Category

Sport and Outdoor
Showing results for "m1 carbine"
Results 1 - 40 of 557

M1 Carbine Rear Aperture...

$26.99
Brownells M1 Carbine Rear Aperture Sight - Rear Aperture Sight
+ $7.95 shipping
/m1-carbine-rear-aperture/T0eUBsRSTd2P1A-cia71Aw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Modern, high-quality reproduction of the original rear sight makes restoring your M1 carbine easier and the final job look authentic. Patterned after the factory rear sight using modern CAD/CAM design techniques and wire EDM cut from 4140 bar stock for tight tolerances. Features audible clicks for precise windage adjustment and preset range increments for elevation adjustment. Mfg: Kensight Mfg. SPECS: Steel, blued, matte finish. Fits M1 Carbine.
More

Kahr M-1 Carbine .30 Carbine...

$39.99
Academy Sports and Outdoors Kahr M-1 Carbine .30 Carbine 10-Round Replacement Magazine
Free Shipping
/kahr-m1-carbine-30/-yHoMuclNFUlcGJOLbrHgw==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Kahr M-1 Carbine .30 Carbine 10-Round Replacement Magazine is made of steel and features a detachable design.
More

Kahr Auto Ordnance M-1...

$39.99
Academy Sports and Outdoors Kahr Auto Ordnance M-1 Carbine .30 Carbine 15-Round Replacement Magazine
Free Shipping
/kahr-auto-ordnance-m1/TjOzxyq_XbHc7ablApY8tQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Kahr Auto Ordnance M-1 Carbine .30 Carbine 15-Round Replacement Magazine is made of steel and features a detachable design.
More

Redding Trim Die 30 Carbine

$31.29
MidwayUSA Redding Trim Die 30 Carbine
+ $4.99 shipping
/redding-trim-die-30/6lcJq_EfREarHrcVm-jlxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

M1 Carbine Rubber Dust Cover...

$5.95
eBay M1 Carbine Rubber Dust Cover Set Of 10 Pieces
+ $3.02 shipping
/m1-carbine-rubber-dust/lMGMkHK2Iym5u21TvlxpPg==/info
eBay
IN_STOCK ( In stock )
M1 CARBINE US GI WWII RUBBER DUST COVER. SET OF 10 PIECES. NEW OLD STOCK.
More

Lyman Neck Expander M Die 30...

$21.99
MidwayUSA Lyman Neck Expander M Die 30 Carbine
+ $4.99 shipping
/lyman-neck-expander-m-die/iLd0UNrgoqHN8f_0R9xsFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating.
More

Carbine H2 Heavy Buffer -...

$43.99
Brownells Carbine H2 Heavy Buffer - Carbine H3 Heavy Buffer
+ $7.95 shipping
/carbine-h2-heavy-buffer/de_PKWzfQllCLuF7QXhIQw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features: Weighs 4.6 oz Contains two tungsten weights and one steel weight Standard carbine length buffer Aluminum exterior Fits AR-15 and M16 carbine buffer tubes Use with standard AR-15/M16 carbine buffer springs H3 is 5.4 oz Benefits: Increased weight allows for more reliable function in rifles with shorter gas systems Heavier weight reduces bolt bounce in full auto fire Increased weight also softens recoil 4.6 oz weight also allows for a longer dwell time slowing down the cycling of the rifle H3 is 5.4 oz Mfg: Colt
More

Tippmann M4 Carbine Deluxe...

$49.95
ANSgear Paintball Tippmann M4 Carbine Deluxe Parts Kit (T550008)
No Shipping Info
/tippmann-m4-carbine/JM7HLPpLux6xdVPjlfpXmw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
M4 Carbine Deluxe Parts Kit.Kit Includes the following parts:QTY Part No. Description 1 TA20065 Grease Pack 1 LUBE Oil Pack 1 98-12A O-ring, C.U., 90A, 2-019 2 TA50029 Pin Detent 2 TA20049 O-Ring, C.U., 70A, 2-006 2 TA30049 O-Ring, C.U., 70A, 2-008 2 TA20096 .150 I.D. X 0.037 C.S., O-Ring, C.U., 70A 1 TA50139 10-32 x 3/16 LONG BHSCS 1 TA50095 SHCS #6-32 X 1/4 2 TA50128 Spring, Comp., 0.750 F.L. X 0.084 O.D. 1 TA20073 Quick Fill Nipple 1 TA50141 Locking Tab For Input Fitting 1 TA50236 Puncture Valve Gas Line Plug Complete 1 TA50133 #8-32 X... Less
More

RCBS 3-Die Set 30 Carbine

$39.49
MidwayUSA RCBS 3-Die Set 30 Carbine
+ $7.59 shipping
/rcbs-3die-set-30-carbine/3sGOF0sLnjZJMM2d76z5HA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

Carbine, Caliber .30, M1...

$7.75
eBay Carbine, Caliber .30, M1 Technical Bulletin Manual - Tb 23-7-1
Free Shipping
/carbine-caliber-30-m1/uikYrbtmkSIEiKwb38AnHw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Store Home |Contact Us |Size Charts |Frequently Asked Questions |About Us |||||||| Carbine, Caliber .30, M1 Technical Bulletin Manual - TB 23-7-1 WE ARE AN AUTHORIZED SELLER OF THIS PRODUCT. PURCHASE WITH FULL CONFIDENCE. OFFICIAL MILITARY.FOR OFFICIAL RE-SALE.Tb23-7-1 Ordnance Field Service Technical Bulletin No.--Carbine, Cal.30, M1.Ordnance Field Service Technical Bulletin No. 23-7-1.March 17, 1942. There Is No Additional Information At This Time.We accept PayPal and all major credit cards. P
More

Carbine H2 Heavy Buffer

$37.99
Brownells Carbine H2 Heavy Buffer
+ $7.95 shipping
/carbine-h2-heavy-buffer/pwUdz3iumDBWC6lvqSojWw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features: Weighs 4.6 oz Contains two tungsten weights and one steel weight Standard carbine length buffer Aluminum exterior Fits AR-15 and M16 carbine buffer tubes Use with standard AR-15/M16 carbine buffer springs H3 is 5.4 oz Benefits: Increased weight allows for more reliable function in rifles with shorter gas systems Heavier weight reduces bolt bounce in full auto fire Increased weight also softens recoil 4.6 oz weight also allows for a longer dwell time slowing down the cycling of the rifle H3 is 5.4 oz Mfg: Colt
More

RCBS Trim Die 30 Carbine

$30.49
MidwayUSA RCBS Trim Die 30 Carbine
+ $4.99 shipping
/rcbs-trim-die-30-carbine/8hYnO2Myi8BBtO--IuD-nQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Lee Quick Trim Die 30 Carbine

$9.99
MidwayUSA Lee Quick Trim Die 30 Carbine
+ $4.99 shipping
/lee-quick-trim-die-30/n7_9r5uyTQTEmkvW5rgOhw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

M1 Carbine Do Everything...

$10.00
eBay M1 Carbine Do Everything Manual Assembly Disassembly Care Book
Free Shipping
/m1-carbine-do-everything/N7atOb8Dp_3_gpI_9pntxg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
M1 Carbine Do Everything Manual M1 Carbine Do Everything Manual This manual covers:Magazine Accessories Stock Trigger Housing Ammunition Barrel-Receiver Bolt Safety Check and Storage This manual is published by JEM Enterprises.The original publisher of the manual was M M Engineering.The book was written by Michael A. Pugliese of M M Engineering, a famous author who has been writing manuals on proper gun care and maintenance for over 20 years.This manual was written so that anyone can understand
More

M1 CARBINE 30 CAR BL 10RD...

$19.75
Daniel Outdoors M1 CARBINE 30 CAR BL 10RD MAGAZINE
+ $5.99 shipping
/m1-carbine-30-car-bl-10rd/wOBkVRJ7HRqKHisxWTZ8RQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
M1 Carbine Magazine - .30 Carbine - 10 round - Steel - BlueBody and follower constructed of blued, heat-treated steelHeat- treated Chrome-silicon wire spring ensures reliable feeding and functionFits all Mil-Spec, and most civilian carbines
More

M1 Carbine Butt Plate - Et82

$6.00
eBay M1 Carbine Butt Plate - Et82
+ $3.99 shipping
/m1-carbine-butt-plate/8UJNTU1SmRQaYxqAid5dyQ==/info
eBay
IN_STOCK ( In stock )
You Are Bidding One ( 1 ) M1Carbine Butt Plate, This are not usgi, Condition New, Perfect for Replacement Part. Auction Is For The Actual Part Shown In The Image(s). NO INTERNATIONAL SHIPPING.
More

AimShot 40 S&W Arbor for 30...

$9.99
MidwayUSA AimShot 40 S&W Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-40-sw-arbor-for/DcIIj6MYpD0_KynhCx4Yqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Tippmann M4 Carbine Basic...

$9.95
ANSgear Paintball Tippmann M4 Carbine Basic Parts Kit (T550007)
No Shipping Info
/tippmann-m4-carbine-basic/OTLMiDsMZWWq_8Uk-fwT4Q==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
M4 Carbine Basic Parts Kit.Kit includes the following parts.QTY Part No. Description 1 TA20065 Grease Pack1 LUBE Oil Pack1 98-12A O-ring, C.U., 90A, 2- 0192 TA50029 Pin Detent2 TA20049 O-Ring, C.U., 70A, 2- 0062 TA30049 O-Ring, C.U., 70A, 2- 0082 TA20096 .150 I.D. X 0.037 C.S., O-Ring, C.U., 70A1 TA50139 10-32 x 3/16 LONG BHSCS1 TA50095 SHCS #6-32 X 1/41 TA50110 H.U. Pusher1 TA50146 Front Bolt Spring1 TA50014 H.U. Bucking
More

AimShot 44 S&W Arbor for 30...

$9.99
MidwayUSA AimShot 44 S&W Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-44-sw-arbor-for/f2_IBtPvtovDZnVK7_DrZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

M1 Carbine Wood Hand Guard...

$24.95
eBay M1 Carbine Wood Hand Guard Birch,
No Shipping Info
/m1-carbine-wood-hand/yjaIIPwbuMoklv2Jvh7mNA==/info
eBay
IN_STOCK ( In stock )
New M1 Carbine USGI birch hand guard, Post world war two. Wood grain will vary from picture. No two pieces of wood are exactly the same. This is a USGI government part. If you intend to use this on a Chinese stock it may not work. Please feel free to contact me for any other info.
More

AimShot 45 ACP Arbor for 30...

$9.99
MidwayUSA AimShot 45 ACP Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-45-acp-arbor-for/hxn-lWC1eJRQVrhhSzGNkg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Buffers - Carbine Buffer

$31.99
Brownells Buffers - Carbine Buffer
+ $7.95 shipping
/buffers-carbine-buffer/IF3rWSoeckftPm66dLd0sA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Genuine DPMS factory parts will help you repair an existing rifle or correctly install a stock to a custom build. Buffers and springs are weighted to function properly in DPMS LR-308 and Remington R-25 rifles. Rifle Buffer fits buffer tube for fixed, A2-type rifle stock; will not work in carbine tube. Mfg: Dpms SPECS: Carbine Buffer Steel body. 2 long, 3.7oz. wt. Rifle buffer Aluminum body. 4-7⁄8 long.
More

Lee Carbide 3-Die Set 30...

$39.99
MidwayUSA Lee Carbide 3-Die Set 30 Carbine
+ $7.59 shipping
/lee-carbide-3die-set-30/2gMxdrQv6X7kfnUoB9xbSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

M1 Carbine Part - M1 Carbine...

$7.00
eBay M1 Carbine Part - M1 Carbine Ejector Assembly - Surplus - Et11
+ $2.95 shipping
/m1-carbine-part-m1/xMzPEbn_wHuGqRJ-r_jYFQ==/info
eBay
IN_STOCK ( In stock )
You are Bidding One New Original USGI M1 Carbine Ejector Assembly, Out Of This Package.**** No International Shipping ****
More

RCBS Extended Shellholder #17...

$28.49
MidwayUSA RCBS Extended Shellholder #17 (30 Carbine, 32 ACP)
+ $4.99 shipping
/rcbs-extended-shellholder/FXfKDyihi9N1dic9Mcbs7A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for working short cases. Perfect for using the RCBS Competition Seating Die or Trim Die. Works for single stage presses only.Technical InformationMateri al: Steel Fits: 30 Carbine 32 ACP Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

Redding Taper Crimp Die 30...

$28.49
MidwayUSA Redding Taper Crimp Die 30 Carbine
+ $4.99 shipping
/redding-taper-crimp-die/qPv48SH5Bz0N0d7ogEYd2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

.30 M1 Carbine Sling And...

$16.99
eBay .30 M1 Carbine Sling And Oiler. Reproduction. Green Canvas. Ships Free
Free Shipping
/30-m1-carbine-sling-and/ooozCsNGwA9-peDwL3ZRUg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
These are brand new reproduction M1carbine slings with the oiler. The slings are made of cotton canvas an the oiler is blued steel. No markings on the oiler. These are a reproduction of the military M1 carbine sling and oiler. Free same day shipping if you order before 1PM central time. If you have any questions feel free to call me. 256 263 7291 Corey
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 30 Carbine
+ $4.99 shipping
/lee-powder-through/qvvjW8a3XSZfgQH--ZZUUg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

B5 KeyMod Carbine-Length Hand...

$29.99
Academy Sports and Outdoors B5 KeyMod Carbine-Length Hand Guard
Free Shipping
/b5-keymod-carbinelength/8nKOQvuEF1yfyUoKzc4omQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The B5 KeyMod Carbine-Length Hand Guard features composite construction and a stamped-metal heat shield.
More

RCBS Sizer Die 30 Carbine

$23.29
MidwayUSA RCBS Sizer Die 30 Carbine
+ $4.99 shipping
/rcbs-sizer-die-30-carbine/xL3_hZSP3a0DGeNCYFCf3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These dies size the entire length of the case. Steel dies require the application of sizing lube to prevent damage to the case or it sticking in the die.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Expander- Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case. NOT Carbide.
More

M1 Carbine - 1 Black Rubber...

$6.29
eBay M1 Carbine - 1 Black Rubber Recoil Buttpad Butt Pad Butt Plate - Free Shippin
Free Shipping
/m1-carbine-1-black/mzTcIUTIBdcusqoDY0Egvg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
M1 Carbine Rubber Butt Pad This new butt pad adds 1 of length to all versions of the M1 carbine.Provides nonslip surface for accurate fast shooting. Installation uses the original butt plate screw and requires no fitting.Leave original steel plate on stock.Free Shipping to the USA
More

Lee Factory Crimp Die 30...

$13.99
MidwayUSA Lee Factory Crimp Die 30 Carbine
+ $4.99 shipping
/lee-factory-crimp-die-30/yRtYhu6KSLHT7RjzdSJQig==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

M1 CARBINE 30 CAR BL 30RD...

$24.99
Daniel Outdoors M1 CARBINE 30 CAR BL 30RD MAGAZINE
+ $5.99 shipping
/m1-carbine-30-car-bl-30rd/_ynHRHnzpe5zTS6KEBpB4w==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
M1 Carbine Magazine - .30 Carbine - 15 round - Steel - BlueBody and follower constructed of blued, heat-treated steelHeat- treated Chrome-silicon wire spring ensures reliable feeding and functionFits all Mil-Spec, and most civilian carbinesThe famous \Banana Clip\Notice: Due to state laws
More

M1 Carbine Vise Block Tool...

$11.95
eBay M1 Carbine Vise Block Tool Won't Mar
+ $1.90 shipping
/m1-carbine-vise-block/Mk0hITWQf-MqgHNv0WZM9g==/info
eBay
IN_STOCK ( In stock )
This is a handy way to hold your carbine, especially for working on the front sight. You do not have to remove the receiver to use it. There is a short video on it below.Made in USA Will work on USGI M1 carbines but not on the Universal Brand Carbine. Please check out our other auctions. Shipping: All orders are shipped USPS in a padded envelope with delivery confirmation.
More

Uncle Mike's Quick Detachable...

$12.99
MidwayUSA Uncle Mike's Quick Detachable Auto, Single Shot Ruger Carbine Sling Swivels 1 Black
+ $4.99 shipping
/uncle-mikes-quick/THudSvE44F1PxbaGWBZ8ag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The unique Quick Detachable (QD) design stops the metal swivel body from contacting the gun. The close machining tolerances provide smooth and silent operation. Super Swivels do not include studs. All others include studs or barrel bands, depending on type. Notes: Forend adapter with stud installes in the barrel band of gun Fits: Ruger (10/22, 44 Magnum, and number 3 carbines) Includes: 1-forend adapter with stud, 1-wood screw (1/2) for optional forend stud mounting, 1-wood screw rear stud, and 2-qd swivels for 1 slings
More

M1 Carbine M8 Cleaning Rod...

$14.50
eBay M1 Carbine M8 Cleaning Rod Set With Tip
+ $6.80 shipping
/m1-carbine-m8-cleaning/wJmSvvMhuv3_9bfymPESlg==/info
eBay
IN_STOCK ( In stock )
US GI WWII M8 CLEANING ROD SET WITH BRASS TIP, STEEL HANDLE. NEW CONDITION STILL IN ORIGINAL GREASE.
More

Panteao Make Ready with Bill...

$19.99
Walmart.com Panteao Make Ready with Bill Rogers: Reactive Carbine Video
+ $4.97 shipping
/panteao-make-ready-with/Quy0RlRQVVilNEX9yYSPYQ==/info
Walmart.com
IN_STOCK ( In stock )
We apologize for the inconvenience, but at this time we are unable to export this product outside of the USA.The Panteao Make Ready with Bill Rogers: Reactive Carbine Shooting DVD takes you to the Rogers Shooting School in Ellijay, GA for a one-on-one private training session with Bill Rogers. Bill is a former FBI Agent and inventor of the first Kydex Holster in 1972. He started the Rogers Holster Company in 1973, purchased by Safariland in 1985. To this day he continues to develop cutting edge technologies for the shooting industry. Bill developed a training program and a high speed moving target system. The program replicates the minimal amount of time a shooter will have to successfully neutralize an adversary. Reactive Carbine takes you through carbine setup, proper stance and grip,... Less
More

M-1 Carbine Manual

$9.99
eBay M-1 Carbine Manual
+ $2.64 shipping
/m1-carbine-manual/5fUHNIdcoOXzQ8uV2PU1uA==/info
eBay
IN_STOCK ( In stock )
Reprint manual from 1942. Chapters include operation and functionin, disassembly and assembly, care, cleaning, and lubrication, immediate action and stoppages, organization spare parts and accessories, ammunition, and material affection by gas.TB 23-7-1 Pages: 67
More

AimShot 44 Remington Magnum...

$9.99
MidwayUSA AimShot 44 Remington Magnum Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-44-remington/G1PvoYeyo6VXYEy8fdNJHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Slumberjack Carbine 2500...

$199.95
eBags.com Slumberjack Carbine 2500 Hiking Backpack Kryptek Highlander - Slumberjack Backpacking Packs
Free Shipping
/slumberjack-carbine-2500/Bx_ov1NToud-9SMJb4rKKw==/info
eBags.com
IN_STOCK ( In stock )
Free Shipping
Carbine 2500 Hiking Backpack Kryptek Highlander. Comfortable and versatile, the fully-featured Carbine 2500 is ideal for all day or minimalist overnight deer and small game hunts
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335