Category

Tools and Accessories
Showing results for "intel x25m 160gb"
Results 1 - 40 of 1500+

Intel 100GB SSD710 Sata 3GBPS...

$378.00
ALLHDD Intel 100GB SSD710 Sata 3GBPS 2.5 Inch Internal Solid State Drive. New
Free Shipping
/intel-100gb-ssd710-sata/92i5aaSs4XVemuhxzNvPKw==/info
ALLHDD
IN_STOCK ( In stock )
Free Shipping
Intel 100GB SSD710 Sata 3GBPS 2.5 Inch Internal Solid State Drive. New Retail Factory Sealed With Full Manufacturer Warranty.
More

Speedaire Air Cylinder (25mm...

$99.00
Grainger Speedaire Air Cylinder (25mm Bore) 160mm Stroke. Model: 5TLH5
+ $9.63 shipping
/speedaire-air-cylinder/SgDHQCPaDd5B-egr-wvuoQ==/info
Grainger
IN_STOCK ( In stock )
Air Cylinder, Double Acting, Iso Round, Bore Dia. 25mm, 160mm Stroke, Nose Mount, 1/8 In. G Port Size, 145 Psi Max. Pressure, Cushion Type Rubber Bumper, 14 Degrees To 140 Degrees F Temp. Range, 275mm Overall Length, Magnetic Piston Material, Stainless Steel Body Material, Hard Coat Anodized Finish, Aluminum End Cap Material, Chrome Plated Carbon Steel Piston Rod Material, Magnetic Piston Yes, Tie Rod Material N, Tube Material Stainless Steel, Nose Mount Thread M22 X 1.5 In., 10mm Rod Dia.
More

Pressure Gauge (0 To 160 Psi)...

$70.45
Grainger Pressure Gauge (0 To 160 Psi) 2-1/2in. Model: P2598LZ06SS-M
+ $9.63 shipping
/pressure-gauge-0-to-160/HVrHy-zH_TKINLM9uYcyJA==/info
Grainger
IN_STOCK ( In stock )
Pressure Gauge, Max. Reading, 2-1/2 In., 0 To 160 Psi, Connection Size 1/4 In. Npt, Connection Location Lower, Smallest Graduation 5 Psi/20 Kpa, Graduations 20 Psi/200 Kpa, Accuracy +/-1.6 Percent, Case Material Stainless Steel, Case Color Silver, Socket Material 316 Stainless Steel, Tube Material 316 Stainless Steel, Lens Material Acrylic, Ring Material Twist On Stainless Steel, Operating Temp. Range 0 Degrees To 140 Degrees F, Characteristics Max Reading Pointer, Series P2598lz-m
More

Sandvik Coromant Rotating...

$72.10
Grainger Sandvik Coromant Rotating Holder (393.14-25160). Model: 393.14-25 160
+ $9.63 shipping
/sandvik-coromant-rotating/qmyCCmE7MmT8Eby_uhAI2g==/info
Grainger
IN_STOCK ( In stock )
Rotating Holder, 39314-25160, Mount Collet Er/din6499-b -design Er 25, For Use With Cylindrical Clamping (er 16-50) -metric 160 - 150, Dimension A 15 In, Dimension B 063 In, Dimension D 16 In, Capacity Min 0591 In, Capacity Max 160 - 150 In
More

Grainger Approved O-ring...

$27.50
Grainger Grainger Approved O-ring (dash 160) buna N, 0.1 Inch, [PK/25]. Model: 2KAY2
+ $9.63 shipping
/grainger-approved-oring/SKoK_qraft5eM5fhNyWoBA==/info
Grainger
IN_STOCK ( In stock )
O-ring, Buna N, As568 Dash Number 160, Actual Width 0.103 In., Actual Inside Dia. 5.237 In., Outside Dia. 5.443 In., Cross Section Shape Round, Durometer Rating Medium Hard, Durometer 90 Shore A, Nominal Width 3/32 In., Nominal Inside Dia. 5-1/4 In., Nominal Outside Dia. 5-7/16 In., Color Black, Temp. Range -25 Degrees To 250 Degrees F, Meets/exceeds Sae J200, Astm D2000, Package Quantity 25
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266ll- 16un01a160m 1125). Model: 266LL- 16UN01A160M 1125
+ $9.63 shipping
/sandvik-coromant/8IahRf0MSLWHJqrSVMlVUg==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266ll, Ansi Number 266ll- 16un01a160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Left Hand, Insert Type Internal Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$52.00
Grainger Sandvik Coromant Threading Insert (266rl- 16un02a160m 1125). Model: 266RL- 16UN02A160M 1125
+ $9.63 shipping
/sandvik-coromant/rqJbnr7HJwlDVq88Vv_2ww==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Lay-down With Center Screw, Ansi Number 266rl- 16un02a160m 1125, Thread Profile Un 60 Deg., Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Corothread 266 Insert, Workpiece Material All, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Tialn - Chromium Oxide, Iso Number 266rl- 16un02a160m 1125, Inscribed Circle 3/8 In, For Use With Inserts Threading, U-lock And Twin-lock / For Internal Threading, T-max U-lock
More

Knipex Solid Joint Pliers...

$48.10
Grainger Knipex Solid Joint Pliers (6-1/4 Inch Oal). Model: 25 21 160
+ $9.63 shipping
/knipex-solid-joint-pliers/aOm9vCzWxJrpEE3B_k1k-w==/info
Grainger
IN_STOCK ( In stock )
Solid Joint Pliers, Overall Length 6-1/4 In., Jaw Length 3/32 In., Jaw Width 3/8 In., Tip Width 3/32 In., Handle Type Dipped, Handle Color Red, Material High Carbon Tool Steel, Cutting Edge Induction Hardened, Cutting Capacity/material 7/64 In. Med Hard, 1/16 In. Hard, Spring Return No, Voltage Rating None, Standards Din Iso 5745
More

3m Sanding Belt (1/2 Inch...

$3.22
Grainger 3m Sanding Belt (1/2 Inch Wx24 Inch L) ao, 160gr. Model: 61500190287
+ $9.63 shipping
/3m-sanding-belt-12-inch/ikSV1cq7ANksi1R8Do4ADw==/info
Grainger
IN_STOCK ( In stock )
Sanding Belt, Width 1/2 In., Length 24 In., Abrasive Type Closed Coat, Resin Bonded, Abrasive Material Aluminum Oxide, Grit 160, Grade Very Fine, Series 337dc, Backing Material Cloth, Backing Weight X, Color Gray
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rl- 16un01a160m 1135). Model: 266RL- 16UN01A160M 1135
+ $9.63 shipping
/sandvik-coromant/0XqD9VX2H-pBdo9AABmZog==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rl, Ansi Number 266rl- 16un01a160m 1135, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Internal Lay Down, Chip-breaker All-round Geometry, Grade 1135, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rg- 16un01c160m 1125). Model: 266RG- 16UN01C160M 1125
+ $9.63 shipping
/sandvik-coromant/6e83XN_fb6O-8LjjjS8KRQ==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rg, Ansi Number 266rg- 16un01c160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Right Hand, Insert Type External Lay Down, Chip-breaker Chip Control, High Security, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rl- 16wh01a160m 1125). Model: 266RL- 16WH01A160M 1125
+ $9.63 shipping
/sandvik-coromant/AbcTj7GkBJNfyYVituDnkg==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rl, Ansi Number 266rl- 16wh01a160m 1125, Thread Profile Whitworth 55 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Internal Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$55.25
Grainger Sandvik Coromant Threading Insert (266rg- 16un02a160m 1125). Model: 266RG- 16UN02A160M 1125
+ $9.63 shipping
/sandvik-coromant/KyLfGRf7ox-3bZzMszDl4Q==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rg, Ansi Number 266rg- 16un02a160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Right Hand, Insert Type External Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266lg- 16un01a160m 1125). Model: 266LG- 16UN01A160M 1125
+ $9.63 shipping
/sandvik-coromant/MZS_LaofJoXhETQZk2agng==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266lg, Ansi Number 266lg- 16un01a160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Left Hand, Insert Type External Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$34.35
Grainger Sandvik Coromant Threading Insert (266rg- 16un01a160m 1125). Model: 266RG- 16UN01A160M 1125
+ $9.63 shipping
/sandvik-coromant/gryePBWopqeKPeqq0QDz1g==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rg, Ansi Number 266rg- 16un01a160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Right Hand, Insert Type External Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$36.70
Grainger Sandvik Coromant Threading Insert (266rl- 16un01a160m 1125). Model: 266RL- 16UN01A160M 1125
+ $9.63 shipping
/sandvik-coromant/py5danj6UGu7izeMcgBCdg==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rl, Ansi Number 266rl- 16un01a160m 1125, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Internal Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rl- 16un01c160m 1135). Model: 266RL- 16UN01C160M 1135
+ $9.63 shipping
/sandvik-coromant/sSV12B-n2VyF07m4C4HoGw==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rl, Ansi Number 266rl- 16un01c160m 1135, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Internal Lay Down, Chip-breaker Chip Control, High Security, Grade 1135, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rg- 16wh01a160m 1125). Model: 266RG- 16WH01A160M 1125
+ $9.63 shipping
/sandvik-coromant/s_MghQK2bbIVFrZtKU9oEA==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rg, Ansi Number 266rg- 16wh01a160m 1125, Thread Profile Whitworth 55 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Right Hand, Insert Type External Lay Down, Chip-breaker All-round Geometry, Grade 1125, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Sandvik Coromant Threading...

$35.40
Grainger Sandvik Coromant Threading Insert (266rg- 16un01a160m 1135). Model: 266RG- 16UN01A160M 1135
+ $9.63 shipping
/sandvik-coromant/wjpBfNr1AL7xfc32rCG-WA==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style 266rg, Ansi Number 266rg- 16un01a160m 1135, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type External, Cutting Direction Right Hand, Insert Type External Lay Down, Chip-breaker All-round Geometry, Grade 1135, No. Of Edges 3, Insert Size 16, Coating Pvd, Mounting Style Screw Clamp, Rake Negative, Insert Shape Triangular, Mounting Hole Dia. 0.173 In, 0.375 In Inscribed Circle, 0.156 In Insert Thickness
More

Knipex Needle Nose Pliers...

$53.25
Grainger Knipex Needle Nose Pliers (6-1/4 Inch) serrated. Model: 25 08 160 SBA
+ $9.63 shipping
/knipex-needle-nose-pliers/nIesN7bLdKIvFwRMeM4yhA==/info
Grainger
IN_STOCK ( In stock )
Radio Pliers, Insulated, Nose Type Long Half Round, Snipe, Overall Length (in.) 6-1/4, Side Cutter Yes, Cutting Edge Induction Hardened, Cutting Capacity/material 7/64 In. Med Hard, 1/16 In. Hard, Handle Type Insulated, Handle Color Red And Yellow, Construction High Grade Special Tool Steel, Oil Hardened And Tempered, Pointed Half Round Jaws, Serrated Gripping Surfaces, Suitable For Gripping And Cutting, Voltage Rating 1000, Meets/exceeds Iec 60900, Din Ec 60900
More

Knipex Needle Nose Pliers...

$46.80
Grainger Knipex Needle Nose Pliers (6-1/4 Inch) 1-31/32 Inch Model: 25 02 160
+ $9.63 shipping
/knipex-needle-nose-pliers/sSbbTer7KfbTfG2A1HaSqw==/info
Grainger
IN_STOCK ( In stock )
Radio Pliers, Nose Type Long Half Round, Snipe, Overall Length (in) 6-1/4, Jaw Length (in) 1-31/32, Jaw Width (in) 3/8, Tip Width (in) 3/32, Side Cutter Yes, Cutting Edge Induction Hardened, Cutting Capacity/material 7/64 In. Med Hard, 1/16 In. Hard, Handle Type Dual Component Comfort Grip, Handle Color Red/blue, Construction High Grade Special Tool Steel, Oil Hardened And Tempered, Pointed Half Round Jaws, Serrated Gripping Surfaces, Suitable For Gripping And Cutting, Meets/exceeds Din Iso 5745
More

Knipex Needle Nose Pliers...

$63.30
Grainger Knipex Needle Nose Pliers (6-1/4 Inch) 2-1/8 Inch Model: 29 25 160
+ $9.63 shipping
/knipex-needle-nose-pliers/yEZzbqjo33x-G9WcN2UdQQ==/info
Grainger
IN_STOCK ( In stock )
Telephone Pliers, Nose Type Slim, Long, Half Round, Overall Length (in.) 6-1/4, Jaw Length (in.) 2-1/8, Jaw Width (in.) 23/64, Tip Width (in.) 5/64, Side Cutter No, Handle Type Dual Component Comfort Grip, Handle Color Red And Blue, Construction Chrome Vanadium Electric Steel, Oil Hardened And Tempered, Chrome Plated, Extra Slim, Fine Tips, Suitable For Soldering Work, Meets/exceeds Din Iso 5745
More

3m Sanding Belt (1/2 Inch...

$2.89
Grainger 3m Sanding Belt (1/2 Inch Wx12 Inch L) ao, 160gr. Model: 61500193448
+ $9.63 shipping
/3m-sanding-belt-12-inch/vdCJLgMYA3qg9RnN2GoQBA==/info
Grainger
IN_STOCK ( In stock )
Sanding Belt, Width 1/2 In., Length 12 In., Abrasive Type Closed Coat, Resin Bonded, Abrasive Material Aluminum Oxide, Grit 160, Grade Very Fine, Series 337dc, Backing Material Cloth, Backing Weight X, Color Gray
More

Gearbelt (hawk Pd) 160 Teeth,...

$48.55
Grainger Gearbelt (hawk Pd) 160 Teeth, 20mm. Model: 1280 8M 20
+ $9.63 shipping
/gearbelt-hawk-pd-160/Sm-PjBDn-vB-wNYkjm25lA==/info
Grainger
IN_STOCK ( In stock )
Synchronous Drive Gearbelt, Gearbelt Type Hawk Pd, Pitch 8mm, Number Of Teeth 160, Pitch Length 1280mm, Width 20mm, Industry Number 12808m20, Material Compounded Rubber
More

Gearbelt (hawk Pd) 160 Teeth,...

$70.20
Grainger Gearbelt (hawk Pd) 160 Teeth, 30mm. Model: 1280 8M 30
+ $9.63 shipping
/gearbelt-hawk-pd-160/Zwziy50nGV7p2-HyOMO5kA==/info
Grainger
IN_STOCK ( In stock )
Synchronous Drive Gearbelt, Gearbelt Type Hawk Pd, Pitch 8mm, Number Of Teeth 160, Pitch Length 1280mm, Width 30mm, Industry Number 12808m30, Material Compounded Rubber
More

Grainger Approved O-ring...

$16.10
Grainger Grainger Approved O-ring (dash 160) buna N, 0.1 Inch, [PK/25]. Model: 1KLA3
+ $9.63 shipping
/grainger-approved-oring/byNPL_hOauqi0H_uT0moow==/info
Grainger
IN_STOCK ( In stock )
O-ring, Buna N, As568 Dash Number 160, Actual Width 0.103 In., Actual Inside Dia. 5.237 In., Outside Dia. 5.443 In., Cross Section Shape Round, Durometer Rating Medium Hard, Durometer 70 Shore A, Nominal Width 3/32 In., Nominal Inside Dia. 5-1/4 In., Nominal Outside Dia. 5-7/16 In., Color Black, Temp. Range -40 Degrees To 250 Degrees F, Meets/exceeds Sae J200, Astm D2000, Package Quantity 25
More

Pressure Gauge (0 To 160 Psi)...

$17.30
Grainger Pressure Gauge (0 To 160 Psi) 2-1/2in. Model: P2508L06
+ $9.63 shipping
/pressure-gauge-0-to-160/XL4apOalxRtu784VbzculQ==/info
Grainger
IN_STOCK ( In stock )
Pressure Gauge, Test, 2-1/2 In., 0 To 160 Psi, Connection Size 1/4 In. Npt, Connection Location Lower, Smallest Graduation 5 Psi/0.2 Bar, Graduations 40 Psi/2 Psi, Accuracy +/-3-2-3 Percent, Case Material Drawn Steel, Case Color Black, Socket Material Brass, Tube Material Brass, Lens Material Acrylic, Ring Material Black Steel, Operating Temp. Range -40 Degrees To 150 Degrees F, For Use With Pressure Test Kits, Series P2508l
More

Pressure Gauge (0 To 160 Psi)...

$26.15
Grainger Pressure Gauge (0 To 160 Psi) 3-1/2in. Model: P3508L06
+ $9.63 shipping
/pressure-gauge-0-to-160/ux6SF63CpAH2O5_ILNocDw==/info
Grainger
IN_STOCK ( In stock )
Pressure Gauge, Test, 3-1/2 In., 0 To 160 Psi, Connection Size 1/4 In. Npt, Connection Location Lower, Smallest Graduation 5 Psi/0.2 Bar, Graduations 40 Psi/2 Psi, Accuracy +/-3-2-3 Percent, Case Material Drawn Steel, Case Color Black, Socket Material Brass, Tube Material Brass, Lens Material Acrylic, Ring Material Drawn Steel, Operating Temp. Range -40 Degrees To 150 Degrees F, For Use With Pressure Test Kits, Series P3508l
More

Pressure Gauge (0 To 160 Psi)...

$24.84
Grainger Pressure Gauge (0 To 160 Psi) 2in, 1/4in. Model: P20157L06
+ $9.63 shipping
/pressure-gauge-0-to-160/w5JqZ3jEAZ5FyZUOFmuLAA==/info
Grainger
IN_STOCK ( In stock )
Pressure Gauge, Test, 2 In., 0 To 160 Psi, Connection Size 1/4 In. Npt, Connection Location Lower, Smallest Graduation 2 Psi, Graduations 20 Psi, Accuracy +/-2-1-2 Percent, Case Material Steel, Case Color Chrome, Socket Material Brass, Tube Material Phosphor Bronze, Lens Material Polycarbonate, Operating Temp. Range -40 Degrees To 150 Degrees F, Series P20157l
More

Grainger Approved O-ring...

$10.52
Grainger Grainger Approved O-ring (dash 160) viton, 0.1 Inch, [PK/2]. Model: 1BYR5
+ $9.63 shipping
/grainger-approved-oring/1lqXVkOh4NPZCC1VzjzDXQ==/info
Grainger
IN_STOCK ( In stock )
O-ring, Viton, As568 Dash Number 160, Actual Width 0.103 In., Actual Inside Dia. 5.237 In., Outside Dia. 5.443 In., Cross Section Shape Round, Durometer Rating Medium Hard, Durometer 75 Shore A, Nominal Width 3/32 In., Nominal Inside Dia. 5-1/4 In., Nominal Outside Dia. 5-7/16 In., Color Black, Temp. Range -15 Degrees To 400 Degrees F, Meets/exceeds Sae J200, Astm D2000, Package Quantity 2
More

Aro Pressure Gauge (0 To 160...

$29.10
Grainger Aro Pressure Gauge (0 To 160 Psi) 2in, 1/8in. Model: 104500
+ $9.63 shipping
/aro-pressure-gauge-0-to/9wGFLi4df9VGQAuAL1sZrQ==/info
Grainger
IN_STOCK ( In stock )
Pressure Gauge, General Purpose, 2 In., 0 To 160 Psi, Connection Size 1/8 In. Npt, Connection Location Back, Smallest Graduation 5 Psi, Case Material Plastic, Case Color Black, Lens Material Polycarbonate, Operating Temp. Range 0 Degrees To 150 Degrees F, Manufacturers Warranty Length 2 Yr.
More

Sandvik Coromant Threading...

$37.35
Grainger Sandvik Coromant Threading Insert (mb-07th160un-10r 1025). Model: MB-07TH160UN-10R 1025
+ $9.63 shipping
/sandvik-coromant/IW_bkBw2tlKwWg8IQe1XDg==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Small Part Machining, Ansi Number Mb-07th160un-10r 1025, Thread Profile Un 60 Deg., Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Corocut Mb Insert, Workpiece Material All, Grade 1025, No. Of Edges 1, Insert Size 07, Coating Tialn - Tin, Iso Number Mb-07th160un-10r 1025, Inscribed Circle 07, For Use With Corocut Mb
More

Grooving Tool. Model:...

$35.30
Grainger Grooving Tool. Model: RRM-160-30
+ $9.63 shipping
/grooving-tool-model/Mqq7eMueOC45B5Hsq8o6VQ==/info
Grainger
IN_STOCK ( In stock )
Grooving Tool, Style Retaining Ring, Material Micro Grain Carbide, Overall Length 72mm, Shank Dia. 10mm, Bore Dia. 10mm, Groove Width 1.60mm, Max. Cutting Depth 30mm, Offset 2.75mm, Finish Uncoated, Cutting Direction Right Hand, Grade C2, Application Groove Boring
More

Sandvik Coromant Threading...

$37.35
Grainger Sandvik Coromant Threading Insert (mb-07th160ac-11r 1025). Model: MB-07TH160AC-11R 1025
+ $9.63 shipping
/sandvik-coromant/VSFaCUuzhKnR6rTGg0f8Xg==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Small Part Machining, Ansi Number Mb-07th160ac-11r 1025, Thread Profile Acme 29 Deg., Pitch 16 Tpi, Thread Type Internal, Cutting Direction Right Hand, Insert Type Corocut Mb Insert, Workpiece Material All, Grade 1025, No. Of Edges 1, Insert Size 07, Coating Tialn - Tin, Iso Number Mb-07th160ac-11r 1025, Inscribed Circle 07, For Use With Corocut Mb
More

Sandvik Coromant Threading...

$40.35
Grainger Sandvik Coromant Threading Insert (mb-07th160un-10l 1025). Model: MB-07TH160UN-10L 1025
+ $9.63 shipping
/sandvik-coromant/Wy0puSeawzk11LwT2uM3sw==/info
Grainger
IN_STOCK ( In stock )
Carbide Threading Insert, Style Mb-07, Ansi Number Mb-07th160un-10l 1025, Thread Profile Un 60 Degrees , Pitch 16 Tpi, Thread Type Internal, Cutting Direction Left Hand, Insert Type Mb Internal Precision Machining, Chip-breaker Sharp Edge Geometry, Grade 1025, No. Of Edges 1, Insert Size 07, Coating Pvd, Mounting Style Screw Clamp, Rake Positive, Insert Shape Single Edge Screw Clamping, 07t Inscribed Circle
More

Grooving Tool. Model:...

$35.30
Grainger Grooving Tool. Model: RRM-160-10
+ $9.63 shipping
/grooving-tool-model/fALgHgh9Dbs7yyWc3v-MoA==/info
Grainger
IN_STOCK ( In stock )
Grooving Tool, Style Retaining Ring, Material Micro Grain Carbide, Overall Length 72mm, Shank Dia. 10mm, Bore Dia. 10mm, Groove Width 1.60mm, Max. Cutting Depth 10mm, Offset 2.75mm, Finish Uncoated, Cutting Direction Right Hand, Grade C2, Application Groove Boring
More

Milwaukee Rechargeable...

$55.55
Grainger Milwaukee Rechargeable Worklight (red) led, 160 Lm. Model: 49-24-0146
+ $9.63 shipping
/milwaukee-rechargeable/gvix4FanxcsPFKb_bTAFUA==/info
Grainger
IN_STOCK ( In stock )
Rechargeable Worklight, Lamp Type Led, Battery Size 12v, Battery Type Lithium-ion, Number Of Batteries 1, Batteries Included No, Battery Burn Time 2 Hr., Length 7 In., 160 Lumens, Focus Fixed, Body Color Red, Body Material Plastic, Impact Resistance Not Specified, Lens Material Polycarbonate, Light Output 160 Lm, Light Output Modes Single, Safety Rating Not Specified, Water Penetration Rating Not Specified
More

Engraving Tool. Model:...

$12.27
Grainger Engraving Tool. Model: RSC-250-160
+ $9.63 shipping
/engraving-tool-model/hHC09DZvtbnUi7DSux1BZA==/info
Grainger
IN_STOCK ( In stock )
Boring Bar Engraver, Single End, Carbide, Conical Point, Tip Dia. .030 In, Shank Dia. 1/4 In, Angle 60 Deg., Length Of Cut 1/2 In, Split Length 2-1/2 In, Cutting Direction Right Hand, Finish Uncoated
More

Grooving Tool. Model:...

$35.30
Grainger Grooving Tool. Model: RRM-160-40
+ $9.63 shipping
/grooving-tool-model/zI3NfGxN8-yHXj0ThrG0aQ==/info
Grainger
IN_STOCK ( In stock )
Grooving Tool, Style Retaining Ring, Material Micro Grain Carbide, Overall Length 72mm, Shank Dia. 10mm, Bore Dia. 10mm, Groove Width 1.60mm, Max. Cutting Depth 40mm, Offset 2.75mm, Finish Uncoated, Cutting Direction Right Hand, Grade C2, Application Groove Boring
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816