Mauser 98 Trigger Sports and Outdoors - Shopping.com
Showing results for "mauser 98 trigger"
Results 1 - 40 of 477

Necg Mauser 98 Single Set...

$199.00
Brownells Necg Mauser 98 Single Set Adjustable Trigger - M98 Single Set Adjustable Trigger
+ $7.95 shipping
/necg-mauser-98-single-set/R3nnOg4sxjgzd-35A48zVA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Self-contained, dual-mode trigger module upgrades a Mauser 98 to a highly adjustable conventional trigger with a 2 to 4½ lb. pull weight or, when you press the shoe forward, to an ultra-light, clean-breaking 4 oz. set trigger. Pull weight, sear engagement, pre-travel, and overtravel are fully adjustable by turning Allen head screws and then locking the settings by tightening the brass locking screws. Wide, grooved, deeply curved trigger shoe gives excellent sensitivity and control. The entire trigger unit secures to the receiver with a steel bolt and nut for more stability than the original push pin. Gunsmith installation recommended. Mfg: Necg SPECS: Steel, blued. 3⁄8 wide shoe. 2 to 4 lb. pull weight with 4 oz. set trigger pull weight. Requires minor inletting of stock and triggerguard... Less
More

Superior Shooting Mauser 98...

$67.99
Brownells Superior Shooting Mauser 98 Speedlock Firing Pin Kit - Mauser 98 (Large Ring & Commercial)
+ $7.95 shipping
/superior-shooting-mauser/XMziIUo37f5kvmxn-XNcAQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Aluminum/steel or titanium firing pins weigh less than half of original factory firing pins, and the weight savings alone would decrease lock times dramatically. But, for even faster lock times and to help ensure positive ignition, the Tubb Firing Pins come with a factory weight chrome silicon spring. CS springs maintain load height and compression strength without taking a set for thousands of compression cycles. Faster lock time means there's less chance of gun movement between the time the trigger is pulled and the firing pin hits the primer. Tubb Firing Pins cut lock time without increasing vibrations AND maintain positive ignition. Designed by NRA Highpower Rifle and Highpower Si Mfg: Superior Shooting
More

Timney Featherweight Deluxe...

$107.99
Brownells Timney Featherweight Deluxe Triggers W/Safety - Fwd Fits Mauser Model 98k Gew Military
+ $7.95 shipping
/timney-featherweight/EYki7hFqd0ap9wJ_6GHLVg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight Deluxe (FWD) features the same adjustments and hand fitting as the Deluxe but includes trigger blocking and side safety. Mfg: Timney
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/redfield-1piece-standard/b8p7bnevoQbPyPf8JWMtJQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. DOES NOT fit the Remington 798. Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 ONLY Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser 98 Matte
Free Shipping
/leupold-2piece-standard/huZjkHDKiQ8att_VlNwIaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),2-Piece,Rear & Front Sets
More

Timney Sportsman Trigger -...

$58.99
Brownells Timney Sportsman Trigger - M98-K-Sp Trigger Fits Mauser 98k Gew Military
+ $7.95 shipping
/timney-sportsman-trigger/XY3UVP-NGdpwnHTjJIXdQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
CNC machining and advanced metallurgy provide a durable, reliable replacement trigger for stock military and sporterized Mauser, Springfield and Enfield rifles. Adjusts for pull weight, (2-4 lb.), creep and overtravel. Lock nuts hold settings. Excellent replacement for that heavy military trigger. No safety. Mfg: Timney SPECS: 6061 T6 aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250 (6.3mm) wide shoe. M91-4 has longer trigger shoe to fit un-modified military rifles. M98-K and M91-4K sets forward to fit short, 1.75, triggerguards. Fits stock,
More

B-Square Military...

$27.99
MidwayUSA B-Square Military Weaver-Style Scope Base with 1 Rings Mauser 98 Matte
+ $4.99 shipping
/bsquare-military/N2xdjXFiJ0cod_vAxvrrpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square Military bases are made of anodized aluminum with a durable blue finish. Mounts right over the top of the receiver so it cannot be used with open sights (except Springfield 1903, which is a see-through design). Comes with two 1 InterLock (Weaver-Style) rings. Technical InformationStyle: WeaverFits: German Mauser 98 (Large ring)Material: AluminumNotes:1 inch rings included.No gunsmithing required. Replaces rear sight leaf.Long eye relief (Scout style) which mounts forward of the action.Will not fit Brazilian or Czech Mausers. Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),Mounting Systems
More

Weaver 2-Piece Grand Slam...

$22.99
MidwayUSA Weaver 2-Piece Grand Slam Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/weaver-2piece-grand-slam/h_4yhd5xh9jsPBhc27MpCQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These all-steel bases from Weaver feature rear mount windage adjustments, a positive dovetail locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 Notes: Torx heads and driver included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),2-Piece,Rear & Front Sets
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/qMb1WTQ2uJuLkU9_dMq6uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These all-steel bases from Weaver feature rear mount windage adjustments, a positive dovetail locking system and provide the utmost in recoil resistance. DOES NOT fit the Remington 798.Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 Notes: Torx heads and driver included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Mauser 98 Large Ring, Remington 798 Matte
+ $4.99 shipping
/talley-2piece-scope-base/0lygPrvqjEYBN7-32DQa_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Mauser Large Ring Notes: Mounting hardware included. .175 high Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),2-Piece,Rear & Front Sets
More

Brownells Mauser 98 Bolt...

$49.99
Brownells Brownells Mauser 98 Bolt Shroud - Large Ring Mauser Bolt Shroud
+ $7.95 shipping
/brownells-mauser-98-bolt/Imtfox6uHK6pk-TNf9pgzw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Finish off that sporterized military Mauser by replacing the ugly, issue shroud with this streamlined, classy, commercial-style shroud. Greatly improves looks of the bolt and eliminates the awkward, over-the-top, military safety. Since the original safety is removed, you must INSTALL A TRIGGER WITH ITS OWN SAFETY (like the Timney). Mfg: Brownells SPECS: 2 (5.7cm) long, 1 (3.2cm) wide. 2 oz. (56.7g) Investment cast steel, beaded finish. Large Ring fits all M98's.
More

EGW 1-Piece Picatinny-Style...

$35.99
MidwayUSA EGW 1-Piece Picatinny-Style Base Mauser 98 Matte
+ $4.99 shipping
/egw-1piece/7jbUdVW7aacgBc3VvNE6ag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny/Weaver Fits: Commercial Mauser 98 Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Mauser 98 Gloss
Free Shipping
/leupold-1piece-standard/8x0rAqMG3iPNqhkHZ8paQw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

Timney Featherweight Triggers...

$85.99
Brownells Timney Featherweight Triggers - Fw Fits Mauser Model 98k Gew Military
+ $7.95 shipping
/timney-featherweight/CHaarxDUtnwjDXdSvsbfNQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight (FW) features the same adjustments and hand fitting as the Deluxe but no safety. Mfg: Timney
More

Dakota Mauser 98 Bolt Shroud...

$219.99
MidwayUSA Dakota Mauser 98 Bolt Shroud with 3 Position Safety Steel in the White
+ $4.99 shipping
/dakota-mauser-98-bolt/M8IMbEgZbRmnA1l8csrHZg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Fully machined shroud features a Model 70 Style 3-Position Safety that keeps all of the gas-deflecting advantages of the Mauser shroud. Steel in the white, this shroud requires gunsmith installation. Technical InformationNotes: Dakota parts are the same as used by Dakota Arms when building rifles. These parts are intended for use by qualified gunsmiths when making custom rifles. Parts will require fitting and finishing and may require machining, depending on the application. Searches for products like these typically include: Gun Parts,Gun Parts by Gun Make & Model,Mauser,Safet ies & Bolt Shrouds
More

Bell & Carlson Mauser 98...

$289.99
Brownells Bell & Carlson Mauser 98 Medalist Stock - Mauser 98
+ $15.95 shipping
/bell-carlson-mauser-98/xav-qypAaeBqPv80fpvwPg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Mfg: Bell & Carlson SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13 (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate.
More

EGW 1-Piece Picatinny-Style...

$35.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Mauser 98 Matte
+ $4.99 shipping
/egw-1piece/YQdXWOzCCFimnvJP4am5HA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Center spread between the two middle mounting holes is 3.825 center to center. Does not fit the 3000L.Technical InformationMateri al: 6061 T6 AluminumWeight: 3 oz.Style: Picatinny Height: .4Fits: Mauser 98Length: 6.676Notes: Mounting Hardware IncludedNot relieved for stripper clip guideThis mount is supposed to hang over in the front, extending slightly past the receiver Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

NECG Bolt Shroud with 3...

$269.99
MidwayUSA NECG Bolt Shroud with 3 Position Safety Mauser 98 Steel in the White
+ $4.99 shipping
/necg-bolt-shroud-with-3/fxLBzoYOQ8Q0S7pTuFvKbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A beautifully made Model 70 style bolt shroud for the 98 Mauser. The three position safety lever provides a positive and safe operation of the action. Offers a great custom upgrade to your favorite rifle. In the white. Technical InformationNotes: Gunsmith installation is required. Model 70-style side swing safety which allows for low scope mounting while retaining the original gas deflecting design. Positive detents for bolt lock, bolt open and fire positions. Uses the original firing pin, spring, shroud lock and cocking piece. Searches for products like these typically include: Gun Parts,Gun Parts by Gun Make & Model,Mauser,Safet ies & Bolt Shrouds
More

Brownells Picatinny Scope...

$76.99
Brownells Brownells Picatinny Scope Base - Mauser 98 Steel Base
+ $7.95 shipping
/brownells-picatinny-scope/5j8NOBj-dzEzqmqSsXQqqA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Brownells Picatinny Scope...

$39.99
Brownells Brownells Picatinny Scope Base - Mauser 98 Aluminum Base
+ $7.95 shipping
/brownells-picatinny-scope/EQT3SpergYupqqwHqaj2Wg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Timney Featherweight Deluxe...

$107.99
Brownells Timney Featherweight Deluxe Triggers W/Safety - Mauser 91-4k Featherweight Deluxe Trigger, 3 Lbs
+ $7.95 shipping
/timney-featherweight/c4YFy6CELZpnOs2csTA_RQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight Deluxe (FWD) features the same adjustments and hand fitting as the Deluxe but includes trigger blocking and side safety. Mfg: Timney
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings 98 Mauser Large Ring Matte Low
+ $4.99 shipping
/talley-lightweight/P5HkInDS0VLVEeU358cLIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Diameter: 1 Ring Height: .400 from bottom of ring opening to rifle receiver Fits: Large Ring Mauser 98 Notes: Mounting Hardware is included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),Mounting Systems
More

Minelli S.P.A. Mauser 98...

$229.99
Brownells Minelli S.P.A. Mauser 98 Walnut Stock Set - Gewehr K98 Walnut Stock Set
+ $7.95 shipping
/minelli-spa-mauser-98/fzSxB6n4dl7WK9WCqhzHfQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Italian manufactured military walnut stocks Faithful reproduction of original military stocks Built with great attention to detail, especially in the inletting Finished with an oil finish, replicating a traditional military stock finish Ready for fitment of metal hardware and installation, may require minor fitting K98 Mauser Stock Set includes front handguard Mfg: Minelli S.P.A. SPECS: Walnut, oil finish.
More

Oberndorf Receiver Tap...

$79.99
MidwayUSA Oberndorf Receiver Tap 1.100-12 Mauser 98 Large Ring
+ $4.99 shipping
/oberndorf-receiver-tap/z4cwhFfEN7BBKYyr21DZFA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Installing a new barrel can be a lot easier if the barrel threads are chased out in the receiver first. This is especially true for Mauser rifles because of the wide variance in production tolerances between manufacturers and countries of origin. If the receiver has been drilled and tapped with the barrel off, this tap will conveniently remove the burrs in the bottom of the threads. Threads are 1.100x 12 threads per inch at 60 degrees. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Barrel Vises, Action Wrenches & Receiver Tools
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser 95 Gloss
+ $4.99 shipping
/redfield-1piece-standard/8fbXB0vLAJ-JczbNrNHt5Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al: SteelStyle: StandardFits: Mauser 95; Kar and Swedish after 1906 and Small Ring 95, MexicanNotes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Smal l Ring Mauser,Mauser 96,1-Piece
More

Nightforce Standard Duty...

$57.00
Brownells Nightforce Standard Duty Scope Bases - Standard Duty Base Mauser 98 Large Ring Undrilled - 20 Moa
+ $7.95 shipping
/nightforce-standard-duty/-KXeWOtyDzHn7iMQoSlb3A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized. Mfg: Nightforce
More

PTG Bolt Lug Lapping Tool...

$47.99
MidwayUSA PTG Bolt Lug Lapping Tool Mauser 98 Large Ring
+ $4.99 shipping
/ptg-bolt-lug-lapping-tool/MTVDeTVUtzrkn1AZcwkGPA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bolt locking lugs cam and lock into corresponding lug recesses in the receiver as the bolt is closed. For the smoothest operation of the bolt and utmost accuracy, both lugs should be smooth and in full contact with the corresponding lug recesses. In factory production rifles and in surplus military rifles, this is the exception, rather than the rule. Before final headspacing, simply thread this tool into the receiver threads, apply lapping compound to the bolt lugs, then open and close the bolt to lap the lugs smooth and into perfect contact with the lug recesses. Technical InformationMateri al: Tool Steel Notes: Increases accuracy by allowing the user to lap the bolt lugs to insure that both lugs are bearing evenly on their recesses. Screws into receiver threads (barrel must be removed)... Less
More

Redfield 2-Piece Standard...

$22.99
MidwayUSA Redfield 2-Piece Standard Scope Base Mauser FN Gloss
+ $4.99 shipping
/redfield-2piece-standard/eZsj7qzJLS7FUoBP1_t4AQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationStyle: Standard Fits: Mauser FN Material: Steel Notes: Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),2-Piece,Rear & Front Sets
More

Timney Featherweight Deluxe...

$107.99
Brownells Timney Featherweight Deluxe Triggers W/Safety - Fwd Fits Fn Mauser With Safety
+ $7.95 shipping
/timney-featherweight/ZtF8b-4-jyfxeWqu5FzvSQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight Deluxe (FWD) features the same adjustments and hand fitting as the Deluxe but includes trigger blocking and side safety. Mfg: Timney
More

Mauser 98 Scope Mount

$45.99
Daniel Outdoors Mauser 98 Scope Mount
+ $5.99 shipping
/mauser-98-scope-mount/kc8EXeMhqMJupiclGqv4IQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
ATI Mauser 98 Scope MountFeatures:- Constructed of Military Type III Anodized, 6061 T6 Aluminum- Minimal Interior Barrel Channel Relief- Will Not Fit Swedish .38/M96 or Small-Ring Mausers- Hidden Barrel Clamps Secure Mount to Receiver- Manufactured in the USA- Limited Lifetime WarrantySpecifica tions:- Fits: Most Large-ring Mauser 98s with standard bent-bolt (see Mauser Bolt Handle, MBH 1800). German K-98, Czech VZ-24, Tugo 48/48A, Turkish 1903/1937/1938/19 46, etc. Will not fit Swedish .38/M96 or small-ring Mauser's- Color: Black
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser FN Gloss
+ $4.99 shipping
/redfield-1piece-standard/DvxGRQ2-hJqTlqnSCQAKTw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al: Steel Style: Standard Fits: Mauser FN Browning FN Actions (264-458 Calibers) Colt 57 H&R Model 300, 301, 330, and 370 (Pre 1973) Interarms Mark 10 Marlin 455 Mark 10 Parker Hale Models 1000, 1100 and 1200 Sako Mauser actions Sears/JC Higgins 50 and 51 (Pre 1955) Weatherby FN Western Field 30/06 Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Larg e Ring Mauser,FN Mauser & Mauser 98 (Large Ring),1-Piece
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Mauser 96 Small Ring Matte
+ $4.99 shipping
/talley-2piece-scope-base/rYUtCZ75FpV9AL6rTF6K7g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Mauser Small Ring Notes: Mounting hardware included. .175 high Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Smal l Ring Mauser,Mauser 96,2-Piece,Rear & Front Sets
More

Timney Featherweight Deluxe...

$107.99
Brownells Timney Featherweight Deluxe Triggers W/Safety - Fwd Fits Mauser Military Swedish 96
+ $7.95 shipping
/timney-featherweight/4Qq7_A2pn7SFRhghDY6Y0Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight Deluxe (FWD) features the same adjustments and hand fitting as the Deluxe but includes trigger blocking and side safety. Mfg: Timney
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser 96 Matte
Free Shipping
/leupold-2piece-standard/TYkFVoUXuAg1WFUSQEr5dg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Smal l Ring Mauser,Mauser 96,2-Piece,Rear & Front Sets
More

Brownells Barrel/Receiver...

$129.99
Brownells Brownells Barrel/Receiver Taps - Large Ring Mauser Tap
+ $7.95 shipping
/brownells-barrelreceiver/EKrVBAHnRjw5daCNPJe0rw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Clean and chase dinged or imperfect threads, either on the barrel or in the receiver. Real lifesavers for any rebarreling job, especially good when installing any of our no-lathe, pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. .980-12 tpi fits Small Ring Mauser (plug tap cuts full-depth threads on small ring 98s with internal shoulders); 1.00-16 tpi fits FN-FAL; 1.10-12 tpi fits Large Ring Mauser; 11⁄16-16 tpi fits Remington 700 and XP-100; 1.055-20 tpi
More

Brownells Receiver Taps -...

$129.99
Brownells Brownells Receiver Taps - Large Ring Mauser Tap
+ $7.95 shipping
/brownells-receiver-taps/-k8Z49j7-asJV8AQvGTItA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
RECEIVER TAPS Mfg: Brownells
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings 96 Mauser Small Ring Matte Low
+ $4.99 shipping
/talley-lightweight/tetjCNvw15cD3K-3TyKU0A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Includes attachment screws and allen wrenchNote: The 96 American straight pull rifle takes a Remington 700 mount (Product Family # 1781129972), not a standard 96 small ring Mauser mount. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: 500High: .600 Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Smal l Ring Mauser,Mauser 98 (Small Ring),Mounting Systems
More

Timney Sportsman Trigger -...

$58.99
Brownells Timney Sportsman Trigger - M98-Fn-Sp Trigger, See Specs For Fits
+ $7.95 shipping
/timney-sportsman-trigger/fNJBfXo-GHl2MHcrca230Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
CNC machining and advanced metallurgy provide a durable, reliable replacement trigger for stock military and sporterized Mauser, Springfield and Enfield rifles. Adjusts for pull weight, (2-4 lb.), creep and overtravel. Lock nuts hold settings. Excellent replacement for that heavy military trigger. No safety. Mfg: Timney SPECS: 6061 T6 aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250 (6.3mm) wide shoe. M91-4 has longer trigger shoe to fit un-modified military rifles. M98-K and M91-4K sets forward to fit short, 1.75, triggerguards. Fits stock,
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser FN, Remington 798 Matte
Free Shipping
/leupold-2piece-standard/21bV7ZDkn0fhwe74rklB-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Fits: Browning FN actions (.264-.458) Harrington & Richardson JC Higgins (Pre-1955) Marlin 455 Mausers FN and Mark 10 Parker Hale Models 1000, 1100, and 1200 Sako (round receivers) and Weatherby FN Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning FN Action
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings 96 Mauser Small Ring Matte Low
+ $4.99 shipping
/talley-lightweight/16sL56ubepmWONkDpRcR9g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Includes attachment screws and allen wrenchNote: The 96 American straight pull rifle takes a Remington 700 mount (Product Family # 1781129972), not a standard 96 small ring Mauser mount. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: 500High: .600 Searches for products like these typically include: Optics,Scope Bases & Mounts,Mauser,Smal l Ring Mauser,Mauser 96,2-Piece,Rear & Front Sets
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410