Category

Craft Supplies
Showing results for "metal stamp punch leaf"
Results 1 - 40 of 1500+

Leaf Design Metal Steel Stamp...

$7.12
eBay Leaf Design Metal Steel Stamp Punch Pmc Clay Marking Tool 20
Free Shipping
/leaf-design-metal-steel/fZ_yCnxbBbGKjq0NBc6Lxg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Stamp punch, tempered chrome vanadium steel, average stamp size is about 1/4 inch, or approximately 5-6mm's Tool length 2-3/4x3/8 inches Customize jewelry design by using a tempered chrome vanadium steel stamp punch. Can be used to stamp metal, polymer clay, Art Clay, plastics and many other materials. Stamp is tempered to 51-55 HRC rockwell hardness. Stamp tool measures 3/8 inch wide, or 10mm with a square shank for an easy grip.Check out my store for more craft and jewelry tools and supplies!
More

Leaf Punch For Stamping Metal...

$9.99
Walmart.com Leaf Punch For Stamping Metal 1/4 Inch 6mm (1)
+ $2.00 shipping
/leaf-punch-for-stamping/Hmgdr_auzpMNqRmf2BW5Zw==/info
Walmart.com
IN_STOCK ( In stock )
Stamp any flat, soft metal. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 6mm (1/4 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 6mm (1/4 Inch). Quantity: 1 stamp in one pattern.
More

Impressart Metal Stamp 6mm...

$8.00
eBay Impressart Metal Stamp 6mm Leaf Swirl Stamping Punch Leather Design
+ $4.40 shipping
/impressart-metal-stamp/PEabKjvRi5MtwB2aN322_g==/info
eBay
IN_STOCK ( In stock )
ImpressArt Leaf Swirl 6mm Metal Design Stamp. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are precision-cut from carbon tool steel, hardened to last project after project. The stamp has an oil-free finish to protect against rust, and the side of the stamp is labeled with the design for easy identification. Impression Size: 6 mm
More

Leaf Swirl Metal Design Stamp...

$8.00
eBay Leaf Swirl Metal Design Stamp By Impressart Metal Jewelry Punch For Blanks
Free Shipping
/leaf-swirl-metal-design/E_Ik3AfrsE67OifiR-GGdg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are precision-cut from carbon tool steel, hardened to last project after project. The stamp has an oil-free finish to protect against rust, and the side of the stamp is labeled with the design for easy identification. Leaf Swirl- Impression Size: 6 mm Contact me about discounts when buying lower and uppercase sets as well as design stamps. I can build a custom order for you with grea
More

Ginkgo Palm Leaf Design Punch...

$15.49
Sears Marketplace Ginkgo Palm Leaf Design Punch For Stamping Metal Large 10mm 2/5 Inch (1)
No Shipping Info
/ginkgo-palm-leaf-design/UnScYIQa0PDcaFh3rY6_OA==/info
Sears Marketplace
IN_STOCK ( In stock )
Ginkgo Palm Leaf Design Punch For Stamping Metal Large 10mm 2/5 Inch (1)
More

Contemporary Feather Leaf...

$9.99
Walmart.com Contemporary Feather Leaf Punch For Stamping Metal 3/16 Inch 5mm (1)
+ $2.00 shipping
/contemporary-feather-leaf/IAtYgu5nbZDJti-UD6IhNA==/info
Walmart.com
IN_STOCK ( In stock )
Stamp any flat, soft metal. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 5mm (3/16 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 5mm (3/16 Inch) with 3mm width. Quantity: 1 stamp in one pattern.
More

3pc Nature Design Metal Punch...

$15.95
eBay 3pc Nature Design Metal Punch Stamps Metalsmith Leatherwork Flower Leaf Cloud
Free Shipping
/3pc-nature-design-metal/C-ANde8k2xe0jfm2iYQsBA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Hard to Find Items at Great Prices 3 Piece Nature Design Metal Stamping Punch Customize Any Metal Blank. 3 Stamps. Stamp any flat, soft metal. 3 stamps included each with a different Nature design. You will receive a Flower, Leaf, and Cloud design Use this punch set to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more)Each stamp design measures 3/16 Inch (5mm)Made of tempered steel for years of service Can be used with a metal
More

Leaf Right Impressart Metal...

$8.00
eBay Leaf Right Impressart Metal Design Stamp- Steel Hand Punch, Jewelry, Crafts
Free Shipping
/leaf-right-impressart/OxYcsrRz1G8dZKsHzVDRog==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Sign Up For Newsletter Add to Favorite Ebay Stores Store Home in titles descriptions Metal Stamps Tools | Metal Stamping Blanks | Cold Connections | Bezels | Resin Closeouts Specials | Hobby Tools Hand Tools | Polishing Abrasives | Drill Accessories | Rotary Tool Accessories Leaf Right ImpressArt Metal Design Stamp Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard fo
More

Impressart Metal Stamp 6mm...

$8.00
eBay Impressart Metal Stamp 6mm Vine Leaf Leaves Stamping Punch Leather Design
+ $4.40 shipping
/impressart-metal-stamp/MgFrqpzGr3lAMExuA7YQUg==/info
eBay
IN_STOCK ( In stock )
ImpressArt Vine 6mm Metal Design Stamp. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are precision-cut from carbon tool steel, hardened to last project after project. The stamp has an oil-free finish to protect against rust, and the side of the stamp is labeled with the design for easy identification. Impression Size: 6 mm
More

Stylized Leaf Flame Outline...

$6.99
Walmart.com Stylized Leaf Flame Outline Punch For Stamping Metal 3/16 Inch 5mm (1)
+ $2.00 shipping
/stylized-leaf-flame/GiTeRQauKC6I27vrVk_dnw==/info
Walmart.com
IN_STOCK ( In stock )
Stamp any flat, soft metal. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 5mm (3/16 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 5mm (3/16 Inch) with 3mm width. Quantity: 1 stamp in one pattern.
More

Leaf Left Impressart Metal...

$8.00
eBay Leaf Left Impressart Metal Design Stamp- Steel Hand Punch, Jewelry, Crafts
Free Shipping
/leaf-left-impressart/TQ32kmXpqVPTXZvgN4BhRA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Sign Up For Newsletter Add to Favorite Ebay Stores Store Home in titles descriptions Metal Stamps Tools | Metal Stamping Blanks | Cold Connections | Bezels | Resin Closeouts Specials | Hobby Tools Hand Tools | Polishing Abrasives | Drill Accessories | Rotary Tool Accessories Leaf Left ImpressArt Metal Design Stamp Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard for
More

Metal Design Stamp By...

$9.99
eBay Metal Design Stamp By Impressart 6mm Leaf Left
Free Shipping
/metal-design-stamp-by/4WmdMLCgHax0I1LdkXndlA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Click Here. Double your traffic. Get Vendio Gallery - Now FREE! Metal Design Stamp By Impressart 6mm Leaf Left These decorative stamps are made of hardened tool steel for decorating all types of items. The figures add value and interest to silver, brass and other metals. They give an artistic effect, and they enable you to give pieces a personal touch. These punches have The shank is approximately 9.5mm in diameter Approximately 2-3/8 long The impression is approximately 6mm To make your stamp
More

Leaf Swirl Impressart Metal...

$8.00
eBay Leaf Swirl Impressart Metal Design Stamp- Steel Hand Punch, Jewelry, Crafts
Free Shipping
/leaf-swirl-impressart/VWZXwNdMz0W-HfM52qslFg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Sign Up For Newsletter Add to Favorite Ebay Stores Store Home in titles descriptions Metal Stamps Tools | Metal Stamping Blanks | Cold Connections | Bezels | Resin Closeouts Specials | Hobby Tools Hand Tools | Polishing Abrasives | Drill Accessories | Rotary Tool Accessories Leaf Swirl ImpressArt Metal Design Stamp Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard fo
More

Jewelers Or Metal Worker...

$9.99
eBay Jewelers Or Metal Worker Design Stamp Modern Leaf 117
Free Shipping
/jewelers-or-metal-worker/zumOIZx4JvurC29eev_8jA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Click Here. Double your traffic. Get Vendio Gallery - Now FREE! JEWELERS OR METAL WORKER DESIGN STAMP MODERN LEAF 117 These decorative stamps are made of hardened tool steel for decorating all types of items. The figures add value and interest to silver, brass and other metals. They give an artistic effect, and they enable you to give pieces a personal touch. These punches have round shanks that are approximately 3-1/4 long and approximately 6 mm in diameter. Each stamp impression measures app
More

Basic Leaf Punch Stamp For...

$6.39
Walmart.com Basic Leaf Punch Stamp For Blanks 1/5 Inch 5mm (1)
+ $2.00 shipping
/basic-leaf-punch-stamp/4OW-QgQXOTHesrRaOJkBiw==/info
Walmart.com
IN_STOCK ( In stock )
High quality metal punch for decorating flat, soft metal. Design is printed on the side of the punch, allowing you to quickly identify the correct punching position. The printed design will always be the bottom of the stamped design. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 5mm (1/5 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 5mm (1/5 Inch) with 4.5mm width. Quantity: 1 stamp... Less
More

Leaf Tree Metal Design Stamp...

$8.00
eBay Leaf Tree Metal Design Stamp By Impressart Metal Jewelry Punch For Jblanks
Free Shipping
/leaf-tree-metal-design/-1HpY68_SBzNgdw1w3wBMA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are precision-cut from carbon tool steel, hardened to last project after project. The stamp has an oil-free finish to protect against rust, and the side of the stamp is labeled with the design for easy identification. Leaf Tree - Impression Size: 6 mm Contact me about discounts when buying lower and uppercase sets as well as design stamps. I can build a custom order for you with grea
More

Ginkgo Palm Leaf Design Punch...

$15.49
Walmart.com Ginkgo Palm Leaf Design Punch For Stamping Metal Large 10mm 2/5 Inch (1)
+ $2.00 shipping
/ginkgo-palm-leaf-design/-XiEbZu-9mL0hPWRf0QpOw==/info
Walmart.com
IN_STOCK ( In stock )
More

Caladium Leaf Impressart...

$8.00
eBay Caladium Leaf Impressart Metal Design Stamp- Steel Hand Punch, Jewelry, Crafts
Free Shipping
/caladium-leaf-impressart/5w39d_NYGkUrcW9AKYBgiw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Sign Up For Newsletter Add to Favorite Ebay Stores Store Home in titles descriptions Metal Stamps Tools | Metal Stamping Blanks | Cold Connections | Bezels | Resin Closeouts Specials | Hobby Tools Hand Tools | Polishing Abrasives | Drill Accessories | Rotary Tool Accessories Caladium Leaf ImpressArt Metal Design Stamp Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard
More

Maple Leaf Punch Stamp For...

$8.99
Walmart.com Maple Leaf Punch Stamp For Blanks 1/5 Inch 5mm (1)
+ $2.00 shipping
/maple-leaf-punch-stamp/fhDIxb0s4G3QlEKQ2Y9_Vg==/info
Walmart.com
IN_STOCK ( In stock )
High quality metal punch for decorating flat, soft metal. Design is printed on the side of the punch, allowing you to quickly identify the correct punching position. The printed design will always be the bottom of the stamped design. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 5mm (1/5 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 5mm (1/5 Inch) with 4.5mm width. Quantity: 1 stamp... Less
More

ImpressArt Metal Punch Stamp...

$9.79
Walmart.com ImpressArt Metal Punch Stamp 'Right Leaf' 6mm (1/4 Inch) Design - 1 Piece
+ $2.00 shipping
/impressart-metal-punch/6cEJ5AERJmM8e407jp-6RQ==/info
Walmart.com
IN_STOCK ( In stock )
More

ImpressArt Metal Punch Stamp...

$9.79
Walmart.com ImpressArt Metal Punch Stamp 'Leaf Tree' 6mm (1/4 Inch) Design - 1 Piece
+ $2.00 shipping
/impressart-metal-punch/VoGXb2x9aY688ZFsiUOMvA==/info
Walmart.com
IN_STOCK ( In stock )
More

ImpressArt Metal Punch Stamp...

$9.79
Walmart.com ImpressArt Metal Punch Stamp 'Left Leaf' 6mm (1/4 Inch) Design - 1 Piece
+ $2.00 shipping
/impressart-metal-punch/uHa2UG_Me-J0jNNMKgwtAQ==/info
Walmart.com
IN_STOCK ( In stock )
More

ImpressArt Metal Punch Stamp...

$9.79
Walmart.com ImpressArt Metal Punch Stamp 'Leaf Swirl' 6mm (1/4 Inch) Design - 1 Piece
+ $2.00 shipping
/impressart-metal-punch/yG9heIfCgsWOYiSJQZgk9A==/info
Walmart.com
IN_STOCK ( In stock )
More

Lucky 4-Leaf Clover Punch For...

$9.99
Walmart.com Lucky 4-Leaf Clover Punch For Stamping Metal Blanks 1/4 Inch 6mm (1)
+ $2.00 shipping
/lucky-4leaf-clover-punch/4-uAoscEUefoHRBH1Uavmg==/info
Walmart.com
IN_STOCK ( In stock )
Stamp any flat, soft metal. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 6mm (1/4 Inch) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design height for this piece is approximately 6mm (1/4 Inch). Quantity: 1 stamp in one pattern.
More

Leaf Metal Stamp

$12.99
Artbeads.com Leaf Metal Stamp
Free Shipping
/leaf-metal-stamp/NBJ6xtlV0veUibGIdmGODA==/info
Artbeads.com
IN_STOCK ( In stock )
Free Shipping
Add a touch of nature to your metal and wire designs with this metal leaf stamp. This rounded metal stamp features a small leaf shape that you could embellish your metal working projects with. Use with our steel bench block and blank charms for best results. This stamp should be used with 18 gauge metal sheets or thinner, as well as base metal components and precious metals. Learn how to use metal stamps by reading our Handy Tip available in the Learning Center Resources.
More

Leaf Metal Design Stamp

$10.59
GoodyBeads Leaf Metal Design Stamp
Free Shipping
/leaf-metal-design-stamp/A6Cu9FM2E-8cR5Hs3hmCrg==/info
GoodyBeads
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leaf Metal Design Stamp. Design is approximately 4mm. This stamp is made of hardened steel for decorating all types of jewelry items including our metal stamping blanks. Can be used on Silver, copper, brass or other metals. Each stamp has a laser engraving of the design clearly marked on the shaft. Face the engraving towards yourself to get the image to be upright while stamping. Sold individually.
More

Beadsmith 3 Piece 'Nature'...

$14.99
Walmart.com Beadsmith 3 Piece 'Nature' Punch Set For Stamping Metal 3/16 Inch 5mm
+ $2.00 shipping
/beadsmith-3-piece/z01z0Rq45D19LqzIBCuNGg==/info
Walmart.com
IN_STOCK ( In stock )
Stamp any flat, soft metal. 3 stamps included each with a nature themed design. You will get a flower, leaf, and cloud design. Use this punch set to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 3/16 Inch (5mm) design. Made of tempered steel for years of service. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 3 in length. Design width for stamps is 5mm (3/16 Inch). Quantity: 3 stamps (each has a different design).
More

Elite Jumbo Design Leaf Metal...

$16.99
GoodyBeads Elite Jumbo Design Leaf Metal Stamp
Free Shipping
/elite-jumbo-design-leaf/2Z4sBnB9vOuZ5jsLuorvqQ==/info
GoodyBeads
IN_STOCK ( In stock )
Store not rated
Free Shipping
Elite Jumbo Design Leaf Metal Stamp. Design is approximately 10mm. This stamp is made of hardened steel for decorating all types of jewelry items including our metal stamping blanks. Can be used on Silver, copper, brass or other metals. Each stamp has a laser engraving of the design clearly marked on the shaft. Face the engraving towards yourself to get the image to be upright while stamping. Sold individually.
More

Bell Impress Art Punch Stamp...

$31.24
Sears Marketplace Bell Impress Art Punch Stamp for Metal 1/4 6mm (1)
No Shipping Info
/bell-impress-art-punch/OPQNlEUM0zIHKRDAHSPJDQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Metal Stamping Punch. BELL. Customize Any Metal Blank. 1 Tool. Stamp any flat, soft metal. Use this punch to personalize metal blanks (made from non-ferrous metals such as Sterling Silver, Copper, Vintaj Natural brass and more). 6mm (1/4 Inch) design. Made of tempered steel for years of service. Face IMPRESS ART logo toward you to ensure all of your design stamps come out right side up. Use with a metal bench block or anvil and a 16 ounce flat head hammer. Hold your blank in place on a bench block using simple masking tape. The masking tape can also act as a guide to assure your design is in the right spot. Measurements: Punch is 2 5/8 in length. Design height for this piece is approximately 6mm (1/4 Inch) with 4.5mm width. Quantity: 1 stamp in one pattern.
More

Maple Leaf Metal Stamp

$12.99
Artbeads.com Maple Leaf Metal Stamp
Free Shipping
/maple-leaf-metal-stamp/4dwCV8WasIdM9pWCZPYypA==/info
Artbeads.com
IN_STOCK ( In stock )
Free Shipping
Are you from Canada or Vermont? Do you just love the natural touch leaves add to your metal and wire work? This is just the stamp for you! Use with our steel bench block and blank charms for best results. For a Handy Tip on how to use these wonderful stamps, please click here.
More

Chapel Road 5 3/4 x 7 3/4...

$15.99
Quill.com Chapel Road 5 3/4 x 7 3/4 Background Cling Mounted Rubber Stamp; Leaf
+ $4.99 shipping
/chapel-road-5-34-x-7-34/VG2Q52Bsb6fCdWazp2eGTA==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Design: Leaf. Dimensions: 5 3/4 x 7 3/4
More

Silver Metal Leaf Use With...

$8.99
eBay Silver Metal Leaf Use With Your Rubber Stamps
+ $2.99 shipping
/silver-metal-leaf-use/O80UtOvAwNXfQXrzVN5bTA==/info
eBay
IN_STOCK ( In stock )
THIS IS FOR A PACK OF 6 SHEETS OF RED SILVER METAL LEAF 5.5 X 5.5THIS IS EXCELLENT FOR: SCRAPBOOKING, PAPER CRAFTS, HOME DECOR, CERAMICS, METAL, PLASTIC, WOOD, GLASS, DECOUPAGE, STENCILING AND PLASTER OF PARIS AND MUCH MORE.I HAVE MORE COLORS IN MY EBAY STORE. HOW YOU USE THIS IS: STAMP IMAGE WITH THE STAMP AND STICK AND HEAT THIS INK TO ACTIVATE. WHEN THE IMAGE FEELS TACKY TO TOUCH, APPLY THE METAL SHEET AND PRESS ONL. TAKE A BRUSH OR TISSUE AND REMOVE EXCESS FOIL, (KEEP THE EXCESS AND USE I
More

Fern Leaf Metal Stamp

$12.99
Artbeads.com Fern Leaf Metal Stamp
Free Shipping
/fern-leaf-metal-stamp/txiflW3GiQyziJMYCDZOmg==/info
Artbeads.com
IN_STOCK ( In stock )
Free Shipping
Embellish your metal and wire designs with this wonderful fern leaf metal stamp. Use with our steel bench block and blank charms for best results. For a Handy Tip on how to use these wonderful stamps, please click here.
More

Ribbon 6 Mm Design Stamp...

$10.35
eBay Ribbon 6 Mm Design Stamp Metal Punch Impression
Free Shipping
/ribbon-6-mm-design-stamp/Ua7n8gcEAnPE4xNRxaddnA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
6 MM DESIGN STAMP METAL PUNCH IMPRESSION PRODUCT FEATURE METAL : TOOL STEEL (HARDENED) ITEM : RIBBON - DESIGN STAMP PUNCH QUANTITY : 1 QUALITY : PROFESSIONAL STANDARD SIZE : 6MM IMPRESSION SAME DAY SHIPPING FREE SHIPPING IN US (FIRST CLASS MAIL)RETURN POLICY : Satisfaction is guaranteed. If you are not happy with your purchase, please return the item at your expense within 30 days of the shipment date for a refund of the purchase price. Please remember to protect your item for its return trip a
More

Flower & Leaf Paper Punch Use...

$21.99
eBay Flower & Leaf Paper Punch Use With Your Rubber Stamps
+ $5.99 shipping
/flower-leaf-paper-punch/iFcMhgFa1kb8zQobZWFboQ==/info
eBay
IN_STOCK ( In stock )
PLEASE READ THIS AD IN FULL BEFORE YOU BUY!!!!! THIS IS FOR: FLOWERS LEAVES PUNCH (PHOTO # 2 IS EXACTLY WHAT YOU GET!!! AND PHOTO 3 SHOWS THE PUNCH IN THE YELLOW)THIS IS THE FLOWERS IN THE CENTER OF THE CROSS THIS IS NOT FOR THE PUNCH I USED FOR THE FLOWERS IN THE CROSS. OR THE CROSS STAMP!!!USE MY SEARCH ENGINE TO FIND THE STAMP AND OTHER FLOWER PUNCH. JUST TYPE IN ONE OR TWO KEY WORDS AND THEY SHOULD COME UP. EXCELLENT CONDITION NEW CHECK OUT MY EBAY STORE : PAT 'S RUBBER STAMPS AND SCRAPBOOK
More

Cross 6 Mm Design Stamp Metal...

$10.35
eBay Cross 6 Mm Design Stamp Metal Punch Impression
Free Shipping
/cross-6-mm-design-stamp/j28kRuvUla_misWWb0Vrmg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
6 MM DESIGN STAMP METAL PUNCH IMPRESSION PRODUCT FEATURE METAL : TOOL STEEL (HARDENED) ITEM : CROSS - DESIGN STAMP PUNCH QUANTITY : 1 QUALITY : PROFESSIONAL STANDARD SIZE : 6MM IMPRESSION SAME DAY SHIPPING FREE SHIPPING IN US (FIRST CLASS MAIL)RETURN POLICY : Satisfaction is guaranteed. If you are not happy with your purchase, please return the item at your expense within 30 days of the shipment date for a refund of the purchase price. Please remember to protect your item for its return trip as
More

Impress Art Stamp Straight...

$10.34
Sears Marketplace Impress Art Stamp Straight Tape - For Metal Punches - Lines Up Letters Perfectly
No Shipping Info
/impress-art-stamp/ULwtFjG8cSG0zKQw-ub3EQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Product Information: Stamp Straight Tape allows precise accuracy when stamping letters on metal jewelry. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Now all of your stamps will line up perfectly. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped. Measurements: The tape is 1/2 wide. Quantity: 1 spool of Stamp Straight Tape If you have any complaint plz contact through email on sales@edealszone. com
More

Leaves Design Pack 5...

$36.00
eBay Leaves Design Pack 5 Different Leaf Design Stamps Lot Impressart Metal Jewelry
Free Shipping
/leaves-design-pack-5/inepr_Rc5TpVD-hE_DadHQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are precision-cut from carbon tool steel, hardened to last project after project. The stamp has an oil-free finish to protect against rust, and the side of the stamp is labeled with the design for easy identification. Leaf Right, 6mm Leaf Right Large, 9.5mm Left leaf, 6mm Leaf Left Large, 9.5mm Caladium, 6mm Contact me about discounts when buying lower and uppercase sets as well as d
More

Jewelry Metal Marking Stamp...

$7.95
eBay Jewelry Metal Marking Stamp 925 For Silver Metal Punch
Free Shipping
/jewelry-metal-marking/3hURy2elxAw9bd1i8YpocQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are buying a Jewelry metal marking stamp metal punch. It has 925 stamp for silver marking jewelry. The stamp is about 1mm = 3/64. It is 3-5/8 long and comes in a plastic case. Great for marking jewelry.
More

Jewelry Metal Marking Stamp...

$7.95
eBay Jewelry Metal Marking Stamp 14k For Gold Metal Punch
Free Shipping
/jewelry-metal-marking/7OZOv82-mKHhS-7I9sWqmg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are buying a Jewelry metal making stamp metal punch. It has 14k for gold marking jewelry. The stamp is 1mm = 3/64. It is about 3-5/8 long and comes in a plastic case. Great for marking jewelry.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623