Category

Sport and Outdoor
Showing results for "high point firearms 9mm carbine tactical"
Results 1 - 40 of 1500+

Redding Trim Die 30 Carbine

$31.29
MidwayUSA Redding Trim Die 30 Carbine
+ $4.99 shipping
/redding-trim-die-30/6lcJq_EfREarHrcVm-jlxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

RCBS 3-Die Set 30 Carbine

$46.49
MidwayUSA RCBS 3-Die Set 30 Carbine
+ $7.59 shipping
/rcbs-3die-set-30-carbine/3sGOF0sLnjZJMM2d76z5HA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

RCBS Sizer Die 30 Carbine

$27.49
MidwayUSA RCBS Sizer Die 30 Carbine
+ $4.99 shipping
/rcbs-sizer-die-30-carbine/xL3_hZSP3a0DGeNCYFCf3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These dies size the entire length of the case. Steel dies require the application of sizing lube to prevent damage to the case or it sticking in the die.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Expander- Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case. NOT Carbide.
More

RCBS Trim Die 30 Carbine

$35.99
MidwayUSA RCBS Trim Die 30 Carbine
+ $4.99 shipping
/rcbs-trim-die-30-carbine/8hYnO2Myi8BBtO--IuD-nQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Lyman 3-Die Set 30 Carbine

$46.99
MidwayUSA Lyman 3-Die Set 30 Carbine
+ $7.59 shipping
/lyman-3die-set-30-carbine/Djt9WgcXEo45SUbSi-ZFzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Straight wall rifle cases require these three die sets consisting of a full length sizing die with decapping stem, a two step neck expanding (M) die and a bullet seating die. Ideal for loading cast bullets due to the inclusion of the neck expanding die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) 2-Step Neck Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included.
More

Redding 3-Die Set 30 Carbine

$47.49
MidwayUSA Redding 3-Die Set 30 Carbine
+ $8.39 shipping
/redding-3die-set-30/GfoXON1kfaEyKp2AXEdM1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Lee Carbide 3-Die Set 30...

$39.99
MidwayUSA Lee Carbide 3-Die Set 30 Carbine
+ $7.59 shipping
/lee-carbide-3die-set-30/2gMxdrQv6X7kfnUoB9xbSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Threads: 7/8-14 Die... Less
More

Lyman Neck Expander M Die 30...

$21.99
MidwayUSA Lyman Neck Expander M Die 30 Carbine
+ $4.99 shipping
/lyman-neck-expander-m-die/iLd0UNrgoqHN8f_0R9xsFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating.
More

Lee Factory Crimp Die 30...

$11.49
MidwayUSA Lee Factory Crimp Die 30 Carbine
+ $4.99 shipping
/lee-factory-crimp-die-30/yRtYhu6KSLHT7RjzdSJQig==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS Carbide 3-Die Set 30...

$69.99
MidwayUSA RCBS Carbide 3-Die Set 30 Carbine
+ $7.59 shipping
/rcbs-carbide-3die-set-30/Z3fSNB_ukLbeFsBnD7SxAA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS
More

Redding Taper Crimp Die 30...

$28.49
MidwayUSA Redding Taper Crimp Die 30 Carbine
+ $4.99 shipping
/redding-taper-crimp-die/qPv48SH5Bz0N0d7ogEYd2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 30 Carbine
+ $4.99 shipping
/lee-powder-through/qvvjW8a3XSZfgQH--ZZUUg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

Redding Shellholder #22 (30...

$10.79
MidwayUSA Redding Shellholder #22 (30 Carbine, 32 ACP)
+ $4.99 shipping
/redding-shellholder-22/y0NVzu3inHGQyh8M5y2PiA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationMateri al:Steel Fits:5.7mm Johnson, 30 M1 Carbine, 32 ACP
More

Carbine H2 Heavy Buffer -...

$43.99
Brownells Carbine H2 Heavy Buffer - Carbine H3 Heavy Buffer
+ $7.95 shipping
/carbine-h2-heavy-buffer/de_PKWzfQllCLuF7QXhIQw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features: Weighs 4.6 oz Contains two tungsten weights and one steel weight Standard carbine length buffer Aluminum exterior Fits AR-15 and M16 carbine buffer tubes Use with standard AR-15/M16 carbine buffer springs H3 is 5.4 oz Benefits: Increased weight allows for more reliable function in rifles with shorter gas systems Heavier weight reduces bolt bounce in full auto fire Increased weight also softens recoil 4.6 oz weight also allows for a longer dwell time slowing down the cycling of the rifle H3 is 5.4 oz Mfg: Colt
More

AimShot 40 S&W Arbor for 30...

$9.99
MidwayUSA AimShot 40 S&W Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-40-sw-arbor-for/DcIIj6MYpD0_KynhCx4Yqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

AimShot 45 ACP Arbor for 30...

$9.99
MidwayUSA AimShot 45 ACP Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-45-acp-arbor-for/hxn-lWC1eJRQVrhhSzGNkg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

AimShot 44 S&W Arbor for 30...

$9.99
MidwayUSA AimShot 44 S&W Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-44-sw-arbor-for/f2_IBtPvtovDZnVK7_DrZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

AimShot 38 Special, 357...

$9.99
MidwayUSA AimShot 38 Special, 357 Magnum Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-38-special-357/KMjfzNEOlZlJYyEmynNm9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Carbine 2500 Backpack-...

$199.95
CampSaver.com Carbine 2500 Backpack- Highlander
Free Shipping
/carbine-2500/OP_5KQpbcXOGM8QS4a96jw==/info
CampSaver.com
IN_STOCK ( In stock )
Free Shipping
The Slumberjack Carbine 2500 is comfortable and versatile making it ideal for all day or minimalist overnight hunts. This pack provides plenty of room for all your gear and multiple pockets to keep it all organized.
More

AimShot 45 Long Colt, 45-70...

$9.99
MidwayUSA AimShot 45 Long Colt, 45-70 Government Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-45-long-colt/daEBvF_ZA6aZAoN6OgCvow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Redding Extended Shellholder...

$15.79
MidwayUSA Redding Extended Shellholder #22E (30 Carbine, 32 ACP)
+ $4.99 shipping
/redding-extended/8uTlYlVhJJWBwWPkHjjdyw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Extended Shellholders are required when trimming short cases under 1 1/2 O.A.L They are machined to the same tolerances as our standard shellholders except they're longer.
More

AimShot 44 Remington Magnum...

$9.99
MidwayUSA AimShot 44 Remington Magnum Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-44-remington/G1PvoYeyo6VXYEy8fdNJHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Lee Carbide Sizer Die 30...

$32.99
MidwayUSA Lee Carbide Sizer Die 30 Carbine
+ $4.99 shipping
/lee-carbide-sizer-die-30/8Qsf4rOfLi6R66yq0gX9ww==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been making high quality reloading equipment for over 50 years. Lee Carbide Sizing Dies are great for straight wall cartridge cases. The solid carbide insert is ground to a special contour that will not leave a belt mark on the cartridge case. Carbide dies require no lubricant and will actually burnish the case to improve the finish. Carbide dies will last a lifetime and not wear out. Shellholder sold separately. Technical Information Material: Steel Die Type: Carbide Sizing Die Accessories: Plastic Storage Box Notes: No lubrication required
More

RCBS Carbide Sizer Die 30...

$57.99
MidwayUSA RCBS Carbide Sizer Die 30 Carbine
+ $4.99 shipping
/rcbs-carbide-sizer-die-30/bKBsbvmP_Qa1OLb6ByQFWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Carbide Sizer Die eliminates the need for case lubrication. Sizes and decaps in one quick step. Shellholder sold separately. Includes a plastic storage case and Lifetime Guarantee from RCBS
More

Redding Expander Die 30...

$20.49
MidwayUSA Redding Expander Die 30 Carbine
+ $4.99 shipping
/redding-expander-die-30/n2Ur5Qj7D-eSzV9sEn6FtA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Expander Dies flare the case mouth slightly to facilitate bullet seating. These dies are held to strict manufacturing tolerances at all stages and are heat treated to relieve stress and provide a lifetime of use. Made in the USA. Technical InformationMateri al: Steel Die Type: Expander Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth.
More

Magpul CTR Carbine Stock

$60.95
Walmart.com Magpul CTR Carbine Stock
Free Shipping
/magpul-ctr-carbine-stock/m0a7KCsE10YDYXFNk1RxFA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Magpul CTR (Compact/Type Restricted) is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55 rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
More

M1 Carbine M6-B Forward Optic...

$99.99
Brownells M1 Carbine M6-B Forward Optic Mount - M6-B Forward Optic Mount
+ $7.95 shipping
/m1-carbine-m6b-forward/xO2m1Al2svG8wc9VQ7efdg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Get the full accuracy potential from your M1 Carbine by replacing its handguard with a reliable, CNC-machined mount for extended eye relief scopes, red dot, reflex, and laser sights, or tactical accessories. Full length, low profile rail uses 1913 Picatinny pattern; provides excellent stability and allows wide field of view for fast target acquisition. Dual, high-strength, steel clamps secure mount to barrel, forward of the gas block. No need to remove standard issue iron sights and will not interfere with case ejection. Synthetic and Israel Arms International stocks may require minor inletting in the forend to accommodate clamps. Will not fit Universal brand carbines. Mfg: Ultimak SPECS: Mount - 6061-T6 aluminum, hard anodized, matte black. 8-1/6 (20.5cm) long. Clamps - 4140 steel, matte... Less
More

RCBS Taper Crimp Seater Die...

$23.99
MidwayUSA RCBS Taper Crimp Seater Die 30 Carbine
+ $4.99 shipping
/rcbs-taper-crimp-seater/seBWR6xSmu5QCetz3u4Llg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use. Technical InformationMateri al: Steel Die Type Included: Taper Crimp Seater Die Accessories: Plastic storage case Notes: The crimp gently tapers tighter and tighter to hold the bullet in place. It does not affect the overall length of the cartridge. This is very important for semi-automatics where the cartridge headspaces on the case mouth. A Bullet seater is used to push (seat) the bullet down into the case to a specific depth.
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 30 Carbine
+ $4.99 shipping
/le-wilson-trimmer-case/QrlTOni9j1vCxjDgRj8UmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth..
More

Lee Load-Master Progressive...

$22.99
MidwayUSA Lee Load-Master Progressive Press Shellplate #7 (30 Carbine, 32 ACP)
+ $4.99 shipping
/lee-loadmaster/oWypyKMhutOJze-bVNdDiQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Quick change Shellplates for the Load-Master Press. Please consult the Technical Specifications below for specific caliber information. Technical Information Function: Shell Plate Lee Load-Master Progressive Press Material: Steel Notes: Fits: 30 M1 Carbine32 ACP Note:Lee also lists this shellplate as working with 32 ACP. However, some 32 ACP brass will not fit. If you find that your 32 ACP brass will not work, Lee will modify the shellplate for you at no charge. Please send a few sample pieces of your brass with the shellplate to: Lee Precision Inc. 4275 Highway U Hartford, WI 53027 Lee will make the changes and return the shellplate to you.
More

L.E. Wilson Case Length Gage...

$15.49
MidwayUSA L.E. Wilson Case Length Gage 30 Carbine
+ $4.99 shipping
/le-wilson-case-length/xuclXHtHtAhyqyJoZha_qQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. This steel case length gage allows reloaders to easily identify any case that exceeds the maximum allowable case length according to SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: Allows reloaders to easily identify cases that are beyond maximum length
More

AimShot Laser Bore Sight 30...

$32.99
MidwayUSA AimShot Laser Bore Sight 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-laser-bore-sight/G2abrbGmaFSfPv5PaVIMsA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Aimshot Laser Bore Sight Module inserts into your gun's chamber and emits a laser through the barrel so that you can adjust the sights or scope to be on paper at 25 yards. This saves both time and ammunition when sighting in. This laser diode will work alone for the specified caliber, or with other available arbors (sold separately) to adapt the diode for use with other rifle calibers. External battery box models provide shooters with the same reliability and performance, but with the added benefit of extreme battery life. They are powered by 2 AAA batteries (included) for up to 28 continuous hours, 22 hours for the 20x Model that features a brighter laser than the other models. The magnetic battery box attaches to any metal surface on the firearm and doubles as a storage compartment... Less
More

AimShot Laser Bore Sight 30...

$34.99
MidwayUSA AimShot Laser Bore Sight 30 Carbine Diode with External Battery Box
+ $4.99 shipping
/aimshot-laser-bore-sight/_XkDSOLBcrJbgkUZPBWRWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Aimshot Laser Bore Sight Module inserts into your gun's chamber and emits a laser through the barrel so that you can adjust the sights or scope to be on paper at 25 yards. This saves both time and ammunition when sighting in. This laser diode will work alone for the specified caliber, or with other available arbors (sold separately) to adapt the diode for use with other rifle calibers. External battery box models provide shooters with the same reliability and performance, but with the added benefit of extreme battery life. They are powered by 2 AAA batteries (included) for up to 28 continuous hours, 22 hours for the 20x Model that features a brighter laser than the other models. The magnetic battery box attaches to any metal surface on the firearm and doubles as a storage compartment... Less
More

Hornady Lock-N-Load AP...

$41.99
MidwayUSA Hornady Lock-N-Load AP Progressive Press Shellplate #22 (30 Carbine, 32 ACP)
+ $4.99 shipping
/hornady-locknload-ap/hBcQ_A3yZuvMR-qITGpNoA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the Hornady shellholder numbers for different calibers. These shellplates are designed to work with the EZ-Ject System and Pro-Jector presses. Technical Information Press: Hornady Lock-N-Load AP Material: Steel Notes: Fits: 30 M1 Carbine and 32 ACP
More

Carbine 2500 Backpack-...

$199.95
CampSaver.com Carbine 2500 Backpack- Mandrake
Free Shipping
/carbine-2500/yWhW843kI8vGg_s24uNEkA==/info
CampSaver.com
IN_STOCK ( In stock )
Free Shipping
The Slumberjack Carbine 2500 is comfortable and versatile making it ideal for all day or minimalist overnight hunts. This pack provides plenty of room for all your gear and multiple pockets to keep it all organized.
More

Rba9 Razor Tactical...

$37.49
eBay Rba9 Razor Tactical Pistol/carbine Muzzle Brake 9mm 1/2-36 Model 15 Carbines Usa
Free Shipping
/rba9-razor-tactical/O_ExsKxP-PJvFvHOcnQ-EQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Razor Tactical Pistol/Carbine Muzzle Brake Made in the USA, offered by US seller. RBA9 1/2-36TPI threads for Model 15 9mm Carbines, others The Razor Tactical Pistol design yields serious recoil reduction effectiveness for pistols and carbines while adding breaching teeth. This means fast follow up shots or emptying your mag with little muzzle rise and less recoil. These are designed to work with any pistol with proper installation. Key Features: Set screw and wrench included (ready to install)
More

RCBS Pro Chucker 5...

$29.92
MidwayUSA RCBS Pro Chucker 5 Progressive Press Shellplate #17 (30 Carbine, 32 Auto)
+ $4.99 shipping
/rcbs-pro-chucker-5/JO8rWp18p_ZdGc1tyl-72A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Pro Chucker 5 Progressive Press Shellplate makes changing calibers a breeze on your Pro Chucker 5 press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the RCBS shellholder numbers for different calibers. Technical InformationPress: RCBS Pro Chucker 5Limited lifetime warrantyMade in the USA
More

Buffers - Carbine Buffer

$31.99
Brownells Buffers - Carbine Buffer
+ $7.95 shipping
/buffers-carbine-buffer/IF3rWSoeckftPm66dLd0sA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Genuine DPMS factory parts will help you repair an existing rifle or correctly install a stock to a custom build. Buffers and springs are weighted to function properly in DPMS LR-308 and Remington R-25 rifles. Rifle Buffer fits buffer tube for fixed, A2-type rifle stock; will not work in carbine tube. Mfg: Dpms SPECS: Carbine Buffer Steel body. 2½ long, 3.7oz. wt. Rifle buffer Aluminum body. 4-7/8 long.
More

BlackHawk Sport Tactical...

$29.51
Walmart.com BlackHawk Sport Tactical Carbine Case, 36, Black
+ $4.97 shipping
/blackhawk-sport-tactical/9bK8wvmPfOHqPn6U-adB6g==/info
Walmart.com
IN_STOCK ( In stock )
Includes all standard weapon case and bag features. Holds carbines up to 36 inches long. Four external mag pockets and two large accessory pockets for gear.
More

M1 Carbine Rear Aperture...

$26.99
Brownells M1 Carbine Rear Aperture Sight - Rear Aperture Sight
+ $7.95 shipping
/m1-carbine-rear-aperture/T0eUBsRSTd2P1A-cia71Aw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Modern, high-quality reproduction of the original rear sight makes restoring your M1 carbine easier and the final job look authentic. Patterned after the factory rear sight using modern CAD/CAM design techniques and wire EDM cut from 4140 bar stock for tight tolerances. Features audible clicks for precise windage adjustment and preset range increments for elevation adjustment. Mfg: Kensight Mfg. SPECS: Steel, blued, matte finish. Fits M1 Carbine.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335