Category

Sport and Outdoor
Showing results for "mauser muzzle break"
Results 1 - 40 of 1500+

Timney Triggers Mauser...

$50.59
Walmart.com Timney Triggers Mauser Sportsman Trigger SP, M95-6
Free Shipping
/timney-triggers-mauser/2l9sVeCmKXPG8-O4zc4RNw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Timney Triggers Mauser M95-6 fits most bolt-action rifles built on Mauser, Springfield or Enfield type actions. It is fully adjustable with a two to four pounds trigger pull weight. Light weight alloy housing. Machined and hardened steel working surfaces. Some stock inletting required.
More

Redding 3-Die Set 30 Mauser

$92.99
MidwayUSA Redding 3-Die Set 30 Mauser
+ $8.39 shipping
/redding-3die-set-30/okN0rwO-FSQBbvwSft2PSA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Lee Steel 3-Die Set 30 Mauser

$31.99
MidwayUSA Lee Steel 3-Die Set 30 Mauser
+ $7.59 shipping
/lee-steel-3die-set-30/78HzbWCdd657V8BngS6_Xw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp.
More

Redding 2-Die Set 9x57mm...

$92.99
MidwayUSA Redding 2-Die Set 9x57mm Mauser
+ $7.59 shipping
/redding-2die-set-9x57mm/bqdl1HazHoag7figzi6KeA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

RCBS 2-Die Set with Roll...

$61.99
MidwayUSA RCBS 2-Die Set with Roll Crimp 30 Mauser
+ $7.59 shipping
/rcbs-2die-set-with-roll/9wt96Ch4pX1CNtCvEI_wTw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding 2-Die Set 7x57mm...

$47.49
MidwayUSA Redding 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $8.39 shipping
/redding-2die-set-7x57mm/EESFLFjkMXjYInOpaptBBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding Body Die 6.5x55mm...

$31.29
MidwayUSA Redding Body Die 6.5x55mm Swedish Mauser
+ $4.99 shipping
/redding-body-die-65x55mm/XMFo6F61mlYYI5avTIzMYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced using precise manufacturing processes along with the highest quality components available. Body dies are designed to full length size the case body and bump the shoulder position for proper chambering
More

Timney Triggers Mauser...

$50.59
Walmart.com Timney Triggers Mauser Sportsman Trigger SP, M95-6
Free Shipping
/timney-triggers-mauser/2l9sVeCmKXPG8-O4zc4RNw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Timney Triggers Mauser M95-6 fits most bolt-action rifles built on Mauser, Springfield or Enfield type actions. It is fully adjustable with a two to four pounds trigger pull weight. Light weight alloy housing. Machined and hardened steel working surfaces. Some stock inletting required.
More

Redding Trim Die 7x57mm...

$31.29
MidwayUSA Redding Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/redding-trim-die-7x57mm/_s2VyQ5zM6v-aFRlidty1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Lyman 2-Die Set 8x57mm Mauser...

$37.99
MidwayUSA Lyman 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lyman-2die-set-8x57mm/gy3CfjAQcetsxfCjW3sSqQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Includes full length sizing die and bullet seating die with a roll crimp. 7/8-14 threads to fit all popular presses. Sizing die is vented to prevent trapped air that can damage cartridge cases. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included.
More

Lee Quick Trim Die 7x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-quick-trim-die-7x57mm/iRJH_YVie_u3lCRgkCYxcQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Redding 2-Die Set 8x57mm...

$47.49
MidwayUSA Redding 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/redding-2die-set-8x57mm/kKbVthKSGPQKgA7YpkZofg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Net Relief Muzzle Net Black...

$69.99
Dover Saddlery Net Relief Muzzle Net Black Oversize
+ $12.95 shipping
/net-relief-muzzle-net/_NrWpeRHykiVoDCs4LM9-A==/info
Dover Saddlery
IN_STOCK ( In stock )
Net Relief Muzzle Net includes noseband, three mesh nets and instructions. Helps stop head shaking. A great solution for horses with allergies. Imported.
More

RCBS 2-Die Set 8x57mm Mauser...

$35.49
MidwayUSA RCBS 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-8x57mm/HeTLo5WxQ4AEkA1DcsAwKA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Competition 2-Die Set...

$104.99
MidwayUSA RCBS Competition 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-competition-2die/X-MHrTbD9iJPTZocqqwBeg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Competition Dies are perfect for the reloader wanting reloads with tight tolerances and extreme precision. They feature a full-length sizer with raised expander ball for smooth, effortless neck expansion and maximum concentricity between die neck and body. The seater die features a micrometer adjustment for super accurate bullet seating depth in increments of 0.001. Bullets are inserted through a side window in the die, and the special bullet guide ensures correct bullet alignment. Black oxide finished steel Technical Information Notes: Not for use with progressive presses Lifetime Guarantee from RCBS Comes with a plastic storage case
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/hornady-custom-grade-new/dRXMufPjLBbGvnEyuC6mEg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Redding Trim Die 8x57mm (8mm...

$31.29
MidwayUSA Redding Trim Die 8x57mm (8mm Mauser)
+ $4.99 shipping
/redding-trim-die-8x57mm/raI_pt-ZkXu-1H7sUPVLOA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

RCBS 2-Die Set 9.3x62mm Mauser

$35.49
MidwayUSA RCBS 2-Die Set 9.3x62mm Mauser
+ $7.59 shipping
/rcbs-2die-set-93x62mm/uGxWuC8tkG3sgD0352sO_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lee Quick Trim Die 6.5x55mm...

$9.99
MidwayUSA Lee Quick Trim Die 6.5x55mm Swedish Mauser
+ $4.99 shipping
/lee-quick-trim-die/0FR6XHEzTBJWA29GpKavZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Redding Deluxe 3-Die Set...

$79.99
MidwayUSA Redding Deluxe 3-Die Set 8x57mm Mauser (8mm Mauser)
+ $8.39 shipping
/redding-deluxe-3die-set/5TjmTJD6RECYXLYIhJDvbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

The Mauser Bolt Actions - A...

$34.99
Brownells The Mauser Bolt Actions - A Shop Manual - Kuhnhausen- Mauser M91-M98 Bolt Actions Shop Manual
+ $7.95 shipping
/the-mauser-bolt-actions/1eWTp9SyzCkoVpFr93TdNQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
224 pages. 6 x 9. Softbound. Covers all types and variations of Mauser bolt actions M91 thru M98. Step-by-step, easy-to-understand instructions, hundreds of clear photos, illustrations and charts give proven, detailed information for making all types of repairs including sight work, headspace, action work, rebarreling, chambering, custom work and match-grade trigger modifications. Text includes model and parts identification, function and safety checks, correct disassembly/reass embly procedure and complete list of recommended tools and supplies. Mfg: Heritage Gun Books
More

RCBS Seater Die 7x57mm Mauser...

$25.99
MidwayUSA RCBS Seater Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/rcbs-seater-die-7x57mm/5xl25Gp3SCy9mdyI_cKOLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body.
More

RCBS 2-Die Set 7x57mm Mauser...

$35.49
MidwayUSA RCBS 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-7x57mm/60XGaqAcS2ptfHzF4XQxrA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding 2-Die Set 6.5x55mm...

$47.49
MidwayUSA Redding 2-Die Set 6.5x55mm Swedish Mauser
+ $7.59 shipping
/redding-2die-set/7dn9bCGgJac-rwJAnuAiVQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee Factory Crimp Die 8x57mm...

$13.99
MidwayUSA Lee Factory Crimp Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/lee-factory-crimp-die/EfolACx1A3JpI_75fSh_wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS X-Die 2-Die Set 8x57mm...

$50.99
MidwayUSA RCBS X-Die 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-xdie-2die-set/UUvzmeCK2rRKP3CygCimuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

Lee RGB 2-Die Set 8x57mm...

$19.99
MidwayUSA Lee RGB 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/lee-rgb-2die-set-8x57mm/jutmLvewUEb-2M-i3uys7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a great set of utility dies at a great price! RGB stands for Really Great Buy, These dies may be inexpensive but that does not mean that these dies are not manufactured to the strictest tolerance. These dies are made to have tolerances that are 50% closer than the advertised amount of a very popular and expensive brand. Full length sizer die, bullet seating die, and storage box included. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Easy Adjust Dead Length Bullet Seating Die Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shellholder, powder dipper or load data.
More

Lee Factory Crimp Die...

$13.99
MidwayUSA Lee Factory Crimp Die 9.3x62mm Mauser
+ $4.99 shipping
/lee-factory-crimp-die/mf0eBnq28e2stLU08LKk-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Quick Trim Die 8x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 8x57mm Mauser
+ $4.99 shipping
/lee-quick-trim-die-8x57mm/pWM7faVfBY-c-5Zj6bk3KQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Redding Deluxe 3-Die Set...

$79.99
MidwayUSA Redding Deluxe 3-Die Set 7x57mm Mauser (7mm Mauser)
+ $8.39 shipping
/redding-deluxe-3die-set/waLKSTsfVJxn8w5MJhuxdA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

RCBS 2-Die Set 6.5x57mm Mauser

$61.99
MidwayUSA RCBS 2-Die Set 6.5x57mm Mauser
+ $7.59 shipping
/rcbs-2die-set-65x57mm/znNkGz0KS74ZJlymlnyb6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Best Friend Grazing Muzzle...

$42.99
Dover Saddlery Best Friend Grazing Muzzle Pony Size
+ $9.95 shipping
/best-friend-grazing/RSX1csJwumDyVX-YuMrWdw==/info
Dover Saddlery
IN_STOCK ( In stock )
The Best Friend Grazing Muzzle attaches directly to a leather or breakaway halter with its four adjustable hook-and-loop straps. Padded for your horse's comfort, it has a durable rubber bottom that helps control your horse's grass intake. This muzzle can also stop a horse from cribbing. Imported.
More

Grazing Muzzle Oversize

$41.99
Smith Brothers Grazing Muzzle Oversize
+ $9.95 shipping
/grazing-muzzle-oversize/e3pRe9yTkcKW4WdT-Z4zpA==/info
Smith Brothers
IN_STOCK ( In stock )
Store not rated
The Grazing Muzzle fastens easily to any leather or breakaway halter with four adjustable hook-and-loop straps. This muzzle is padded for your horse's comfort and features a durable rubber bottom that helps control grass intake. It also can stop a horse from cribbing. Imported.
More

RCBS Competition 2-Die Set...

$104.99
MidwayUSA RCBS Competition 2-Die Set 6.5x55mm Swedish Mauser
+ $7.59 shipping
/rcbs-competition-2die/19UuFCBrUnyX4NNKtKL0vA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Competition Dies are perfect for the reloader wanting reloads with tight tolerances and extreme precision. They feature a full-length sizer with raised expander ball for smooth, effortless neck expansion and maximum concentricity between die neck and body. The seater die features a micrometer adjustment for super accurate bullet seating depth in increments of 0.001. Bullets are inserted through a side window in the die, and the special bullet guide ensures correct bullet alignment. Black oxide finished steel Technical Information Notes: Not for use with progressive presses Requires the use of an extended shellholder (included) for bullet seating, a normal shellholder is still required for decapping brass Lifetime Guarantee from RCBS Comes with a plastic storage case
More

Redding Premium Series Deluxe...

$122.99
MidwayUSA Redding Premium Series Deluxe 3-Die Set 6.5x55mm Swedish Mauser
+ $8.39 shipping
/redding-premium-series/2F1G6xwQmB9gxj590V0uQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem3 die set Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these new offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity. The Micrometer... Less
More

Mauser 98 Cross Bolt Wrench -...

$26.99
Brownells Mauser 98 Cross Bolt Wrench - Cross Bolt Wrench
+ $7.95 shipping
/mauser-98-cross-bolt/KArmSkqJgfeGB7c7_mflpw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Correct pin spacing, O.D. and relieved center for fast removal of M-98 stock cross bolts. Replaceable pins. Mfg: Brownells SPECS: 4ΒΌ(10.8cm) long x 9/16 (14.3mm) diameter. Tool steel.
More

Redding 2-Die Set 7x57mm...

$103.99
MidwayUSA Redding 2-Die Set 7x57mm Mauser Ackley Improved 40-Degree Shoulder
+ $7.59 shipping
/redding-2die-set-7x57mm/8HTHi7nyx77BKShqinYzaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

RCBS 2-Die Set 6.5x55mm...

$35.49
MidwayUSA RCBS 2-Die Set 6.5x55mm Swedish Mauser
+ $7.59 shipping
/rcbs-2die-set-65x55mm/ldOg55heTJjCwwfKpGE-4w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lyman Neck Expander M Die...

$21.99
MidwayUSA Lyman Neck Expander M Die 9.3x62mm Mauser
+ $4.99 shipping
/lyman-neck-expander-m-die/sZVPPiPqzxajFVsZxsbytw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating.
More

Lyman Neck Sizer Die 6.5x55mm...

$29.99
MidwayUSA Lyman Neck Sizer Die 6.5x55mm Swedish Mauser
+ $4.99 shipping
/lyman-neck-sizer-die/5SokjTeM2k6lk7RHSr5ajw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to work only the neck with a decapping stem and expander button. Technical InformationMateri al: Steel Die Type: Neck Sizing Accessories: Plastic storage case included. Notes: A Sizing Die is used to 'squeeze' the enlarged case back to its proper size and usually also to deprime it.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335