inline shut off valve

Highland by XS Scuba's Deluxe Inline Shut-Off is an inline valve that can be used for closing off the air flow to your second stage regulator or inflator mechanism for a dry suit. Easy to install on standard hoses placed between the hose and the second stage regulator or between the first stage regulator and power inflator hose for quick and easy shut-off of air or to allow air flow to continue. Highly Visible Red Colored Visual Indicator of closed position and Green Colored Visual Indicator of open position. Just slide the Knurled Slide Collar to Shut-Off or Turn-On Gas Flow. Slide is made from Durable Machined Delrin and the Knurled Texture makes it easy to operate even when wearing gloves. Inline Shut-Off has 9/16-18 UNF Male Inlet to 9/16-18 UNF Female Outlet Threads. Inline Shut-Off... Less

This Parker NP6 series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, threaded bonnet, and double ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 6,000 pounds per square inch gauge (psig) CWP (cold working pressure). The threaded bonnet provides a durable pressure tight seal. The non-rotating PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and... Less

Ideal for vacuum or pressure. Delrin Acetal with Burna-N seals. Single side shut-off models(Check Valve). Will withstand up to 100 psi, 25 mercury vacuum, and operating temperature -45¦F to 180¦. USDA and FDA approved. Sealed with a twist; replaceable O-rings eliminate leaks. Miniature size for low-profile CO2 and Kalkreaktor applications. **Variations of this product can be found in many online stores. The version we carry is of the highest quality.

Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process, power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities ranging from -65 degree F to 450 degree F (-54 degree C to 232 degree C) and pressures 5000 psig (345 bar), V Series Needle Valves provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems. Inline configuration. Flow rate Cv is 0.55. 3/8 Inlet size. Double ferrule compression inlet connection. 3/8 Outlet size. Double ferrule compression outlet connection. Regulating stem type. PTFE (polytetrafluoroe thylene) stem seal. Stainless steel trim. Stainless steel body material. Manual operated. 0.228 Orifice. 100 Percent factory... Less

2 Pcs 1/4 Inline Tap Shut Off Valve For Water FIlter Reverse Osmosis RO System Please visit our store , you will find what you need Description 1/4 Inline Tap Shut Off Valve Features: Can be fitted to any application were 1/4 lldpe water pipe tubing is used 1/4 pushfit on both sides - simply insert pipe 2 options - on and off. when in ON position , the water will flow as normal. When in OFF position , the water is turned off. Important for the quick fitting connector: When use quick fitting

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, needle stem, integral bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +450 degrees F (-54 to +232 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The regulating needle stem type N, made of 316 stainless steel, conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes, and it provides coarse regulation with... Less

Original Aprilaire #4040 replacement solenoid valve. Note: Valve styles may vary. 24 VAC 2.3 Watts Replacement solenoid value for Aprilaire Humidifier models 220, 224, 400, 440, 500, 550, 558, 560, 568, 600, 700, 760, 768. The #4040 soleniod valve includes a new inline strainer (pre-inserted in inlet side of valve), and a compression nut & washer for the inlet side only. Solenoid Valve Replacement Instructions For power units unplug electrical cord. For bypass units turn off power to furnace. Also turn the humidistat off. Shut off water supply at the saddle valve Disconnect inlet and outlet water compression nuts. Double wrench. Note, some water may drip on floor. Remove the orifice (which controls the water flow) from the plastic or copper tube and make sure there is no obstruction... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, needle stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends to connect two male threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +450 degrees F (-54 to +232 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The regulating needle stem type N, made of 316 stainless steel, conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes, and it provides coarse regulation with... Less

Questions? Give us a call 1-866-235 BEER(2337) ext.140 Inline Ball Valve Shut Off - 1/4 Barb Item # SH-566 Use this inline ball valve to shut off the flow in your beer or air line. Simply secure it with screw or tab clamps and you’ll be in control in no time. This particular inline shut off valve is a quarter turn ball valve with no check valve. Features Simple operation with an easy to use handle Allows you to control the flow of air and/or beer Simply choose the shut off that corresponds w

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, needle stem, integral bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +450 degrees F (-54 to +232 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The regulating needle stem type N, made of 316 stainless steel, conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes, and it provides coarse regulation with... Less

This Parker V series inline needle valve has a brass body, nylon 6/6 hand wheel, needle stem, integral bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The brass body offers higher corrosion resistance than steel. Operating temperatures range from -65 to +400 degrees F (-54 to +204 degrees C) at up to 3,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The regulating needle stem type N, made of 316 stainless steel, conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes, and it provides coarse regulation with metal-to-metal shut-off in liquids. The nylon 6/6 hand wheel, used to... Less

This Parker NP6 series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, threaded bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 6,000 pounds per square inch gauge (psig) CWP (cold working pressure). The threaded bonnet provides a durable pressure tight seal. The non-rotating PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse... Less

Questions? Give us a call 1-866-235 BEER(2337) ext.140 Inline Ball Valve Shut Off - 3/8 Barb Item # SH-567 Use this inline ball valve to shut off the flow in your beer or air line. Simply secure it with screw or tab clamps and you’ll be in control in no time. This particular inline shut off valve is a quarter turn ball valve with no check valve. Features Simple operation with an easy to use handle Allows you to control the flow of air and/or beer Simply choose the shut off that corresponds w

Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process, power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities ranging from -65 degree F to 450 degree F (-54 degree C to 232 degree C) and pressures to 5000 psig (345 bar), V Series Needle Valves provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems. Inline configuration. Flow rate Cv is 1.05. 1/2 Inlet size. Single ferrule compression inlet connection. 1/2 Outlet size. Single ferrule compression outlet connection. Regulating stem type. PTFE (polytetrafluoroe thylene) stem seal. Stainless steel trim. Stainless steel body material. Manual operated. 0.312 Orifice. 100 Percent factory... Less

Don't just buy products. Join our club! We have the very best techsupport in the HHO industry. We educate our members and help each member individually get results. Installing our dry cell will increase your eninges performance, increase horse power, reduce emmissions, increase MPG 30% minimum, eliminate harmful unsed fuel, clean engine of unused fuel deposits, increase your engines life expectancy and also qualify you for a tax credit. This all occurs by allowing you to use all of your fuel put into your vehicle. We offer a 30 day money back guarantee for unused or unassembled products, if you receive products and are not happy for any reason. We also offer a $25 rebate for any member who sends us a testimony video of their HydroClubUSA insatall. Here is a couple testimonies. 1986 GMC... Less

This Parker V series inline needle valve has a brass body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends to connect two male threaded pipes going in the same direction. The brass body offers higher corrosion resistance than steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 3,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse regulation of both liquids and gases. The nylon 6/6 hand... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and... Less

This Parker V series inline needle valve has a brass body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends to connect two male threaded pipes going in the same direction. The brass body offers higher corrosion resistance than steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 3,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse regulation of both liquids and gases. The nylon 6/6 hand... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends. It connects two male threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and... Less

Ball Valve for Reverse Osmosis RO Water Tank 1/4 - 1/4 + 1/4 Inline Tap Shut Off Valve Please visit our store , you will find what you need Description 1/4 Inline Tap Shut Off Valve Features: Can be fitted to any application were 1/4 lldpe water pipe tubing is used 1/4 pushfit on both sides - simply insert pipe 2 options - on and off. when in ON position , the water will flow as normal. When in OFF position , the water is turned off. S hut-off ball valve for RO water storage tank Features:

This Parker V series inline needle valve has a brass body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and double ferrule compression fittings on both ends for leak-resistant seals. it connects two pipes going in the same direction. The brass body offers higher corrosion resistance than steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 3,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse regulation of both liquids and gases. The nylon... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends. It connects two male threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and single ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and double ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and single ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off... Less

This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and male National Pipe Taper (NPT) threads on both ends to connect two female threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotriflu oroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and... Less

YOU ARE BIDDING ON ABRAND NEW IN LINE SERVICE AND SHUT OFF VALVE BOTH SIDES ARE 5/8 INCH ID. BID WITH CONFIDENCE 3/8 ID AND OTHER SIZES ARE ALSO AVAILABLE.

This Parker V series inline needle valve has a brass body, nylon 6/6 hand wheel, needle stem, integral bonnet, and double ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The brass body offers higher corrosion resistance than steel. Operating temperatures range from -65 to +400 degrees F (-54 to +204 degrees C) at up to 3,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The regulating needle stem type N, made of 316 stainless steel, conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes, and it provides coarse regulation with metal-to-metal shut-off in liquids. The nylon 6/6 hand wheel,... Less