Lee Lee Carbide Factory Crimp Die 9mm Luger Sports and Outdoors - Shopping.com

Category

Sport and Outdoor

Narrow By...

Showing results for "lee lee carbide factory crimp die 9mm luger"
Results 1 - 40 of 699

Lee Precision 4 Die - Deluxe...

$43.99
Brownells Lee Precision 4 Die - Deluxe Pistol Die Set - 9mm Luger Carbide 4-Die Set
+ $7.95 shipping
/lee-precision-4-die/oEglxpU1zKDLBFYyyqWl_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee Precision
More

Lee Taper Crimp Die 9mm Luger

$13.99
MidwayUSA Lee Taper Crimp Die 9mm Luger
+ $4.99 shipping
/lee-taper-crimp-die-9mm/2I2H0isN1vKHK_kUxoXeJw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already a modified taper crimp. Jacketed bullets must have a crimp groove (cannelure). Shellholder sold separately. Comes shipped with a plastic storage case.
More

Lee Precision Pistol Carbide...

$19.99
Brownells Lee Precision Pistol Carbide Factory Crimp Dies - Lee Carbide Factory Crimp Die, 9mm Luger
+ $7.95 shipping
/lee-precision-pistol/0HceSaZZAVRWmQxwBGnxnA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube Mfg: Lee Precision
More

Lee Carbide 3-Die Set 9mm...

$32.99
MidwayUSA Lee Carbide 3-Die Set 9mm Luger
+ $7.59 shipping
/lee-carbide-3die-set-9mm/-jhzhWxyxBDBFhk3k81vRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Factory Crimp Die 30 Luger

$18.79
MidwayUSA Lee Factory Crimp Die 30 Luger
+ $4.99 shipping
/lee-factory-crimp-die-30/X_jAnvDIbFMvqxqvlXZqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Undersized Carbide Sizing...

$19.99
MidwayUSA Lee Undersized Carbide Sizing Die 9mm Luger
+ $4.99 shipping
/lee-undersized-carbide/yhgzqvwuBM4L-D3eaE1tGg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002 and .003 smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide... Less
More

Lee Deluxe Carbide 4-Die Set...

$43.99
MidwayUSA Lee Deluxe Carbide 4-Die Set 9mm Luger
+ $7.59 shipping
/lee-deluxe-carbide-4die/WB7JXRvHtVSJawKQwKV-Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length die, bullet seating die, carbide factory crimp die, powder thru expanding die, universal shell holder, powder dripper, and instructions/load data. Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Die Types Included Carbide Full Length Sizing Die Powder Through Expanding Die Bullet Seating Die Carbide Factory Crimp Die Accessories: Plastic Storage Case Universal Shellholder Powder Dipper Instructions/Load Data Sheet Notes: Carbide dies do not require the cases to be lubricated prior... Less
More

Lee Carbide Sizer Die 9mm...

$24.99
MidwayUSA Lee Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/lee-carbide-sizer-die-9mm/sIKp2HSJvazcNyK_Jnygdw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been making high quality reloading equipment for over 50 years. Lee Carbide Sizing Dies are great for straight wall cartridge cases. The solid carbide insert is ground to a special contour that will not leave a belt mark on the cartridge case. Carbide dies require no lubricant and will actually burnish the case to improve the finish. Carbide dies will last a lifetime and not wear out. Shellholder sold separately. Technical Information Material: Steel Die Type: Carbide Sizing Die Accessories: Plastic Storage Box Notes: No lubrication required
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 9x18mm (9mm Makarov)
+ $4.99 shipping
/lee-carbide-factory-crimp/SyyOT3Vsyi6n8bd6J_U3sQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lyman Taper Crimp Die 9mm...

$19.75
MidwayUSA Lyman Taper Crimp Die 9mm Luger
+ $4.99 shipping
/lyman-taper-crimp-die-9mm/Me7-Dcf0gIMgiBGGH8EbBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Taper Crimp Dies apply the proper taper crimp to pistol cases. Essential for proper function in auto pistols. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Taper Crimp Die Notes: For use with the 9mm Luger. Applies the proper crimp to pistol cases. Comes in a plastic storage case.
More

Lee Quick Trim Die 9mm Luger

$13.99
MidwayUSA Lee Quick Trim Die 9mm Luger
+ $4.99 shipping
/lee-quick-trim-die-9mm/qA96TWt0CuCiW72bMrVMuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 38 Super
+ $4.99 shipping
/lee-carbide-factory-crimp/LX8wnk0fu7U-BB4T2YlmdA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

RCBS Carbide 3-Die Set with...

$44.99
MidwayUSA RCBS Carbide 3-Die Set with Taper Crimp 9mm Luger
+ $7.59 shipping
/rcbs-carbide-3die-set/Im37imi0i877YQ2joEt3OQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 32 S&W Long, 32 H&R Magnum
+ $4.99 shipping
/lee-carbide-factory-crimp/2eSb8_I6ecOAGTFljKAZxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Redding Micro- Adjustable...

$64.49
MidwayUSA Redding Micro- Adjustable Taper Crimp Die 38 Super/9mm Luger
+ $4.99 shipping
/redding-microadjustable/XIYnxeyofisCJmiGKY3IeQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Micro-Adjustable Taper Crimp Dies provide faster, more precise adjustments than typical taper crimp dies. The micrometer features white hash marks for easy identification of adjustments. Taper crimp dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Technical InformationMateri al: Steel Die Type Included: Micrometer Adjustable Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 380 ACP
+ $4.99 shipping
/lee-carbide-factory-crimp/k8IJibHLzwcSNSSag1LAKg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Precision Pistol Carbide...

$33.29
Brownells Lee Precision Pistol Carbide 3 Die Sets - 9mm Luger Carbide 3-Die Set
+ $7.95 shipping
/lee-precision-pistol/GTaK8fxQdiix_FktVaVROA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee Precision
More

Redding Taper Crimp Die 9mm...

$28.49
MidwayUSA Redding Taper Crimp Die 9mm Luger
+ $4.99 shipping
/redding-taper-crimp-die/UAFUkg80DpevmbMxokx3DQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 41 Remington Magnum
+ $4.99 shipping
/lee-carbide-factory-crimp/kae5I66BK5zbTUR1cPfocA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 9mm Luger
+ $4.99 shipping
/lee-powder-through/pbrwZGf_6uzSaPgAdNgOyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 45 ACP, 45 Auto Rim
+ $4.99 shipping
/lee-carbide-factory-crimp/suKEQ6vzduATP0ySeq4Kzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp (Taper crimp) is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder... Less
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 44 Special, 44 Remington Magnum
+ $4.99 shipping
/lee-carbide-factory-crimp/kb43lOKrm2toMhIpgQzG3A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Redding Carbide 3-Die Set 9mm...

$107.99
MidwayUSA Redding Carbide 3-Die Set 9mm Luger
+ $8.39 shipping
/redding-carbide-3die-set/_UuTynBVV2BISyIPpxFzxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Carbide 3-Die Set is designed for use in single stage or turret presses. Includes a Titanium Carbide Sizing/Decapping Die, Expanding Die and Seating Die. Standard 7/8-14 thread. Shellholder sold separately. Titanium Carbide dies do not require the use of case sizing lube when sizing brass. These die sets come with a Profile Crimp Die unless the cartridge headspaces on the case mouth requiring a Taper Crimp Die. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder not included.
More

Lyman Carbide 3-Die Set 9mm...

$54.49
MidwayUSA Lyman Carbide 3-Die Set 9mm Luger
+ $7.59 shipping
/lyman-carbide-3die-set/kr_YADJdCtg5p_H2ul9ozg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Carbide 3-Die Sets include a full length sizing die with carbide sizing ring and decapping unit, a 2-step expander die and a bullet seating die. No sizing lube is required with these carbide dies. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with carbide sizing ring and one-piece decapping unit) 2-Step Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included.
More

Lee Precision Carbide Factory...

$17.99
Walmart.com Lee Precision Carbide Factory Crimp Die, 9mm Luger
+ $5.97 shipping
/lee-precision-carbide/oCWaO-I_8rfyMYRP5deEeg==/info
Walmart.com
IN_STOCK ( In stock )
The Lee Precision Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp. Trim length is not critical so this extra operation takes less time than it would if cases were trimmed and chambered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow-burning magnum powders.
More

Redding Pro Series Carbide...

$117.99
MidwayUSA Redding Pro Series Carbide 3-Die Set 9mm Luger
+ $7.59 shipping
/redding-pro-series/iFUbVXaJcWZc27OVCXHWiA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Pro Series Carbide 3-Die Set is designed for use in progressive presses. Set includes Carbide Sizing/Decapping Die, Bullet Seating Die (designed for bullet seating only - no crimping feature) and a Profile Crimp Die (For cartridges that headspace on the case mouth, a taper crimp die is substituted). All dies in the set have a special large radius at the mouth for easy case entry, a necessary feature for progressive machines. Shellholder sold separately. Carbide dies require no case sizing lubricant. Made in the USA.Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Seater Die (with no crimping feature) Profile Crimp Die (for cartridges which headspace on the mouth of the case, a Taper Crimp Die is substituted.)... Less
More

Lee Carbide Factory Crimp Die...

$17.99
MidwayUSA Lee Carbide Factory Crimp Die 45 Colt (Long Colt), 454 Casull
+ $4.99 shipping
/lee-carbide-factory-crimp/cho8H1ctDzIJCpeb2R_zsw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lyman Carbide 4-Die Set 9mm...

$76.99
MidwayUSA Lyman Carbide 4-Die Set 9mm Luger
+ $8.39 shipping
/lyman-carbide-4die-set/PpW2pHGyKh9L6rnrwlcXIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Pistol Dies deliver round after round of the high performance ammo serious shooters demand. Whether for bullseye, action or cowboy shooting, pistol reloaders most often are looking to generate volumes of reloads which deliver consistent quality. That's why Lyman Pistol Dies are such a good choice and they fit virtually any reloading press, including the popular progressives. Most importantly, when it comes to precision, smoothness and versatility, Lyman Pistol Dies are unsurpassed. Lyman Carbide 4-Die Sets feature a separate taper crimp die and two-step neck expander M die. The M die improves the accuracy of cast and jacketed bullets. Like standard expander button styles, the M die doesn't stretch the case. Working in a two-step process, the first step expands the inside of the case... Less
More

Lee Classic Loader 9mm Luger

$28.99
MidwayUSA Lee Classic Loader 9mm Luger
+ $7.59 shipping
/lee-classic-loader-9mm/bycHhcOGrSqvjnZj2bcDQw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater and Priming Chamber, Priming Rod, Powder Measure, load data, plastic case and complete instructions. Technical InformationMateri al: Steel Loader Parts Plastic Powder Dipper Kit Includes: Bullet Seater and Priming Chamber Decapping Chamber Sizing Die Decapper Priming Rod Powder Measure Load Data Complete Instructions Notes: Complete Reloading System (requires hammer which is not included) Also Includes Plastic Storage Case
More

Redding Competition Pro...

$169.99
MidwayUSA Redding Competition Pro Series Carbide 3-Die Set 9mm Luger
+ $8.39 shipping
/redding-competition-pro/ptkUlVPPKUHQuQKho64NOg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Competition Pro Series Carbide 3-Die Sets were designed for use in progressive presses when producing a high volume of precise ammunition is desired. These die sets feature a Carbide Sizing Die, Competition Seating Die and Profile Crimp Die (a Taper Crimp Die is included for cartridges that headspace on the case mouth). No expander die is included because many progressive machines expand the case mouth at the powder metering station. Competition Seating Die features micrometer adjustments for precise bullet seating. Shellholder sold separately. Carbide dies do not require case sizing lube when sizing brass. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Seater Die (with no crimping feature) Profile Crimp... Less
More

RCBS Taper Crimp Seater Die...

$17.79
MidwayUSA RCBS Taper Crimp Seater Die 9mm Luger
+ $4.99 shipping
/rcbs-taper-crimp-seater/CMcEn7AkWJnkAeBzn2BdkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use. Technical InformationMateri al: Steel Die Type Included: Taper Crimp Seater Die Accessories: Plastic storage case Notes: The crimp gently tapers tighter and tighter to hold the bullet in place. It does not affect the overall length of the cartridge. This is very important for semi-automatics where the cartridge headspaces on the case mouth. A Bullet seater is used to push (seat) the bullet down into the case to a specific depth.
More

Redding Carbide Sizer Die 9mm...

$83.99
MidwayUSA Redding Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/redding-carbide-sizer-die/A_XYVrS5KrUr7R_XJHdOfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Titanium Carbide Dies are used in Redding's premium die sets such as the Pro Series and Competition Pro Series. These Sizer Dies offer a smoother finish than other dies thanks to the inherent grain structure of the titanium carbide. The result is fluid function with no binding; a quality that is simply unattainable with other materials. These dies also include a decapping assembly. Like all Redding dies, these dies are carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. Carbide dies do not require case sizing lube when sizing brass.Technical InformationMateri al: Steel Die Type Included: Carbide Sizer Die Accessories: Plastic storage case Notes: Cases do not need to be lubed before sizing. FOR PISTOL CASES ONLY.
More

Lyman Carbide Sizer Die 9mm...

$38.99
MidwayUSA Lyman Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/lyman-carbide-sizer-die/b4IqJ3die1AkYqyKnoPjIw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Pistol Dies deliver round after round of the high performance ammo serious shooters demand. Whether for bullseye, action or cowboy shooting, pistol reloaders most often are looking to generate volumes of reloads which deliver consistent quality. That's why Lyman Pistol Dies are such a good choice and they fit virtually any reloading press, including the popular progressives. Most importantly, when it comes to precision, smoothness and versatility, Lyman Pistol Dies are unsurpassed. Lyman was the originator of the Tungsten Carbide sizing die. Lyman Carbide Sizing Dies feature a one piece hardened steel decapping rod. Shellholder sold separately. Carbide dies do not require the use of case sizing lube. Technical InformationMateri al: Steel Die Type: Carbide Sizing Die Accessories:... Less
More

Lee Factory Crimp Die...

$18.79
MidwayUSA Lee Factory Crimp Die 5.7x28mm FN
+ $4.99 shipping
/lee-factory-crimp-die/fCWqkwZGvHZZQBimIzrnpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS Carbide Sizer Die 9mm...

$33.99
MidwayUSA RCBS Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/rcbs-carbide-sizer-die/c59rJ351gOOZ-b2GGt9xug==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Carbide Sizer Die eliminates the need for case lubrication. Sizes and decaps in one quick step. Shellholder sold separately. Includes a plastic storage case and Lifetime Guarantee from RCBS
More

Lee Factory Crimp Die 7.7mm...

$12.49
MidwayUSA Lee Factory Crimp Die 7.7mm Japanese
+ $4.99 shipping
/lee-factory-crimp-die/c1AIvUg18tf3b3pvALCn0w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Steel 3-Die Set 30 Luger

$31.99
MidwayUSA Lee Steel 3-Die Set 30 Luger
+ $7.59 shipping
/lee-steel-3die-set-30/oUO_1oIAiuV2IgTb5RYbjQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp.
More

Lee Factory Crimp Die 7-30...

$12.49
MidwayUSA Lee Factory Crimp Die 7-30 Waters
+ $4.99 shipping
/lee-factory-crimp-die/xj0nLFEz4P70CqBuCDrmRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Factory Crimp Die 6mm...

$12.49
MidwayUSA Lee Factory Crimp Die 6mm Remington
+ $4.99 shipping
/lee-factory-crimp-die-6mm/7RLndj-YKQFK4UTb3vR9Gw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Hornady Custom Grade New...

$22.99
MidwayUSA Hornady Custom Grade New Dimension Taper Crimp Seater Die 9mm Luger, 9x21mm
+ $4.99 shipping
/hornady-custom-grade-new/4WwyaEFeRJag8Mwp46skXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Taper Crimp Seater Die is a great die for any avid reloader. The CGND Taper Crimp Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem while giving a nice taper crimp. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a taper crimp. The CGND Seater Die is also compatible with popular bullets like the FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Taper Crimp Seating Die Accessories: Plastic Storage case. Hornady Sure-Loc Ring Notes: Features Hornady's No-Risk... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407