Marlin 1894 Stock Electronics Optics Accessories - Shopping.com

Category

Optics Accessories

Narrow By...

Price Range
$ to $ Update
See Products from
Showing results for "marlin 1894 stock"
Results 1 - 40 of 112

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 1894 Matte
Free Shipping
/xs-lever-scout-scope/OP9yiUJHq3oLwzv3dH0BEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Note: Will not fit models with octagonal barrels. Matte black finish.Technical InformationMateri al: Anodized aluminumFinish: matte blackFeatures: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: NoNotes: Installs using rear dovetail and front receiver screw holes.
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Marlin 1894 Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/euA02AAJXwCkd28PJOVJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel standard bases from Weaver feature rear mount windage adjustments, a positive locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Notes: Torx head screws and driver included.
More

Power Custom Series 1 Stoning...

$24.99
MidwayUSA Power Custom Series 1 Stoning Fixture Adapter Marlin 336, 1894, 1895
+ $4.99 shipping
/power-custom-series-1/n8AXb19PVkwmub7nHp7sPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This fixture allows positioning of the sear or hammer at a precise angle for custom trigger pull adjustments. Once the part is in position, an Arkansas or India stone is set on top of the roller guide (included) to stone the mating surfaces on the hammer or sear. Fixture is drilled to hold six of the most common hammer and sear pins in the same alignment as they are in the gun, allowing the gunsmith to check sear engagement outside of the firearm. This fixture requires a different adapter for each firearm (sold separately). For best results, a small clamp can be used to hold the part against the fixture. Technical InformationMateri al:Polymer
More

Warne Maxima 2-Piece Steel...

$22.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Marlin 36, 336, 444, 1894, 1895, 9, 45, 922M Silver
+ $4.99 shipping
/warne-maxima-2piece/fdMjcRG2-tPYMr-BzS8YEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

Warne Maxima 2-Piece Steel...

$20.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Marlin 36, 336, 444, 1894, 1895, 9, 45, 922M Gloss
+ $4.99 shipping
/warne-maxima-2piece/oNCSstqp-gr1z9hT6ftXmw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

Wild West Guns Marlin...

$32.99
Brownells Wild West Guns Marlin 1895/336/444 Bear-Proof Ejector - Blued Bear Proof Ejector
+ $7.95 shipping
/wild-west-guns-marlin/WSghTkEOm9h2tHWhGR_6Kw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EDM-cut, one-piece ejector gives positive, reliable ejection with the heaviest hunting loads. Replaces the lighter, and easily broken, two-piece, factory part. Prevents broken parts from jamming action. Improves ejection, ensures empties are thrown clear of the receiver. A real life saver when hunting dangerous game in adverse conditions. Fits all modern Marlin center fire rifles 1895, 1895G, 1895GS,1895M, 450M, 444, 336 and 1894 models. Drop-in fit; gunsmith installation is recommended. Mfg: Wild West Guns SPECS: Spring steel, blue or nickel plated, silver finish. Tempered and heat treated.
More

Wild West Guns Marlin...

$32.99
Brownells Wild West Guns Marlin 1895/336/444 Bear-Proof Ejector - Nickel Bear Proof Ejector
+ $7.95 shipping
/wild-west-guns-marlin/fVDk3k4qCj4QF0ZPY_75Pg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EDM-cut, one-piece ejector gives positive, reliable ejection with the heaviest hunting loads. Replaces the lighter, and easily broken, two-piece, factory part. Prevents broken parts from jamming action. Improves ejection, ensures empties are thrown clear of the receiver. A real life saver when hunting dangerous game in adverse conditions. Fits all modern Marlin center fire rifles 1895, 1895G, 1895GS,1895M, 450M, 444, 336 and 1894 models. Drop-in fit; gunsmith installation is recommended. Mfg: Wild West Guns SPECS: Spring steel, blue or nickel plated, silver finish. Tempered and heat treated.
More

Marble's Improved Tang Peep...

$69.99
MidwayUSA Marble's Improved Tang Peep Sight Base Marlin 39A (Current Model), 1894 CB, Winchester 9422 22 Long Blue
+ $4.99 shipping
/marbles-improved-tang/MSBP7wYEcRk9Y6mj5mki_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Marble's Improved Tang Peep Sights are capable of satisfying the requirements of both short and long range shooters. The sight's modular base may be permanently attached to a rifle's tang, and incorporates a setscrew to release the upright post/aperture combination for replacement with any of 4 incrementally taller upright posts, allowing for accurate target engagement up to 1000 yards when outfitted with the long range post option. CNC machined components guarantee that parts mate perfectly for repeatable accuracy. Sight includes a gun-specific modular sight base and an Allen wrench only. Upright posts (short-range, standard, mid-range or long-range) and different aperture sizes are available separately. NOTE: Requires the correct mounting screw set for use, an upright post and an... Less
More

Power Custom 1-Piece...

$48.99
MidwayUSA Power Custom 1-Piece Picatinny-Style Scope Base Marlin Camp Carbine Aluminum Silver
+ $4.99 shipping
/power-custom-1piece/5ePYtNhZ8fcWf6pbM0VS5g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesFully CNC machined from extruded aluminum for precision fittingAccepts most modern picatinny scope ringsIncludes 4 mounting screws and an allen wrench for installation. This Power Custom 1- Piece Picatinny Style Scope base is the perfect mount that you have been looking for for your marlin Camp Carbine in 9mm or .45. This is Fully CNC Machined from extruded aluminum and fully machined for precision fitting. Included are four mounting screws and an Allen wrench used to install. Accepts most modern Picatinny Style scope rings. Technical InformationMateri al: AluminumStyle: PicatinnyFits: Marlin Camp Carbine 9mm or.45Notes: Attaches to the factory pre-drilled and tapped holes in the Marlin Camp Carbine in 9mm or .45. Measures 5.325x..825x.465 Mounting hardware included.
More

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 444P, 1895 Matte
Free Shipping
/xs-lever-scout-scope/MLDrKIEo161ksPJWa3iWaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes.
More

EGW 1-Piece Picatinny-Style...

$35.99
MidwayUSA EGW 1-Piece Picatinny-Style Base Marlin 917, 982 Matte
+ $4.99 shipping
/egw-1piece/v9ySNExEe9yok4nVPKJCEg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny-style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny Fits: Marlin 917, 982 Notes: Mounting Hardware Included
More

Egw Marlin 1895, 336, 444...

$29.99
Brownells Egw Marlin 1895, 336, 444 Scope Bases - Marlin 1895, 336, 444 0 Moa
+ $7.95 shipping
/egw-marlin-1895-336-444/U_-9894FXYrUDepv-25MMQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Marlin 1895, 336, 444 Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrench. EGW recomme Mfg: Egw
More

EGW 1-Piece Picatinny-Style...

$26.39
MidwayUSA EGW 1-Piece Picatinny-Style Base Marlin 336, 1895 Matte
+ $4.99 shipping
/egw-1piece/RPksur_jjOq3h8_cT_gYGQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny/Weaver Fits: Marlin 336 and 1895 Notes: Mounting Hardware Included
More

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 336 Matte
Free Shipping
/xs-lever-scout-scope/W90_IYqGdSCTWAyTH3Jlyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes.
More

Ironsighter 2-Piece...

$19.99
MidwayUSA Ironsighter 2-Piece Weaver-Style Scope Base Marlin 336, 444, 45-70, 922M with 1 Weaver-Style Rings Medium Matte
+ $4.99 shipping
/ironsighter-2piece/e27kvLinLTp9rfKcMm9pjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

Wood Plus Marlin 336 Stock...

$54.99
Brownells Wood Plus Marlin 336 Stock Fixed Oem - Marlin 336 Stock Fixed Oem Brown
+ $7.95 shipping
/wood-plus-marlin-336/E7bfcTUgM7nmtXGnNBL-EQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish. Mfg: Wood Plus SPECS: Walnut, straight grain, no figure. Accepts original hardware. Win. 94 Pre '64 fits carbine models.
More

Wood Plus Marlin 336 Stock...

$72.99
Brownells Wood Plus Marlin 336 Stock Fixed Oem - Marlin 336 Stock Fixed Oem Brown
+ $7.95 shipping
/wood-plus-marlin-336/g8SstaoHx2rfzOEC7Jlk3g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Classic walnut, finish sanded, and given a three-coat, Danish oil finish. Provides a good, serviceable replacement for the factory stock. Offers excellent weather resistance, plus easy touch-up of dings or nicks. Quality wood, has a straight grain pattern. 95% inletted, ready to install; only minor fitting required to fit to your action. Mfg: Wood Plus SPECS: Walnut, straight grain, no figure. May not accept original hardware without fitting.
More

EGW 1-Piece Picatinny-Style...

$35.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Marlin 917, 982 Matte
+ $4.99 shipping
/egw-1piece/NQJxxUqgkK32qaSi0KNOWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Notes: Mounting Hardware Included
More

Xs Sight Systems Lever Action...

$45.00
Brownells Xs Sight Systems Lever Action Lever Scout Mount - Marlin 1894 Scout Mount
+ $7.95 shipping
/xs-sight-systems-lever/1THuOqae7RZf_DuDiB1MIQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94's with rear sight dovetail 4 forward of receiver. a Mfg: Xs Sight Systems SPECS: Aluminum, black, matte finish. 8 (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
More

Talley 1 Ring Mounts Marlin...

$49.99
MidwayUSA Talley 1 Ring Mounts Marlin 882, 917 Matte Medium
+ $4.99 shipping
/talley-1-ring-mounts/7MwWZhYu6sZzY4Rp8Wz02g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the gun and scope.Technical InformationMateri al: Steel Ring Height: .500 from bottom of ring opening to rifle receiver Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Marlin Scope Mount Dummy Screw

$2.99
Brownells Marlin Scope Mount Dummy Screw
+ $7.95 shipping
/marlin-scope-mount-dummy/Fwq-L1VWcxuRJp_2JNjKTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
SCOPE MOUNT DUMMY SCREW Mfg: Marlin
More

Marlin Scope Mount Dummy Screw

$3.99
Brownells Marlin Scope Mount Dummy Screw
+ $7.95 shipping
/marlin-scope-mount-dummy/wH-noIgOX13NqfvGV3fUFg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
SCOPE MOUNT DUMMY SCREW Mfg: Marlin
More

Weaver 1 Steel Lock See-Thru...

$13.99
MidwayUSA Weaver 1 Steel Lock See-Thru Ring Mount Marlin 336 Black
+ $4.99 shipping
/weaver-1-steel-lock/rKUwjdJb4ONEawiqvDIRrg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These rings let you choose between a quick iron sight shot or using the scope. For 1 scope tubes only. No base is required. This mount will position the scope about 7/8 above the receiver. Technical InformationMateri al: Aluminum Style: Integral Mount Ring Diameter: 1 Ring Height: Scope is raised 7/8 above receiver to allow use of iron sights. Fits the following models: Marlin Lever Actions: Models 9, 36, 45, 62, 93, 336, 375, 444, 1893, 1894 and 1895. Glenfield 30 Zane Grey
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/talley-2piece-scope-base/Yk3sInjpnEkXp0lzzTelRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Marlin 336 Notes: Mounting hardware included.
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
Free Shipping
/leupold-1piece-standard/0ll1Yd4Zr-i2u7QjcwjyxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Marlin 36, 336, 444, 1895, 9, 45, 922M Notes: Torx head screws and driver included.
More

Palo Verde Gunworks Marlin...

$21.99
Brownells Palo Verde Gunworks Marlin Lever Action Spring Kit - Marlin Spring Kit
+ $7.95 shipping
/palo-verde-gunworks/cqFfMz4U9OSNrP9dMcbIWA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-install components let you fine-tune your Marlin lever gun for a smoother- operating action and more consistent trigger pull without making permanent alterations to the rifle. Simply replace the factory hammer spring and lever-plunger spring with the springs from the kit, then use the color-coded nylon bushings and adjustment washers to select one of seven hammer spring tension settings. The difference between each setting is about 8%, so you can get the hammer spring tension that suits you best simply by choosing the right combination of bushings and washers. Tough, friction- reducing nylon bushings keep hammer spring aligned and prevent it from crawling over the front of the strut or Mfg: Palo Verde Gunworks SPECS: Zinc-coated steel springs, nylon bushings/washers. Kit contains... Less
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
+ $4.99 shipping
/weaver-1piece-grand-slam/5faUmkspNCV29r0LjltNGA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These all-steel bases from Weaver feature rear mount windage adjustments, a positive dovetail locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Fits: Marlin 336 Notes: Torx heads and driver included.
More

Leupold 1-Piece Quick-Release...

$59.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
Free Shipping
/leupold-1piece/EDbiOh6dGTKulO_wHdkKsg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included
More

Brownells Lever Action Spring...

$16.99
Brownells Brownells Lever Action Spring Kit For Marlin Lever Action - Lever Action Spring Kit
+ $7.95 shipping
/brownells-lever-action/lUcVTs9nhmr2ILRu0oicbg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality, reduced power springs give the Cowboy Action shooter the advantages of a light, crisp trigger pull while reducing the effort required to cycle the lever assembly. Reduced power hammer spring replaces the heavy factory spring for improved trigger pull. Light, lever latch spring reduces latch pressure and friction for fast, easy cycling and quick follow-up shots. Mfg: Brownells SPECS: Steel, natural finish. Hammer Spring - 1ΒΌ (3.8cm) long. Latch Spring - 13/16 (2.1cm) long. Fits Marlin 39A/444/94/95/336 Series rifles.
More

Leupold 1-Piece man Scope...

$9.99
MidwayUSA Leupold 1-Piece man Scope Base Weaver-Style Marlin 36, 336, 444, 1895, 9, 45, 922M Matte
Free Shipping
/leupold-1piece-man-scope/Ietn9B_oTj7XZlBULHA3XA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Leupold Rifleman scope mounts are precision- machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. With a black matte finish, these bases are an ideal match for the Rifleman scope and will work with any Weaver-Style rings.Technical InformationMateri al: Aluminum Style: Weaver Fits: Marlin Model 336 Notes: Allen Screws and wrench included
More

Leupold 1-Piece Quick-Release...

$69.99
MidwayUSA Leupold 1-Piece Quick-Release Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Silver
Free Shipping
/leupold-1piece/_t88rAzXxnHCnW-kv_VFUQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included
More

Burris FastFire Base Marlin...

$47.99
MidwayUSA Burris FastFire Base Marlin 336, 444, 1895 Matte
Free Shipping
/burris-fastfire-base/dGB6nCIMmpbLbc0Hj4pPmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Burris Fastfire Base is designed to allow for the use of a Burris Fastfire Sight on guns with the the appropriate rear sight cut. Mounts in place of the rear sight and is for use with the Burris Fastfire ONLY. Note: Ruger Mark I, II, III (119655) does not work with 22/45. Specifications: Material: Aluminum Color: Matte Black
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Marlin 336-1895 Matte Low
+ $4.99 shipping
/talley-lightweight/aKw5KcTy9AmyaCEQ9MgD3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Marlin Models 336-1895 Matte Medium
+ $4.99 shipping
/talley-lightweight/7802fCWNA1hO7bgzjEsXrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

DNZ Products Game Reaper...

$50.95
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin 917V Matte Medium
+ $4.99 shipping
/dnz-products-game-reaper/IIBCbqFBqdGyXqBVA3ctLA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Base features a lightweight, aluminum body with integral scope rings. This creates a solid mount that won't shift or loosen up, maintaining exact target alignment shot after shot. The traditional ring/base joint is eliminated, reducing the possibility of the scope shifting under the stress of recoil.Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Marlin Models 336-1895 Matte Low
+ $4.99 shipping
/talley-lightweight/MfFgR3CeuvG8KmLW-StZxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

DNZ Products Game Reaper...

$50.95
MidwayUSA DNZ Products Game Reaper 1-Piece Scope Base with 1 Integral Rings Marlin XL7 Matte Medium
+ $4.99 shipping
/dnz-products-game-reaper/cOPoVMTYUtBj8nsfvssmYQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
DNZ Products Game Reaper ring mounts attach directly to the receiver, offering a rock solid ring and base combination that eliminates any seams between the firearm and scope. Game Reapers are made from lightweight aluminum so they are 1/3 the weight of other mounting systems. Technical InformationMateri al: Aluminum, anodized Notes: Socket head cap screws included for mounting to firearm Each mount is specifically machined to fit the particular firearm Ring heights vary depending on the specific firearm and base machining. Please use the average height to select the correct height for mounting. Ring height (bottom of base to bottom of ring): Low, .437 to .500, average .469 Medium, .562 to .625, average .594 High, .687 to .750, average .719
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Marlin Models 336-1895 Matte Medium
+ $4.99 shipping
/talley-lightweight/gA3wlt0zlNtkXd9mojuFGw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .510Medium: .610 Notes:Includes attachment screws and allen wrench
More

Warne Maxima 2-Piece Steel...

$20.99
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Winchester 70, Marlin XL-7 Gloss
+ $4.99 shipping
/warne-maxima-2piece/wZPdwjvPYib-oK0DyijAFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These sturdy bases are machined from solid steel and feature a cross cut Weaver-Style that handles even the heaviest magnums. Technical InformationNotes: High-tensile steel Torx screws included
More

Warne Maxima 1-Piece Aluminum...

$14.99
MidwayUSA Warne Maxima 1-Piece Aluminum Weaver-Style Scope Base Marlin 36, 336, 444, 1895, 9, 45, 922M Gloss
+ $4.99 shipping
/warne-maxima-1piece/z3h1ECxgKAfTPEk3JTw_JQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Please see item description Notes: Mounting Hardware Included
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410