Lee Lee Carbide Factory Crimp Die 9mm Luger Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "lee lee carbide factory crimp die 9mm luger"
Results 1 - 40 of 1230

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 9mm Luger
+ $4.99 shipping
/lee-carbide-factory-crimp/V6-Pf7-ht5QNE_IehtRxUQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Precision 4 Die - Deluxe...

$43.99
Brownells Lee Precision 4 Die - Deluxe Pistol Die Set - 9mm Luger Carbide 4-Die Set
+ $7.95 shipping
/lee-precision-4-die/oEglxpU1zKDLBFYyyqWl_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee Precision
More

Lee 9mm Luger Carbide Factory...

$25.04
eBay Lee 9mm Luger Carbide Factory Crimp Die (90860)
Free Shipping
/lee-9mm-luger-carbide/38HcQHedULjgO5bi1w6zPQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee 9mm Luger Carbide Factory Crimp Die This die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnums an
More

Lee Taper Crimp Die 9mm Luger

$13.99
MidwayUSA Lee Taper Crimp Die 9mm Luger
+ $4.99 shipping
/lee-taper-crimp-die-9mm/2I2H0isN1vKHK_kUxoXeJw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already a modified taper crimp. Jacketed bullets must have a crimp groove (cannelure). Shellholder sold separately. Comes shipped with a plastic storage case. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

90860 Lee Carbide Factory...

$21.50
eBay 90860 Lee Carbide Factory Crimp Die 9mm Luger
Free Shipping
/90860-lee-carbide-factory/XWSWJMCQjq4r_S4sg2QADA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
90860 Lee Carbide Factory Crimp Die 9mm Luger Description Click to view supersize image Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. The adjusting screw quickly and easily sets the desired amount of crimp.  It is impossible to buckle the case as with conventional bullet seating die. The crimper cannot be misadjusted to make a case mouth too small to properly head-space.  A firm crimp is essenti
More

Lee Undersized Carbide Sizing...

$19.99
MidwayUSA Lee Undersized Carbide Sizing Die 9mm Luger
+ $4.99 shipping
/lee-undersized-carbide/yhgzqvwuBM4L-D3eaE1tGg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002 and .003 smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide... Less
More

Lee Carbide Factory Crimp Die...

$29.11
eBay Lee Carbide Factory Crimp Die 9mm Luger 90860 In Box Same Day Ship
+ $5.00 shipping
/lee-carbide-factory-crimp/AWihR1AtYxNgMAqlsOw7rQ==/info
eBay
IN_STOCK ( In stock )
I SHIP SAME DAY - BUY WITH CONFIDENCE - REVIEW MY FEEDBACK - HAPPY BIDDING!!Product Information The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-l
More

Lee Factory Crimp Die 30 Luger

$20.99
MidwayUSA Lee Factory Crimp Die 30 Luger
+ $4.99 shipping
/lee-factory-crimp-die-30/X_jAnvDIbFMvqxqvlXZqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Lee Carbide Factory Crimp Die...

$18.99
eBay Lee Carbide Factory Crimp Die 9mm Luger 9x19 Nato In Box 90860
+ $3.45 shipping
/lee-carbide-factory-crimp/R111-hnuA3-mkTT_EsHiLg==/info
eBay
IN_STOCK ( In stock )
Lee Carbide Factory Crimp Die for 9mm Luger / 9x19 Nato. BRAND NEW IN FACTORY BOX, IN STOCK AND READY TO SHIP. The Lee Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and
More

Lee Precision Carbide Crimp...

$20.75
eBay Lee Precision Carbide Crimp Die 9mm Luger 9x19 90860 Factory
No Shipping Info
/lee-precision-carbide/OggN9J2FR8M1ZOBBnu1J3w==/info
eBay
IN_STOCK ( In stock )
Lee Precision Carbide Crimp Die 9mm Luger # 90860 FACTORY NEW! Product Description Lee 9MM LUGER Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition,
More

Lee Precision Factory Carbide...

$26.79
eBay Lee Precision Factory Carbide Crimp Die 9mm Luger 90860
Free Shipping
/lee-precision-factory/NcZ890wZtiOUI3P3TP0_9g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LEE PRECISION Part # 90860 CARBIDE CRIMP DIE for 9mm Luger UPC# 734307908607 NEW IN THE PACKAGE USA SHIPPING ONLY _________________ _________________ _________________ _________________ __________ Contact us: Please ask us questions prior to bidding or purchasing. We do not close ad’s or auctions early so please do not ask. We only communicate prior to close of sale through eBay’s message system. Please click on the “contact seller ” tab to contact us. Payment: We only accept PayPal. Items
More

Lee Precision Pistol Carbide...

$19.99
Brownells Lee Precision Pistol Carbide Factory Crimp Dies - Lee Carbide Factory Crimp Die, 9mm Luger
+ $7.95 shipping
/lee-precision-pistol/0HceSaZZAVRWmQxwBGnxnA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube Mfg: Lee Precision
More

Lee Carbide Sizer Die 9mm...

$24.99
MidwayUSA Lee Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/lee-carbide-sizer-die-9mm/sIKp2HSJvazcNyK_Jnygdw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been making high quality reloading equipment for over 50 years. Lee Carbide Sizing Dies are great for straight wall cartridge cases. The solid carbide insert is ground to a special contour that will not leave a belt mark on the cartridge case. Carbide dies require no lubricant and will actually burnish the case to improve the finish. Carbide dies will last a lifetime and not wear out. Shellholder sold separately. Technical Information Material: Steel Die Type: Carbide Sizing Die Accessories: Plastic Storage Box Notes: No lubrication required Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Deluxe Carbide 4-die Set...

$61.99
eBay Lee Deluxe Carbide 4-die Set 9mm Luger - 90963 - Includes Factory Crimp Die
Free Shipping
/lee-deluxe-carbide-4die/ei7rgr186OV-2cnYjnZmKg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LIMITED SUPPLY - I AM A TRUSTED SELLER - FEEL FREE TO ASK ANY QUESTIONS SHIPPING SAME DAY!!!Product Information The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder), a bullet se
More

Lyman Taper Crimp Die 9mm...

$23.99
MidwayUSA Lyman Taper Crimp Die 9mm Luger
+ $4.99 shipping
/lyman-taper-crimp-die-9mm/Me7-Dcf0gIMgiBGGH8EbBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Taper Crimp Dies apply the proper taper crimp to pistol cases. Essential for proper function in auto pistols. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Taper Crimp Die Notes: For use with the 9mm Luger. Applies the proper crimp to pistol cases. Comes in a plastic storage case. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 40 S&W, 10mm Auto
+ $4.99 shipping
/lee-carbide-factory-crimp/BhVwWe_J1nLmFYfulAo2zQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 38 Super
+ $4.99 shipping
/lee-carbide-factory-crimp/LX8wnk0fu7U-BB4T2YlmdA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

RCBS Carbide 3-Die Set with...

$52.99
MidwayUSA RCBS Carbide 3-Die Set with Taper Crimp 9mm Luger
+ $7.59 shipping
/rcbs-carbide-3die-set/Im37imi0i877YQ2joEt3OQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Deluxe Carbide 4 Die Set...

$42.99
eBay Lee Deluxe Carbide 4 Die Set 9mm Luger 9x19 Nato In Box 90963
+ $6.95 shipping
/lee-deluxe-carbide-4-die/SgSaqbVqO3JL0BlTGLvyuQ==/info
eBay
IN_STOCK ( In stock )
Lee Deluxe Carbide 4 Die Set for 9mm Luger / 9x19 Nato. Set includes a Carbide Sizer Die, Carbide Factory Crimp Die, Powder Through Expander Die, Bullet Seater Die and all Lee products come with a 2 year warranty. No Lube is required with carbide dies.Includes: Plastic Storage Container Free Shellholder Little Powder dipper A Load data sheet Carbide Sizing Die Carbide Factory Crimp Die Powder through Expanding Die Seating die has an adjustable crimp from slight taper to full roll Lee reloading
More

Lee 9mm Luger Deluxe Pistol...

$53.10
eBay Lee 9mm Luger Deluxe Pistol Carbide 4 Die Set (90963)
Free Shipping
/lee-9mm-luger-deluxe/1pybrMMMmHdljPjh6x2BDQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee 9mm Luger Deluxe Pistol Carbide 4 Die Set The Lee Deluxe Pistol Carbide 4 Die Set combines the world's most popular carbide 3 die set with the Lee Carbide Factory Crimp Die at a great price. No other die set at any price will produce more reliable or accurate ammo.By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die wi
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 32 S&W Long, 32 H&R Magnum
+ $4.99 shipping
/lee-carbide-factory-crimp/2eSb8_I6ecOAGTFljKAZxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Redding Taper Crimp Die 9mm...

$28.49
MidwayUSA Redding Taper Crimp Die 9mm Luger
+ $4.99 shipping
/redding-taper-crimp-die/UAFUkg80DpevmbMxokx3DQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 380 ACP
+ $4.99 shipping
/lee-carbide-factory-crimp/k8IJibHLzwcSNSSag1LAKg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 45 ACP, 45 Auto Rim
+ $4.99 shipping
/lee-carbide-factory-crimp/suKEQ6vzduATP0ySeq4Kzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp (Taper crimp) is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder... Less
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 9mm Luger
+ $4.99 shipping
/lee-powder-through/pbrwZGf_6uzSaPgAdNgOyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Carbide Factory Crimp Die...

$19.99
MidwayUSA Lee Carbide Factory Crimp Die 44 Special, 44 Remington Magnum
+ $4.99 shipping
/lee-carbide-factory-crimp/kb43lOKrm2toMhIpgQzG3A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Carbide Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Carbide Factory Crimp Die features a carbide ring that sizes the cartridge while it is being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp while a factory-like crimp is added to more firmly hold the bullet in place. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. A firm crimp is essential for dependable and accurate ammunition. Shellholder sold separately... Less
More

Lee Precision Pistol Carbide...

$33.29
Brownells Lee Precision Pistol Carbide 3 Die Sets - 9mm Luger Carbide 3-Die Set
+ $7.95 shipping
/lee-precision-pistol/GTaK8fxQdiix_FktVaVROA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee Precision
More

Redding Carbide 3-Die Set 9mm...

$107.99
MidwayUSA Redding Carbide 3-Die Set 9mm Luger
+ $8.39 shipping
/redding-carbide-3die-set/_UuTynBVV2BISyIPpxFzxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Carbide 3-Die Set is designed for use in single stage or turret presses. Includes a Titanium Carbide Sizing/Decapping Die, Expanding Die and Seating Die. Standard 7/8-14 thread. Shellholder sold separately. Titanium Carbide dies do not require the use of case sizing lube when sizing brass. These die sets come with a Profile Crimp Die unless the cartridge headspaces on the case mouth requiring a Taper Crimp Die. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder not included. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun... Less
More

Lyman Carbide 3-Die Set 9mm...

$54.49
MidwayUSA Lyman Carbide 3-Die Set 9mm Luger
+ $7.59 shipping
/lyman-carbide-3die-set/kr_YADJdCtg5p_H2ul9ozg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Carbide 3-Die Sets include a full length sizing die with carbide sizing ring and decapping unit, a 2-step expander die and a bullet seating die. No sizing lube is required with these carbide dies. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with carbide sizing ring and one-piece decapping unit) 2-Step Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee .40 S&W/10mm Carbide...

$17.99
Academy Sports and Outdoors Lee .40 S&W/10mm Carbide Factory Crimp Pistol Die (0734307908621)
+ $7.26 shipping
/lee-40-sw10mm-carbide/boPQcJKmGcKcdQ_1dVwVYA==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Lee .40 S&W/10mm Carbide Factory Crimp Pistol Die sizes cartridges while they are being crimped and features an adjusting screw. Available at Academy Sports + Outdoors.
More

Lee Load-Master Progressive...

$255.99
MidwayUSA Lee Load-Master Progressive Press Kit 9mm Luger
+ $14.49 shipping
/lee-loadmaster/yVe6OH3YsEEhFJ8gs9k2Ow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press, and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting. Lee Load-Master progressive 5-hole reloading kit for 9mm Luger. Includes carbide 3 die set (full length size, powder through expanding and bullet seating dies), turret, shell plate powder measure, case feeder and primer feed.Technical Information Press Type: Progressive Press Auto Index: YesNumber of Stations: 5Frame Material: Steel, Cast Aluminum and Polymer Frame Design: O-Frame Frame Offset:... Less
More

RCBS Taper Crimp Seater Die...

$20.99
MidwayUSA RCBS Taper Crimp Seater Die 9mm Luger
+ $4.99 shipping
/rcbs-taper-crimp-seater/CMcEn7AkWJnkAeBzn2BdkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use. Technical InformationMateri al: Steel Die Type Included: Taper Crimp Seater Die Accessories: Plastic storage case Notes: The crimp gently tapers tighter and tighter to hold the bullet in place. It does not affect the overall length of the cartridge. This is very important for semi-automatics where the cartridge headspaces on the case mouth. A Bullet seater is used to push (seat) the bullet down into the case to a specific depth. Searches for products like these typically include:... Less
More

Redding Carbide Sizer Die 9mm...

$83.99
MidwayUSA Redding Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/redding-carbide-sizer-die/A_XYVrS5KrUr7R_XJHdOfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Titanium Carbide Dies are used in Redding's premium die sets such as the Pro Series and Competition Pro Series. These Sizer Dies offer a smoother finish than other dies thanks to the inherent grain structure of the titanium carbide. The result is fluid function with no binding; a quality that is simply unattainable with other materials. These dies also include a decapping assembly. Like all Redding dies, these dies are carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. Carbide dies do not require case sizing lube when sizing brass.Technical InformationMateri al: Steel Die Type Included: Carbide Sizer Die Accessories: Plastic storage case Notes: Cases do not need to be lubed before sizing. FOR PISTOL CASES ONLY. Searches... Less
More

Lee Factory Crimp Die 7mm...

$13.99
MidwayUSA Lee Factory Crimp Die 7mm Winchester Short Magnum (WSM)
+ $4.99 shipping
/lee-factory-crimp-die-7mm/XZh2du8F15BfjUUAlS5cJA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Lyman Carbide 4-Die Set 9mm...

$76.99
MidwayUSA Lyman Carbide 4-Die Set 9mm Luger
+ $8.39 shipping
/lyman-carbide-4die-set/PpW2pHGyKh9L6rnrwlcXIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Pistol Dies deliver round after round of the high performance ammo serious shooters demand. Whether for bullseye, action or cowboy shooting, pistol reloaders most often are looking to generate volumes of reloads which deliver consistent quality. That's why Lyman Pistol Dies are such a good choice and they fit virtually any reloading press, including the popular progressives. Most importantly, when it comes to precision, smoothness and versatility, Lyman Pistol Dies are unsurpassed. Lyman Carbide 4-Die Sets feature a separate taper crimp die and two-step neck expander M die. The M die improves the accuracy of cast and jacketed bullets. Like standard expander button styles, the M die doesn't stretch the case. Working in a two-step process, the first step expands the inside of the case... Less
More

RCBS Carbide Sizer Die 9mm...

$39.99
MidwayUSA RCBS Carbide Sizer Die 9mm Luger
+ $4.99 shipping
/rcbs-carbide-sizer-die/c59rJ351gOOZ-b2GGt9xug==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Carbide Sizer Die eliminates the need for case lubrication. Sizes and decaps in one quick step. Shellholder sold separately. Includes a plastic storage case and Lifetime Guarantee from RCBS Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,9mm Luger
More

Lee Precision Carbide Factory...

$18.14
Walmart.com Lee Precision Carbide Factory Crimp Die, 9mm Luger
+ $5.97 shipping
/lee-precision-carbide/oCWaO-I_8rfyMYRP5deEeg==/info
Walmart.com
IN_STOCK ( In stock )
The Lee Precision Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory-like dependability. The adjusting screw quickly and easily sets the desired amount of crimp. Trim length is not critical so this extra operation takes less time than it would if cases were trimmed and chambered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow-burning magnum powders.
More

Lee Factory Crimp Die 7.7mm...

$13.99
MidwayUSA Lee Factory Crimp Die 7.7mm Japanese
+ $4.99 shipping
/lee-factory-crimp-die/c1AIvUg18tf3b3pvALCn0w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Lee Factory Crimp Die 7-30...

$13.99
MidwayUSA Lee Factory Crimp Die 7-30 Waters
+ $4.99 shipping
/lee-factory-crimp-die/xj0nLFEz4P70CqBuCDrmRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443