inside dial caliper

The Starrett 120M-300 dial caliper measures 0 to 300 mm with 0.02 mm accuracy. This handy measuring tool allows for reliable and accurate readings with the sharp, black graduations on the no-glare, satin-finished bar, crisp lines on the yellow dial face, and knife edge contacts for inside and outside measurements. One full revolution of the dial is equivalent to 2 mm. The jaw depths on this caliper are approximately 1-1/2” or 38 mm for the outside measuring jaws and 5/8 or 16 mm on the inside measuring jaws. The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated... Less

Dial Caliper, Range 0-8, Graduations 0.001 In, Jaw Depth 1.96 In, Dial Color White, Dial Hand Completes One Revolution Per Each 0.100 Inches, Outside, Inside, Step And Depth Measurements, Accuracy 0.001 In, Hardened Stainless Steel, Microlapped For Accuracy, Meets Us Federal Specifications, Includes Fitted Case

24 PRECISION HEAVY DUTY DIAL CALIPER Heavy Duty jaws Inside, Outside and Depth measurements Round-shaped measuring faces providing accurate inside measurement The upper and lower slider graduate respectively Inside and Outside measurements can be read di

The Brown & Sharpe TESA CCMA dial caliper has an accuracy of 100mm, a 32mm diameter rotating dial with a yellow face and lock screws, is made of stainless steel, and measures in metric. The covered rack helps prevent measurement error by protecting the gear from foreign matter. Linear accuracy meets Deutsches Institut für Normung (DIN) 862 standards. These calipers are for use in taking inside dimensions (ID), outside dimensions (OD), depth, and step measurements. The bezel lock screw locks the dial and the slider lock screw holds the sliding jaw in position. The hardened stainless steel components, including the bar, measuring surfaces, and gears, offer corrosion resistance, increased accuracy, and long life. Spring anti-backlash control offers increased accuracy over standard gear... Less

Dial Caliper, Range 0-12, Graduations 0.001 In, Jaw Depth 2 7/16 In, Dial Color White, Dial Hand Completes One Revolution Per Each 0.100 Inches, Outside, Inside, Step And Depth Measurements, Accuracy 0.001 In, Hardened Stainless Steel, Microlapped For Accuracy, Meets Us Federal Specifications, Includes Fitted Case

The Brown & Sharpe TESA CCMA dial caliper has an accuracy of 100mm, a 32mm diameter rotating dial with a yellow face and lock screws, is made of stainless steel, and measures in metric. The covered rack helps prevent measurement error by protecting the gear from foreign matter. Linear accuracy meets Deutsches Institut für Normung (DIN) 862 standards. These calipers are for use in taking inside dimensions (ID), outside dimensions (OD), depth, and step measurements. The bezel lock screw locks the dial and the slider lock screw holds the sliding jaw in position. The hardened stainless steel components, including the bar, measuring surfaces, and gears, offer corrosion resistance, increased accuracy, and long life. Spring anti-backlash control offers increased accuracy over standard gear... Less

Inside Dial Caliper Gages | Minimum Measurement (mm): 5.00 | Maximum Measurement (mm): 15.00

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial with a pointer that travels one rotation for each 1mm measured to perform precise outside dimension (OD), inside dimension (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in millimeters. The dial can be... Less

The Starrett dial caliper has sharp black graduations every 0.100 on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001. One full revolution of the dial is equivalent to 0.100. These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack,... Less