Category

Optics Accessories
Showing results for "marlin 3030 lever action combo"
Results 1 - 40 of 246

Marlin Lever Action Spring...

$21.99
Brownells Marlin Lever Action Spring Kit - Marlin Spring Kit
+ $7.95 shipping
/marlin-lever-action/cqFfMz4U9OSNrP9dMcbIWA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-install components let you fine-tune your Marlin lever gun for a smoother- operating action and more consistent trigger pull without making permanent alterations to the rifle. Simply replace the factory hammer spring and lever-plunger spring with the springs from the kit, then use the color-coded nylon bushings and adjustment washers to select one of seven hammer spring tension settings. The difference between each setting is about 8%, so you can get the hammer spring tension that suits you best simply by choosing the right combination of bushings and washers. Tough, friction- reducing nylon bushings keep hammer spring aligned and prevent it from crawling over the front of the strut or Mfg: Palo Verde Gunworks SPECS: Zinc-coated steel springs, nylon bushings/washers. Kit contains... Less
More

Lever Action Spring Kit For...

$16.99
Brownells Lever Action Spring Kit For Marlin Lever Action - Lever Action Spring Kit
+ $7.95 shipping
/lever-action-spring-kit/lUcVTs9nhmr2ILRu0oicbg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality, reduced power springs give the Cowboy Action shooter the advantages of a light, crisp trigger pull while reducing the effort required to cycle the lever assembly. Reduced power hammer spring replaces the heavy factory spring for improved trigger pull. Light, lever latch spring reduces latch pressure and friction for fast, easy cycling and quick follow-up shots. Mfg: Brownells SPECS: Steel, natural finish. Hammer Spring - 1¼'''' (3.8cm) long. Latch Spring - 13/16'''' (2.1cm) long. Fits Marlin 39A/444/94/95/336 Series rifles.
More

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 336 Matte
Free Shipping
/xs-lever-scout-scope/W90_IYqGdSCTWAyTH3Jlyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes.
More

Power Custom Series 1 Stoning...

$24.99
MidwayUSA Power Custom Series 1 Stoning Fixture Adapter Marlin 336, 1894, 1895
+ $4.99 shipping
/power-custom-series-1/n8AXb19PVkwmub7nHp7sPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This fixture allows positioning of the sear or hammer at a precise angle for custom trigger pull adjustments. Once the part is in position, an Arkansas or India stone is set on top of the roller guide (included) to stone the mating surfaces on the hammer or sear. Fixture is drilled to hold six of the most common hammer and sear pins in the same alignment as they are in the gun, allowing the gunsmith to check sear engagement outside of the firearm. This fixture requires a different adapter for each firearm (sold separately). For best results, a small clamp can be used to hold the part against the fixture. Technical InformationMateri al:Polymer
More

Lightweight Tactical Scope...

$29.99
Brownells Lightweight Tactical Scope Base - Marlin 1895, 336, 444 0 Moa
+ $7.95 shipping
/lightweight-tactical/Dcl8RS_Ogrv3OqgdXDI-jg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

EGW 1-Piece Picatinny-Style...

$32.99
MidwayUSA EGW 1-Piece Picatinny-Style Base Marlin 336, 1895 Matte
+ $4.99 shipping
/egw-1piece/RPksur_jjOq3h8_cT_gYGQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny/Weaver Fits: Marlin 336 and 1895 Notes: Mounting Hardware Included
More

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 444P, 1895 Matte
Free Shipping
/xs-lever-scout-scope/MLDrKIEo161ksPJWa3iWaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes.
More

Warne Maxima 2-Piece Steel...

$23.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Marlin 36, 336, 444, 1894, 1895, 9, 45, 922M Gloss
+ $4.99 shipping
/warne-maxima-2piece/oNCSstqp-gr1z9hT6ftXmw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Marlin 917, 982 Matte
+ $4.99 shipping
/egw-1piece/NQJxxUqgkK32qaSi0KNOWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Notes: Mounting Hardware Included
More

Burris FastFire Base Marlin...

$47.99
MidwayUSA Burris FastFire Base Marlin 336, 444, 1895 Matte
Free Shipping
/burris-fastfire-base/dGB6nCIMmpbLbc0Hj4pPmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Burris Fastfire Base is designed to allow for the use of a Burris Fastfire Sight on guns with the the appropriate rear sight cut. Mounts in place of the rear sight and is for use with the Burris Fastfire ONLY. Specifications: Material: Aluminum Color: Matte Black
More

Marlin Camp Carbine Recoil...

$7.99
Brownells Marlin Camp Carbine Recoil Buffer - Marlin Camp Buffer, Cmp45/9
+ $7.95 shipping
/marlin-camp-carbine/9CwweVk9lfj2iATJUZl_MQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Drop-in replacement for a worn or broken recoil buffer keeps your 9mm or .45 ACP Camp Carbine cycling smoothly and reliably. Helps reduce felt recoil. Rugged molded polymer will last for at least 5,000 rounds. Easy installation with included instructions. Mfg: Power Custom SPECS: Molded polymer, blue. Fits Marlin Camp Carbine chambered in 9mm and .45 ACP.
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/talley-2piece-scope-base/Yk3sInjpnEkXp0lzzTelRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Marlin 336 Notes: Mounting hardware included.
More

Weaver Mounts 49713 2-Piece...

$16.90
Walmart.com Weaver Mounts 49713 2-Piece Base/Rings For Marlin 336 See Thru Style, Gloss Black
+ $4.97 shipping
/weaver-mounts-49713/rQXBl_AuWtOWJBbNpdeLog==/info
Walmart.com
IN_STOCK ( In stock )
The perfect baseless system allows you the flexibility to shoot with open sights or scope on the same gun. It has a 210 degree steel top cap that makes it easy for mounting. Designed for scopes with one-inch tubes.
More

Ironsighter 2-Piece...

$19.99
MidwayUSA Ironsighter 2-Piece Weaver-Style Scope Base Marlin 336, 444, 45-70, 922M with 1 Weaver-Style Rings Medium Matte
+ $4.99 shipping
/ironsighter-2piece/e27kvLinLTp9rfKcMm9pjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

Marlin Lever Action Original...

$27.99
Brownells Marlin Lever Action Original Style Buttplate - Marlin Buttplate
+ $7.95 shipping
/marlin-lever-action/az0ezYmzqE7JwiTaS1-hRQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Reproduced from original factory designs to look right when restoring an older gun or building a custom rifle. Curved, cast steel buttplate comes in-the-white, ready for final fitting and bluing. Marlin Lever Action models require drilling and counterboring screw holes. Mfg: Allan Foundry SPECS: Steel. In-the-white. Marlin - 4½ (11.6cm) long, 1-5/16 (3.3cm) wide.
More

Talley Lightweight 2-Piece...

$28.10
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Marlin Models 336-1895 Matte Low
+ $4.99 shipping
/talley-lightweight/MfFgR3CeuvG8KmLW-StZxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin 336, 1895 Silver Medium
+ $4.99 shipping
/dnz-products-game-reaper/NoMHym1O79CVe8fLj5hUmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Base features a lightweight, aluminum body with integral scope rings. This creates a solid mount that won't shift or loosen up, maintaining exact target alignment shot after shot. The traditional ring/base joint is eliminated, reducing the possibility of the scope shifting under the stress of recoil.Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Ncstar Marlin Lever Action...

$14.98
eBay Ncstar Marlin Lever Action Weaver Scope Mount One-piece Top Mount Base
Free Shipping
/ncstar-marlin-lever/0xvODYSlxgWC76kQIrayEQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NcSTAR Marlin Lever Action Weaver Scope Mount One-Piece Top Mount Base - MMLIN Marlin lever action weaver style rail- bolts directly to pre-drilled tapped receiver Weight: 1.24 oz.Length:4.73
More

Talley Lightweight 2-Piece...

$44.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Marlin Models 336-1895 Matte Medium
+ $4.99 shipping
/talley-lightweight/gA3wlt0zlNtkXd9mojuFGw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

Lever Action Lever Scout...

$45.00
Brownells Lever Action Lever Scout Mount - Marlin 336 Scout Mount
+ $7.95 shipping
/lever-action-lever-scout/O-Z1uqQZjDT7mvloLXZkNg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94's with rear sight dovetail 4 forward of receiver. a Mfg: Xs Sight Systems SPECS: Aluminum, black, matte finish. 8 (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
More

Warne 1-Piece Tactical...

$106.99
MidwayUSA Warne 1-Piece Tactical Picatinny-Style 20 MOA Elevated Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/warne-1piece-tactical/FBRmXvl44sdfyq9afHscqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel bases from Warne are designed for the long range shooter. They have 20 MOA of elevation built in to help compensate for significant bullet drop at ranges past 1000 yards.Technical InformationMateri al: Steel Notes: Mounting Hardware Included This is a Picatinny rail base If the description lists 20 MOA, the base has an upward tilt machined into it, so that the scope will have 20 minutes of angle elevation over a standard base. This is intended for rifles that will be specifically set up for long-range shooting.
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
Free Shipping
/leupold-1piece-standard/0ll1Yd4Zr-i2u7QjcwjyxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Marlin 36, 336, 444, 1895, 9, 45, 922M Notes: Torx head screws and driver included.
More

Lever Action Lever Scout...

$45.00
Brownells Lever Action Lever Scout Mount - Marlin 1895 Scout Mount
+ $7.95 shipping
/lever-action-lever-scout/xKDw5H9qkj1retStXu7Dqw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94's with rear sight dovetail 4 forward of receiver. a Mfg: Xs Sight Systems SPECS: Aluminum, black, matte finish. 8 (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
More

Talley Lightweight 2-Piece...

$44.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Marlin Models 336-1895 Matte Medium
+ $4.99 shipping
/talley-lightweight/7802fCWNA1hO7bgzjEsXrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

Lever Action Lever Scout...

$45.00
Brownells Lever Action Lever Scout Mount - Marlin 1894 Scout Mount
+ $7.95 shipping
/lever-action-lever-scout/1THuOqae7RZf_DuDiB1MIQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94's with rear sight dovetail 4 forward of receiver. a Mfg: Xs Sight Systems SPECS: Aluminum, black, matte finish. 8 (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Marlin 1894 Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/euA02AAJXwCkd28PJOVJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel standard bases from Weaver feature rear mount windage adjustments, a positive locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Notes: Torx head screws and driver included.
More

Leupold 1-Piece man Scope...

$9.99
MidwayUSA Leupold 1-Piece man Scope Base Weaver-Style Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/leupold-1piece-man-scope/Ietn9B_oTj7XZlBULHA3XA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Leupold Rifleman scope mounts are precision- machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. With a black matte finish, these bases are an ideal match for the Rifleman scope and will work with any Weaver-Style rings.Technical InformationMateri al: Aluminum Style: Weaver Fits: Marlin Model 336 Notes: Allen Screws and wrench included
More

Millett 2-Piece Turn-In...

$10.94
MidwayUSA Millett 2-Piece Turn-In Standard Scope Base Winchester 70 and Marlin MR-7 Matte
+ $4.99 shipping
/millett-2piece-turnin/sDGwSqQj3VCOMRyfk56vOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Millett Turn-In Style bases are custom crafted in heat treated nickel steel and will accept all standard rings.Technical InformationMateri al: Steel Style: Standard Fits: Marlin MR-7 LA Right-handed Winchester Model 70 LA/SA Right-handed Notes: Mounting Hardware Included.
More

Leupold 1-Piece Quick-Release...

$59.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
Free Shipping
/leupold-1piece/EDbiOh6dGTKulO_wHdkKsg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included
More

Leupold 1-Piece Quick-Release...

$69.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Silver
Free Shipping
/leupold-1piece/_t88rAzXxnHCnW-kv_VFUQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin 917V Matte Medium
+ $4.99 shipping
/dnz-products-game-reaper/IIBCbqFBqdGyXqBVA3ctLA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Base features a lightweight, aluminum body with integral scope rings. This creates a solid mount that won't shift or loosen up, maintaining exact target alignment shot after shot. The traditional ring/base joint is eliminated, reducing the possibility of the scope shifting under the stress of recoil.Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Warne Maxima 2-Piece Steel...

$23.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Marlin 36, 336, 444, 1894, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/warne-maxima-2piece/c1b70dRrWcKI5WmA5Q2_XQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

DNZ Hunt Master 2-Piece Scope...

$69.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64, Marlin XL7, XS7 Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/srUhXefHCzczQO3yL3m8JA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .420 Medium: .545 High: .670 Notes Integral scope rings... Less
More

Warne M864/864m Two Piece...

$24.86
eBay Warne M864/864m Two Piece Bases Marlin Lever Actions Matte M864/864m
Free Shipping
/warne-m864864m-two-piece/QiVnqpBLa2ayqIM6NG59Uw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Home About Us Shipping Returns Contact Warne M864/864M Two Piece Bases Marlin Lever Actions Matte M864/864M Click to view full size Full Size Image Click to close full size. Warne M864/864M Two Piece Bases Marlin Lever Actions Matte M864/864M Maxima Steel Bases are precision CNC machined from solid steel and are held to very tight tolerances. The Maxima Steel Base design is modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available toda
More

Warne Maxima 1-Piece Aluminum...

$13.99
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/warne-maxima-1piece/DcI0hf6w9wsE3g1uhiJk4w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included
More

Warne Maxima 1-Piece Aluminum...

$16.99
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Silver
+ $4.99 shipping
/warne-maxima-1piece/iMhxHvUlNWcXiwW1WU-0zQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included
More

Warne Maxima 1-Piece Aluminum...

$16.99
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
+ $4.99 shipping
/warne-maxima-1piece/z3h1ECxgKAfTPEk3JTw_JQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Browning Pre-96 Lever Action Gloss
Free Shipping
/leupold-1piece-standard/8XAty7jbiXMoMXVXaLpxTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Browning Lever Action Notes: Torx heads and driver included.
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin 336, 1895 Silver High
+ $4.99 shipping
/dnz-products-game-reaper/Z393sS4cOMjhobtwJBJAVw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Base features a lightweight, aluminum body with integral scope rings. This creates a solid mount that won't shift or loosen up, maintaining exact target alignment shot after shot. The traditional ring/base joint is eliminated, reducing the possibility of the scope shifting under the stress of recoil.Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

DNZ Products Game Reaper...

$54.99
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin XL7 Matte Medium
+ $4.99 shipping
/dnz-products-game-reaper/cOPoVMTYUtBj8nsfvssmYQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
DNZ Products Game Reaper ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the firearm and scope. Game Reapers are made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212