Category

Tools and Accessories
Showing results for "lathe unimat"
Results 1 - 40 of 1500+

Adjustable Tool Post For...

$39.00
eBay Adjustable Tool Post For Unimat 3 Lathe
+ $6.50 shipping
/adjustable-tool-post-for/cmp51u0qcLR0KOhOp-XSZA==/info
eBay
IN_STOCK ( In stock )
A adjustable Tool Post for the Unimat 3 Lathe that is new.The adjusting ring is 1 1/4 in diameter and it uses 1/4 tool bits or 5/16 shank tools.It has the extra height to reach the 23 mm (.905) from the top of the compound to the center line.The Tool Post and adjusting parts are made from prehardened and alloy steels for durability with a blackening finish.
More

Unimat Lathe Db200 Manual,...

$5.95
eBay Unimat Lathe Db200 Manual, Parts List, Machining Techniques, Pdf Computer Format
Free Shipping
/unimat-lathe-db200/0BSOsSOjDab6PijruglJLg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NOTE: This is a Computer File not a printed manual. This is an Adobe®PDF scanned from an original Unimat Miniature Machining Techniques Manual printed by American Edeistaal Inc. in 1963. This was the manual included with the Unimat DB200 machine. The manual has 39 pages of excellent information on the machining of metal, plastic, and wood with various techniques explained.The index page is hyper-linked to the manual pages and each manual page has a return link back to the index page. Just one
More

Unimat Replacement Drive...

$8.64
eBay Unimat Replacement Drive Belts For The Db Sl Lathe, Emco, Belt, 3 Sets
+ $2.65 shipping
/unimat-replacement-drive/3LAxpsiGqHNFfNCnhZyl1w==/info
eBay
IN_STOCK ( In stock )
Up for your consideration are replacement drive belts for the Unimat DB, DB200, SL or SL1000 lathes. You are getting 3 sets/6 total belts, they are new and fit great. The belts are ready to be used and do not need to be cut, welded, fused or glued together. One belt runs from the motor pulley to the idler pulley and the other belt goes between the idler pulley and the drive pulley on the head stock. Please note the assembly, as you see them pictured (lathe is not included). • I ship out daily
More

Rotating Mill Vise Base For...

$70.00
eBay Rotating Mill Vise Base For Unimat Lathe Db200 /sl1000
+ $5.00 shipping
/rotating-mill-vise-base/-LtBGZ_cqgk4wlq2QJT-kg==/info
eBay
IN_STOCK ( In stock )
Rotating Mill Vise Base for UNIMAT SL1000 or DB200. This base will allow your UNIMAT vise to be rotated to any angle. The black anodized base is engraved with angle measurements in 5° increments all the way around. A witness mark is engraved on the side of the rotating base that holds the vise. A locking plate underneath pulls the rotating base down onto the base to lock it securely when the two hold-down screws are tightened. The rotating vise base eliminates clamping and unclamping the vise
More

Adjustable Tool Post For...

$39.00
eBay Adjustable Tool Post For Unimat Sl Db Lathe
+ $6.50 shipping
/adjustable-tool-post-for/FBRWeOIInHXVlWfrveRcJA==/info
eBay
IN_STOCK ( In stock )
A adjustable Tool Post for the Unimat SL Lathe that is new.The adjusting ring is 1 1/4 in diameter and it uses 1/4 tool bits or 5/16 shank tools.The Tool Post and adjusting parts are made from prehardened and alloy steels for durability with a blackening finish.Tool bit not included.
More

(1) Bondhus 5mm Hex Wrench...

$9.00
eBay (1) Bondhus 5mm Hex Wrench For The Unimat Lathe
+ $3.45 shipping
/1-bondhus-5mm-hex/97DhU-H-Ud_4oOwZRySwWw==/info
eBay
IN_STOCK ( In stock )
Up for your consideration is a Bondhus 5 mm hex wrench for the Unimat lathe. This wrench is new, never used. The wrench is made in the USA with a nice rubber grip “T” handle. Pictured is one long with a ball end. And the other is shorter without the ball end. I have been told that the shorter wrench is preferred for better control, balance and the wrench stays in the head of the screw better. This listing/sale is for only one of the wrenches that is pictured , a short or a long. When paying
More

Replacement Drive Belts For...

$9.19
eBay Replacement Drive Belts For The Emco Unimat 3&4 Lathe, Belt, 3 Sets
+ $2.65 shipping
/replacement-drive-belts/v4G1nx55r8MIFXhmlb0Jyg==/info
eBay
IN_STOCK ( In stock )
Up for your consideration are replacement drive belts for the Unimat 3 or 4 lathes. You are getting 3 sets/6 total belts, they are new and fit great. The belts are ready to be used and do not need to be cut, welded, fused or glued together.One belt runs from the motor pulley to the idler pulley and the other belt goes between one of the two choices on the idler pulley and the drive pulley on the head stock. Or, you can use the larger belt and run it from one of the two choices on the motor pull
More

2 X 3-jaw Self-centering...

$84.95
eBay 2 X 3-jaw Self-centering Lathe Chuck M12x1 Thread For Unimat Sl & Db Lathes
+ $5.95 shipping
/2-x-3jaw-selfcentering/L4-3O-hfOkcFcX4nRhTPug==/info
eBay
IN_STOCK ( In stock )
ebay template Title: 2 x 3-Jaw Self-Centering Lathe Chuck M12x1 Thread For Unimat SL DB Lathes New eBay Item Specifics: MODEL 2 x 3-Jaw Self-Centering Chuck w/ M12 x 1 Threads COMPATIBLE WITH: M12 x 1 Thread on Chuck Fits UNIMAT SL DB Lathes Condition Description: New Buy It Now Price: $84.95 Description: This is a 2diameter x 3-Jaw Self-Centering (Simultaneous) Mini Lathe Scroll Chuck with a M12x1 Female Threads to fit Unimat SL DB Lathes .This beautiful professional quality chuck has the f
More

Replacement Drive & Power...

$8.64
eBay Replacement Drive & Power Feed Belts For The Emco Unimat 3&4 Lathe, Belt,2 Sets
+ $2.45 shipping
/replacement-drive-power/Ct7WzaV-C2utqS709bD-iQ==/info
eBay
IN_STOCK ( In stock )
Up for your consideration are replacement drive belts and the power feed belt for the Unimat 3 or 4 lathes. You are getting 2 sets/6 total belts, they are new and fit great. The belts are ready to be used and do not need to be cut, welded, fused or glued together. The Unimat lathe that you see in the picture is for illustration only and is not included. Only the belts that you see pictured are being sold. • I ship out daily (except Sunday Holidays) and process items within 24 hrs of payment.
More

1 & 13/16 Round And Hex Die...

$53.50
eBay 1 & 13/16 Round And Hex Die Holder For Unimat Sl/db Lathe
+ $6.50 shipping
/1-1316-round-and-hex/5S7hMxTH3_S4hI5E_IBxFg==/info
eBay
IN_STOCK ( In stock )
New tailstock mounted 1 Round or Hex Die Holder and 13/16 Die Adapter for the Unimat SL/DB Lathe.It is made to use 1 round,1 hex or 13/16 dies which gives you more choices so you can purchase dies locally,quicker and often cheaper than industrial suppliers without having to wait for someone to ship it to you,especially in rural areas.The Die Holder is 1.72 long with a clearance hole of 17/32 by 1 deep from the face of the die with a 19/64 hole going into the tailstock ram.This enables
More

2 X 3-jaw Mini Lathe Chuck...

$82.50
eBay 2 X 3-jaw Mini Lathe Chuck Self-centering Reversible Jaws Mt2 Arbor Unimat
+ $5.95 shipping
/2-x-3jaw-mini-lathe/RSSC6JEGPrd2TY9xs3k6lA==/info
eBay
IN_STOCK ( In stock )
ebay template Title: 2 x 3-Jaw Mini Lathe Chuck Self-Centering Reversible Jaws MT2 Arbor Unimat New eBay Item Specifics: MODEL 2 x 3-Jaw Self-Centering Chuck w/ MT2 Arbor COMPATIBLE WITH: M12x1 Thead on chuck fits Unimat SL Series Lathes Condition Description: New Buy It Now Price: $82.50 Description: This is a 2diameter x 3-Jaw Self-Centering (Simultaneous) Mini Lathe Scroll Chuck with a MT2 Arbor .This beautiful professional quality chuck has the following specifications: BODY IS 2 IN DIAM
More

Special Nut/pulley For Power...

$23.88
eBay Special Nut/pulley For Power Feed On Unimat Db200 & Sl1000 Lathe, Jam,
Free Shipping
/special-nutpulley-for/CWg-Z7mKP-qFu-QlAtGhlw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Up for your consideration is the special Nut/Pulley that is needed when you have the power feed attachment on a Unimat DB200 SL1000 lathe. You replace the head stock jam nut with this Nut/Pulley. It has a M12 X 1 threaded hole with 19mm hex. They were custom made for me by a very skilled tool die/clock maker. The quality is over the top. You can also use this Nut/Pulley as a regular jam nut. The picture is a stock photo of the actual item being sold. • I ship out daily (except Sunday Holidays
More

Boring Bar Holder & Bar For...

$38.50
eBay Boring Bar Holder & Bar For Unimat Sl/db, 3, Craftsman 109 Or Sherline Lathe
+ $6.50 shipping
/boring-bar-holder-bar/liyAMj_jeN_P7cttJELowg==/info
eBay
IN_STOCK ( In stock )
A Boring Bar Holder for the Unimat or similar small Lathes that self centers any diameter of bar within its capacity in the vertical.The centering is done by a internal V machined inside the hole.The holder will take 1/16 and other small D - type boring bars up to 3/8.From the center of the V to the bottom of the tang,the dimension is 3/16 which was specifically made to be used in my Rocker Tool Posts.As you can see in the pictures with the 1/16 shim the height dimension can be increased to
More

Boring Head For The Unimat

$69.99
eBay Boring Head For The Unimat
Free Shipping
/boring-head-for-the-unimat/n-KIaNsBUCVhNLQbZ2bc9A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1 boring head for the unimat 1 boring head takes 3/8 boring bars M12x1 thread The tool is made from all steel Includes 3/8 boring bar here is the link to watch the video http://youtu.be/V0 t0-Dct8D0 Boring holes on a mill is very similar to boring holes on a lathe except the cutting tool moves rather than the part. The main advantage of boring over drilling is that the hole will always come out in perfect alignment with the spindle whereas a drill may wander. Larger holes must be bored rathe
More

2 Cobalt Mini Lathe 1/4 Part...

$24.50
eBay 2 Cobalt Mini Lathe 1/4 Part Cut-off Grooving Bits Machinist Gunsmith Unimat Lot
Free Shipping
/2-cobalt-mini-lathe-14/xQHXdl1USfu9x6b-K1XB2w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ebay Base This  sale is for 2 Cobalt alloy grooving part cut-off lathe bits in 1/4 shank. These Quality Brand name bits are: Mo-Max Cobalt, type M33 alloy by Cleveland Twist Drill. The cutting widths are .071 .093 The bits are razor sharp and ready to use.Made in USA is  our primary focus. Only the best of the best tools, that a Machinist  can be proud of, are at auction  Here . We never auction any Chinese or Indian,  Harbor Freight Garbage! Please look at the pictures carefully before yo
More

Unimat Lathe M12 - 1/2-20...

$33.33
eBay Unimat Lathe M12 - 1/2-20 Jacobs Drill Chuck Adapter In Steel -- From Lathecity
+ $4.00 shipping
/unimat-lathe-m12-1220/sK3WvE91Hx9OLfmWDxvimQ==/info
eBay
IN_STOCK ( In stock )
UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-1.0 mm bushings to 1/2”-20 pin end, steel, hex Size: Metric M12-1.0 mm bushings (threaded hole) to English 1/2”-20 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. The accessory is tested on an UNIMAT SL DB 200 Materials: Steel, hex bar - the hex shape allows for easy mounting on the lathe spindle Options: M12 = M14 = same price, but need to be made. All LatheC
More

Boring Head For The Unimat...

$69.99
eBay Boring Head For The Unimat Sl1000/db200
Free Shipping
/boring-head-for-the/X6CdIcszviU9qukwGyOVRA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1 boring head for the unimat 1 boring head takes 3/8 boring bars M12x1 thread The tool is made from all steel Includes 3/8 boring bar here is the link to watch the video http://youtu.be/V0 t0-Dct8D0 Boring holes on a mill is very similar to boring holes on a lathe except the cutting tool moves rather than the part. The main advantage of boring over drilling is that the hole will always come out in perfect alignment with the spindle whereas a drill may wander. Larger holes must be bored rathe
More

Unimat Lathe M12 - 3/8-24...

$29.99
eBay Unimat Lathe M12 - 3/8-24 Jacobs Drill Chuck Adapter In Steel -- From Lathecity
+ $4.00 shipping
/unimat-lathe-m12-3824/xOgB5SODt__qyztQYM2X-A==/info
eBay
IN_STOCK ( In stock )
UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-1.0 mm bushings to 3/8”-24 pin end, steel, hex Size: Metric M12-1.0 mm bushings (threaded hole) to English 3/8”-24 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. The accessory is tested on an UNIMAT SL DB 200 Materials: Steel, hex bar - the hex shape allows for easy mounting on the lathe spindle Options: Aluminum version and/or M14-1.0 on request or/and alrea
More

Unimat Db/sl Lathe Power Feed...

$19.99
eBay Unimat Db/sl Lathe Power Feed Adaptor Works With X & Y Axis
Free Shipping
/unimat-dbsl-lathe-power/s0jXp9vwkxqCOTZ3c1Wjaw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat lathe power feed adaptor. works with X amp; Y axis.Requires a variable speed drill with 3/8 capacity . not included Lathe and other tools are NOT Included.Fits Unimat only.Video http://youtu. be/l3LZF8E6FOs
More

Buddy Bar For Unimat Lathe -...

$12.99
eBay Buddy Bar For Unimat Lathe - Unimat Sl Db - Align Your Lathe - From Lathecity
+ $2.50 shipping
/buddy-bar-for-unimat/KuFNDKNuZ8qEuiXdV9IpbA==/info
eBay
IN_STOCK ( In stock )
UNIMAT Lathe Accessory Align you lathe perfectly to machine pieces with small run-out Buddy Bar Size: Double pin end (tool steel) that fits perfectly in the UNIMAT SL DB lathe spindle and tailstock spindle. Purpose of that tool: If one wants to machine pieces with a small run-out (high centricity), the work piece must be perfectly center drilled. That doesn’t work too easily on an UNIMAT SL DB since the headstock is rotatable and it is only aligned with a pin. Even if that pin is used, one ca
More

Unimat Motor Brushes Set Of...

$45.00
eBay Unimat Motor Brushes Set Of Two U-90 Ug7750 Unimat 3 & 4
Free Shipping
/unimat-motor-brushes-set/OdFF2ObSH8elX-Y-6NCtXg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat Motor Brushes, set of two. I have these custom made to exact dimensions and specifications as the original brushes. These new brushes will fit: U-90 UG 7750 (Needs alterations) Older Holland Motor (the one with the black plastic ends) Unimat 3 4 motors (also a UG 7750, needs alterations) Please click on a picture to enlarge If you don't see what you need for your Unimat, email or call me, Tom, at 413-267-9257 (tom at tomstoolstore dot com) as I stock many used Unimat parts and would be h
More

Unimat Sl1000 / Db200 Lathe,...

$148.00
eBay Unimat Sl1000 / Db200 Lathe, Cnc Conversion Kit ( Option 1 )
+ $8.50 shipping
/unimat-sl1000-db200/XPvIeEqjKOV68rZYKeWWSA==/info
eBay
IN_STOCK ( In stock )
Unimat SL1000 / DB200 Lathe CNC Conversion Kit This kit is Option 1. Option 1: Includes MECHANICAL PARTS ONLY. Electronics, miscellaneous wires, an enclosure and assembly are not included. The CNC Conversion kit is designed for hobbyists, education, and R D alike and can adapt to a wide variety of projects- prototyping, model making, customization - even light production. With this CNC Conversion kit lathe both MANUAL and CNC operations are provided. With this CNC Conversion kit, you will be ab
More

Unimat A Pair Of Carbon...

$28.50
eBay Unimat A Pair Of Carbon Brushes For U-90 & Ug-7750 (new)
Free Shipping
/unimat-a-pair-of-carbon/pfDulZ4ah0ftKh4gwi8mgA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
UNIMAT MOTOR CARBON BRUSHES.CARBON BRUSH FIT ON YOUR UNIMAT MOTORS U-90 AND UG-7750 OR UNIMAT 3 4.THIS SALE IS 2 PIECES CARBON BRUSHES COMPLETE WITH SPRING AND READY REPLACING.PLEASE SEE PICTURE FOR ACTUAL BRUSHS YOU ARE BUYING.EMAIL IF ANY QUESTION YOU MAY HAVE. INTERNATIONAL BIDDER/BUYER PLEASE EMAIL FOR SHIPPING QUOTE.Thank you for viewing.*Check out my other items !
More

Unimat Parts Db 200/sl 1000...

$30.00
eBay Unimat Parts Db 200/sl 1000 Adjustable Pot Chuck For Live Center 1221
Free Shipping
/unimat-parts-db-200sl/_s7VdQhw4afvYkZp6LKfAw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat DB 200 or SL 1000 Double Bearing Live Center # 1221 Pot Chuck. This device is used like a 4 jaw chuck on the tail stock. If you needed to adjust the tail end of a workpiece or hold a work piece and make a spot for the steady rest before centering, maybe a piece of wood stock that was out of round? Hundreds of uses. This will fit in your Unimat Live center, either the 1220 or the 1221. I also sell this as an assembly complete. Click here to see listing. Ebay Pot Chuck Listing Procedure is
More

Buddy Bar Mt0 To Mt0 -...

$24.99
eBay Buddy Bar Mt0 To Mt0 - Unimat/craftsman - Align Your Lathe - Lathecity
+ $4.00 shipping
/buddy-bar-mt0-to-mt0/JS7oqieFGR5YSTkWZ7HOEQ==/info
eBay
IN_STOCK ( In stock )
Align you lathe perfectly to machine pieces with small run-out Budy Bar - make sure you order the right taper size, this here is MT0-MT0 Morse taper #0 on both ends Size: Double pin end Morse #0 to Morse #0. Other sizes can be made or are already available at eBay such as MT0-MT0, MT3-MT2, UNIMAT alignment pin, MT1-MT0 Where may this fit? -) MT0-MT0 is used on Craftsman with retrofitted spindles (original Craftsman would need a slightly different size)-) MT0-MT0, UNIMAT's with LatheCity spindle
More

Unimat Parts Db 200/sl 1000...

$13.50
eBay Unimat Parts Db 200/sl 1000 T-slot Adapter Screw
Free Shipping
/unimat-parts-db-200sl/8ORTtwy9pk1gQ0UP5KLQ5A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat DB 200 or SL 1000 T-Slot Adapter Screw # 105/05. Thread size 12MM X 1. Will not fit the Unimat 3. New, Never Used. This screw fits the T-Slot in the Unimat cross slide, and has the same thread as the Unimat Lathe spindle. Thus, you can take any Unimat lathe spindle accessory (such as faceplate, lathe or collet chucks) and mount the accessory into the Unimat cross slide! As a result, lathe and collet chucks offer extra versatility as precision circular vises, idealy suited for chucking an
More

Unimat (5mm) Bondhus Hex...

$10.00
eBay Unimat (5mm) Bondhus Hex Wrench T-handle Ball End
+ $3.50 shipping
/unimat-5mm-bondhus-hex/Fs1qJjRW0824VwK5cIY8nQ==/info
eBay
IN_STOCK ( In stock )
TOMSTOOLSTORE On Ebay (413) 267-9257 Anytime _________________ __Your Source For Unimat Parts _________________ __ New, never used Bondhus Prohold Ball End 5 MM T-Handle. I have now found this to be the best I have ever used, the handle is weighted, this is nice because when you have the screw loose and give it a twist between your fingers, the weight is like a flywheel, keeps the screw turning easily to extraction. The ball end is nice as well especially on the bolt for the Feed Attachment, the
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 16 Tpi
Free Shipping
/unimat-db-sl-master/xatDvYLJfCKtGnvuI9TYJw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #16 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

A2z Qctp Quick Change...

$99.95
eBay A2z Qctp Quick Change Toolpost Unimat Lathes Usa Made Ship Free Us
Free Shipping
/a2z-qctp-quick-change/ggkl8HVsra1Ay4gQ9HGcIw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A2Z CNC brand Quick Change Toolpost QCTP for Unimat 3, 4, SL, DB 3.6X8 Lathes.See separate listing for 10X lathe. The Best Value In a Deluxe USA Made QCTP Special: Free Domestic USPS Priority shipping! $12.00 international USPS First Class Shipping! www.A2ZCorp.us This QCTP received a great review in Home Shop Machinist magazine Sept/Oct 2005 Made in the USA on our own new Haas CNC equipment by people born and rasied in the USA and sold direct by the manufacturer Improved design of a classic la
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Dimensions L x W x H in. 117 x 40 x 48, Carriage Travel in. 55, Width Between Centers in. 60, HP 7.5, Thread Cutting in. 1 5/8-72, Volts 230/460V pre-wired 230V, Stand Included Yes, Thread Cutting mm 0.05-20, Spindle Speeds qty. 12, Speed RPM 42-1,800. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Laser Protractor / Morse...

$59.99
eBay Laser Protractor / Morse Taper Cutter For Unimat Sl Db Lathe - From Lathecity
+ $5.25 shipping
/laser-protractor-morse/PEYJ_b-fGl142NL0ZyATAg==/info
eBay
IN_STOCK ( In stock )
LASER protractor / Machine taper cutter for UNIMAT SL DB lathe from LatheCity What does this tool do? One can cut Morse Taper and Morse arbors easily even on a small home shop lathe. Since labor costs are not an issue for hobby type work, you can make these accessories by yourself for close to zero dollars. All you need to do is setting the cutting angle precisely enough. Our LASER protractor is exactly doing this for you, making the entire process a piece of cake. Cutting a perfectly fitting M
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 20 Tpi
Free Shipping
/unimat-db-sl-master/1sQe9l8q2YDxK2Pcyv9TAg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #20 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 24 Tpi
Free Shipping
/unimat-db-sl-master/SUAcan2snzwe_wnP0r1lGw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #24 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 18 Tpi
Free Shipping
/unimat-db-sl-master/_Em_sJ6I8jEvZhiU4ixGrw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #18 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

T-nuts For Unimat Db200/...

$15.00
eBay T-nuts For Unimat Db200/ Sl1000 Milling Table
+ $3.00 shipping
/tnuts-for-unimat-db200/_W7ElOTZIQ75EGtbOFzbgw==/info
eBay
IN_STOCK ( In stock )
T- Nuts for Unimat Milling Table Quantity: 6 pcs. Made from 1010 Steel with M6-1 Thread. T- Nut has a larger foot print compared to the original. Made in the USA. Shipping cost within US is $3.00
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 28 Tpi
Free Shipping
/unimat-db-sl-master/e42LPlegAmCfeS0_LC-LUQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #28 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Unimat Db / Sl Master Thread...

$49.99
eBay Unimat Db / Sl Master Thread Pattern & Follower No.1271, Size 32 Tpi
Free Shipping
/unimat-db-sl-master/fomCp9f-UjRpJ7a0N4D4Cw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat thread pattern amp;amp; follower, size #32 TPI -- for use with Unimat thread chasing attachment #1270. Purchasing Information: Cleared funds are required prior to shipment Payment methods include VISA/Master Card, wire transfer, certified check and paypal Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355