Category

Tools and Accessories
Showing results for "jewelry clamps"
Results 1 - 40 of 1500+

Walnut Hollow Bench Clamp...

$40.36
Sears Marketplace Walnut Hollow Bench Clamp Craft Hobby Jewelry Vice
No Shipping Info
/walnut-hollow-bench-clamp/0v9zBNDBeULXkMf5I904wg==/info
Sears Marketplace
IN_STOCK ( In stock )
Color: Silver Features: 360 swivel Clamp and 90 tilt. Ball and socket base with lock-down adjustment Solid cast aluminum with soft rubber grips Instructions WALNUT HOLLOW-Clay Extruder Table Clamp. This table clamp is designed to be used the Walnut Hollow Clay Extruder Set (sold separately) but can also be used in a variety of other projects whenever a table clamp is needed. It is made of solid cast aluminum and has soft rubber grips inside the clamp jaws. It swivels a full 360-degrees; tilts 90-degrees; and the clamp jaws open 2 inches wide. It features a ball and socket base with lock-down adjustment and can be clamped onto most any desk; table; or other flat work surface up to 2 inches thick. Each package contains one Table Clamp. Imported.
More

Bench Pin With Anvil Clamp...

$17.25
eBay Bench Pin With Anvil Clamp Jewelry Making Bench Tool
Free Shipping
/bench-pin-with-anvil/UO8kf5KK2PcgU12KN6fhJw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BENCH PIN WITH CAST IRON ANVIL - CLAMP-ON JEWELRY MAKING COMBINATION ANVIL Bench Pin Combination Anvil used for jewelry making. Easily clamps on to any workbench, desk, counter or table. Provides an anvil surface along with the basic Jewelers bench pin.
More

Walnut Hollow Bench Clamp...

$38.24
Sears Marketplace Walnut Hollow Bench Clamp Craft Hobby Jewelry Vice
No Shipping Info
/walnut-hollow-bench-clamp/BZ0X0Hvl1A3exhfCOg3vTg==/info
Sears Marketplace
IN_STOCK ( In stock )
Color: Silver Features: 360 swivel Clamp and 90 tilt. Ball and socket base with lock-down adjustment Solid cast aluminum with soft rubber grips Instructions WALNUT HOLLOW-Clay Extruder Table Clamp. This table clamp is designed to be used the Walnut Hollow Clay Extruder Set (sold separately) but can also be used in a variety of other projects whenever a table clamp is needed. It is made of solid cast aluminum and has soft rubber grips inside the clamp jaws. It swivels a full 360-degrees; tilts 90-degrees; and the clamp jaws open 2 inches wide. It features a ball and socket base with lock-down adjustment and can be clamped onto most any desk; table; or other flat work surface up to 2 inches thick. Each package contains one Table Clamp. Imported.
More

Bench Pin & Anvil Combination...

$17.94
eBay Bench Pin & Anvil Combination Clamp Jewelry Watchmakers Hobby Solid Steel
Free Shipping
/bench-pin-anvil/vZFG4L7pQXWpi06mios1Xw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BENCH PIN ANVIL COMBINATION CLAMP JEWELRY WATCHMAKERS HOBBY SOLID STEEL This is an essential tool for any work bench or table. Easily clamps to the workbench. Has a flat polished anvil for layout work, together with a replaceable hardwood bench pin for various other jobs. Features a smoothly finished flat anvil. Replaceable wood bench pin measures 1-3/4 wide by 4 long. Clamp adjusts for benches up to 2 thick. - Anvil: Cast Iron - Pin: Hard wood - Pin measures: 1-3/4x 4- Total weight: 3
More

Walnut Hollow Bench Clamp...

$41.17
Sears Marketplace Walnut Hollow Bench Clamp Craft Hobby Jewelry Vice
No Shipping Info
/walnut-hollow-bench-clamp/EuA9jm32Yq_9rS2EWwMn4Q==/info
Sears Marketplace
IN_STOCK ( In stock )
WALNUT HOLLOW-Clay Extruder Table Clamp. This table clamp is designed to be used the Walnut Hollow Clay Extruder Set (sold separately) but can also be used in a variety of other projects whenever a table clamp is needed. It is made of solid cast aluminum and has soft rubber grips inside the clamp jaws. It swivels a full 360-degrees; tilts 90-degrees; and the clamp jaws open 2 inches wide. It features a ball and socket base with lock-down adjustment and can be clamped onto most any desk; table; or other flat work surface up to 2 inches thick. Each package contains one Table Clamp. Imported.
More

Engraving Engraver Jewelry...

$55.00
eBay Engraving Engraver Jewelry Clamps Jigs Holders
+ $9.78 shipping
/engraving-engraver/ARGKMROp_VoKhoeHhy_5Lw==/info
eBay
IN_STOCK ( In stock )
Pen Seal Jigs - 50-9463 This is a double-sided jig that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal or other cylindrical item. Fits Dahlgren Wizzards and most New Hermes pantographs, and other common computerized engravers including Vision, Xenetech, Domiteaux, H-Square. Includes top and bottom holders, both are the same as illustrated. Black anodized finish. Dimensions: (each) 3.125 x 1.50 x .375. Hold down screws: 1
More

Magnifying Glass Helper...

$7.95
eBay Deals Magnifying Glass Helper Adjustable Clamp Clip Magnifier Soldering Jewelry Repair
Free Shipping
/magnifying-glass-helper/wPTwkUi13o_KWSpH8gePKg==/info
eBay Deals
IN_STOCK ( In stock )
Free Shipping
More

Engraving Engraver Jewelry...

$49.95
eBay Engraving Engraver Jewelry Clamps Jigs Holders
+ $9.78 shipping
/engraving-engraver/6d4CbAYr-jsH_agdmYmVRg==/info
eBay
IN_STOCK ( In stock )
Dual Sided Jewelry Plate Holders - 50-9341 Dual sided jig. Allows engraving on smaller flat objects like charms and small jewelry. Flat side is great for those smaller plates. Fits Dahlgren Wizzards and most New Hermes pantographs, and other common computerized engravers including Vision, Xenetech, Domiteaux, H-Square. Includes top and bottom holders, both are the same as illustrated. Includes top and bottom holders as show. Anodized for long life. Great for jewelry and charms with eyelets and
More

Peg Clamp Universal Work...

$11.35
eBay Peg Clamp Universal Work Holder Jewelers Engraving Hand Tool For Jewelry Making
+ $2.76 shipping
/peg-clamp-universal-work/Zc8ChoEl98CPcdBtMwBv6Q==/info
eBay
IN_STOCK ( In stock )
PEG CLAMP -HAND VISE HAND TOOL - UNIVERSAL PART HOLDER 2 Diameter 60 Holes WITH PLASTIC KNOB Peg Clamp is a Universal Work Holder has four movable pegs that accommodate and hold various parts in different shapes and forms, large and small items during design and repair. A h and held tool work holder with 8 pins to hold item in position for Engraving, Carving, Setting and Repair.The Clamp Work surface has multiple positioning segment with holes that the 4-Pins can be positioned to hold part. The
More

Nylon Single Ended Ring Clamp...

$8.98
eBay Nylon Single Ended Ring Clamp Holder 6 Leather Lined Grasp Jaws Jewelry Tool
No Shipping Info
/nylon-single-ended-ring/WKEdudHEgw3T29ST_DfFRA==/info
eBay
IN_STOCK ( In stock )
NYLON SINGLE ENDED RING CLAMP HOLDER 6 LEATHER LINED GRASP JAWS JEWELRY TOOL Nylon ring holding clamp features leather lined jaws for holding rings and other objects securely while polishing, mounting, filing, etc. It has a fly nut at the side for opening and closing of jaws. Strong hinges for extra power. Ring Holding Vice Material: Nylon Overall Length: 4-1/2 Leather-Lined Jaws Shipping Return Policy We take great care packaging every item to ensure safe shipment to you. Once your order has
More

Nonin Sens PMC Adjustable...

$178.67
Claflin Medical Equipment & Supplies Nonin Sens PMC Adjustable Mounting Clamp-2
Free Shipping
/nonin-sens-pmc-adjustable/15vCByEt6D-_UAnwF3otLA==/info
Claflin Medical Equipment & Supplies
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Nonin Sens PMC Adjustable Mounting Clamp-2 allows for mounting of the Respsense or Lifesense to hospital rails, 10 ? 30 mm diameter poles (asbeds, IV-poles and transport vehicles) and table edges.
More

Jewelry Making Tools Kit...

$26.99
eBay Jewelry Making Tools Kit Basic Supply Bench Pin - Sawframe + Blades - Ring Clamp
+ $6.50 shipping
/jewelry-making-tools-kit/02eVlYs-NlhBHPqLzQlBvg==/info
eBay
IN_STOCK ( In stock )
JEWELRY MAKING TOOLS KIT BASIC TOOLS in Jewelry Making and a Supply of Saw Blades BENCH PIN - SAW FRAME - BLADES - RING CLAMP .K it is for anyone interested in Jewelry making. The Kit contains the basics for Jewelry Making and Repair work. The essentials that are needed to start many projects. A very well assembled Tool Kit, which includes Quality Tools at a very GOOD VALUE . Kit and included a Bench Pin with Clamp Saw Frame , adjustable 80 mm German Style with contoured wood black handle, a Je
More

Inside Ring Clamp Holder...

$8.94
eBay Inside Ring Clamp Holder 5-3/4 Wooden Vise Holding Rings Jewelry Making Tool.
Free Shipping
/inside-ring-clamp-holder/TzERMk7DCeGXnDkDNkB01Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
INSIDE RING CLAMP HOLDER 5-3/4 WOODEN VISE HOLDING RINGS JEWELRY MAKING TOOL Expands as the wing nut is turned to grasp rings from the inside. Length: 5-3/4.This ring clamp enables you to hold rings internally in order to work on the outer face of the ring easily. Unwind the wing nut anti-clockwise to loosen the centre metal taper; mount the ring on the opposing end. To secure, turn the wing nut clockwise and the taper will tighten. This expands the four wooden jaws putting pressure insid
More

Side Clamp Bench

$344.95
SCHOOLSin Side Clamp Bench
No Shipping Info
/side-clamp-bench/hEVQR7SK7iFH5cdl-muTxQ==/info
SCHOOLSin
IN_STOCK ( In stock )
Store not rated
Shain's Side Clamp Bench accepts bar clamps and provides an area for both gluing projects and clamp storage. The top is completely open and includes 17 sets of 3/4 wide grooves which accept bar clamps three feet and over. Each groove is cut into heavy-gauge steel rail. The lower center rail is adaptable for storage of hand screws and C clamps. The base is made of solid maple and finished with an earth-friendly water base finish. Can also be ordered with a drip pan. Shain's Side Clamp Bench is made in the USA and comes backed by a limited lifetime warranty. Key Features Solid maple base Includes 17 sets of clamp grooves Earth-friendly, water-based finish protects the workbench Made in the USA Backed by a limited lifetime warranty Specifications Material: Solid maple... Less
More

Adjustable Clamp 1430 Style...

$4.99
homelectrical Adjustable Clamp 1430 Style No. 1400 C-Clamp, 3-in Max Opening
No Shipping Info
/adjustable-clamp-1430/V2pUD4UwkgWFysxd5E3Dzw==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This powerful clamp is extremely effective for holding pieces of wood or metal still while you work. Ensure that mistakes don't occur and your work is steady with this powerful clamp. This clamp is made of cast iron which can easily withstand daily use as well as featuring an 800lb load capacity. . Opening Size: 0 in [Min], 3 in [Max]. Throat Depth: 2 in. Load Cap.: 800 lb. Body Material:Cast Iron. Finish: Bright Plated. Locking Type: Thread Locking. Handle Type: Sliding Pin. Handle Materials: Steel. (Adjustable Clamp 1430)
More

Studio Designs Metal...

$11.98
Quill.com Studio Designs Metal Adjustable Arm Clamp
+ $4.99 shipping
/studio-designs-metal/Div9m1BASfd0za0_Kjk9EQ==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Product Type: Interior Lamps. Name: Lamp Bases & Clamps
More

Bench Vise Clamp On Mount...

$27.99
eBay Bench Vise Clamp On Mount Ball Swivel Jeweler Jewelry Hobby Table Mounting Tool
Free Shipping
/bench-vise-clamp-on-mount/OxvyaNHyjng_rJzLO8NNIQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
360 ROTATING CLAMP ON BENCH VISE Brand New and Unopened in the manufacturer's original box.This 360 degree swivel hobby vise lets you work comfortably at any angle! Great clamp for small hand work.Clamp it to desk or work surface 2 inches or less thick. The ball and socket base with lock-down adjustment saves you time.Solid cast aluminum construction with soft rubber grip covered jaws opens to over 2 to securely hold round, flat and odd-shaped work.Jaws are roughly 3 wide. 100% Feedback Selle
More

Jewelers Wooden Ring Clamp...

$10.48
eBay Jewelers Wooden Ring Clamp Vise With Fly Nut For Stone Setting Polishing Jewelry
Free Shipping
/jewelers-wooden-ring/VKyk-f2losQfyt4UIQAagA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Hard to Find Items at Great Prices 6 Wooden Ring Clamp For Ring Jewelry Repair This is a new wood ring clamp vice with a fly nut Well made wooden and metal clamp makes working on rings easier Simply place your ring in the end and tighten the fly nut to the necessary grip that securely holds the object Leather inserts are placed inside each jaw to safely protect the objects being grasped in the clamp Measurements: 6 in length, 1 1/2 width If you wish to make your purchase with a credit card,
More

Adjustable Frame Clamp

$24.75
Sears Marketplace Adjustable Frame Clamp
No Shipping Info
/adjustable-frame-clamp/aY6C3Vlyks0rSfF0Xv_GIg==/info
Sears Marketplace
IN_STOCK ( In stock )
This popular clamp can handle frames from 5 X 7 to 26 X 30 . If you have bigger frames, it can be extended with a common bar clamp. Features durable aluminum construction and self-squaring clamp pads, and comes complete with fully illustrated instructions.
More

1-7/8 Hobby Vise Durable...

$18.98
eBay 1-7/8 Hobby Vise Durable Aluminum Table Clamp Forcrafts Jewelry
Free Shipping
/178-hobby-vise-durable/2gtlR1ZBhdq-gGfiW4M3Lg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1-7/8Hobby Vise Durable Aluminum Table Clamp For Hobby Crafts and Jewelry Description Features: For holding small, flat, or round objects- Ideal for delicate work, hobbies, art and craft projects Durable Mini Aluminum Alloy Steel Construction. Vise Clamps to the edge of your work table or bench Jaw Capacity: 1-7/8” - Clamps To any Surface up to 1 Thick Payment We only accept payments to be made through PayPal, in order to reduce the time to efficiently process and ship merchandise. Most ord
More

Mini Table Vise Aluminum...

$8.88
eBay Mini Table Vise Aluminum Alloy Craft , hobby, Jewelry Clamp On Vise
Free Shipping
/mini-table-vise-aluminum/D748M5THw7C1sD2HfqL17w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are buying a mini table vise. Jaws are 1-1/2 wide. Opens up to 1-5/16. Can clamp on to a surface up to 3/4. Great for those small items, crafts, hobby, jewelry and ect. Take it anywhere you go.
More

Bench Vise Table Clamp 2...

$12.00
eBay Bench Vise Table Clamp 2 Smooth Jaws Rotating Base Hobby Craft Jewelry
+ $12.65 shipping
/bench-vise-table-clamp-2/2_XGTRlgye-oa4MCpbbknw==/info
eBay
IN_STOCK ( In stock )
Bench Vise 2 Jaws This is a MINI TABLE VICE - Jaw Width is 2 for holding small flat or round objects clamps to the edge of your work bench or table (up to table thickness of approx. (1 1/2 Thick) excellent for the hobbyist 5x5overall measurement of item Maximum Jaw Opening up to 1 5/8 Item # 40-067 International Buyers, please include your phone numbers for shipping!! We guarantee items to be free from defects in material workmanship. If you're not satisfied with any purchase from us, con
More

1-1/2 Mini Hobby Vise Durable...

$12.98
eBay 1-1/2 Mini Hobby Vise Durable Aluminum Table Clamp Forcrafts Jewelry
Free Shipping
/112-mini-hobby-vise/03wv0OGblJZRow90f52ADw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1-1/2 Mini Hobby Vise Durable Aluminum Table Clamp For Hobby Crafts and Jewelry Description Features: For holding small, flat, or round objects- Ideal for delicate work, hobbies, art and craft projects Durable Mini Aluminum Alloy Steel Construction. Vise Clamps to the edge of your work table or bench Jaw Capacity: 1-1/2” Payment We only accept payments to be made through PayPal, in order to reduce the time to efficiently process and ship merchandise. Most orders will be processed and shipped
More

Universal Table Bench Vise...

$18.90
eBay Universal Table Bench Vise Aluminum Craft Hobby Jewelry Clamp On Vise
+ $5.05 shipping
/universal-table-bench/MQMse35fRti19M1p-LH63A==/info
eBay
IN_STOCK ( In stock )
• Allows full rotation plus 90-degree tilt; lock in place at any angle • 3 jaw-width with non-marking rubber grip-pads • Smooth turning zinc-plated steel screw • Rugged yet lightweight die-cast aluminum construction with baked enamel finish • Clamps instantly to table or bench to 2-thickness, non-slip pad • Maximum jaw opening 2Black Color Our Store Policies Payment: We accept all payment through PAYPAL Shipping: We ship all orders on Monday-Fri and the shipment usually process i
More

Helping Hand Magnifier 4x...

$7.28
eBay Helping Hand Magnifier 4x With 2 Alligator Clamps 3rd Hand - Jewelry-hobby-wat ch
+ $5.30 shipping
/helping-hand-magnifier-4x/xZk2U2cO49vOeI8Xz0oP3A==/info
eBay
IN_STOCK ( In stock )
HELPING HAND MAGNIFIER 4X with 2 ALLIGATOR CLAMPS 3rd HAND - JEWELRY-HOBBY-WATC H The two adjustable arms with alligator clips can be adjusted to any position to hold small items. The 2-1/2 dia. magnifying lens is 4X power. Cast iron base. Ideal for soldering and working with small parts and pieces .- Magnification: 4x .- Lens Diameter: 2-1/2”.- Two Adjustable Alligator Clips .- Magnifier, Clips, Joints All Rotate 360°.- Chrome Plated .- Heavy Duty Base with Recessed Round Dish to Hold a Spo
More

Deluxe Clamp On Tub Rail...

$34.90
All Time Medical Deluxe Clamp On Tub Rail 12036 (With Adjustable Height (white with black hand grip))
Free Shipping
/deluxe-clamp-on-tub-rail/6kpwO_fWqG0Vl5m-JhHHtQ==/info
All Time Medical
IN_STOCK ( In stock )
Store not rated
Free Shipping
** With Adjustable Height (white with black hand grip) **The Drive Medical Deluxe Clamp On Tub Rail is available with or without adjustable height. The construction is durable and easy to clean. It features a stainless steel locking mechanism.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342