lot apv heat exchanger

SquareTrade AP6.0 VERY NICE APV CREPACO INC 316 STAINLESS STEEL HEAT EXCHANGER MODEL SR25S Prev Stop Play Next SquareTrade copy; AP6.0 You are bidding on a n APV Crepaco Heat Exchanger, Model: SR25S.This is a brand new unit in the crate and it is fully guaranteed. Saline Solution: 130 GPM Hot Water: 20 GPM Max Operating Pressure 100 psi 316 Stainless 2-1/2 Connections We will be happy to load your truck at no charge, or we can assist in planning the most economical delivery. Any questions? Email

Heat Exchanger, Shell and Tube, Max. BtuH 2, 750, 000 Water to Water Application, Max. BtuH 400, 000 Oil to Water Application, Shell 225 psig, Tube 150 psig Pressure, Temp. 450 F, Construction Material 316 Stainless Steel, Connection Shell 3 In NPT, Tube 2 In NPT, Capacity Shell 140, Tube 105 GPM, Height 11 In., Length 42.625 In., Width 10.5 In. Shell and Tube Heat Exchangers316 Stainless SteelMax. working pressure: shell side 225 psi; tube side 150 psi Max. temp.: shell side 425 F; tube side 425 F

Heat Exchanger Tube Cleaner, Electric, 1/2 HP, 115/1 Volts/Phase, Amps AC 9, Plug Type 5-15P, 168 Usable Hours per Week, Net Weight 31 Lbs, Includes Foot Switch, (Flexible Shaft Sold Separately) RestrictionsCalif ornia Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Heat Exchanger Tube CleanerRotating flexible shaft with water flush quickly removes deposits from straight heat exchanger tubes. Rotation is reversible to clean internally enhanced tubes.Condenser Cleaning Tools1/2 HP

Approx. 42L. 297319400 replaces 216751100 and 216666100.

We Give You The Lowest Prices On Freezer Parts. Order Today, Ships Today.

Cut down on ice machine operation costs and put waste water to good use with this ICE-1800 heat exchanger! Designed to be used with ice machines that produce over 1000 lbs. of ice per day, this unit directs cold waste water from your ice machine down a counter flow tube and into a cold waste water reservoir. Fresh, potable water enters this reservoir through a winding stainless steel tube, absorbing the cold from the waste water without mixing the two sources. Since the water is already cold when it reaches your ice machine, you will experience greater energy savings and ice production, while running shorter compressor cycles! Please consult the Specification Sheet for additional details and installation requirements. Overall Dimensions: Left to Right: 5 1/2 Front to Back: 5 1/2 Height:... Less

Approx 16 1/2 L x 11 1/2 W x 4 1/2 H.

The Enerpac submerged electric pump is best suited to power small to medium size cylinders, hydraulic tools or whenever a quiet, intermittent duty cycle is needed. A two speed operation reduces cycle times for improved productivity. Pump features include a powerful 0,37 kilo watt induction motor is submerged in the oil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise. A large 5,5 liters reservoir allows operation of a wide range of cylinders, and a 24 volts direct current remote pendant control is on certain models for safer operation. An externally adjustable relief valve allows control of operating pressure without opening the pump. A 40 micron internal return line filter keeps oil clean, promoting longer pump life, and a full length... Less

Cut down on ice machine operation costs and put waste water to good use with this ICE-1000 heat exchanger! Designed to be used with ice machines that produce up to 1000 lbs. of ice per day, this unit directs cold waste water from your ice machine down a counter flow tube and into a cold waste water reservoir. Fresh, potable water enters this reservoir through a winding stainless steel tube, absorbing the cold from the waste water without mixing the two sources. Since the water is already cold when it reaches your ice machine, you will experience greater energy savings and ice production, while running shorter compressor cycles! Please consult the Specification Sheet for additional details and installation requirements. Overall Dimensions: Left to Right: 5 1/2 Front to Back: 5 1/2 Height:... Less

Whether your application is for Homecare or the Acute care setting we have the ventilator circuit or filter you need.50 Each / Case

APV SR6 40 x104 Stainless Heat Exchanger Repacement / Add On Plates w/ Gaskets Connection Diameter 4.0 Standard Gap Clip

Ice Boxes are water-cooled heat exchangers that can be used to cool the hot air generated by HID lighting systems in sealed hydroponic setups. With these systems, gardeners can do away with in and out ducting and keep everything but the water chiller inside the garden. Whether they're used for controlling the heat from lights or for replacing an air conditioner altogether, gardeners should see a significant drop in their cooling energy requirements. Because water can absorb heat 20 times faster than air, an Ice Box is typically twice as effi¬cient as air conditioners. Efficient use of an Ice Box heat exchanger requires an appropriate high-quality chiller, a 30-50 gallon reservoir, a properly-sized pump, Ice Boxes for each of your reflectors, quality tubing and miscellaneous plumbing... Less

GoldenFry Fryer, gas, 35 - 50 lb. fat capacity, electric snap action thermostat, spark igniter, stainless steel pot, front & sides, cross-fire burners, open vat, copper flashed heat exchangers, under fryer filter, 111,000 BTU, NG ( Anets - MX14ESFF NG )

The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. Sizing is not just about the amount of plates, but also the area for heat transfer! The port size is important! Most furnaces use 1 tubing, so make sure you are not buying 3/4 ports. This will decrease water flow to the rest of your system. Make sure you properly size your heat exchanger. Here is a guide based on the larger 12 exchangers. 10 plates are used for domestic hot water or small in-floor heating applications of less than 1100 sq ft. These will work with the largest of domestic hot water systems and should never need to be larger unless you use your domestic hot water for more than 3 hours straight at one time. 20... Less

Cut down on ice machine operation costs and put waste water to good use with this ICE-S heat exchanger! Designed to be used with all flake or shaved ice machines, this unit directs cold waste water from your ice machine down a counter flow tube and into a cold waste water reservoir. Fresh, potable water enters this reservoir through a winding stainless steel tube, absorbing the cold from the waste water without mixing the two sources. Since the water is already cold when it reaches your ice machine, you will experience greater energy savings and ice production, while running shorter compressor cycles! Please consult the Specification Sheet for additional details and installation requirements. Overall Dimensions: Left to Right: 5 1/2 Front to Back: 5 1/2 Height: 18 Please Note: This... Less

Approx. 40L.

Quick Nautic Boiler B3 2512SL 6 Gallon 1200W w/Heat Exchanger**Casing in composite material and Tank in Aisi 316 stainless steelBenefit * High quality materials. * Heat exchanger with wide exchange surface. * Produces hot water from the electric element, that is fitted with an adjustable safety thermostat. * Relief / non-return vale that allows discharging of the water heater in case of disuse.The featuresThe heat exchanger used for Quick Nautic Boiler B3 is AISI 316L stainless steel. The heat exchange capacity is notably higher than that achieved from other manufactures.The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.The electrical heating element is made of Incoloy®.The thermal... Less

The Enerpac submerged electric pump is best suited to power small to medium size cylinders, hydraulic tools or whenever a quiet, intermittent duty cycle is needed. A two speed operation reduces cycle times for improved productivity. Pump features include a powerful 0,37 kilo watt induction motor is submerged in the oil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise. A large 5,5 liters reservoir allows operation of a wide range of cylinders, and a 24 volts direct current remote pendant control is on certain models for safer operation. An externally adjustable relief valve allows control of operating pressure without opening the pump. A 40 micron internal return line filter keeps oil clean, promoting longer pump life, and a full length... Less

The Enerpac submerged electric pump is best suited to power small to medium size cylinders, hydraulic tools or whenever a quiet, intermittent duty cycle is needed. A two speed operation reduces cycle times for improved productivity. Pump features include a powerful 0,37 kilo watt induction motor is submerged in the oil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise. A large 5,5 liters reservoir allows operation of a wide range of cylinders, and a 24 volts direct current remote pendant control is on certain models for safer operation. An externally adjustable relief valve allows control of operating pressure without opening the pump. A 40 micron internal return line filter keeps oil clean, promoting longer pump life, and a full length... Less

The Hayward HAXHXA1253 Heat Exchanger fits the 250K BTU Hayward H250 H-Series Induced Draft, ED2 and ED1 models. This is a factory original Hayward replacement part. Factory original Hayward replacement part Hayward part number HAXHXA1253 Heat Exchanger Assembly For H250 H-Series Heaters Fits Hayward H-Series Induced Draft H250 Fits Hayward H-Series ED2 H250 (H250ED2) Fits Hayward H-Series ED1 H250 (H250ED1)

Refrigerator Heat Exchanger - 2003003

Increase the efficiency of your MSR stove up to 25% with the MSR Heat Exchanger. MSR's waffled design channels heat from the stove up the sides of the pot, increasing the heated surface area of the pot. This means your water and food heat up faster, and you save fuel. Use the Heat Exchanger with all MSR 1.5- and 2-liter pots (with the exception of the Titan 1.5-liter).

The Enerpac submerged electric pump is best suited to power small to medium size cylinders, hydraulic tools or whenever a quiet, intermittent duty cycle is needed. A two speed operation reduces cycle times for improved productivity. Pump features include a powerful 0,37 kilo watt induction motor is submerged in the oil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise. A large 5,5 liters reservoir allows operation of a wide range of cylinders, and a 24 volts direct current remote pendant control is on certain models for safer operation. An externally adjustable relief valve allows control of operating pressure without opening the pump. A 40 micron internal return line filter keeps oil clean, promoting longer pump life, and a full length... Less

400,000 BTU Titanium Pool Heat Exchanger 1 1/4 FNPT Shell (Boiler) Side, 2 PVC Slip Union Tube (Pool) Side Removable titanium tube bundle heat transfer surface Integrated Thermostat Pocket Shell made of cast iron Tube side operating pressure 43.5 PSIG Shell side operating pressure 43.5 PSIG Operating temperature up to 120C Heat exchanger surface made of titanium Nominal heating capacities up to 400,000 btu/hr for pool applications (Up to a 40,000 gallon pool at a 1F/hr heat up rate) Eliminates the need for external bypass as the whole pool flow goes through the heat exchanger Diameter: 4.25 in., Overall Length: 22.44 in. *Highly recommended for use in saltwater swimming pools Covered by a Limited Lifetime Warranty against manufacturers defects

The Hayward Heat Exchanger Assembly is a replacement heat exchanger designed for Hayward H-250 pool and spa heaters, as well as Millivolt versions ED1 and ED2. To ensure all three versions are compatible with the Hayward Heat Exchanger Assembly H250, extra items have been included in this package for operational purposes. Please note, the tube bundle is not available as a separate item.Items Included with the Tube Bundle: (1) Complete front header mounted to tube bundle (includes plugs and high limits) (1) Straight pressure switch tube (1) Bent pressure switch tube (2) Brass nut and ferrule for pressure switch tube (2) O-ring for front header union connectors (2) Thermostat wells - 3-1/2 L x 5/16 ID (2) Thermostat wells - 3 L x 3/8 ID

Refrigerator Heat Exchanger - 216783200

Refrigerator Heat Exchanger - 5308000728