Category

Sport and Outdoor
Showing results for "lee precision"
Results 1 - 40 of 1500+

Lee Precision Load Master 40...

$384.00
Sears Lee Precision Load Master 40 S&W
+ $8.20 shipping
/lee-precision-load-master/CMRDOhQ_U2SdVhhGVI0N7w==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Load Master Kit includes dies (full length size, powder through expanding and bullet seating dies), turret, shell plate, and powder measure. case feeder and primer feed are included.
More

Lee Precision Classic Cast...

$170.00
Sears Lee Precision Classic Cast Press
+ $8.20 shipping
/lee-precision-classic/b9XcQnkx5vnCtn0_zybCpA==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Classic Cast Press is cast and machined with pride in the USA, baked powder finish and all steel linkage that makes this one of the most attractive and sturdy presses made. Spent primers are collected and drop into a flexible plastic tube for easy emptying. Accepts standard shell holders and ram insert can be rotated to allow primer installation on right tor left side. Includes two primer arms for large and small primers.
More

Lee Precision Pro 4-20 Pot

$69.99
Cabela's Lee Precision Pro 4-20 Pot
+ $10.95 shipping
/lee-precision-pro-420-pot/43AuB440ka6QI5h0b5JmQg==/info
Cabela's
IN_STOCK ( In stock )
Holds approximately 20 lbs. of lead. With 4 of clearance under the spout, all brands of bullet molds and most sinker molds will fit. Adjustable mold guide allows quick and accurate positioning. Features Lees patented, dependable high-efficiency remote sensing thermostat in a dust-tight housing. Long-life 700-watt tubular heating element assures quick melting and rapid recovery. Micro- adjustable, flow-control valve adjusts instantly with a twist. Front-mounted, low-maintenance, replaceable valve spout allows instant reseating. Cal/Gaug Pro 4-20. Sports and Outdoors > Sport and Outdoor
More

Lee Precision Classic Cast...

$107.87
eBay Deals Lee Precision Classic Cast Press Hunting 90998
Free Shipping
/lee-precision-classic/0BHBQkEpI6kb8OGa_XJLsA==/info
eBay Deals
IN_STOCK ( In stock )
Free Shipping
More

Lee Precision Classic Cast 50...

$263.21
Sears Lee Precision Classic Cast 50 BMG Press Kit
+ $8.20 shipping
/lee-precision-classic/TUp24njtSGYLNPjfT4aF0Q==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Classic Cast 50 BMG Press Kit includes everything you need to start reloading the 50 -- the Lee Classic Cast Press, set of 50 BMG dies, shell holder, ram prime tool and tube of case sizing lube. Kit also includes shell holder insert, large and small primer arms and die reducer bushing to accept standard 7/8-14 dies so you can load all your smaller cartridges. All this for less than what others charge for dies alone.
More

Lee Precision Anniversary...

$126.99
Walmart.com Lee Precision Anniversary Challenger Kit II
Free Shipping
/lee-precision-anniversary/IMGc0KqPpXopO0yeNKdqIg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Lee Precision II Anniversary Challenger Kit II has the Challenger Press at the heart of the kit, a strong O-frame press with a larger-than-averag e opening angled at 30 degrees for maximum hand clearance. Compound leverage easily performs full-length sizing on even the largest magnum cases. Features a built-in, easy-to-empty primer catcher. Complete powder-handling system, including the precise Perfect Powder Measure. Case preparation tools include a cutter and lock stud to trim cases, an inside/outside case mouth chamber tool, primer pocket cleaner and a tube of premium sizing lube. You also get two Breech Lock Quick Change Bushings. These bushings make changing dies a snap and accomplish the task in seconds. Once mounted on your die, you'll never have to adjust the die again unless... Less
More

Lee Precision Deluxe 4 Hole...

$140.51
Sears Lee Precision Deluxe 4 Hole Turret Press Kit
+ $8.20 shipping
/lee-precision-deluxe-4/izqHHCCxixmxTyavUN2q2w==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Deluxe 4 Hole Turret Press Kit is large enough to handle monster belted magnum rifle cases. This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour.
More

Lee Precision Pro 1000 38...

$280.00
Sears Lee Precision Pro 1000 38 Special
+ $8.20 shipping
/lee-precision-pro-1000-38/kQuuOkfkDD5OZBnjkTIoyA==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Pro 1000 38 Special is for 38 Special. Includes press, dies (full length size, powder through expanding and bullet seating dies), turret, #1 shell plate, Pro Auto-Disk powder measure, and a priming system.
More

Lee Precision Precision...

$125.00
Sears Lee Precision Precision Reloading Die Set 50 BMG
+ $6.95 shipping
/lee-precision-precision/FahINx3Xt6GbGIWd5nTuQQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Precision Reloading Die Set 50 BMG is used with the Classic Cast Press only. It Includes Full Length Sizing Die, Bullet Seating Die, and Instructions. The Die Set Does not include shell holder or powder dipper.
More

Lee Precision Pro 1000...

$178.06
Walmart.com Lee Precision Pro 1000 Handloading Press
Free Shipping
/lee-precision-pro-1000/VOp2S4MgCC5rfgPIVzx1Ww==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Lee Precision Pro 1000 features added safety, because primers and powder are fed only if a case is present. For fine adjustments or for experimenting, an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.
More

Lee Precision 4 Hole Turret...

$120.00
Sears Lee Precision 4 Hole Turret Press With Auto Index
+ $6.95 shipping
/lee-precision-4-hole/b5OaGzYLe5HMVThHAyEhnQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 4 Hole Turret Press with Auto Index has a proven design with compound leverage. No spring in this turret design. The turret is locked into a solid steel ring with big rifle bolt type lugs. Patented design puts the lugs on the circumference so there can be no tipping. The linkage is so powerful that the largest magnum cases are sized with ease. Effort required is so small that the usual heavy bench is not essential. The Lee Turret Press has built-in primer catcher, longer stroke, more hand clearance and a comfortable wood grip. The fourth hole in the turret allows you to install your Lee Factory Crimp Die or taper crimp die in the press. The auto index on the press is capable of loading cartridges with an overall length of 2.313 inches or less.
More

Lee Precision Pro 1000...

$187.99
Walmart.com Lee Precision Pro 1000 Handloading Press
Free Shipping
/lee-precision-pro-1000/aaYJDdG_FPAUsjtUwyalJw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Lee Precision Pro 1000 features added safety, because primers and powder are fed only if a case is present. For fine adjustments or for experimenting, an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.
More

Lee Precision Load Master 38...

$384.00
Sears Lee Precision Load Master 38 Special Reloading Pistol Kit
+ $8.20 shipping
/lee-precision-load-master/eUi4Yn953-1Dml_co6s7Jw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Load Master Kit includes dies (full length size, powder through expanding and bullet seating dies), turret, shell plate, and powder measure. case feeder and primer feed are included.
More

Lee Precision Safety Scale Red

$35.98
Sears Lee Precision Safety Scale Red
+ $6.95 shipping
/lee-precision-safety/6oyUMn_2Ww1nByEKa0z0mQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Safety Scale Red is reliable, and very accurate, beam is made from a tough Phenolic. Sensitive and readable to 1/20 grain.
More

Lee Precision Ii Anniversary...

$164.97
eBay Lee Precision Ii Anniversary Edition Challenger Pistol Reloader Press Kit Red
Free Shipping
/lee-precision-ii/TNkZYeVdMUzWRtuSOooAgg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision II Anniversary EDITION Challenger PISTOL RELOADER PRESS Kit Red Lee Precision II Anniversary Challenger Kit Red Item Condition Brand new, factory sealed Product Features Includes the Lee Safety Scale which is very sensitive Has a power funnel to fill the case A chamfer tool camfers the insdie and outside of thecase mouth Product Description At the heart of the Lee Precision Anniversary Challenger II Kit is the Challenger Press, a strong O-frame press with a larger-than-averag e ope
More

Lee Precision Pro Carrier #19...

$55.98
Sears Lee Precision Pro Carrier #19 Complete
+ $6.95 shipping
/lee-precision-pro-carrier/UuJAgfJpxFkYKkaxohBRYg==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Pro Carrier is used to change calibers on the Pro 1000. Pro Carrier includes carrier, shell plate, Auto Prime, case ejector, and auto index
More

Lee Precision Factory Crimp...

$13.26
Walmart.com Lee Precision Factory Crimp Die, 30/06
+ $4.97 shipping
/lee-precision-factory/lnh2kgDRq3D97F6GR-VuJQ==/info
Walmart.com
IN_STOCK ( In stock )
This Lee Precision Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets that have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
More

Lee Precision Magnum Melter

$82.00
Sears Lee Precision Magnum Melter
+ $8.20 shipping
/lee-precision-magnum/HUfw7vj7eRZJ43PU1m58Qw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Magnum Melter has a large 4 inch diameter pot allows easy access for the ladle caster. The melt time is less than 20 minutes with just 700 watts. The pot is capable of a 20 pound capacity for the longest casting session. Melter is capable of reaching 900 degrees Fahrenheit.
More

Lee Precision Pacesetter Dies...

$41.98
Sears Lee Precision Pacesetter Dies .308
+ $8.20 shipping
/lee-precision-pacesetter/2Oa8JiysPHUFAGVxWiEO1Q==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Pacesetter Dies includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions with Load Data.
More

Lee Precision 6 Cavity Mold 9...

$53.00
Sears Lee Precision 6 Cavity Mold 9 MM
+ $8.20 shipping
/lee-precision-6-cavity/6CIRvIt9vIn6bAs2_CHrlw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 6 Cavity Mold is machined from commercial quality aluminum and feature steel bushing and alignment pins. It is machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. It comes with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end.
More

Lee Precision Carbide 3 Die...

$42.98
Sears Lee Precision Carbide 3 Die Set 40 S&W
+ $8.20 shipping
/lee-precision-carbide-3/Fq3bTxlWiTEEexU8HNZB8g==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee Precision Classic Cast...

$209.60
Sears Marketplace Lee Precision Classic Cast Press (Red)
No Shipping Info
/lee-precision-classic/5k6pDz1DWid660jA5U9peQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Lee Precision Classic Cast Press (Red)
More

Lee Precision Carbide 3 Die...

$42.98
Sears Lee Precision Carbide 3 Die Set 10 MM
+ $8.20 shipping
/lee-precision-carbide-3/i3X8ieeUukd-puQExOYe6w==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee Precision 50th...

$111.11
eBay Lee Precision 50th Anniversary Reloading Kit
+ $12.40 shipping
/lee-precision-50th/OfDsYLTgb29DD88KPA8ZqA==/info
eBay
IN_STOCK ( In stock )
This is a new in box Lee Precision 50 th Anniversary Reloading kit. Comes with all of the original stuff. Below is manufacturer’s description: At the heart of the Lee Precision Anniversary Challenger Kit is the Challenger Press, a strong O-frame press with a larger-than-averag e opening angled at 30° for maximum hand clearance. Compound leverage easily performs full-length sizing on even the largest magnum cases. There’s a built-in, easy-to-empty primer catcher. Complete powder-handling sys
More

Lee Precision Auto-prime Xr,

$27.39
eBay Lee Precision Auto-prime Xr,
Free Shipping
/lee-precision-autoprime/hv-ka4jCOiaO6zU5IfISYA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision Auto-Prime XR Click Thumbnails to Enlarge Lee Auto Prime XR hand priming tool is a fast, safe, and effective way of priming cases. Lee Auto Prime XR uses inexpensive Lee Hand Prime shell holders only. Accepts primers from all manufacturers.A fast, safe, and effective way of priming cases Auto Prime XR uses inexpensive Lee Hand Prime shell holders ONLY Made in USA Shipping International Orders : Please allow an additional 3-5 business days handling time. We ship via the
More

Lee Precision 6 Cavity Mold...

$53.00
Sears Lee Precision 6 Cavity Mold .44 Caliber
+ $8.20 shipping
/lee-precision-6-cavity/o6xZptnkhHIouFTq8KItbg==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 6 Cavity Mold .44 Caliber produces a .429 diameter 240 grain round nose bullet suitable for cartridges like 44 Special, 44/40 etc. It s made for heavy duty volume production. The mold and blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. A handle attached to the sprue plate is included; however, the handles to open and close the mold are sold separately.
More

Lee Precision Carbide 3 Die...

$42.98
Sears Lee Precision Carbide 3 Die Set .380 Mag
+ $8.20 shipping
/lee-precision-carbide-3/uZGeK9m0TGIBC50utXqLYw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee 18-Cavity Buckshot Molds

$49.99
Cabela's Lee 18-Cavity Buckshot Molds
+ $8.95 shipping
/lee-18cavity-buckshot/L8sqKrEuJ-vp6ybIYUn7PQ==/info
Cabela's
IN_STOCK ( In stock )
Speed up your shotshell pellet production. These precision- machined molds produce 18 linked pellets per cast enough to load two 12-gauge shotshells. Use the molds to easily cast up to 3,000 pellets per hour. Lee Mold Handles sold separately. Type: Bullet Molds & Casting. Description/Model : 000 Buck. Cal/Gaug 000 Buck Mold. Sports and Outdoors > Sport and Outdoor
More

Lee Breech Lock Lock-Ring...

$12.49
Brownells Lee Breech Lock Lock-Ring Eliminator - Lee Lock-Ring Eliminator
+ $7.95 shipping
/lee-breech-lock-lockring/ZpfcJFEtL7qNv7fCeBXJ6w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lee Breech Lock Quick Change Bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position. Includes 7/64 allen wrench. The Eliminator is turned from a solid piece of steel and the lock ring is integrated into the design of the part. Thus giving you a better grip when removing from your breech lock equipped press and a added sense of security knowing that your die adjustments will not change when removing Pack of 2 Lock-Ring Eliminator bushings. Mfg: Lee
More

Lee Precision Classic Cast...

$129.99
Sears Marketplace Lee Precision Classic Cast Press
No Shipping Info
/lee-precision-classic/CXfMkqK1m1tzg8SNv8IFIQ==/info
Sears Marketplace
IN_STOCK ( In stock )
The Lee Precision classic cast press is cast and machined with baked powder finish and all steel linkage that makes this one of the most sturdy presses made. Spent primers are collected and drop into a flexible plastic tube for easy emptying.
More

Lee Precision 6 Cavity Mold...

$53.00
Sears Lee Precision 6 Cavity Mold .45 Caliber
+ $8.20 shipping
/lee-precision-6-cavity/U1ShEoIhmXGX8FBeFeVT5g==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 6 Cavity Mold is machined from commercial quality aluminum and feature steel bushing and alignment pins. It is machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. It comes with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end.
More

Lee Precision 6 Cavity Mold...

$53.00
Sears Lee Precision 6 Cavity Mold 357 Magnum
+ $8.20 shipping
/lee-precision-6-cavity/HhFrLsDfg7Y4pIZmbot43w==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 6 Cavity Mold is machined from commercial quality aluminum and feature steel bushing and alignment pins. It is machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. It comes with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end.
More

Lee Precision 6 Cavity Mold...

$53.00
Sears Lee Precision 6 Cavity Mold .38 Caliber
+ $8.20 shipping
/lee-precision-6-cavity/Ww6EY06hE8VLVUhuo13jiQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision 6 Cavity Mold .99 Caliber produces a .358 diameter 150 grain round nose bullet suitable. It s made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. It will achieve a roundness of .001 or less.
More

Lee Precision Carbide 3 Die...

$42.98
Sears Lee Precision Carbide 3 Die Set .44 Mag
+ $8.20 shipping
/lee-precision-carbide-3/_1eNidEJ3Llq3QxCaiIQtg==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee Precision Pacesetter Dies...

$41.98
Sears Lee Precision Pacesetter Dies 8x57 Mauser
+ $8.20 shipping
/lee-precision-pacesetter/pmI9bC_il7Zlpe2soC9vEw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Pacesetter Dies includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions with Load Data.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623