Marlin 39m Sports and Outdoors - Shopping.com
Showing results for "marlin 39m"
Results 1 - 40 of 1500+

Ironsighter 2-Piece...

$19.99
MidwayUSA Ironsighter 2-Piece Weaver-Style Scope Base Marlin 336, 444, 45-70, 922M with 1 Weaver-Style Rings Medium Matte
+ $4.99 shipping
/ironsighter-2piece/e27kvLinLTp9rfKcMm9pjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,Mounting Systems
More

Power Custom 1-Piece...

$48.99
MidwayUSA Power Custom 1-Piece Picatinny-Style Scope Base Marlin Camp Carbine Aluminum Matte
+ $4.99 shipping
/power-custom-1piece/M645uJMtwKB-9dbAiL87LQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesFully CNC machined from extruded aluminum for precision fittingAccepts most modern picatinny scope ringsIncludes 4 mounting screws and an allen wrench for installation. This Power Custom 1- Piece Picatinny Style Scope base is the perfect mount that you have been looking for for your marlin Camp Carbine in 9mm or .45. This is Fully CNC Machined from extruded aluminum and fully machined for precision fitting. Included are four mounting screws and an Allen wrench used to install. Accepts most modern Picatinny Style scope rings. Technical InformationMateri al: AluminumStyle: PicatinnyFits: Marlin Camp Carbine 9mm or.45Notes: Attaches to the factory pre-drilled and tapped holes in the Marlin Camp Carbine in 9mm or .45. Measures 5.325x..825x.465 Mounting hardware included. Searches for... Less
More

Egw Marlin 1895, 336, 444...

$29.99
Brownells Egw Marlin 1895, 336, 444 Scope Bases - Marlin 1895, 336, 444 0 Moa
+ $3.95 shipping
/egw-marlin-1895-336-444/U_-9894FXYrUDepv-25MMQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Marlin 1895, 336, 444 Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrench. EGW recomme Mfg: Egw
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 336 Matte
Free Shipping
/xs-lever-scout-scope/W90_IYqGdSCTWAyTH3Jlyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Uncle Mike's Hammer Extension...

$9.95
eBay Uncle Mike's Hammer Extension Marlin Lever Action 39a 39m 1894 Glenfield 30a
+ $2.60 shipping
/uncle-mikes-hammer/EauJMUZ0FTMgRkQ1bd5c1A==/info
eBay
IN_STOCK ( In stock )
This is an new and unused Uncle Mike's Hammer Extension for Marlin and Glenfield rifles.  This is a blued part and comes complete with an Allen wrench and 2 set screws.   Per the package inside dimension is .320 x .094. Fits the following per the package: Marlin 39A, 39M, 1894, 1894C, 1895S, 336C, 336T, 375, 444S    (1957 - 1982 manufacture) Glenfield 30A  (1957 - 1982 manufacture). THIS WILL NOT FIT POST 1983 MARLINS - they have a different dimension.
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 1894 Matte
Free Shipping
/xs-lever-scout-scope/OP9yiUJHq3oLwzv3dH0BEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Note: Will not fit models with octagonal barrels. Matte black finish.Technical InformationMateri al: Anodized aluminumFinish: matte blackFeatures: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: NoNotes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1894,1-Piece
More

Nikon S-Series 2-Piece Steel...

$26.99
MidwayUSA Nikon S-Series 2-Piece Steel Weaver-Style Scope Base Marlin 336 Matte Steel
+ $4.99 shipping
/nikon-sseries-2piece/8M34inEeHxM8xHWkTXhuuQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The S-Series Base design is one of the strongest and most versatile mounting systems available. These bases offer a full width recoil slot in each base that mates with the recoil control keys of S-Series rings, resulting in maximum bearing surface to fend-off severe recoil. Note: Mounting hardware included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,2-Piece,Rear & Front Sets
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 444P, 1895 Matte
Free Shipping
/xs-lever-scout-scope/MLDrKIEo161ksPJWa3iWaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1895,1-Piece
More

EGW 1-Piece Picatinny-Style...

$27.99
MidwayUSA EGW 1-Piece Picatinny-Style Scope Base Marlin 336, 1895 Matte
+ $4.99 shipping
/egw-1piece/RPksur_jjOq3h8_cT_gYGQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Marlin 39a Weaver Picatinny...

$19.99
eBay Marlin 39a Weaver Picatinny Scope Mount, Matte Black
+ $4.01 shipping
/marlin-39a-weaver/kaNDzLjImXB4yoDq-4Ifwg==/info
eBay
IN_STOCK ( In stock )
516   Marlin 39A Picatinny Scope Mount  Weaver  Pi catinny  Multi Slot Scope Mount   Also   Id eal for  Micro Dots,  Red Dots and Integral Mounts Brand New 1 piece picatinny  style base set for MARLIN 39A, with round  barrels, Golden and Mountie. Includes allen head mounting screws and allen key Use with either  Weaver style  or Picatinny Rings Mount is low enough to use iron sights  when scope and rings are removed. Click Here to See my other auctions for this Mount with a Ring Set included    Check out my other  Items
More

EGW 1-Piece Picatinny-Style...

$36.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Scope Base Marlin 917, 982 Matte
+ $4.99 shipping
/egw-1piece/NQJxxUqgkK32qaSi0KNOWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 917
More

Marlin Ejector Base Screw

$3.99
Brownells Marlin Ejector Base Screw
+ $3.95 shipping
/marlin-ejector-base-screw/z_tYb5fNgN71tuRyrq84IQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EJECTOR BASE SCREW Mfg: Marlin
More

Head Marlin Dry Snorkel, Black

$19.99
Kohl's Head Marlin Dry Snorkel, Black
+ $8.95 shipping
/head-marlin-dry-snorkel/dl2vibmEiRH31XpoDH56Zw==/info
Kohl's
IN_STOCK ( In stock )
Get your head below the water with this Head Marlin Dry snorkel, which is designed to keep water out even when submerged. Compact top dry snorkel keeps water out & gives easy breathability when surfacing Low profile swiveling snorkel keeper provides comfort & reduces pulling on mask Pro line comfort bite mouthpiece Manufacturer's 2-year limited warrantyFor warranty information please click here Imported Model Numbers Black: 481219BK HS Blue: 481219BL HS Pink: 481219PK HS Yellow: 481219YL HS Size: Onesize. Gender: Unisex. Age Group: Adult.
More

The Gun Garage Marlin 60 99c...

$49.99
Brownells The Gun Garage Marlin 60 99c 990 Inside Magazine Tube - Marlin 60 99c 990 Inside Magazine Tube Post-1975
+ $3.95 shipping
/the-gun-garage-marlin-60/KfOB3wl3wIyENeHl5MSecw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Post-1975: This is an inside magazine tube for the Marlin model 60, 99C, & 990 rifles. It replaces Marlin part number 507522. It is 20 7/8 from the tip of the knurling to the end of the tube and 22 1/8 overall. It fits serial numbers that begin with 11 and go through 25. Pre-1975: This is an inside magazine tube for the pre 1975 Marlin Model 60 rifles. These haven't been produced in 38 years. If your serial number starts with 26 or higher, the outside tube measures 20 9/32 from the receiver to the end, and the J notch is 1/4 long - this is the tube! Marlin Magazine Tube Mfg: The Gun Garage SPECS: Made for post and pre 1975, model 60.
More

Hammer Extension for Marlin...

$13.59
Walmart.com Hammer Extension for Marlin Lever Actions (1983 and Later), Ship from USA, Brand Uncle Mike's
Free Shipping
/hammer-extension-for/NKIFAJsKb201ApT7Z_zGaA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This extension allows the hammer to be accessed to the side of the scope instead of underneath for more positive control of the firearm. Fits all Marlin lever actions made in 1983 or later, including 39A, 39M, 1984, 1984C 1985S 336C, 336T, 375, 444S, Glenfield 30A. Knurled surface to improve grip. For either right or left hand use. Allows for easy hammer pull with low-mount scopes. Allen wrench included. UBO Online Shop is a manufacturer and trader specialized in the research, development and production of electric and Children’s Toys. We are located in UNITED STATES,CA with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. If you are interested in any of... Less
More

Marlin Magazine Tube...

$35.99
Brownells Marlin Magazine Tube Assembly, Inner
+ $3.95 shipping
/marlin-magazine-tube/W2aq1HML4YGvim9_PQbyqA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
MAGAZINE TUBE ASSEMBLY, INNER Mfg: Marlin
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/talley-2piece-scope-base/Yk3sInjpnEkXp0lzzTelRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Marlin 336 Notes: Mounting hardware included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,2-Piece,Rear & Front Sets
More

Uncle Mike's Hammer Extension...

$10.60
eBay Uncle Mike's Hammer Extension For Marlin Lever Actions (1983 An... Free Shipping
Free Shipping
/uncle-mikes-hammer/sqK1uJ1B_SL949-y3G90rw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Description New Uncle Mike's Hammer Extension for Marlin Lever Actions (1983 and Later) by Uncle Mike's Product Description This extension allows the hammer to be accessed to the side of the scope instead of underneath for more positive control of the firearm. Fits all Marlin lever actions made in 1983 or later, including 39A, 39M, 1984, 1984C 1985S 336C, 336T, 375, 444S, Glenfield 30A. Knurled surface to improve grip. For either right or left hand use. Allows for easy hammer pull with low-mount scopes. Allen wrench included. Product Dimensions: 3 x 0.2 x 8 inches Shipping Weight: 0.5 ounces Domestic Shipping: Item can be shipped within U.S. International Shipping: This item is not eligible for international shipping. Learn More Item model number: 24580 Product Features N/A Imported Fits... Less
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
Free Shipping
/leupold-1piece-standard/0ll1Yd4Zr-i2u7QjcwjyxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Marlin 36, 336, 444, 1895, 9, 45, 922M Notes: Torx head screws and driver included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

The Gun Garage Marlin 60 99c...

$49.99
Brownells The Gun Garage Marlin 60 99c 990 Inside Magazine Tube - Marlin 60 99c 990 Inside Magazine Tube Pre-1975
+ $3.95 shipping
/the-gun-garage-marlin-60/owH9T6GoMIMnpKFIOIXvnA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Post-1975: This is an inside magazine tube for the Marlin model 60, 99C, & 990 rifles. It replaces Marlin part number 507522. It is 20 7/8 from the tip of the knurling to the end of the tube and 22 1/8 overall. It fits serial numbers that begin with 11 and go through 25. Pre-1975: This is an inside magazine tube for the pre 1975 Marlin Model 60 rifles. These haven't been produced in 38 years. If your serial number starts with 26 or higher, the outside tube measures 20 9/32 from the receiver to the end, and the J notch is 1/4 long - this is the tube! Marlin Magazine Tube Mfg: The Gun Garage SPECS: Made for post and pre 1975, model 60.
More

Power Custom Series 1 Stoning...

$24.99
MidwayUSA Power Custom Series 1 Stoning Fixture Adapter Marlin 336, 1894, 1895
+ $4.99 shipping
/power-custom-series-1/n8AXb19PVkwmub7nHp7sPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This fixture allows positioning of the sear or hammer at a precise angle for custom trigger pull adjustments. Once the part is in position, an Arkansas or India stone is set on top of the roller guide (included) to stone the mating surfaces on the hammer or sear. Fixture is drilled to hold six of the most common hammer and sear pins in the same alignment as they are in the gun, allowing the gunsmith to check sear engagement outside of the firearm. This fixture requires a different adapter for each firearm (sold separately). For best results, a small clamp can be used to hold the part against the fixture. Technical InformationMateri al:Polymer Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools, Gunsmithing Fixtures
More

Leupold 1-Piece man Scope...

$9.99
MidwayUSA Leupold 1-Piece man Scope Base Weaver-Style Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
Free Shipping
/leupold-1piece-man-scope/Ietn9B_oTj7XZlBULHA3XA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Leupold Rifleman scope mounts are precision- machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. With a black matte finish, these bases are an ideal match for the Rifleman scope and will work with any Weaver-Style rings.Technical InformationMateri al: Aluminum Style: Weaver Fits: Marlin Model 336 Notes: Allen Screws and wrench included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Head Marlin Dry Snorkel,...

$19.99
Kohl's Head Marlin Dry Snorkel, Yellow
+ $8.95 shipping
/head-marlin-dry-snorkel/Loyz7Cg_PMOxbqJbVYVlEQ==/info
Kohl's
IN_STOCK ( In stock )
Get your head below the water with this Head Marlin Dry snorkel, which is designed to keep water out even when submerged. Compact top dry snorkel keeps water out & gives easy breathability when surfacing Low profile swiveling snorkel keeper provides comfort & reduces pulling on mask Pro line comfort bite mouthpiece Manufacturer's 2-year limited warrantyFor warranty information please click here Imported Model Numbers Black: 481219BK HS Blue: 481219BL HS Pink: 481219PK HS Yellow: 481219YL HS Size: Onesize. Gender: Unisex. Age Group: Adult.
More

Grovtec Us All Marlin Lever...

$9.20
eBay Grovtec Us All Marlin Lever Actions (1983 Or Later) Hammer Extension Gthm74
Free Shipping
/grovtec-us-all-marlin/QlPPqfUTfuU3syvzqb_HqQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Powered by Frooition.com Home About Us Shipping Returns Contact Shop Categories GrovTec US All Marlin Lever Actions (1983 or later) Hammer Extension GTHM74 GrovTec US All Marlin Lever Actions (1983 or later) Hammer Extension GTHM74 Item Description Hammer Extensions Features: - All Marlin Lever Actions made in 1983 & later including 39A, 39M, 1894, 1894C, 1895S, 336C, 336T, 375, 444S, Glenfield 30A About Us About Us Payment Shipping Condition Returns About Us To be honest, we are not much different than our customers! We are a family owned and operated company, filled with hunters, police officers, military, and gun enthusiasts. We even have a survivalist or two floating around, both of whom would like to remain anonymous. We love what we sell and we have a passion for it. As fellow... Less
More

Talley 1 Ring Mounts Marlin...

$52.99
MidwayUSA Talley 1 Ring Mounts Marlin 882, 917 Matte Medium
+ $4.99 shipping
/talley-1-ring-mounts/7MwWZhYu6sZzY4Rp8Wz02g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope.Technical InformationMateri al: Steel Ring Height: .500 from bottom of ring opening to rifle receiver Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 882
More

Wood Plus Marlin 336 Stock...

$77.44
Brownells Wood Plus Marlin 336 Stock Fixed Oem - Marlin 336 Stock Fixed Oem Brown
Free Shipping
/wood-plus-marlin-336/g8SstaoHx2rfzOEC7Jlk3g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Classic walnut, finish sanded, and given a three-coat, Danish oil finish. Provides a good, serviceable replacement for the factory stock. Offers excellent weather resistance, plus easy touch-up of dings or nicks. Quality wood, has a straight grain pattern. 95% inletted, ready to install; only minor fitting required to fit to your action. Mfg: Wood Plus SPECS: Walnut, straight grain, no figure. May not accept original hardware without fitting.
More

RCBS 3-Die Set 450 Marlin

$46.49
MidwayUSA RCBS 3-Die Set 450 Marlin
+ $7.59 shipping
/rcbs-3die-set-450-marlin/yijghIzH0ws7YpizO-kX5g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately.Notes:D oes not feature a carbide sizing ring (cases must be lubed prior to sizing)Lifetime Guarantee from RCBSShellholder not included. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,450 Marlin
More

Wood Plus Marlin 336 Stock...

$54.99
Brownells Wood Plus Marlin 336 Stock Fixed Oem - Marlin 336 Stock Fixed Oem Brown
Free Shipping
/wood-plus-marlin-336/E7bfcTUgM7nmtXGnNBL-EQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish. Mfg: Wood Plus SPECS: Walnut, straight grain, no figure. Accepts original hardware. Win. 94 Pre '64 fits carbine models.
More

Head Marlin Splash Snorkel,...

$16.99
Kohl's Head Marlin Splash Snorkel, Black
+ $8.95 shipping
/head-marlin-splash/nyn_VM4QBpDhmCcUY2blZg==/info
Kohl's
IN_STOCK ( In stock )
This silicone snorkel from Head has a sleek semi-dry top that helps prevent water from splashing into the tube. Low profile, swiveling snorkel keeper is comfortable against the face & reduces pulling on the mask strap Pro line comfort-bite mouthpiece provides hours of comfortable use Silicone, hard plastic, molded glass Spot clean Imported Manufacturer's limited 2-year warrantyFor warranty information please click here Model Numbers Black: 481220BK HS Blue: 481220BL HS Yellow: 481220YL HS Size: Onesize. Gender: Unisex. Age Group: Adult. Material: Silicone/Glass/Pl astic.
More

Leupold 1-Piece Quick-Release...

$59.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
Free Shipping
/leupold-1piece/EDbiOh6dGTKulO_wHdkKsg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Marlin, Camp 45, Manual,...

$6.29
eBay Marlin, Camp 45, Manual, 45acp, Camp Carbine 11 Pages
+ $2.99 shipping
/marlin-camp-45-manual/GLTQLsKLepjR_Jnb3RbiWQ==/info
eBay
IN_STOCK ( In stock )
MARLIN,  CAMP 45 CAMP CARBINE 8 1/2 X 11 Comb Binding  11 Pages ***************** ***************** ***************** ***************** ***************** ****  5 Mil  Thick  Lamin ated  Plastic  Fr ont  and  Rear  C overs  Available For  Only  $3.00  Extra ***************** ***************** ***************** ******** YOU  MUST  EMAIL  ME  AS  SOON  AS   YOU  PURCHASE,  SO  I  CAN  LAMI NATE  THIS  BEFOR E  I  SHIP  IT  T O  YOU.. ALSO  I  WILL  BI LL  YOU  FOR  THE   EXTRA  $3.00..
More

Leupold 1-Piece Quick-Release...

$69.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Silver
Free Shipping
/leupold-1piece/_t88rAzXxnHCnW-kv_VFUQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Marlin, Camp 9, Manual, 9mm,...

$7.46
eBay Marlin, Camp 9, Manual, 9mm, Camp Carbine 11 Pages
+ $2.89 shipping
/marlin-camp-9-manual/aB6PrfYD-ZYH_TaSphhLzg==/info
eBay
IN_STOCK ( In stock )
MARLIN,  CAMP 9 CAMP CARBINE 8 1/2 X 11 Comb Binding  11 Pages ***************** ***************** ***************** ***************** ***************** ****  5 Mil  Thick  Lamin ated  Plastic  Fr ont  and  Rear  C overs  Available For  Only  $3.00  Extra ***************** ***************** ***************** ******** YOU  MUST  EMAIL  ME  AS  SOON  AS   YOU  PURCHASE,  SO  I  CAN  LAMI NATE  THIS  BEFOR E  I  SHIP  IT  T O  YOU.. ALSO  I  WILL  BI LL  YOU  FOR  THE   EXTRA  $3.00..
More

Warne Maxima 1-Piece Aluminum...

$18.79
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Silver
+ $4.99 shipping
/warne-maxima-1piece/iMhxHvUlNWcXiwW1WU-0zQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Power Custom Marlin Camp...

$7.99
Brownells Power Custom Marlin Camp Carbine Recoil Buffer - Marlin Camp Buffer, Cmp45/9
+ $3.95 shipping
/power-custom-marlin-camp/9CwweVk9lfj2iATJUZl_MQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Drop-in replacement for a worn or broken recoil buffer keeps your 9mm or .45 ACP Camp Carbine cycling smoothly and reliably. Helps reduce felt recoil. Rugged molded polymer will last for at least 5,000 rounds. Easy installation with included instructions. Mfg: Power Custom SPECS: Molded polymer, blue. Fits Marlin Camp Carbine chambered in 9mm and .45 ACP.
More

Warne Maxima 1-Piece Aluminum...

$18.79
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
+ $4.99 shipping
/warne-maxima-1piece/z3h1ECxgKAfTPEk3JTw_JQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 336,1-Piece
More

Head Marlin Splash Snorkel,...

$16.99
Kohl's Head Marlin Splash Snorkel, Blue
+ $8.95 shipping
/head-marlin-splash/x9roBUvYj4LAcSf30T3pfA==/info
Kohl's
IN_STOCK ( In stock )
This silicone snorkel from Head has a sleek semi-dry top that helps prevent water from splashing into the tube. Low profile, swiveling snorkel keeper is comfortable against the face & reduces pulling on the mask strap Pro line comfort-bite mouthpiece provides hours of comfortable use Silicone, hard plastic, molded glass Spot clean Imported Manufacturer's limited 2-year warrantyFor warranty information please click here Model Numbers Black: 481220BK HS Blue: 481220BL HS Yellow: 481220YL HS Size: Onesize. Gender: Unisex. Age Group: Adult. Material: Silicone/Glass/Pl astic.
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Marlin 1894 Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/euA02AAJXwCkd28PJOVJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel standard bases from Weaver feature rear mount windage adjustments, a positive locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Notes: Torx head screws and driver included. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1894,1-Piece
More

Xs Sight Systems Marlin...

$99.00
Brownells Xs Sight Systems Marlin 336/1894/30as Ghost Ring Sight Set - Marlin 336/1894/30as Ghost Ring Sight Set White
Free Shipping
/xs-sight-systems-marlin/w01JQHdkWSIXEAQntW4NkQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
One-piece front base, plus a fully adjustable ghost ring rear sight for Marlin lever guns. Hunters and competitive shooters alike will benefit from the faster sighting offered by the .191 and .230 inside diameter rear apertures and .100 wide, white line front sight blade. Ghost Ring sets include a rear ghost ring sight that mounts directly to the receiver without drilling and trapping. Mfg: Xs Sight Systems SPECS: Steel, black, matte finish. 336/1894/30AS Ghost Ring Set - Fits Marlin 336, 1894, and 30AS with .700 c-to-c front ramp hole spacing.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501