Itw Brands Teks Lathe Screws Home and Garden - Shopping.com
Showing results for "itw brands teks lathe screws"
Results 1 - 40 of 1094

ITW Teks 21520 Screw Lathe...

$5.70
Essential Hardware ITW Teks 21520 Screw Lathe Drill Point 8 x 1/2
+ $8.88 shipping
/itw-teks-21520-screw/425bTOCI-IBH_OK68usQXA==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
This 8 x 1/2 screw allows for efficient material removalNo pre-drilling, screws tap their own threads, secure fastening and striping holding powerApplications : Attaching metal lathe to steel studs for stucco/plaster applica
More

ITW Teks 21532 Screw Lathe...

$5.70
Essential Hardware ITW Teks 21532 Screw Lathe Drill Point 8 x 1-1/4
+ $8.88 shipping
/itw-teks-21532-screw/q3AePJ5cexjoCDJ90ZkAdQ==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
This 8 x 1 1/4 screw allows for efficient material removalNo pre-drilling, screws tap their own threads, secure fastening and striping holding powerApplications : Attaching metal lathe to steel studs for stucco/plaster appli
More

ITW Teks 21528 Screw Lathe...

$5.70
Essential Hardware ITW Teks 21528 Screw Lathe Drill Point 8 x 1
+ $8.88 shipping
/itw-teks-21528-screw/m8oNEkgWCEpjwgA6kn0aig==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
This lathe drill allows for efficient material removalIt has applications that attach metal lathe to steel stud for stucco/plaster and attaching pre-drilled metal bracket to woodThe applications require a wide and low-profile
More

Itw Global Brands 2020-A RV...

$13.26
Walmart.com Itw Global Brands 2020-A RV Gauge, Dual Head, 10-160 PSI
+ $8.23 shipping
/itw-global-brands-2020a/-G8dKtgQQrazV63rmUVh-g==/info
Walmart.com
IN_STOCK ( In stock )
10-160 PSI, Dual Head Gauge, With Hose & Dial.
More

SHOP FOX Lathe - 10 Inch x 20...

$1,729.99
Northern Tool SHOP FOX Lathe - 10 Inch x 20 Inch, Model M1016
Free Shipping
/shop-fox-lathe-10-inch/t2hqoyQPrH-38VTNVGRvTw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Lathe M1016 is an excellent small-sized lathe with an impressive 9 3/4in. swing and 21in. distance between centers. Includes handy accessories like 5in. 3-jaw chuck, eye shield and 4-way turret tool post. Cannot ship to AK, CA, HI, MA, MD and RI. Stand Included No, Dimensions L x W x H in. 23 x 44 x 17 1/2, HP 3/4, Volts 110, Thread Cutting in. 8 TPI-40 TPI in 12 steps, Width Between Centers in. 21, Speed RPM 150-2,400, Thread Cutting mm 12 at 0.4-3.0. 5in., 3-jaw chuck Cross slide table 11 change gears 2 dead centers 4-way turret tool post Eye shield Forward/reverse switch with emergency stop Swing 9 3/4in. Swing over cross slide 6in. Spindle bore 3/4in. Spindle taper MT #3 Tailstock taper MT #2 Tailstock barrel travel 1/2in. Cross slide travel 4 1/4in. Compound travel 2... Less
More

SHOP FOX Bench Lathe - 10...

$2,049.99
Northern Tool SHOP FOX Bench Lathe - 10 Inch x 26 Inch, Model M1099
Free Shipping
/shop-fox-bench-lathe-10/InmPgeqUUqMFlHi1-AHnlw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This SHOP FOX Bench Lathe makes changing the thread selections quick and easy. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This 6-speed lathe also has extended length hardened and ground precision bedways, 1in. spindle bore, a selection of chucks, face plate and other accessories. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 22 1/2, Dimensions L x W x H in. 50 x 32 x 16 5/8, HP 1, Volts 110 single phase, Width Between Centers in. 26, Spindle Speeds qty. 6, Stand Included No, Thread Cutting in. 33 at 8-72 TPI, Thread Cutting mm 26 at 0.25-3.5, Speed RPM 1,725. 5in. 3-jaw chuck with two sets of jaws 6 1/2in. 4-jaw chuck with... Less
More

SHOP FOX Mini Lathe - 6 Inch...

$739.99
Northern Tool SHOP FOX Mini Lathe - 6 Inch x 10., Model M1015
Free Shipping
/shop-fox-mini-lathe-6/qLmrg6sv7nCrLCIcZuTKNw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. The M1015 gives model makers, toolmakers, gun hobbyists and weekend machinists a way to economically produce small precision parts, threaded parts, fittings, and dies. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Center Height in. 10, HP 1/5, Volts 110, Stand Included No, Speed RPM 100- 2000. 3in. chuck with internal and external jaws Swing over bed 6in. Distance between centers 10in. Cross slide travel 2 3/8in. Spindle bore 3/8in. Spindle taper MT #2 Tailstock taper MT #1 Model Number: M1015. Size: 10. Age Group: Adult.
More

ITW Brands 786 Fastening Pin...

$7.84
Essential Hardware ITW Brands 786 Fastening Pin 2-1/2
+ $8.88 shipping
/itw-brands-786-fastening/CND9z50fUmSaYmYFJ5kC3A==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

ITW Brands 780 Fastening Pin 2

$7.40
Essential Hardware ITW Brands 780 Fastening Pin 2
+ $8.88 shipping
/itw-brands-780-fastening/CYgi5jlOvMMhBY9tRx9R6w==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
This 2-inch fastening pin is designed for use in concrete and structural steel applicationsThe ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityThis
More

ITW Brands 794 Fastening Pin 3

$9.46
Essential Hardware ITW Brands 794 Fastening Pin 3
+ $9.31 shipping
/itw-brands-794-fastening/CClBEkzXzb7ZgFS50qX32A==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

ITW Brands 759 Fastening Pin 1

$4.87
Essential Hardware ITW Brands 759 Fastening Pin 1
+ $4.95 shipping
/itw-brands-759-fastening/cNYnqB9Ys9BSRhQIIpYO7Q==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

Nicholson 10 Fine Cut Long...

$16.29
MidwayUSA Nicholson 10 Fine Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-fine-cut/IQk0bTBJRtFjxMyvLkfATg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.185 thick, 0.935 wide File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Files &... Less
More

ITW Brands 787 Fastening Pin...

$4.66
Essential Hardware ITW Brands 787 Fastening Pin 2-1/2
+ $4.95 shipping
/itw-brands-787-fastening/0yQtu4xZH08SAjyNByWL7g==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti, Remington tools, ITW model No.00022, 40088, 08896 and 16941 tools25 per pack
More

ITW Brands 7887 Pin With...

$4.80
Essential Hardware ITW Brands 7887 Pin With Washer 3
+ $4.95 shipping
/itw-brands-7887-pin-with/6BVBXMl48B8s0JFfjov-7g==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in Model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti, Remington tools and ITW Model No.00022 (SKU 300533), 40088 (SKU 300560), 08896 and 16941 (SKU 300597)Packaged in reusable plastic storage box25 per box
More

ITW Brands 804 Pin With...

$4.80
Essential Hardware ITW Brands 804 Pin With Washer 1-1/2
+ $4.95 shipping
/itw-brands-804-pin-with/6DPN1Dh2ji-IvS4lKa3lGw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in Model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti, Remington tools and ITW Model No.00022 (SKU 300533), 40088 (SKU 300560), 08896 and 16941 (SKU 300597)Packaged in reusable plastic storage box25 per box
More

ITW Brands 774 Fastening Pin...

$5.94
Essential Hardware ITW Brands 774 Fastening Pin 1-1/2
+ $4.95 shipping
/itw-brands-774-fastening/FEiXGo50FZKkFcS9pjvoVw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

ITW Brands 810 Pin With...

$5.81
Essential Hardware ITW Brands 810 Pin With Washer 2-1/2
+ $4.95 shipping
/itw-brands-810-pin-with/LJar1QFnPmIq-6Jid6VUEg==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in Model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti, Remington tools and ITW Model No.00022 (SKU 300533), 40088 (SKU 300560), 08896 and 16941 (SKU 300597)Packaged in reusable plastic storage box25 per box
More

Itw Global Brands 2016-A...

$4.99
Walmart.com Itw Global Brands 2016-A Dual-Head Tire Gauge
+ $8.23 shipping
/itw-global-brands-2016a/NmrkhEYVmXRWK9GY936dUA==/info
Walmart.com
IN_STOCK ( In stock )
Maintaining proper tire pressure reduces fuel consumption and maximizes tire life. Just check tire pressure monthly with the Slime 10-120psi Dual Head Pencil Gauge and air up low tires. It carries the Slime Satisfaction Guarantee.
More

ITW Brands 747 Fastening Pin...

$3.82
Essential Hardware ITW Brands 747 Fastening Pin 3/4
+ $4.95 shipping
/itw-brands-747-fastening/cPxCa3bxknjV7YQoOTTAeg==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

ITW Brands 797 Fastening Pin...

$9.62
Essential Hardware ITW Brands 797 Fastening Pin With Washer 1 White
+ $9.02 shipping
/itw-brands-797-fastening/rcKrgBJoClUYCLQ9MCsUDQ==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per box
More

ITW Brands 803 Fastening Pin...

$9.61
Essential Hardware ITW Brands 803 Fastening Pin With Washer 1-1/2 White
+ $9.36 shipping
/itw-brands-803-fastening/uEtTzCLb0Z_KxcRdTvvtaA==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per box
More

JET 719203 Wood Lathe Bed...

$106.99
CPO Outlets JET 719203 Wood Lathe Bed Extension Stand
Free Shipping
/jet-719203-wood-lathe-bed/9_DS3f97-2iG-ycOdG7YHA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JWL-1221VS Wood Lathe Bed Extension Stand - 719203. Lathe Sold Seperately. Support the extension that gives the JET 1221VS lathe a full 43 in. of turning capacity
More

ITW Brands 809 Fastening Pin...

$11.74
Essential Hardware ITW Brands 809 Fastening Pin With Washer 2-1/2 White
+ $9.31 shipping
/itw-brands-809-fastening/z1D94KdxvV-zYhHNqCEDvw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per box
More

PTG Lathe Centering Bar 1 x 8

$94.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Barrel Vises, Action Wrenches & Receiver Tools
More

Nicholson 10 Bastard Cut Long...

$15.99
MidwayUSA Nicholson 10 Bastard Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-bastard-cut/OewP2xBnhPs8eABCqXqisA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.2 thick, 0.935 wide tapering to 0.71 File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut Searches for products like these typically include: Gunsmithing Supplies,... Less
More

Lathe Back Gear - 10-241X

$269.73
Sears Parts Direct Lathe Back Gear - 10-241X
+ $9.99 shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

SHOP FOX Bench Lathe - 9 Inch...

$1,479.99
Northern Tool SHOP FOX Bench Lathe - 9 Inch x 19 Inch, Model M1049
Free Shipping
/shop-fox-bench-lathe-9/-Kl6_b-5GhIVatler5R7ag==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Bench Lathe has all the features and precision of the larger lathes, but at a fraction of the cost. Check out all the features and you'll agree it's got everything you need 4in. 3-jaw chuck with two sets of jaws, 7 1/4in. 4-jaw chuck with reversible jaws, steady rest, follow rest, MT #2 and MT #3 dead center, MT #2 live center, 4-way tool post, extra C-type tool post and more Includes toolbox and tool kit. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 16, Spindle Speeds qty. 6, Stand Included No, Volts 110 single phase, Thread Cutting in. 8-56 TPI, Thread Cutting mm 0.05-3.0, HP 3/4, Width Between Centers in. 19, Speed RPM 1,725, Dimensions L x W x H in. 22 x 36 1/2 x 15. Swing over bed 9in. Swing over cross slide 5in. Distance between centers 19in. Spindle... Less
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Itw Brands 24200 Tapcon 3/16...

$5.80
Walmart.com Itw Brands 24200 Tapcon 3/16 x 1-1/4-Inch Hex-Washer-Head Concrete Anchors, 25-Pack
+ $8.23 shipping
/itw-brands-24200-tapcon/bjOCpe83xUPCkP3C7ixpGg==/info
Walmart.com
IN_STOCK ( In stock )
Tapcon, 25 Pack, 3/16 x 1-1/4 Hex Washer Head Concrete Anchors.
More

ITW Brands 7886 Fastening Pin...

$11.93
Essential Hardware ITW Brands 7886 Fastening Pin With Washer 3
+ $9.36 shipping
/itw-brands-7886-fastening/J69C2GuV-nPoi2W74jIPnw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in model No.RS22, 721, Autofast, D60, SA270, HD22, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per box
More

ITW Brands 16941...

$260.44
Essential Hardware ITW Brands 16941 Semi-Automatic Light Weight Tool
Free Shipping
/itw-brands-16941/UalWeS6xNOMRrb8-k_6Dzw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
Free Shipping
This tool is designed for professionals and semi- professionalsSemi -automatic 0.27 caliber tool uses 0.27 caliber 10-shot strip loads 3 (green), 4 (yellow) and 5 (red)Pin capacity: 2 1/2-inch (3-inch with washer)Padded recoil absorbing handle for greater comfortFastens up to 3-inch standard ramset drive pins and threaded studs, ideal for general construction applicationsWeigh t: 4 1/2 lb
More

ITW BRANDS Tapcon 1/4 x...

$8.86
Walmart.com ITW BRANDS Tapcon 1/4 x 2-3/4-Inch Phillips Flat-Head Concrete Anchors, 25-Pack
+ $3.54 shipping
/itw-brands-tapcon-14-x/8XybMdv5fvEkorpaz6h4rw==/info
Walmart.com
IN_STOCK ( In stock )
Tapcon, 25 Pack, 1/4 x 2-3/4 Phillips Flat Head Concrete Screw.
More

ITW Brands 6171 Fastening Pin...

$6.76
Essential Hardware ITW Brands 6171 Fastening Pin Knurled 1/2
+ $4.95 shipping
/itw-brands-6171-fastening/y6qtbpV9Fq8RTEFl-EyXgA==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
These 0.300 head diameter drive pins are designed for use in concrete and structural steel applicationsITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durabilityFor use in low-velocity toolsFor use in tool model No.HD22, RS22, 721, Autofast, D60, SA270, D45/D45A, Cobra, M70, Hilti and Remington toolsPackaged in reusable plastic storage box100 per pack
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410