Lee Die Reloading Set Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "lee die reloading set"
Results 1 - 40 of 1500+

Lee Carbide 3-die Reloading...

$32.00
eBay Lee Carbide 3-die Reloading Set 45 Auto Rim 90808 Free Shipping
Free Shipping
/lee-carbide-3die/t_6wSfqQwwPcVwzQIHZ7Mg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shell holder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Collet 2-Die Neck Sizer...

$28.99
Brownells Lee Collet 2-Die Neck Sizer Sets - 6.5x55mm Swedish Collet 2-Die Neck Sizer Set
+ $7.95 shipping
/lee-collet-2die-neck/3we5gUMfxOrW0b0OV67hfw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
There is no loading system that will load more accurate ammunition than Lee Collet Dies. A collet squeezes the case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies. Maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. This provides the shot start pressure normally supplied by the crimp. That's why a dead length bullet seater is included to complete the most accurate reloading system ever made. These dies size only the neck to preserve the perfect fit of fire forming. Only reload cases that have be Mfg: Lee Precision
More

Lee Large Series 2-die...

$85.00
eBay Lee Large Series 2-die Reloading Set 50 Bmg 1-1/4-12 Thread 90515 Free Shipping
Free Shipping
/lee-large-series-2die/qoZmzuWO_z4FsS0Hp-br1g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
These dies were engineered specifically for the 50 BMG and its increased demands on reloading equipment. Beefed up 1-1/4 x 12 tpi threads will work with the Lee Classic Cast Press. These dies feature the same quality and value that Lee die sets are known for, just in a larger version suitable for the 50 BMG. Technical Information Special Note: The 1-1/4x12 thread will ONLY fit in a Lee Classic Cast Press. Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Bullet Seating Die (with roll crimp) Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shell holder, powder dipper or load data. Crimp is adjustable from taper to full roll crimp.
More

Lee Steel 3-die Reloading Set...

$32.00
eBay Lee Steel 3-die Reloading Set 30 Mauser 90755 Free Shipping
Free Shipping
/lee-steel-3die-reloading/56m-p38VlNSYRQYB9XxJkA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shell holder, Powder Measure, load chart and storage case included. Bullet seater die features an adjustable taper to roll crimp.
More

Lee Steel 3-die Reloading Set...

$34.00
eBay Lee Steel 3-die Reloading Set 30 Luger 90754 Free Shipping
Free Shipping
/lee-steel-3die-reloading/GpuDhjnhL_3dtQO-px0aoQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shell holder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp.
More

Lee Carbide 3-Die Set 45 GAP

$32.99
MidwayUSA Lee Carbide 3-Die Set 45 GAP
+ $7.59 shipping
/lee-carbide-3die-set-45/t4KA7SR9M3ZHVw385iV80A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Precision Precision...

$90.79
Walmart.com Lee Precision Precision Reloading Die Set, 50 BMG
Free Shipping
/lee-precision-precision/OB4aD8qkpVHVpci0poBJLw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Lee Precision Precision Reloading Die Set 50 BMG is easy to operate.
More

Lee Deluxe 3-die Reloading...

$36.00
eBay Lee Deluxe 3-die Reloading Set 30-30 Winchester 90631 Free Shipping
Free Shipping
/lee-deluxe-3die/_taiW1Kps33Sb-0WtyS5Gg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. Their Deluxe 3-Die Sets for rifle cartridges are no different. They are made to tight tolerances to help reloaders make consistent and accurate ammunition. These die sets are perfect for both beginning and seasoned reloaders. Each die is made of steel and the set comes with a full length sizing die, collet neck sizing die and bullet seating die. Reloaders use the full length sizing die to produce ammunition to factory-new specifications using new brass or brass cases that were fired in other guns. Full length sizing dies are also great for the reloader who wants to ensure each round loaded will chamber in their rifle with ease. The collet neck sizing die allows reloaders to produce... Less
More

90515 Lee 50 Bmg 2 Die...

$86.00
eBay 90515 Lee 50 Bmg 2 Die Reloading Set
Free Shipping
/90515-lee-50-bmg-2-die/XgASc3P_MO5QdXtJJsEV0w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
90515 Lee 50 BMG 2 Die Reloading Set Click to see supersized image   Descripti on Lee Large series (1 1/4x12 thread)  reloadin g 2-die set for 50 BMG. For use with the Classic Cast Press only. Set Includes: Full Length Sizing Die Bullet Seating Die Instructions Note: Does not include shell holder or powder dipper. Payment Please pay through PayPal Sales Tax- Missouri Residents Only Shipping Payments received before 9pm Central Standard Time ship the next day  (excluding weekends and holidays) Items ship USPS First Class Mail or USPS Priority Mail For special shipping request send an email No shipment to third party addresses   Thank s for stopping by.  Visit our eBay store for your other reloading needs.  Hope you have a great day   Pictures sell! Auctiva Free Image Hosting. Auctiva, THE... Less
More

Lee Deluxe 3-die Reloading...

$36.00
eBay Lee Deluxe 3-die Reloading Set For 22-250 Remington 90606 Free Shipping
Free Shipping
/lee-deluxe-3die/twldMu0ISXnbdvRTJiF3Jg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. Their Deluxe 3-Die Sets for rifle cartridges are no different. They are made to tight tolerances to help reloaders make consistent and accurate ammunition. These die sets are perfect for both beginning and seasoned reloaders. Each die is made of steel and the set comes with a full length sizing die, collet neck sizing die and bullet seating die. Reloaders use the full length sizing die to produce ammunition to factory-new specifications using new brass or brass cases that were fired in other guns. Full length sizing dies are also great for the reloader who wants to ensure each round loaded will chamber in their rifle with ease. The collet neck sizing die allows reloaders to produce... Less
More

Lee Carbide 3-Die Set 38...

$32.99
MidwayUSA Lee Carbide 3-Die Set 38 Short Colt, 38 Long Colt
+ $7.59 shipping
/lee-carbide-3die-set-38/40n0eh7QigAuvtd_k5xxQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Pacesetter 2-die...

$34.00
eBay Lee Pacesetter 2-die Reloading Set For 300 H&h 90560 Free Shipping
Free Shipping
/lee-pacesetter-2die/adMDd4gELjDefyl7wYfjNw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container
More

Lee Pacesetter 2-die...

$31.00
eBay Lee Pacesetter 2-die Reloading Set 38-56 Wcf Free Shipping
Free Shipping
/lee-pacesetter-2die/syZa7rbafoTSy7AVKuKjUg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Carbide 3-die Reloading...

$34.00
eBay Lee Carbide 3-die Reloading Set 41 Remington Magnum 90628 Free Shipping
Free Shipping
/lee-carbide-3die/P71wxp1U9yqH71ZOIPvNKg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shell holder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee 3-die Reloading Set For 8...

$44.97
eBay Lee 3-die Reloading Set For 8 X 57 Mauser With Factory Crimp 90544
+ $6.59 shipping
/lee-3die-reloading-set/Q8OuKp_a5RdDmDiZG2Lk_Q==/info
eBay
IN_STOCK ( In stock )
Pacesetter 3-Die Set  8 x 57mm Mauser (8mm Mauser) New 90544 Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958.  Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die.  Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty.  Adjust able crimp from slight taper to full roll. Dies Included: Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required: Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper, Load Data,  Plastic Storage Box _________________ __ _________________ ___________ WE WILL CONSOLIDATE SHIPPING... Less
More

Lee Deluxe 3-die Reloading...

$36.00
eBay Lee Deluxe 3-die Reloading Set 7mm Remington Magnum 90613 Free Shipping
Free Shipping
/lee-deluxe-3die/8EMshvtDC_Qes8TL-HF8rA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. Their Deluxe 3-Die Sets for rifle cartridges are no different. They are made to tight tolerances to help reloaders make consistent and accurate ammunition. These die sets are perfect for both beginning and seasoned reloaders. Each die is made of steel and the set comes with a full length sizing die, collet neck sizing die and bullet seating die. Reloaders use the full length sizing die to produce ammunition to factory-new specifications using new brass or brass cases that were fired in other guns. Full length sizing dies are also great for the reloader who wants to ensure each round loaded will chamber in their rifle with ease. The collet neck sizing die allows reloaders to produce... Less
More

Lee Carbide 3-Die Set 44...

$32.99
MidwayUSA Lee Carbide 3-Die Set 44 Russian
+ $7.59 shipping
/lee-carbide-3die-set-44/IqGQVBJCKaQSQubM9IYm_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 17 Remington 90770 Free Shipping
Free Shipping
/lee-pacesetter-2die/NOKooZJ4tTxdquMTeUPzfg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee .50 Bmg 2 Die Reloading...

$88.70
eBay Lee .50 Bmg 2 Die Reloading Set Lee 90515
+ $7.85 shipping
/lee-50-bmg-2-die/0ZfSrfNYRIVWZiyu1hVyLA==/info
eBay
IN_STOCK ( In stock )
The 4 Sportsmen eBay Listing Template HOME VIEW ALL LISTINGS ABOUT US FEEDBACK FAQ's Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest Lee .50 BMG 2 Die Reloading Set LEE 90515 Press capable of 1 1/4 - 12 threaded dies is required. Includes: Full Length Resizing Die Bullet Seating Die Case Instructions Condition: Factory New Type: Lee .50 BMG 2 Die Reloading Set Brand: LEE SKU: Lee 90515 UPC: 734307905156 Weight: 2 lbs 6 oz. Instructions: Not Available at this time. WARRANTY INFORMATION Our products are NEW IN BOX. These products are NOT factory returns, refurbished, or overruns. Products sold as such will be clearly labeled. All products come with factory warranty unless otherwise noted. Manufacture defects, warranty... Less
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 32 Winchester Special 90757 Free Shipping
Free Shipping
/lee-pacesetter-2die/O5PjF8uSp0JX27k2aR0OKQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Pacesetter 2-die...

$31.00
eBay Lee Pacesetter 2-die Reloading Set 338 Remington Ultra Magnum 90927
Free Shipping
/lee-pacesetter-2die/SYiOvpjUBNytlltGyommMg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Carbide 3-Die Set 10mm...

$32.99
MidwayUSA Lee Carbide 3-Die Set 10mm Auto
+ $7.59 shipping
/lee-carbide-3die-set/Vm_c_AwCA7tuhXuG10ao-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Pacesetter 3-die...

$34.00
eBay Lee Pacesetter 3-die Reloading Set 280 Remington, 7mm Express 90552
Free Shipping
/lee-pacesetter-3die/Xmhw5Lzq3NyXaM89dQmpcg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shell holder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shell holder Required:Yes Shell holder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 7x64mm Brenneke 90771 Free Shipping
Free Shipping
/lee-pacesetter-2die/Nn44yMU4vjbFv8D7DYn_4w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Carbide 3-die Reloading...

$32.00
eBay Lee Carbide 3-die Reloading Set 455 Webley Mark Ii 90764 Free Shipping
Free Shipping
/lee-carbide-3die/WrfD79xCgfdrNaTubMbh2w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shell holder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Steel 3-die Reloading Set...

$32.00
eBay Lee Steel 3-die Reloading Set 38-40 Wcf 90761 Free Shipping
Free Shipping
/lee-steel-3die-reloading/jAwcuW817_tnyy7nNV18Ig==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This die set includes a Full Length Sizer Die (with decapping unit), Powder Through Expander Die and a Bullet Seater Die which features an adjustable taper to roll crimp. Also includes a shell holder, powder dipper and plastic container. Cases must be lubed prior to sizing.
More

Lee Carbide 3-Die Set 500 S&W...

$32.99
MidwayUSA Lee Carbide 3-Die Set 500 S&W Magnum
+ $7.59 shipping
/lee-carbide-3die-set-500/l6ro2o05LncO_F0mkhIJjg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 350 Remington Magnum 90776 Free Shipping
Free Shipping
/lee-pacesetter-2die/-Rvc7rJDOmfzo3Tnoakv9A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Pacesetter 2-die...

$33.00
eBay Lee Pacesetter 2-die Reloading Set 30-284 Winchester 90951 Free Shipping
Free Shipping
/lee-pacesetter-2die/Vbj_NuhZ1t7rf5Ejp65JrA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Carbide 3-Die Set 38 Super

$32.99
MidwayUSA Lee Carbide 3-Die Set 38 Super
+ $7.59 shipping
/lee-carbide-3die-set-38/mXYiqfY6ogSMjmxzQZlAZg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Carbide 3-die Reloading...

$33.00
eBay Lee Carbide 3-die Reloading Set 454 Casull 90795 Free Shipping
Free Shipping
/lee-carbide-3die/4GDqMI-bSb6lByJHHNFRCg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shell holder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Pacesetter 3-die...

$34.00
eBay Lee Pacesetter 3-die Reloading Set 300 Winchester Magnum 90539 Free Shipping
Free Shipping
/lee-pacesetter-3die/yLmVZMKYInS3RHn7tKhusA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shell holder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shell holder Required:Yes Shell holder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

Lee Ultimate 4-Die Set 22-250...

$45.99
MidwayUSA Lee Ultimate 4-Die Set 22-250 Remington
+ $7.59 shipping
/lee-ultimate-4die-set/cEtG6kCVCZarYcsYJuutTA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Choose the Lee Ultimate Die Set for maximum versatility. The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns. The Collet Neck sizing die is used on your fire formed brass giving you best possible accuracy. No case lube required and cases last almost forever. The Easy Adjust Dead Length Bullet seating die foolproofs the bullet seating adjustment, and assures perfect seating depth every time. The Factory Crimp die provides a secure crimp on bullets with or without a crimp groove. In most cases it helps accuracy by providing a uniform higher start pressure and gives the finished cartridge Factory like accuracy and dependability. The set is complete, with shell holder, powder measure and famous Lee load data... Less
More

Lee Pacesetter 2-die...

$34.00
eBay Lee Pacesetter 2-die Reloading Set 35 Whelen 90752
Free Shipping
/lee-pacesetter-2die/LeLxy2vcpkWx8FYHButj3Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 284 Winchester 90777 Free Shipping
Free Shipping
/lee-pacesetter-2die/Gt5fjIa0zOlgy9U7Z4TX0A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Gunsmith And Reloading...

$39.84
Walmart.com Lee Gunsmith And Reloading Equipment
Free Shipping
/lee-gunsmith-and/SlVFShhMFwfkhpcAUZkpTw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Caliber: .270 WinchesterAdditio nal Features: Collet Rifle Die Set w/Shellholder
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 6.5mm Carcano 90749
Free Shipping
/lee-pacesetter-2die/Jxx7t5A867KUzALa3UH8RA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Pacesetter 2-die...

$32.00
eBay Lee Pacesetter 2-die Reloading Set 6.5mm Remington Magnum 90773 Free Shipping
Free Shipping
/lee-pacesetter-2die/lgRi8kT0uxCUl3N-7X1GZw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shell holder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

Lee Carbide 3-Die Set 9mm...

$32.99
MidwayUSA Lee Carbide 3-Die Set 9mm Luger
+ $7.59 shipping
/lee-carbide-3die-set-9mm/-jhzhWxyxBDBFhk3k81vRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lee Carbide 3-Die Set 45 Colt...

$32.99
MidwayUSA Lee Carbide 3-Die Set 45 Colt (Long Colt)
+ $7.59 shipping
/lee-carbide-3die-set-45/0LdMsCFvzbPrc6K0yquiiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint13-30486
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint13-30486