hydraulic crimping tools

The Burndy PAT600-LI Lithium-Ion tool incorporates the latest engineering technology with a refined hydraulic system for ultra- performance, speed and reliability in the harshest work environments. The Burndy battery actuated hydraulic tool provides a consistent, reliable connection every time. The tool provides 6 tons of crimping force and completes a crimp in approximately 3 seconds. The tool incorporates specialized latch-style head with enhanced working stroke and clearance capabilities. The latch-style head allow interference- free closure on tap connections up to the Burndy YHD-400 size. State of the art crimping head design with 180-Degree head rotation lets user get into tight areas easier. The 18V batteries provide 2.5 times more charge/discharge cycles than traditional Ni-Cd... Less

The Burndy PATMD6-LI PATRIOT high performance IN-LINE series tool is approximately 80-Percent faster than previous models. The high performance tool is battery actuated and can be operated with one hand allowing for advance, retract and hold functions for easier operation. One hand operation allows the operator one free hand to position the connector and conductor while crimping. The tool incorporates a high speed hydraulic pump generating 6 tons of crimping force and completes a crimp (YS28 4/0 copper cable) in approx. 2 sec. This design provides a consistent, reliable connection every time. Features interchangeable MD6 series jaws, capable of using W and X style dies in the permanent D3 groove. The ram holds position when trigger is released to allow the operator to check alignment... Less

The Burndy PAT750-LI PATRIOT lithium-ion tool is approximately 25-Percent faster than the previous models. In addition to faster crimp cycles, the high performance PAT750-LI has newly designed electronics that are field proven for ultimate reliability and proven to handle the harshest work environments. The ergonomic tool incorporates the latest engineering technology with a refined hydraulic system for ultra- performance, speed and reliability. The battery actuated hydraulic tool provides a consistent, reliable connection every time. The PAT750-LI features the Burndy Y750 tool head, capable of using all U style dies, and incorporates a bearing and alignment guide for use on HYGROUND and other asymmetrical connectors. The crimp head rotates 355-Degree for operation in virtually any... Less

Hydraulic Crimp Tool, Die Less, Capacity 750 Kcmil, Max. Crimping Force (tons) 6.2, Max. Pressure (psi) 10,000, Length (in.) 10-5/8, Height (in.) 2-1/2, Width (in.) 5-1/4, Crimping, For Use With External Hydraulic Pump Capable Of 10,000 Psi (700 Bar), Includes Carrying Case, Test Gauge And Test Slugs

SHIP FROM USA Condition: NEW Description: Hydraulic wire-crimping tool crimps 14 to 0 AWG copper and aluminum wires using the 9 pairs of chrome-plated steel crimping dies included. On/off knob on handle for easy ram retraction Vinyl-dipped grip for comfort and control Powder-coated jaws Ram travel: 3/8 Maximum crimping force: 8 tons Crimping range: 0-0.45 Die sizes: 0, 2, 4, 6, 7, 8, 10 and 14 Overall dimensions: 12 L x 2 W x 7-1/4 H IF YOU HAVE ANY QUESTION, FEEL FREE TO CONTACT US. PLEASE

Bends pipe with included bending dies. Hydraulic Yes. Max crimp range 7/8in.-4in. on schedule 40 only 1in on schedule 80 Maximum travel 16 1/2in. Tubing wall thickness 1/8in.-1/4in

Hydraulic Crimping Tool makes faster, more secure wire-crimping connections, to save you time and labor Hydraulic wire-crimping tool crimps 14 to 0 AWG copper and aluminum wires using the 9 pairs of chrome-plated steel crimping dies included. Ram travel: 3/8 Maximum crimping force: 8 tons Crimping range: 0-0.45 Die sizes: 0, 2, 4, 6, 7, 8, 10 and 14 Overall dimensions: 12 L x 2 W x 7-1/4 H Weight: 7.06 lbs.

The Burndy PAT4PC834-LI 4-POINT dieless C-head lithium-ion tool incorporates the latest engineering technology with a refined hydraulic system for ultra- performance, speed and reliability in the harshest work environments. The battery actuated hydraulic tool provides a consistent, reliable connection every time. The tool features a C-shaped head design making it ideal for crimping in tight areas and can be easily removed from continuous conductor runs. The dieless capability of this tool eliminates the need to purchase and maintain dies and allows connectors and splices to become range taking. The crimp head rotates 360-Degree for operation in virtually any position. The 18V batteries provide 2.5 times more charge/discharge cycles than traditional Ni-Cd batteries and provide 430-Percent... Less

Hydraulic Crimp Tool, Crimping Force (lbs.) 120,000, Max. Crimping Force (tons) 60, Max. Pressure (psi) 10,000, Height (in.) 17, Width (in.) 6, Crimping, For Use With Burndy L Dies And Alcoa 6000 Series Crimping Dies, Includes Steel Carrying Case With Storage Space For Dies

Overall length: 19 (480mm) Item weight: 9.9lbs (4.5kgs) Compression joint range: 10mm²-300mm² Max. working pressure: 16 ton Max. working stroke (travel): 22mm Besiege pressure, including 11pcs pressing hexagon dies size: 16mm², 25mm², 35mm², 50mm², 70mm², 95mm², 120mm², 150mm², 185mm², 240mm², 300mm²

Hydraulic wire-crimping tool crimps 14 to 0 AWG copper and aluminum wires using the 9 pairs of chrome-plated steel crimping dies included. On/off knob on handle for easy ram retraction Vinyl-dipped grip for comfort and control Powder-coated jaws Ram travel: 3/8 Maximum crimping force: 8 tons Crimping range: 0-0.45 Die sizes: 0, 2, 4, 6, 7, 8, 10 and 14 Overall dimensions: 12 L x 2 W x 7-1/4 H

Power Team 5/8 hp universal electric motor (50/60 cycle). Two-stage pump for rapid ram advance. Operational under low-line voltage conditions. Optional operating pressures available. Designed for use with spring-returned remote tools.

Panduit offers a wide assortment of tools to provide solutions for installing terminals, disconnects, splices, ferrules and lugs. Panduit installation tools provide quality performance and ease of installation at the lowest installed cost.The long-term reliability of Panduit installation tools provides the highest level of service to meet customer requirements.

Hydraulic Crimp Tool, Capacity 750 Kcmil, Crimping Force (lbs.) 24,000, Max. Crimping Force (tons) 12, Max. Pressure (psi) 10,000, Length (in.) 11-7/8, Crimping, Jaw Length (in.) 11-7/8, Jaw Width (in.) 1-5/8, For Use With External Hydraulic Pump Capable Of 10,000 Psi (700 Bar), Includes Crimping Head

Hydraulic Crimp Tool, Crimping Force (lbs.) 30,000, Max. Crimping Force (tons) 15, Max. Pressure (psi) 10,000, Length (in.) 15, Height (in.) 5-3/8, Width (in.) 3, Crimping, For Use With Various Dies, Includes Carrying Case

Panduit offers a wide assortment of tools to provide solutions for installing terminals, disconnects, splices, ferrules and lugs. Panduit installation tools provide quality performance and ease of installation at the lowest installed cost.The long-term reliability of Panduit installation tools provides the highest level of service to meet customer requirements.

101431 Die Rack Please check availability prior to order! Thanks for viewing our listings. Please click Ask A Question, or call us if you have a parts need that you do not see listed here. We will do our best to locate the parts you need, and make every effort to save you money.For parts information in English please call Chris at (813)365-0042 . Gracias por ver nuestros anuncios. Por favor, envíe un mensaje, o simplemente llámenos si necesita alguna's pieza que no ves listado. Mencionado H

Power Team 5.5 hp Honda OHV-type engine Remote hand control with 10' cord. Two-stage pump for rapid advance. High-pressure safety relief valve. Protective roll cage. For use with either single or double acting tools.

The Burndy PAT600-LI Lithium-Ion tool incorporates the latest engineering technology with a refined hydraulic system for ultra- performance, speed and reliability in the harshest work environments. The Burndy battery actuated hydraulic tool provides a consistent, reliable connection every time. The tool provides 6 tons of crimping force and completes a crimp in approximately 3 seconds. The tool incorporates specialized latch-style head with enhanced working stroke and clearance capabilities. The latch-style head allow interference- free closure on tap connections up to the Burndy YHD-400 size. State of the art crimping head design with 180-Degree head rotation lets user get into tight areas easier. The 18V batteries provide 2.5 times more charge/discharge cycles than traditional Ni-Cd... Less

- •Hydraulic pump design features an extremely compact, battery-powered, crimping tool for crimping terminals and DSV connectors. •Linear crimping action results in a completely symmetric crimp. •Can complete approximately 400 crimps per battery charge. •Ram can be retracted in mid-cycle to adjust connector. •Crimping head rotates 360 degrees. •Uses all Kwik Cycle 9 Crimping Dies. •Exclusive to Greenlee! State of the art 18V lithium ion battery power reduces cycle time and provides 70% more cycles per charge. In line tools have a 1.5 amp hour battery. •Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.•Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Slim profile and light weight provide for... Less

- •Hydraulic pump design features an extremely compact, battery-powered, crimping tool for crimping terminals and DSV connectors. •Linear crimping action results in a completely symmetric crimp. •Can complete approximately 400 crimps per battery charge. •Ram can be retracted in mid-cycle to adjust connector. •Crimping head rotates 360 degrees. •Uses all Kwik Cycle 9 Crimping Dies. •Exclusive to Greenlee! State of the art 18V lithium ion battery power reduces cycle time and provides 70% more cycles per charge. In line tools have a 1.5 amp hour battery. •Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.•Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Slim profile and light weight provide for... Less

Thomas & Betts TBM15I 15-Ton Hydraulic Crimping Head has a new head made of forged steal and insulated with a rubber boot. The longer, slimmer design enables easier access into tight spaces, such as in cable trays and central office applications. The wider jaw opening eases crimping of larger lugs, C-taps and H-taps. It uses 15600 Series dies; can also use 15500 Series dies with 15500-TB adapter. Since the 1930's Thomas & Betts has been supplying tools, dies and connectors. Today, with more than 75 years experience in tools, dies and connectors, Thomas & Betts still sets the standard for innovation, quality and performance for application tooling. Rely on Thomas & Betts tools for labor saving features, user comfort and convenience, long service life and extraordinary value.