HYDRAULIC TOE & SADDLE JACK Toe Jacks are Designed for the Vertical Lifting of Machinery and Equipment. These jacks are specifically engineered with the highest level of safety and stability to lift heavy machinery for repair or in preparation for transportation. The height adjustable low-profile toe hook and larger surface area top saddle allow for greater flexibility. Industrial rated hand activated hydraulic pump with 7,542 psi working pressure has an integral bypass valve for safety. Cast iron toe ensures years of service and anti-slip pads on the top plate and tow hook offer the highest possible load friction for safe lifting. Coupling adapter is included for remote operation of two or more jacks with a pump. Lowering screw offers precise lowering of the load. Handle... Less

HYDRAULIC TOE & SADDLE JACK Toe Jacks are Designed for the Vertical Lifting of Machinery and Equipment. These jacks are specifically engineered with the highest level of safety and stability to lift heavy machinery for repair or in preparation for transportation. The height adjustable low-profile toe hook and larger surface area top saddle allow for greater flexibility. Industrial rated hand activated hydraulic pump with 7,542 psi working pressure has an integral bypass valve for safety. Cast iron toe ensures years of service and anti-slip pads on the top plate and tow hook offer the highest possible load friction for safe lifting. Coupling adapter is included for remote operation of two or more jacks with a pump. Lowering screw offers precise lowering of the load. Handle... Less

Power Team Cylinders come standard with swivel caps to reduce the effects of off-center loading. Cylinders may be "dead-ended" without damage. Hard chrome plated, heat treated piston rod reduces wear on piston and gland nut. Built-in safety relief valve prevents over- pressurization of the retract circuit. Each cylinder has two 9796 3/8" NPTF female couplers.

Power Team Cylinders come standard with swivel caps to reduce the effects of off-center loading. Cylinders may be "dead-ended" without damage. Hard chrome plated, heat treated piston rod reduces wear on piston and gland nut. Built-in safety relief valve prevents over- pressurization of the retract circuit. Each cylinder has two 9796 3/8" NPTF female couplers.

Hydraulic Maintenance Set, Heavy-duty, Capacity 5 Tons, Capacity With Attachments 2.5 Tons, Max Working Pressure 10,000 Psi, Number Of Pieces 39, Stroke 5.00 In, For Pushing, Pulling, Lifting, Pressing, And Clamping, Includes 6w461 Hand Pump, 6bu60 Hose, 4z484 Cylinder, 3kd63 Gauge, 3kd40 Gauge Adapter, 34 Attachment Components And Wood Case

Arcan shop presses are engineered to the highest standard. Certain to handle any job. U.S.A. Continuous Force (Tons): 50, Bed Opening (in.): 8 3/16, Working Range (in.): 45, Stroke Length (in.): 5 ...

Universal Hydraulic Flare Tool Set consistently fabricates accurate flares in aluminum, steel and soft metals...1-handed operationWith just one hand, you can use this tool set to accurately fabricate these line-flaring types in aluminum, steel and soft metals (but NOT stainless steel)Push-Connect 1/4, 5/16 and 3/8GM Fuel Line 5/16 and 3/8Single/Double 3/16, 1/4, 5/16, 3/8 and 1/2Metric Bubble 4.75mm, 6mm, 8mm and 10mmUse 1 hand to fabricate accurateflares in aluminum, steel, soft metals It's worth the investment to do it right, because the expert line-flaring you expect from this tool set can help prevent leakage. Hydraulic flare tool and all dies come in a molded, compartmentalized storage box. Instructions and 1-year mfr's. warranty included. Imported. Winner of the 2005 Professional... Less

Hydraulic Hose 4 SH - 1 1/2" ID - 4 Spiraled Layers of Steel Wire - Hose Only - 50 Feet Construction: Tube: Oil resistant, Synthetic rubber (black) Reinforcement: 4 spiraled layers of high tensile steel wire Cover: Oil & Abrasion reistant, synthetic rubber Temperature: -40 ° to +250 ° F Specifications: 50 Feet 4 spiraled layers of high tensile steel wire 1 1/2" ID (Inner Diameter) 2.11 OD (Outter Diameter) W.P. (PSI) 4200 Burst Pressure (PSI): 16800

PORTABLE HYDRAULIC DRUM JACK This hydraulic drum lift raises and lowers 55 gallon steel drums with ease. Portable drum jack features a pallet truck style push/steer/pump handle that lifts and lowers drums with ease. Drum jack rolls smoothly on two 6" swivel and two 3" rigid nylon casters. 800 lb. capacity and 5" drum lift height. 29.00 L. 50.00 W. 17.00 H.

Power Team Cylinders come standard with swivel caps to reduce the effects of off-center loading. Cylinders may be "dead-ended" without damage. Hard chrome plated, heat treated piston rod reduces wear on piston and gland nut. Built-in safety relief valve prevents over- pressurization of the retract circuit. Each cylinder has two 9796 3/8" NPTF female couplers.

12TON 37TABLE TOP HYDRAULIC PRESS"

Greenlee 750 Specifications: Capacity: 1000 kcmil (MCM) (500 mm2) copper or aluminum cable Jaw Opening: 1-15/16" (49 mm) Weight: 29 lbs. (13.2 kg)Greenlee 750 Features: Hydraulic Cable Cutter with 767 Hand Pump Ram Hydraulic Hose in Storage Box Cuts in 7 seconds. Jaws slide open quickly to save time between cuts. 11-ton (97 kN) ram powers cutting jaws. Jaws are specially hardened and precision ground to hold sharpness. Lightweight and easy to use.

254 Schaeffer Supreme Hydraulic OilISO 32 thru 220 Exceeds Denison HF-O, DIN 51524 Part 2, ISO 6743/4 type HM, Includes VarniShield, Same as #112 with Para- SyntheticHTC Supreme is a premium quality semi-synthetic, non detergent, rust and oxidation inhibited, anti-wear oil that is specially formulated to meet the lubrication requirements of all types of air lines, pumps, vacuum pumps, hydraulic, turbine, compressor, bearing and general oiling applications. Includes VarniShield... See detailed description...

  The Triumph 5551EP Hydraulic Paper Cutter has the capability to cut a 21-1/2" wide sheet, and a stack of materials as thick as 3-5/8". The Triumph 5551EP Cutter offers the same features as the popular Triumph 550-EP cutter, but with the added benefit of safety light beams to protect the operator and help you perfectly align your paper, as well as an automatic back gauge that advances to the next cut automatically. A hydraulic blade and adjustable hydraulic clamp drive, the clamp is guided on both sides to apply even pressure along entire cutting width and is fully adjustable between 1,900 and 3,800 psi and includes a false clamp and foot pedal for pre-clamping. The programmable EP back gauge control module stores up to 99 programs. The high storage capacity, programmable "EP"... Less

The heavy duty high pressure hydraulic rubber hoses from the 900 Series are the most complete offering of hydraulic hoses with 35 models up to 50 feet in length. They are rubber coated with two layers of steel wire braids and are designed to comply with Material Handling Institute IJ-100 hose specification. A flexible, with little memory hose, is the best choice for long hose runs.

Punch holes in steel faster than manual wrench-style punches This 14 piece hydraulic punch kit makes it quick and easy to - Visit Harbor Freight Tools For More Information.

Category 1 Pin hole ¾" Min length 18.11" / Max length 26.37" Cylinder bore 2" Rod Diameter 1.18 Stroke 8.25" Double-piloted check valve Ports 3/8" BSP (Includes BSP Male to NPT Male Adaptor) See image Double-Acting cylinder High-Quality chrome plated & polished rod Honed & Finished Steel Tube Top Quality Seals Pressure Tested 4-Year Warranty Standard Color is Graphite 67852 Hydraulic Hose Kit works well with our top links

Dual flow regulator has on/off control plus system relief and pressure compensated to 22 or 40 GPM. Port Size (in.): 3/4 NPT, Flow (GPM): 10/30, Max. PSI: 2,000, Relief PSI: 1,500, Material Type: A...

Also known as: SUN-5220, SUN5220, SUU-5220; All welded steel contruction Heavy-duty return springs for fast ram retraction 20 Ton - Hydraulic unit included Reinforced head plate Designed and made in the U.S.A, hydraulic jack imported Bed plates, bearing punch, and bearing sheild included as standard equipmentSpecific ations:Capacity: 20 tonsHeight: 67"Base width: 32"Stroke: 7"Shipping weight: 265 lbs.

Makes Open-End Case Storage and Handling Easy Adds Stability to Narrow Cases Swivel Casters Allow Maneuvering in Tight Spaces For moving large crates of glass or other heavy objects, a pair of CRL Rol-A-Lifts can lift, transport, and safely deliver these somewhat difficult to manage items. The hydraulic jack mechanism permits safe, positive lifting and lowering of loads of up to 4,000 pounds (1,814 kilograms) when used in pairs. One CRL Rol-A-Lift can be used in conjunction with another CRL Dolly. Another nice feature of the Rol-A-Lift is that it has swivel casters on each of the lifts for maximum maneuvering when space becomes an issue. There are also top clamps that add stability to taller objects so you can stay focused on the direction of travel. With a maximum lift of 12 inches (305... Less

This 10 Ton 14 Piece Hydraulic Punch Driver Kit is new and in the manufacturer original box. 10 Ton 14 Piece Hydraulic Punch Driver Kit-Hydraulic Punch Driver punches holes in steel much faster than manual wrench-style punches. Knockout punch driver are great for punching a bunch of holes in steel. This punch driver features a hydraulic design that works fast and cuts clean. Includes 10-ton hydraulic pump with pressure hose, five punches and dies, 3/4" and 3/8" threaded studs, an adapter, and a carrying case. Punch holes up to 2" in diameter Maximum capacity: 11 gauge mild carbon steel, 16 gauge stainless steel Die sizes (actual hole size x pipe diameter): 1.115" x 3/4" 1.362" x 1" 1-11/16" x 1-1/4 "

Hydraulic Concrete Cutting Chain Saw, Standard Reach, Cutting Capacity 15 In., Chain Speed @ 8 Gpm 5500 Fpm, Chain Pitch 0.404 In., Chain Gauge 64, Pressure Port 3/4-16 Sae O-ring, Return Port 3/4-16 Sae O-ring, Min. Flow (gpm) 8, Recommended Hydraulic Flow 8 Gpm, Max. Flow Gpm 8, Relief Valve Psi Setting 2500, Max. Oil Temp. 150 F, Viscosity (sus @ 100 F) 5 To 2000, Sound Level Db 88, Length 23 In., Width 9-1/2 In., Depth 10-1/2 In.

Hydraulic Punch Driver Set, Number Of Pieces 16, Capacity Up To 10 Ga Stainless Steel, Conduit And Pipe Size 1/2 To 2 In, Punching Holes In Stainless Steel, Mild Steel, Copper, Aluminum And Brass, For Use With 11 Ton Hydraulic Punch Drivers, Includes 5 Punches And Dies Sizes 1/2 To 2 In, 2 Draw Studs, Carrying Case