Lathe Threading Tools Home and Garden - Shopping.com
Showing results for "lathe threading tools"
Results 1 - 40 of 1500+

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/S0he5XLQ6foNIWfRrskJ6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

SHOP FOX M1015 Micro Lathe...

Free Shipping
2 stores SHOP FOX M1015 Micro Lathe (754001510159)
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/65KXlmjdDSFWNlXJ3t4s_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More
Handle length 12-inHead weight 1 3/4-LbHeight 1.7-in Length 11.9-in Width 4.2-inHandle made from...
More

PTG Barrel Threading Lathe...

$36.05
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 5/16
+ $4.99 shipping
/ptg-barrel-threading/Tkvk0JCIBixp71RVbZ4Abg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

PTG Barrel Threading Lathe...

$35.99
MidwayUSA PTG Barrel Threading Lathe Bit Square 3/8
+ $4.99 shipping
/ptg-barrel-threading/-jxeTrUz_k3YwbqfwDf87g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The square bit cuts a true 10 threads per inch square thread for 03 Springfields and Enfields. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

1 Lathe Thread Tool + 10 Pc

$69.00
eBay 1 Lathe Thread Tool + 10 Pc
Free Shipping
/1-lathe-thread-tool-10/DiTvG3q8MI2s0id66vJDkA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
WE HAVE ALL SIZES IN STOCK UP TO 1 DIA ALSO BORING BARS TAKE A LOOK AT OUR OTHER AUCTION MOST ITEMS ARE FREE SHIPPING NEW SE DO COMBINE SHIPPING 30 DAY RETURN POLICY WE DO COMBINE SHIPPING NO CHARGE AS LONG AS WE CAN FIT IN A FLAT RATE BOX 14 DAY RETURN POLICY
More

Lathe Threaded Spindle...

$23.95
eBay Lathe Threaded Spindle Adapter Bushing 1-8 To 1-1/2-8 To Mount Chuck To Spindle
No Shipping Info
/lathe-threaded-spindle/7jbVrB2GMQUtPT07hfDNcA==/info
eBay
IN_STOCK ( In stock )
Title:Lathe Spindle Adapter Bushing: 1-8 TPI to 1-1/2-8 TPI Description:This is a Machined Steel Lathe Spindle Adapter with black oxide finish.LABAR418 1x8 ID to 1-1/2x8 OD Please study the pictures and email with any questions. Thanks for stopping by.FAST SHIPPING INCLUDED IN THE USA.Approximate shipping weight is 12 oz.
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Brownells High-Speed Steel...

$85.00
Brownells Brownells High-Speed Steel Cutting Kits For Lathes - 1/2 Threader Kit - 1/2 Threader Kit
+ $7.95 shipping
/brownells-highspeed/NnBtfvxq4km0ScReCLVEUA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes one ½ square bar, 5 long with offset end pocket for cutting ID and OD threads; plus, two high-speed steel inserts, TNMC-32NV and TPMC-32NV. Mfg: Brownells SPECS: Bar - .500 shank, 5.0 OAL, with end pocket offset for ID and OD threads, 1.375... Less
More

T6 Dtm Lathe Threading Blade...

$34.99
eBay T6 Dtm Lathe Threading Blade Tool
Free Shipping
/t6-dtm-lathe-threading/kIvDBBl8kmhFNB05rxewQw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
T6 DTM Threading Blade Tool For use with DTM-8A and DT-8 holders. High Speed Steel 60 Degree blade 6 Teeth Per Inch or more. This is slightly beefier than the 10 tooth inserts and slightly weaker than a 4 TPI blade. (Nothing to worry about) This is a great insert to try if you are not sure which one to use. Quality USA Made! Free shipping to the USA on as many as you care to buy! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
More

4-jaw X 3 Self-centering...

$123.95
eBay 4-jaw X 3 Self-centering Lathe Scroll Chuck Threaded For 1-8 Spindles
No Shipping Info
/4jaw-x-3-selfcentering/L5Zcy5yMr6-JApJk9M3Qbw==/info
eBay
IN_STOCK ( In stock )
Description: This is a 3 diameter x 4-Jaw Self Centering (simultaneous) Lathe Scroll Chuck that is female threaded 1-8. Here are the specs: 3 x 4-jaw lathe scroll chuck Body is 3 in diameter x 1 thick (jaws project .8 out from body) Includes (4) reversible jaws Can hold a variety of round or square stock Knurled adjustment plate for quick easy set up Includes two 4 wrench bars for final tightening Fits 1 x 8 TPI Spindles Smallest outside diameter gripped by jaws: .074 Largest outside di
More

T10 Dtm Lathe Threading Blade...

$34.99
eBay T10 Dtm Lathe Threading Blade Tool
Free Shipping
/t10-dtm-lathe-threading/Cmwo-WUkzg9BdcrguX8Hvw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
T10 DTM Threading Blade For use with DTM-8A and DT-8 holders. High Speed Steel 60 Degree blade 10 Teeth Per Inch or more. This is slightly weaker than a 4 or 6 TPI blade. (Nothing to worry about) This is a great blade to use for smaller jobs where you need to get closest to a shoulder. Quality USA Made! Free shipping to the USA on as many as you care to buy! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
More

JET 321491 GH-1860ZX Lathe...

Free Shipping
4 stores JET 321491 GH-1860ZX Lathe with 2-Axis ACU-RITE 200S DRO and Collet Closer Installed (662755918261)
GH-1860ZX Lathe with 2-Axis ACU-RITE 200S DRO and Collet Closer Installed - 321491. 10-in 3-Jaw...
More

3/8 Lathe Thread Tool + 10 Pc

$49.00
eBay 3/8 Lathe Thread Tool + 10 Pc
Free Shipping
/38-lathe-thread-tool/-P6jqAoFWY_9NbFQwM2WhA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW 160 DAY RETURN POLICYWE DO COMBINE SHIPPING ALSO WE HAVE MORE INSERTS LISTED ON OUR OTHER AUCTIONS WE DO HAVE ALL SIZES INSTOCK 3/8 TO 1 DIA ALSO BORING BARS WITH INSERTS
More

3/4 Lathe Thread Tool + 10 Pc

$69.00
eBay 3/4 Lathe Thread Tool + 10 Pc
Free Shipping
/34-lathe-thread-tool/Kes_I3lpcu-rLFawF7tfOQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
WE HAVE ALL SIZES IN STOCK UP TO 1 DIA ALSO BORING BARS TAKE A LOOK AT OUR OTHER AUCTION MOST ITEMS ARE FREE SHIPPING NEW SE DO COMBINE SHIPPING 30 DAY RETURN POLICY WE DO COMBINE SHIPPING NO CHARGE AS LONG AS WE CAN FIT IN A FLAT RATE BOX 14 DAY RETURN POLICY
More

Wmh Tool Group Jet 321121...

Free Shipping
3 stores Wmh Tool Group Jet 321121 BDB-1340A-200S 13-Inch Swing by 40-Inch 230-Volt 1 Phase Belt Drive Metalworking Lathe wi...
BDB-1340A Lathe with ACU-RITE 200T DRO Installed - 321121. Oil Pan. 6-in 3-Jaw Direct Mount Scroll...
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443