Hydraulic Tools

Ingersoll-Rand Super Duty 1-drive Pneumatic Impact Wrench...big power for tight spaces - 290High- production truck tire-changing requires the brute force only this jumbo air impact wrench mechanism delivers 1,600 ft./lbs. of maximum torque, and long-lasting durability. You'll also use it for spring work, tractor pads, bus maintenance, and off-road and farm equipment. Gets into cramped spaces with big power and a 3-way adjustable handle.Ingersoll-R and Super Duty 1-drive Pneumatic Impact Wrench...big power for tight spaces High-production truck tire-changing requires the brute force only this jumbo air impact wrench mechanism delivers 1,600 ft./lbs. of maximum torque, and long-lasting durability. You'll also use it for spring work, tractor pads, bus maintenance, and off-road and farm... Less

Features and Benefits: Air treadle pump Built-in overload circuit to protect equipment Foot actuated and released to keep hands free for set up Requires only 90 psi air pressure Steel reservoir Pump size: 10L x 5W x 7-1/8H. Output flow rate: 30 cu. In. / min. (no load). Output flow rate: 7.3 cu. in. / min. (10,000 psi).

Also known as: SUN7796, SUU-7796; 1000 lb. (1/2 Ton) Air/Hydraulic Telescopic Transmission Jack Use for removal, installation and transporting of transmissions and transfer cases on vehicles that are supported by lifts. Foot activated pump pedal for hands free raising of the rams. Lowered telepscopic rams enable the transmission to be transferred from the jack to the work table and extended to reach a miximum height of 74 Foot activated release pedal provides slow controlled lowering of load Universal saddle with four ratcheting arms quickly adjust to the transmission pan configuration Nylon strap tie down secures the load to the saddle Overload valve prevents jack from being used beyond its rated capacity. Wide base legs with swivel caster, polyurethane tread wheels provide stability and... Less

Also known as: ATD-7434, ATD7434; Jack Size: 34-1/8 (L) x 36-1/8 (W) x 40 (H) Lifting Range: 36-3/4 to 76-5/8 Patented built-in by-pass device 90-175 psi 4 Adjustable arms fit most trans. pan flanges Foot operated pump & release leaves hands free Saddle: 12-1/2 x 11-1/2 Max. 8-3/4 x 8-1/4 Min. Saddle Tilt: 42 FWD & 46 BWD, +/-12 Side Meets ANSI Standards Full Swivel Ball Bearing Casters Wide Base Stability

Ingersoll Rand 3/8 Standard-Duty Air Angle Drill gets into hard-to-reach areas and is reversible - IR7807RWhen space is at a minimum, and a regular drill just can't get in there, this Ingersoll Rand 3/8 Air Angle Drill can, with its compact, low-profile angled head. It's a durable, reliable tool for drilling in sheet metal, wood and composites. Productivity features include reversible motor, high-quality Jacobs keyed chuck, rear exhaust, and grease point on angle head for easy maintenance. Angle head is 3.8 tall with jaws fully extended, 3.3 when retracted. SPECIFICATIONS HP 0.33 Max. Free Speed 1800 RPM Average Air Consumption 4 CFM Air Consumption At Load 17 CFM Air Inlet 1/4 NPTF Min. Hose Size 3/8.Standard-Duty Air Angle Drill gets into hard-to-reach areas and is reversible Ingersoll... Less

Ingersoll Rand 1/2-drive Pneumatic Drill generates 0.5-HP to handle the big jobs - IR7803AIf your regular power drill can't do it, Ingersoll Rand's 1/2 Air Drill can handle the big drilling jobs. It has a powerful 0.5-HP motor with heavy-duty ball-and-needle bearings and variable-speed throttle. Includes 1/2 keyed chuck and pistol grip, plus auxiliary side handle for greater control. SPECIFICATIONS HP 0.5 Max. Free Speed 500 RPM Side Handle Yes Average Air Consumption 4 CFM Air Consumption At Load 27 CFM Air Inlet 1/4 NPTF Min. Hose Size 3/8.Handle the big jobs Ingersoll Rand 1/2-drive Pneumatic Drill generates 0.5-HP to handle the big jobs - IR7803A If your regular power drill can't do it, Ingersoll Rand's 1/2 Air Drill can handle the big drilling jobs. It has a powerful 0.5-HP motor... Less

This is the perfect tool for all light-duty drilling needs. It features a keyless chuck thus allowing quick changes of bits. The free speed is 2000 revolutions per minute with an average air consumption of 4.5 cubic feet per minute. The inlet used is 1/4 inch National Pipe Thread (NPT) female.

Air velocity kit, range 0-10.00 w.c. (2.491 kPa), max. pressure 5 psig, kit includes static pressure tips, rubber tubing, Pitot tube, step drill, air velocity slide chart and carrying case.

This Arcan Air/Hydraulic Shop Press has a sliding head design with winch and cable operation. U.S.A. Dimensions L x W x H in. 34 x 42 1/2 x 78, Working Range in. 1-32, Continuous Force Tons 100, St...

Ingersoll Rand 3/8-drive Heavy-Duty Reversible Air Drill handles your day-in day-out general-purpose drilling - IR7802RAYou'll use this Ingersoll Rand 3/8-drive Heavy-Duty Pneumatic Drill for honing, reaming or general drilling, and you'll appreciate the quiet-tool engineering. Reversible, so you can do all sorts of fastening and unfastening too-just flip the quick-reverse lever. Powerful 0.5-HP motor with variable-speed throttle. Standard keyed chuck. SPECIFICATIONS HP 0.5 Max. Free Speed 2000 RPM Average Air Consumption 4 CFM Air Consumption At Load 26 CFM Air Inlet 1/4 NPTF Min. Hose Size 3/8.Handles your day-in day-out general-purpose drilling Ingersoll Rand 3/8-drive Heavy-Duty Reversible Air Drill handles your day-in day-out general-purpose drilling - IR7802RA You'll use this... Less

This 22-ton jack has large steel wheels for easy positioning. It also has a sturdy, one-piece handle and a self-returning spring for ease and convenience.

Also known as: ATD-5812, ATD5812; User-friendly foot-actuated design for easy control of moving fluid at tremendous rate Uses 3/8 NPT(f) fluid coupler Built-in pressure bypass system protects overload operation Efficiently operates single-acting ram applications in many industrial and construction settings Provides up to 10,000 psi with standard shop air supply of 110 - 175 psi Made of durable, lightweight, corrosion-free aluminum Usable Oil Capacity: 91.5 cu. in. Pressure Rating: 10,000 psi Air Pressure Rating: 110 - 175 psi Output Flow Rate (No Load): 61 cu. in.-min. Output Flow Rate (Load): 11.0 cu. in.-min.

The SP-7825 3/8 'Mini' Composite Impact Wrench gives you the ease of use and convenience of a smaller size unit with all the torque you will need. The unit has a doublehammer clutch and offers the SAS (side and side) system for one hand operation of forward and reverse. An air regutor and handle exhaust are built into the base of the unit. Unit specifications include a square drive and bolt capacity of 3/8, a working torque range of 5-47 ft-lbs, a free speed of 17,000 rpm, a viibration level of 4 m/s, and a sound level of 84.2 dB. SP Air Corporation is a manufacturer of high quality pneumatic tools with over 30 years ofexperience. SP Air Corporation'sdist ribution extends to over 40 countries worldwide. People buy our tools because they have anexcellent reputation for getting the job... Less

This new air drill packs a lot of power into a very compact form. It delivers enough speed and torque to drill into most materials with ease. And the angle head can be rotated 360º relative the handle to orient it properly for drilling while allowing you to grip the drill comfortably. The head, at only 1 long by 5/8 diameter, can fit into the tightest areas. Includes a safety throttle lever to prevent accidental activation of the drill. Specifications: 2800 RPM at .33 HP, 1.6 lbs., 10 overall length, head size is 1 x 5/8 diameter, accepts 1/4x 28 threaded drill bits.

Air Impact Wrenches & Ratchets | Drive Size (mm): 6.35 | Drive Size (inch): 1/4

The Enerpac PA-133 single-speed hydraulic air pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in plant maintenance, fabrication, production, bolting, vehicle repair, and other applications where compressed air is the preferred power source. It has a three-way control valve for advancing, releasing, or holding a single-acting cylinder. This single-speed pump is for applications with a constantly applied load. The pump is controlled by a treadle that can be operated by hand or by foot. The pump can be operated in either a horizontal or vertical orientation. A swivel coupling provides access to hydraulic connection and pump operation. An internal pressure relief valve helps protect the pump from overload. The pump has base mounting slots. The... Less

SP Air Corporation's SP-7146S is an ultralight mini composite impact wrench. The unit comes with a twin hammer clutch and has an easy-access forward and reverse button. Unit specifications include a bolt capacity of 1/2, a working torque of 3.7-190 ft-lbs., and an air consumption of 21.2 cfm. SP Air Corporation is a manufacturer of high quality pneumatic tools with over 30 years ofexperience. SP Air Corporation'sdist ribution extends to over 40 countries worldwide. People buy our tools because they have anexcellent reputation for getting the job done. They are easy to maintainand come with a full warranty. We understand and appreciate thevalue of your business. Thats why we have made it our mission toprovide you with reliable, quality pneumatic tools. For more than 20 years, wehave... Less

This is Brand New in the Box Eagle - Air Tool - EGA130 - 3/4 Impact Wrench Technical Specifications SCFM / PSI: 6.6 SCFM @ 90 PSI Free Speed RPM: 4000 Clutch Type: Pin Square Drive (in): 3/4 Max Torque: 1000 ft./lb. Exhaust: Handle Air Inlet (in): 1/4 Downloads Owner Manual Shipping Policies: This item is only available to the 48 Continental US States at the shipping price shown, if shipping to Alaska or Hawaii please email us prior to purchasing so we can give you your shipping options and

This is the drill you need to get into those tight spaces. It has a head height of just over an inch, and produces enough torque at 2800 RPM to drill through steel. Excellent speed control, and has a solid, well-balanced feel.Spindle 1/4-28 ThreadHead Length 1.08 (27 mm)2,800 RPMHead Width .65 (16 mm).33 hp (.25 kw)10 (254 mm) Overall LengthVariable speed controlFull 1 year warranty 

Chrome plated lift arm Self-retracting ram springs for fast ram retraction Push valve lever for fast air control 3 position lock lever Safety overload valve Larger diameter wheels for ease of operation Air Pressure: 90 PSI Lift: 4-3/4 3 piece saddle extension set included for greater versatility Two-piece handle Capacity (Tons): 22 Low Height (In.): 9 Raised Height (In.): 17 Length (In.): 21 Screw Adjustment: 3.85 Chassis Width (In.): 13 Handle Length (In.): 49

Compact Air Capital right-angle drill gets into tight spots. Powerful 0-3200 RPM variable speed drill delivers high speeds and torque. Accepts standard threaded bits to eliminate chuck slippage. It...

The CP9882 Air Hydraulic Riveter is a very compact riveter with a 3/16 max capacity. Tool designed for rivets in aluminum, copper and softer materials. Easy pulling up to 2,200 lbs. Transparent container with holes for quick release of rivet ends. Includes nose pieces for rivets 3/32, 1/8, 5/32 and 3/16