Category

Sport and Outdoor
Showing results for "lee lee 40 s w or 10mm deluxe carbide 4 die set lee 90965"
Results 1 - 40 of 1500+

Lee Deluxe Carbide Pistol...

$47.99
Cabela's Lee Deluxe Carbide Pistol Four-Die Set
+ $8.95 shipping
/lee-deluxe-carbide-pistol/Nt-hM3oo9SZAcsY263CvNg==/info
Cabela's
IN_STOCK ( In stock )
Built to last, Lee dies deliver improved reloading with less hassle and consistency that improves accuracy. Features in each die set includes an unbreakable decapper, built-in stuck-case remover, free-floating bullet seater, finger- adjustable locking rings and a fitted storage case. Shell holder, powder dipper and load data included. Includes a contour ground carbide sizing die that doesnt need case lube, plus a bullet seating and feed die, a powder through expanding die and a carbide factory-crimp die. Sports and Outdoors > Sport and Outdoor
More

Lee Deluxe Carbide Pistol...

$47.99
Cabela's Lee Deluxe Carbide Pistol Four-Die Set
+ $8.95 shipping
/lee-deluxe-carbide-pistol/Nt-hM3oo9SZAcsY263CvNg==/info
Cabela's
IN_STOCK ( In stock )
Built to last, Lee dies deliver improved reloading with less hassle and consistency that improves accuracy. Features in each die set includes an unbreakable decapper, built-in stuck-case remover, free-floating bullet seater, finger- adjustable locking rings and a fitted storage case. Shell holder, powder dipper and load data included. Includes a contour ground carbide sizing die that doesnt need case lube, plus a bullet seating and feed die, a powder through expanding die and a carbide factory-crimp die. Sports and Outdoors > Sport and Outdoor
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, 9mm Luger
+ $7.95 shipping
/lee-4-die-deluxe-pistol/oEglxpU1zKDLBFYyyqWl_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee Precision Carbide 4 Die...

$42.67
Sears Lee Precision Carbide 4 Die Set 40 S&W
+ $6.95 shipping
/lee-precision-carbide-4/US9BRUAXzv5NKa6ZVDw7LA==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 4 Die Set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, 38 Special
+ $7.95 shipping
/lee-4-die-deluxe-pistol/XZCy81jSDmhglH2HOC-YIw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee 90965 Deluxe Carbide...

$38.95
eBay Lee 90965 Deluxe Carbide 4-die Set 40 S&w 10mm Auto
+ $6.95 shipping
/lee-90965-deluxe-carbide/PlwLPEbza7i-0rjy6Bqfbg==/info
eBay
IN_STOCK ( In stock )
NEW!IN ORIGINAL PACKAGING LEE 90965 * DELUXE CARBIDE 4-DIE SET 40 S W * 10MM AUTO Link to Deluxe 4-Die Set Instructions: http: //leeprecision. com/cgi- data/instruct/Pis tol4.pdf LEE #90965 The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length sizing die with decapping unit, powder through expanding die (used for expanding and
More

Lee Precision Carbide 3 Die...

$31.62
Sears Lee Precision Carbide 3 Die Set 40 S&W
+ $8.20 shipping
/lee-precision-carbide-3/Fq3bTxlWiTEEexU8HNZB8g==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, .40 S&W
+ $7.95 shipping
/lee-4-die-deluxe-pistol/7g21a2UVViJUi0xubHsqaA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, .45 Acp
+ $7.95 shipping
/lee-4-die-deluxe-pistol/fSnk2m79gD6ut62YelcB_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee Precision Carbide 3 Die...

$40.83
Sears Lee Precision Carbide 3 Die Set 10 MM
+ $8.20 shipping
/lee-precision-carbide-3/i3X8ieeUukd-puQExOYe6w==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee Deluxe Carbide 4 Die Set...

$49.99
eBay Lee Deluxe Carbide 4 Die Set For 40 S&w/10mm, 90965,nib
+ $5.80 shipping
/lee-deluxe-carbide-4-die/JpYkz4lXdROkWHLH1twagA==/info
eBay
IN_STOCK ( In stock )
NIB,Lee Precision Deluxe 4 Die Set for 40 S W/10mm , #90965. The 4 die set includes a FL Carbide Sizing Die, powder thru expander die, bullet seat and feed die, carbide factory crimp die, shell holder, powder measure scoop and load data. Will ship same day or next morning after payment is received. No international shipping. Paypal only. Please message me with any questions. We never charge a handling fee and ship using the least expensive method at USPS current rates. Please make arrangements
More

Lee Precision Carbide 3 Die...

$40.83
Sears Lee Precision Carbide 3 Die Set .380 Mag
+ $8.20 shipping
/lee-precision-carbide-3/uZGeK9m0TGIBC50utXqLYw==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 3 Die Set includes powder through expanding die, bullet seating die, and a carbide full length sizing die. This 3 die set is perfect for effective and efficient re-use of your ammunition. The dies have been packaged in an air-tight, low profile box that will preserve the integrity of your dies and keep them organized and at the ready.
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - Lee Carbide 3 Die Pistol Set, 9mm Luger
+ $7.95 shipping
/lee-pistol-carbide-3-die/GTaK8fxQdiix_FktVaVROA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Lee Precision Carbide 4 Die...

$47.20
Sears Lee Precision Carbide 4 Die Set 9 mmLuger
+ $6.95 shipping
/lee-precision-carbide-4/4FhVxZsyfUg5jsBHocwSkQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Carbide 4 Die Set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
More

Lee Deluxe Carbide 4 Die Set...

$42.99
eBay Lee Deluxe Carbide 4 Die Set 40 Smith And Wesson 40 S&w In Box 90965
+ $6.95 shipping
/lee-deluxe-carbide-4-die/7dRghVx8L6rl20tzWT6Gkw==/info
eBay
IN_STOCK ( In stock )
Lee Deluxe Carbide 4 Die Set for 40 Smith and Wesson / 40 S W. Set includes a Carbide Sizer Die, Carbide Factory Crimp Die, Powder Through Expander Die, Bullet Seater Die and all Lee products come with a 2 year warranty. No Lube is required with carbide dies.Includes: Plastic Storage Container Free Shellholder Little Powder dipper A Load data sheet Carbide Sizing Die Carbide Factory Crimp Die Powder through Expanding Die Seating die has an adjustable crimp from slight taper to full roll Lee rel
More

Lee .40 S&w / 10mm Auto...

$47.49
eBay Lee .40 S&w / 10mm Auto Deluxe Pistol Carbide 4 Die Set (90965)
Free Shipping
/lee-40-sw-10mm-auto/ATBNCO1UCcqEQaYb_-8jNw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee .40 S W / 10mm Auto Deluxe Pistol Carbide 4 Die Set The Lee Deluxe Pistol Carbide 4 Die Set combines the world's most popular carbide 3 die set with the Lee Carbide Factory Crimp Die at a great price. No other die set at any price will produce more reliable or accurate ammo. By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through
More

Lee Lee90965 Lee 40 S&w/10mm...

$67.59
eBay Lee Lee90965 Lee 40 S&w/10mm Auto Carbide 4 Die
Free Shipping
/lee-lee90965-lee-40/0KkMasRjgQtUx85R29k7mA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
FEATURES DESCRIPTIONS SHIPPING PAYMENT RETURN POLICY GUIDE Cell Phones PDAs Clothing, Shoes Accessories Computers Networking Daypack Internal Frame Bag Consumer Electronics Electronics Health Beauty Watch Jewelry Sports Fun Shop Sports Outdoor Sporting Goods Pet Supplies Home Garden FriendlyNotice Upon receipt of our items please ensure the order is correct. We rigorously test and check our items to meet the toughest standards prior to shipping, if you encounter any problems please contact us.
More

Lee Precision Precision...

$118.75
Sears Lee Precision Precision Reloading Die Set 50 BMG
+ $6.95 shipping
/lee-precision-precision/FahINx3Xt6GbGIWd5nTuQQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Precision Reloading Die Set 50 BMG is used with the Classic Cast Press only. It Includes Full Length Sizing Die, Bullet Seating Die, and Instructions. The Die Set Does not include shell holder or powder dipper.
More

Lee .40 S&w Or 10mm Deluxe...

$37.95
eBay Lee .40 S&w Or 10mm Deluxe Carbide 4 Die Set Lee 90965
+ $5.70 shipping
/lee-40-sw-or-10mm/LfHYBIfYcJjKK3bFXcBouA==/info
eBay
IN_STOCK ( In stock )
The 4 Sportsmen eBay Listing Template HOME VIEW ALL LISTINGS ABOUT US FEEDBACK FAQ's Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest Lee .40 S W or 10MM Deluxe Carbide 4 Die Set Lee 90965 The Lee Deluxe Pistol Die Set combines the world's most popular carbide three-die set with the Lee Carbide Factory Crimp Die at a great price.
More

Carbide 3-Die Handgun Sets -...

$89.99
Brownells Carbide 3-Die Handgun Sets - Carbide 3-Die Set 9mm Luger
+ $7.95 shipping
/carbide-3die-handgun/wpLYJG-E_rs4vlCEW5E4jA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Titanium carbide differs considerably from other carbides, and is the ideal material for resizing cartridge cases. Titanium carbide has the highest hardness of any readily available carbide. The difference is in the microstructure. Viewed under a microscope it appears smooth and rounded, which presents a slippery non-galling surface, ideal for lubeless resizing of cartridges. The Carbide 3-Die set includes the Titanium Carbide sizing die, expander die and bullet seating die with built-in crimp. Mfg: Redding
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, .44 Special
+ $7.95 shipping
/lee-4-die-deluxe-pistol/G6Hae9q-aZNuu01T6dBSQQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee Pistol Carbide Factory...

$18.99
Brownells Lee Pistol Carbide Factory Crimp Dies - Lee Carbide Factory Crimp Die, .40 S&W/10mm
+ $7.95 shipping
/lee-pistol-carbide/Fa7AW1V9xTJzNbujEED0xw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube Mfg: Lee
More

Lee Pistol Carbide Factory...

$18.99
Brownells Lee Pistol Carbide Factory Crimp Dies - Lee Carbide Factory Crimp Die, .45 Acp
+ $7.95 shipping
/lee-pistol-carbide/17P_91TODOBY0MXgZN6xNg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube Mfg: Lee
More

Lee 4 Die - Deluxe Pistol Die...

$41.99
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee Carbide 4 Die Set, .45 Colt
+ $7.95 shipping
/lee-4-die-deluxe-pistol/5jalW3NnNKvR7GEcBeiI3Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee Pistol Carbide Factory...

$18.99
Brownells Lee Pistol Carbide Factory Crimp Dies - Lee Carbide Factory Crimp Die, 9mm Luger
+ $7.95 shipping
/lee-pistol-carbide/0HceSaZZAVRWmQxwBGnxnA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube Mfg: Lee
More

Lee Precision Carbide 4 Die...

$46.34
Walmart.com Lee Precision Carbide 4 Die Set
+ $4.97 shipping
/lee-precision-carbide-4/DZfe2jz-3zjjdkqFYMz46g==/info
Walmart.com
IN_STOCK ( In stock )
The Lee Precision Carbide 4 Die Set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
More

Lee Precision Pacesetter Dies...

$32.08
Sears Lee Precision Pacesetter Dies 30/30
+ $8.20 shipping
/lee-precision-pacesetter/-IJZzQ-DYHBmts9s92GYgQ==/info
Sears
IN_STOCK ( In stock )
The Lee Precision Pacesetter Dies includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions with Load Data.
More

Redding Carbide Grx Push Thru...

$76.99
Brownells Redding Carbide Grx Push Thru Base Sizing Die - 40 S&W Carbide Grx Push Thru Size Die
+ $7.95 shipping
/redding-carbide-grx-push/IF8jUjgdaems8hj9INKbVw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the bulge is removed and the brass may be returned to service. The GRX die is currently only available for 40 S&W. Mfg: Redding
More

Lee Precision Carbide 4 Die...

$40.69
Walmart.com Lee Precision Carbide 4 Die Set
+ $4.97 shipping
/lee-precision-carbide-4/YKRK_MJcmH_7yq5rq1e0EQ==/info
Walmart.com
IN_STOCK ( In stock )
The Lee Precision Carbide 4 Die Set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
More

Lee 3-Die Storage Box - Lee...

$4.49
Brownells Lee 3-Die Storage Box - Lee Die Box Round Red
+ $7.95 shipping
/lee-3die-storage-box/W1ysdR5qoM0Pd9Kw2TIzrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lee Red Round Die Box, the perfect storage for your dies. Round box made of durable red plastic, holds four dies. Invert the bottom part of the box, and store your three or four hole turret with dies installed. Mfg: Lee
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - 9mm Mak
+ $7.95 shipping
/lee-pistol-carbide-3-die/Kcf-qnRfKyZwuqC4wSerew==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Lee Deluxe Quick Trim Case...

$18.99
Brownells Lee Deluxe Quick Trim Case Trimmer - Lee Deluxe Quick Trim
+ $7.95 shipping
/lee-deluxe-quick-trim/qRHC2YDD5j0E3J3D5avTsw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Lee Deluxe Quick trim case trimmer quickly and precisely trims your brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No calipers, measurement or adjustment is required simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. This allows the user to shorten the case to a uniform shorter length than standard reducing the trimming frequency. Includes snap on chip catcher. Mfg: Lee
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - Lee Carbide 3 Die Pistol Set, 10mm Auto
+ $7.95 shipping
/lee-pistol-carbide-3-die/pl-myqWUP0FeOuoEW0FjQQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Lee Precision Carbide 4 Die...

$41.99
Walmart.com Lee Precision Carbide 4 Die Set
+ $4.97 shipping
/lee-precision-carbide-4/moVNHkJxKzv34AFcwnvSsA==/info
Walmart.com
IN_STOCK ( In stock )
The Lee Precision Carbide 4 Die Set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
More

Lee Deluxe Carbide 4-die Set...

$59.99
eBay Lee Deluxe Carbide 4-die Set 40 S&w, 10mm Auto - - Same Day Shipping
Free Shipping
/lee-deluxe-carbide-4die/SxCNu4OSI6VfS9tEz_UUyg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW IN BOX - BUY WITH CONFIDENCE - PLEASE REVIEW MY FEEDBACK AND MY EBAY STORE FOR OTHER RELOADING SUPPLIES - BEST PRICE ON EBAY DONT PAY HIGHER,WE HAVE SOLD MORE OF THESE DIE SETS THEN ANYONE ELSE HERE FOR A REASON - GREAT CUSTOMER SERVICE - FEEL FREE TO ASK QUESTIONS! Product Information The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged
More

Lee 4 Die - Deluxe Pistol Die...

$36.49
Brownells Lee 4 Die - Deluxe Pistol Die Set - Lee 4 Die Set 50 Beowulf Steel
+ $7.95 shipping
/lee-4-die-deluxe-pistol/lQa_Hfc83-nFVZ4yFzE_1A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. Mfg: Lee
More

Lee Three-Die Carbide Sets...

$31.99
Walmart.com Lee Three-Die Carbide Sets 9mm Luger
+ $4.97 shipping
/lee-threedie-carbide/-UzyTPUnNiZLuH0nzHZMfA==/info
Walmart.com
IN_STOCK ( In stock )
Invest some of your time into making your pistol ammunition your own with the Lee Precision 9mm Luger Die Set. Dedicated hobbyists can enjoy spending hours in the workshop or garage with their tools and do-it-yourselfers have that extra feeling of satisfaction after a job well done with this set. The three carbide die set, a solid steel sizing die, a powder through expander die and a seater crimper die help you create your own ammunition for your 9mm Luger. Your own ammunition factory is a great way to be a self-sufficient shooter and truly appreciate all the quality and precision in your pistol. This 9mm die set comes with most everything you need to start reloading shells and it makes a great gift for a shooting fan. Upgrade your workshop today with the Lee Precision 9mm Luger Die Set.
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - Lee Carbide 3 Die Set, 45 Ar
+ $7.95 shipping
/lee-pistol-carbide-3-die/-G_N44QxosNo8tDJkOTiJw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - Lee Carbide 3 Die Set, 44 Russian
+ $7.95 shipping
/lee-pistol-carbide-3-die/08t-qoBUuPEjQAAWgGcKUg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Lee Pistol Carbide 3 Die Sets...

$31.99
Brownells Lee Pistol Carbide 3 Die Sets - Lee Carbide 3 Die Set, 32 S&W
+ $7.95 shipping
/lee-pistol-carbide-3-die/2xnvyLP1lMrqvv7a8y4NeA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube Mfg: Lee
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355