Category

Tools and Accessories
Showing results for "hub puller tool"
Results 1 - 40 of 1500+

OTC Tools & Equipment 7394...

$119.99
CPO Outlets OTC Tools & Equipment 7394 Universal Hub Puller Tool with Wrench
+ $6.99 shipping
/otc-tools-equipment/4teMZzF48sXxI9jeUfRkrg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Universal Hub Puller Tool with Wrench - 7394. Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5 in. to 8 in. plus bolt circles.. Forged puller assembly coupled with a 1 in. drive screw capable of 20 tons of force. Drive screw approved for use with an impact gun and supplied with a puller wrench designed to be struck with a hammer. Additional puller legs may be added to the center hub for special application. Optional puller plate model 6574 (Sold Separately)
More

Otc Tools Hub Puller...

Free Shipping
2 stores Otc Tools Hub Puller Adjustable Sliding Arms 7.50 Maximum Bolt Circle Universal
More

JIMS Universal Clutch Hub...

$81.99
J&P Cycles JIMS Universal Clutch Hub Puller
+ $7.99 shipping
/jims-universal-clutch-hub/3AHRu2hYQodBGYUA0z06DA==/info
J&P Cycles
IN_STOCK ( In stock )
Works with either 3, 5 or 10-finger clutch hubs Also pulls the motor sprocket on Sportster and Big Twin Works on Sportster transmission sprockets and Big Twin rotor assemblies
More

1986 BMW 325es (E30) Tool -...

$27.95
bavarian-autosport 1986 BMW 325es (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1986-bmw-325es-e30-tool/-fDX0BQrSsmjroIubn2ARQ==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

OTC Tools & Equipment 6574...

$134.99
CPO Outlets OTC Tools & Equipment 6574 Universal Hub Puller HD with Plate
+ $6.99 shipping
/otc-tools-equipment/RWiOrVkRulWEMB5CTFe9bw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Universal Hub Puller HD with Plate - 6574. Ideal for frozen hubs, axle shafts, and other tough pulling applications. Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5 - 8 in.+ bolt circle. Pulling plate allows for quick attachment and an even pull on the popular five bolt hubs with 4 - 5 in. bolt circles. Forged puller assembly coupled with a 1 in. drive screw capable of 20 tons of force. Drive screw approved for use with an impact gun and can be struck with a hammer. Additional puller legs may be added to the center hub for special applications
More

1969 BMW 1600 (E10) Tool -...

$27.95
bavarian-autosport 1969 BMW 1600 (E10) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1969-bmw-1600-e10-tool/EdNbChNTJGGJybYYnog3sw==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

OTC Tools - (OTC6574)...

$129.47
ToolTopia.com OTC Tools - (OTC6574) Universal Hub Puller HD with Plate # 6574, Under 10 Tons
Free Shipping
/otc-tools-otc6574/y4ZK8m1s4YUnOD0HSilnYg==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
The ’Final Answer to frozen hubs, axle shafts, and other tough pulling applications Adjustable sliding legs can be positioned anywhere Wide range of 4” to 8”+ bolt circle Forged puller assembly with 1” drive screw capable of 20 tons of force Drive screw approved for use with an impact gun and can be struck with a hammer Pulling plate allows for quick attachment and an even pull on the popular 5 bolt hubs with 4-5 bolt circles. Additional puller legs may be added to the center hub for special applications. Optional puller wrench see 32942.
More

OTC Tools & Equipment 6574...

$134.99
Tyler Tool OTC Tools & Equipment 6574 Universal Hub Puller HD with Plate
+ $6.99 shipping
/otc-tools-equipment/Tm7pm_hes6MIpJGY5Zlqvw==/info
Tyler Tool
IN_STOCK ( In stock )
Universal Hub Puller HD with Plate - 6574. Ideal for frozen hubs, axle shafts, and other tough pulling applications. Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5 - 8 in.+ bolt circle. Pulling plate allows for quick attachment and an even pull on the popular five bolt hubs with 4 - 5 in. bolt circles. Forged puller assembly coupled with a 1 in. drive screw capable of 20 tons of force. Drive screw approved for use with an impact gun and can be struck with a hammer. Additional puller legs may be added to the center hub for special applications
More

OTC 7394 Universal Hub Puller

$125.43
Walmart.com OTC 7394 Universal Hub Puller
Free Shipping
/otc-7394-universal-hub/hlYRFhVhYFfF72pmPk8J5A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Universal Hub Puller, Max. Spread 7 1/2 In., Min. Spread 2 In., Screw Size 1-14, Screw Width 7 1/2, Adjustable Sliding Arms For Quick Removal Of Wheel Hub, Includes Striking Wrench And Puller Screw Features Application : - Capacity : - Dia. : - For Use With : - Use w/Jaw or Push Puller No. : - Includes : Striking Wrench and Puller Screw Item : Universal Hub Puller Max. Spread (In.) : 7-1/2 Min. Spread (In.) : 2 Function : Adjustable Sliding Arms For Quick Removal Of Wheel Hub Reach : - Screw Size : 1-14 Screw Width : 7-1/2
More

1978 BMW 320/6 (E21) Tool -...

$27.95
bavarian-autosport 1978 BMW 320/6 (E21) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1978-bmw-3206-e21-tool/wFOoYxys5fI1NZK1nF1EPg==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

1991 BMW 325i (E30) Tool -...

$27.95
bavarian-autosport 1991 BMW 325i (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1991-bmw-325i-e30-tool/3C9J964L6nvtuFLI0OIVmQ==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

1988 BMW 325is (E30) Tool -...

$27.95
bavarian-autosport 1988 BMW 325is (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1988-bmw-325is-e30-tool/gr70TU7ao4PSH32BhMi3tw==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

1991 BMW 325i Convertible...

$27.95
bavarian-autosport 1991 BMW 325i Convertible (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1991-bmw-325i-convertible/6rWeRhDwui3Ea393GURpNg==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

Kirby Rear Bearing Puller...

$12.99
EZVacuum.com Kirby Rear Bearing Puller Tool - T127
Free Shipping
/kirby-rear-bearing-puller/PP5eTcN_1zbeo8n_G7uhFg==/info
EZVacuum.com
IN_STOCK ( In stock )
Free Shipping
Kirby Rear Bearing Puller Tool. Part no # T127A, K-T127
More

Tool Aid TA66320 Axle and Hub...

$28.99
Walmart.com Tool Aid TA66320 Axle and Hub Puller Adaptor
+ $10.52 shipping
/tool-aid-ta66320-axle-and/GYFV3mo6Ko2TEG3NG9F2bw==/info
Walmart.com
IN_STOCK ( In stock )
Convert your Cat- Nos- 80000, 81000 and 81100 to a Slide Hammer Axle and Hub Puller- Adapter accepts 5/8½-18 female threaded pulling attachments- Thread onto Slugger shaft or any shaft having a 3/4½ NPSM thread to pull axles and hubs with ease- Solid stee SKU: EGLE10520
More

1992 BMW 325i Convertible...

$27.95
bavarian-autosport 1992 BMW 325i Convertible (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1992-bmw-325i-convertible/8PR62pwbiT2WfS0hS7Kl_A==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

1990 BMW 325i Convertible...

$27.95
bavarian-autosport 1990 BMW 325i Convertible (E30) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1990-bmw-325i-convertible/EBiFs010KFarvQZ-yJ_6pQ==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

OTC Tools - (OTC6298) Front...

$115.88
ToolTopia.com OTC Tools - (OTC6298) Front Hub Installer & Puller Set # 6298, Hub Tools
Free Shipping
/otc-tools-otc6298/K2qp3-6BDLY5glApbmL2lQ==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Includes: OTC-7208A Hub remover to push the axle shaft from the front hub OTC-7135A Installer is used to pull the axle shaft into the front hubs on Ford vehicles. Fits axle shafts with 20mm X 1.5 thread. OTC-7924A Installer is used to pull the axle shaft into the front hub. Fits axle shafts with 22mm X 1.5 thread.
More

POSI LOCK HP-2 Hub Puller...

$236.31
Walmart.com POSI LOCK HP-2 Hub Puller Adapter Set
Free Shipping
/posi-lock-hp2-hub-puller/NaGnwGgDZ8BM4Z5s_mIQsQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Hub Puller Adapter Set, Capacity 5 Tons, Number of Jaws 3, Jaw Reach 4 Inches, Jaw Spread 5 Inches Features Capacity (Tons) : 5 Features : - For Use On : - For Use With : - Includes : 3-Jaw 4 5-Ton Puller, Small and Large Collar Adapters,Tip Reducer/Extender, Carrying Case Item : Hub Puller Adapter Set Jaw Reach (In.) : 4 Jaw Spread (In.) : 5 Number of Jaws : 3 Number of Pieces : - Type : - Jaw Style : - Screw Size : 9/16-16 x 9-11/16 Sizes Included : - Puller Length (In.) : -
More

OTC Tools 6298 OTC - FRONT...

$172.09
Autoplicity OTC Tools 6298 OTC - FRONT HUB INSTALLER AND PULLER SET ()
Free Shipping
/otc-tools-6298-otc/0YgVlBZtGB-jdxvET4jVTA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Free Shipping
OTC Tools 6298 OTC - FRONT HUB INSTALLER AND PULLER SET () Set contains three popular tools needed when servicing the axleshaft or front hub on front wheel drive vehicles. Available individually No. 7208A Hub remover to push theaxle shaft from the front hub. No. 7135A Installer is used to pulltSets &amp Kits do not have warranty/ see individual pcsfor details
More

Tool Aid TA66300 Slide Hammer...

$75.65
Walmart.com Tool Aid TA66300 Slide Hammer Axle and Hub Puller
+ $21.29 shipping
/tool-aid-ta66300-slide/m_F8cLxVF8JazwTBVxcM1Q==/info
Walmart.com
IN_STOCK ( In stock )
Slide Hammer Axle and Hub Puller- SKU: EGLE10519
More

ATD 3058 Hub Puller

$74.99
Walmart.com ATD 3058 Hub Puller
+ $7.99 shipping
/atd-3058-hub-puller/Y1jaiRGAGbHoH17j052NRA==/info
Walmart.com
IN_STOCK ( In stock )
The 3058 Hub Puller will remove wheel hubs mounted on tapered axles and press fit rear brake drums. FeaturesCan be adjusted by legs to an 8 in. diameter bolt circleAlloy steel and drop forged construction for durabilityCenter screw 1 in.-14 x 9 in. with a 1-1/8 in. hex head for heavy-duty applicationsInclu desHub Puller - 3058Specification sCenter Screw Dimensions: 1 in.-14 x 9 in.Construction: SteelHex Head: 1-1/8 in.
More

Otc 7394 Universal Hub Puller

$128.52
Walmart.com Otc 7394 Universal Hub Puller
+ $10.77 shipping
/otc-7394-universal-hub/cIgywhEw0gt7Usy6vcu5Wg==/info
Walmart.com
IN_STOCK ( In stock )
features and benefits: with its adjustable sliding arms, this puller makes wheel-hub removal quick, easy, and damage free maximum bolt circle of 7-1/2 includes striking wrench and puller screw won't distort wheel lugs
More

Tool - Wheel hub puller and...

$69.95
bavarian-autosport Tool - Wheel hub puller and axle press - Large - CTA Tools
+ $10.95 shipping
/tool-wheel-hub-puller/_fNW1HSB8M2Jc1A2zqSo6w==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies. Hub Puller Improved design features widened hole footprint to accommodate larger 5 x 120mm lug patterns Internally machined yoke to fit over larger flanges. Plus 90mm / 7-1/2 long bolt for more applications when flange pulling and axle pushing. Will service much wider range of applications, including almost all BMW's.
More

640 6ton 5'lift Puller Lever...

$1,805.00
SharpTekSupply.com 640 6ton 5'lift Puller Lever Tool Puller Leve, 1ea - Cm Columbus Mckinnon 4050
+ $6.99 shipping
/640-6ton-5lift-puller/UYekc4WQOWX1WB7YmKnGgA==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EA640 6Ton 5'Lift Puller Lever Tool Puller Leve, 1EA - CM Columbus McKinnon 4050Forged upper and lower hooks with latches standardForged upper and lower hooks with latches standardFree wheelingHoistaloy load chain - hardened steel link type load chainMade in U.S.AMade in U.S.AMetric ratedMetric ratedMetric ratedOne-hand operation and control - only 58 pounds of pull required for 3/4 ton model capacitySimple construction with fewer partsUpper and lower latchlok hooks available for all capacitiesWeather ized Weston-type automatic braking systemWeatherproo fWeatherproofCoat ing: PaintMaterial: Aluminum AlloyType: Lever HoistWt.: 75 lbCountry Of Origin: US
More

OTC Puller/Bearing Seperator...

$100.99
Eastwood.com OTC Puller/Bearing Seperator 4518
Free Shipping
/otc-pullerbearing/Iwx3oeOIEyxnbEHokXFP2A==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
>b>Be ready for all kinds of pulling and separating jobs with this Puller/Bearing Separator Set — OTC 4518This combination set includes OTC's two most popular bearing splitters (2 and 3), four sets of hex push-puller legs, and a bar-type puller head with a 9/16 forcing screw. Separator tools are used with bar puller and legs for a wide variety of pulling jobs. The 5 puller cross-bar with a 6-1/4 forcing screw on each of the bearing separators may also be used separately or in combination with other pullers or tools. A blow-molded plastic storage case keeps set contents organized and protected from loss.
More

DAYTON 2PYL8 Hub Puller,Fan...

$69.10
Walmart.com DAYTON 2PYL8 Hub Puller,Fan and Wheel
Free Shipping
/dayton-2pyl8-hub/dlIsQPnWi6UJcUK1iyNToQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Hub Puller, Fan and Wheel, Cast Iron Construction Material, Includes 4 Jaws, Plastic Centering Sleeve, Hardened Bolt, 4 locking bolts and Instruction Sheet, To Remove Fan Blades, Wheels and Hubs From Shafts Features Application : To Remove Fan Blades, Wheels and Hubs From Shafts Depth (In.) : - Finish : - For Use With : - Height (In.) : - Includes : 4 Jaws, Plastic Centering Sleeve, Hardened Bolt, 4 locking bolts and Instruction Sheet Item : Hub Puller Outside Dia. (In.) : - Type : Fan and Wheel Width (In.) : - Agency Compliance : - Construction Material : Cast Iron
More

ATD 3058 Hub Puller

$74.99
CPO Outlets ATD 3058 Hub Puller
+ $6.99 shipping
/atd-3058-hub-puller/7ejgh0wE9WJcZBwN0MBMdg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Hub Puller - 3058. Can be adjusted by legs to an 8 in. diameter bolt circle. Alloy steel and drop forged construction for durability. Center screw 1 in.-14 x 9 in. with a 1-1/8 in. hex head for heavy-duty applications
More

K-Tool International -...

$122.99
ToolTopia.com K-Tool International - (KTI70520) 10 Way Puller Set # 70520, Slide Hammer Pullers
Free Shipping
/ktool-international/0bgrLbcyKz5jcmbrBKEdXQ==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
5 pound slide hammer puller set with various jaws and attachments allowing for 10-way internal or external jobs Jaws can be setup for 2 or 3 way pulling: (3) 2-3/8 pulling jaws, (3) 3-1/4 pulling jaws, (3) 6-1/2 pulling jaws Grip wrench adapter threads into slide hammer with 5/8 - 18 thread and threads onto a 7/16 - 14 thread adapter for pulling use Rear axle pulling attachment, front hub puller assembly, dent puller and puller hook attachment All contents of set come in a convenient plastic, blow-molded carrying/storage case Use to pull flange-type rear axles, stubborn oil seals & bearings, and other press fit parts. Lifetime limited warranty.
More

Power Team 8 Ton SPX...

$697.85
Ohio Power Tool Power Team 8 Ton SPX Hydraulic Puller Grip-O-Matic PH83C
No Shipping Info
/power-team-8-ton-spx/MZ9vWy35Tpx9Bpv5ugQwvg==/info
Ohio Power Tool
IN_STOCK ( In stock )
Power Team 8 Ton Hydra Grip-O-Matic Puller. Optimal Puller Design - the harder the pulling force, the tighter the jaw's grip. Self Contained, compact Hydra Grip-O-Matic design - no other hydraulic tools required. Easily metered release control knob. Bladder type oil reservoir. Rapid adjustment. Adjustable for use as 2 or 3 Jaw puller. Supplied with a sturdy storage case.
More

Otc 7901 Front Hub Puller For...

$63.50
Walmart.com Otc 7901 Front Hub Puller For 4 Wd Vehicles
+ $9.79 shipping
/otc-7901-front-hub-puller/rZWXVW9Fwx56gPp6CqDYxQ==/info
Walmart.com
IN_STOCK ( In stock )
features and benefits: fits bolt hole pattern 8 x 6.5 will not work on trucks with dual rear wheels use with 7703 10-lb. Slide hammer for maximum pulling force  this puller is required for removing a front hub assembly in 3/4- and 1 -ton 4wd pickups with 8-bolt hubs. It works on 1994 to 2004 dodge ram and 1988 to 2004 ford and gm. 
More

1970 BMW 2002 (E10) Tool -...

$27.95
bavarian-autosport 1970 BMW 2002 (E10) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1970-bmw-2002-e10-tool/KfOJMBMGwadZD7VXV7EKMg==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

OTC Tools - (OTC4579) Stinger...

$79.96
ToolTopia.com OTC Tools - (OTC4579) Stinger 9 Way Slide Hammer Puller Set # 4579, Slide Hammer Pullers
Free Shipping
/otc-tools-otc4579/CLdo8mREjWru6j1m5bwhhA==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Pulls flange-type rear axles and most front-wheel drive hubs Internal and external jaws provide a variety of combinations to pull bearings, gears and seals Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements Designed for use with other OTC 5/8-18 thread slide hammer attachmentsPackag ed in blow-molded caseIncludes:2 Way Cross Block Front Hub Puller Internal 3 Jaw Puller External 3 Jaw Puller Rear Axle Puller Internal 2 Jaw Puller External 2 Jaw Puller Grip Wrench Adapter Dent PullerPuller Hook Packaged in Blow-molded CaseDOWNLOAD: BROCHURE
More

Cta Tools 4320 Hub Puller

$95.05
eBay Cta Tools 4320 Hub Puller
Free Shipping
/cta-tools-4320-hub-puller/Veo7Pm8Tm-FtnU0nY2EORw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Powered by Frooition Pro Shop Search CTA Tools 4320 Hub Puller Click here to view full size. Full Size Image Click to close full size. Item Description Universal Hub Puller. Removes wheel hubs mounted on tapered axles and press-fit rear drum brakes. Adjustable legs can be extended to an 8 / 20cm diameter bolt circle. Shipping Payment Returns Terms About Us Shipping All orders ship the following business day We ship UPS or USPS depending on package weight and buyer location. Packages to HI, AK a
More

Tiger Tool 10902 Rockwell Hub...

$99.00
eBay Tiger Tool 10902 Rockwell Hub Puller
Free Shipping
/tiger-tool-10902-rockwell/R_NcrOSfnEOrHRN5RYn9Tg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Tiger Tool 10902 Rockwell Hub Puller DESCRIPTION: Seized Bearings and Frozen Brake Shoes, caused by worn-out Brake Anchor Pins and S-Cams, are no longer a problem. The Tiger Rockwell Hub Pullers will easily generate up to 25,000 lbs of force to remove even the most difficult to remove Wheel Hubs.  Made from 4140 heat-treated steel are case-hardened .003 to .004 of an inch Black Oxide finish for increased wear and corrosion resistance and aesthetic longevity Forcing screw incorporates a sizabl
More

1971 BMW 2002 (E10) Tool -...

$27.95
bavarian-autosport 1971 BMW 2002 (E10) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1971-bmw-2002-e10-tool/dI8LoqHkLpjIGQzdU3rofA==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

OTC OT7394 Universal Hub...

$119.31
Walmart.com OTC OT7394 Universal Hub Puller
+ $10.91 shipping
/otc-ot7394-universal-hub/mwRe4L9vymO_69X1k0sQrw==/info
Walmart.com
IN_STOCK ( In stock )
Has readily adjustable sliding arms to pull wheel hubs quickly and easily- Maximum reach is 7-1/2'' bolt circle- Provides a straight pull - will not distort wheel lugs- Five legs should be used on Cadillac and Jeep hubs (extra legs available separately)- Striking wrech and puller screw included- SKU: EGLE1203
More

OTC Tools 7208A OTC Hub...

$39.19
Autoplicity OTC Tools 7208A OTC Hub Remover/Puller
+ $5.11 shipping
/otc-tools-7208a-otc-hub/ArxMgBB4la5I6CHT0Ph0Kw==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
OTC Tools 7208A OTC Hub Remover/Puller The 7208 puller removes front hubs without damaging the wheelbearing. Its universal design fits most FWD cars. The spare locknutlets you use it with a standard slide hammer puller for rear axleflanges.This puller can be added to a standard 5/8 thread slidehammerRemove s hubs on most front wheel drive cars
More

1975 BMW 2002 (E10) Tool -...

$27.95
bavarian-autosport 1975 BMW 2002 (E10) Tool - Wheel hub puller and axle press
+ $8.95 shipping
/1975-bmw-2002-e10-tool/glAYuUDCjGsmdXZlzxl9Sw==/info
bavarian- autosport
IN_STOCK ( In stock )
Store not rated
Use this tool to press the splined axle end out of the wheel flange or hub on rear-wheel drive, front-wheel drive and 4-wheel drive BMWs and MINIs. This tool is also used to pull the front wheel bearing hub on 2-wheel drive BMW models with sealed bearing and hub assemblies.
More

640 1.5 Ton 10' Lift Puller...

$902.08
SharpTekSupply.com 640 1.5 Ton 10' Lift Puller Lever Tool, 1ea - Cm Columbus Mckinnon 4062
+ $6.99 shipping
/640-15-ton-10-lift/t18BbnkUFZH7q7POGYIS7A==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EA640 1.5 Ton 10' Lift Puller Lever Tool, 1EA - CM Columbus McKinnon 4062Forged upper and lower hooks with latches standardForged upper and lower hooks with latches standardFree wheelingHoistaloy load chain - hardened steel link type load chainMade in U.S.AMade in U.S.AMetric ratedMetric ratedMetric ratedOne-hand operation and control - only 58 pounds of pull required for 3/4 ton model capacitySimple construction with fewer partsUpper and lower latchlok hooks available for all capacitiesWeather ized Weston-type automatic braking systemWeatherproo fWeatherproofCoat ing: PaintMaterial: Aluminum AlloyType: Lever HoistWt.: 30.90 lbCountry Of Origin: US
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921