TIG 150A at 16V at 30 Percent, Wire Size (In.) .023, .030, .035, Overall Height (In.) 14.5in, Overall Width (In.) 9.75, Overall Depth (In.) 14.5

Tig Welder, Dc, Phase 1 Or 3, Output Range 5-700 Amps, Rated Output 600 A At 44 V, Input 106-38 Amps, Input Voltage 230-575, Ocv 75 Or 10-15, 50/60 Hz, Includes Power Source, 2 Thread Lock Adapters 225029, 1 Water Cooled Torch Adapter 225028, Set-up Dvd.

TIG Welder, AC/DC, Phase 1, Output Range 3-310 Amps, Rated Output 200 A at 28 V 250 A at 30 V, 200 A at 28 V 250 A at 30 V Amps AC, Input 110/96/48 Amps, Input Voltage 200/230/460, OCV 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, 37 Running Gear And Dinse Connectors. TIG/Stick Welding Packages250 DX and 350 LX SeriesFeature AC balance control, HF arc and LIft-Arc starting, dual digital display meters, and cooling system. Each includes water cooler, running gear, and Dinse connectors. 2CAV6 adds 4 gal. coolant, remote foot control, 25-ft. water-cooled torch adapter, 250A water-cooled Weldcraft torch, work clamp, 12-ft. gas hose, regulator/flowmet er, cable cover, and torch accessory kit. 2RVC8 adds power source, coolant, remote foot pedal,... Less

MILLER TIG WELDER COOLANT PART # 043810 CASE OF 4 LOW CONDUCTIVITY ANTIFREEZE/ COOLANT Sold in 1-gallon plastic bottles. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°C). Also contains a compound that resists algae growth. B R WELDER REPAIR SERVICE INC. 4412 SOUTHERN BUSINESS PARK DRIVE WHITE PLAINS, MD 20695 800-783-3073 FAX 301-934-3057 Hours : Mon-Fri 8-5 Sat 9-12 EST Email questions to : brweld