Hendy Lathe Home and Garden - Shopping.com
Showing results for "hendy lathe"
Results 1 - 40 of 1500+

SHOP FOX Lathe - 10 Inch x 20...

$1,729.99
Northern Tool SHOP FOX Lathe - 10 Inch x 20 Inch, Model M1016
Free Shipping
/shop-fox-lathe-10-inch/t2hqoyQPrH-38VTNVGRvTw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Lathe M1016 is an excellent small-sized lathe with an impressive 9 3/4in. swing and 21in. distance between centers. Includes handy accessories like 5in. 3-jaw chuck, eye shield and 4-way turret tool post. Cannot ship to AK, CA, HI, MA, MD and RI. Width Between Centers in. 21, Stand Included No, Dimensions L x W x H in. 23 x 44 x 17 1/2, HP 3/4, Volts 110, Thread Cutting in. 8 TPI-40 TPI in 12 steps, Speed RPM 150-2,400, Thread Cutting mm 12 at 0.4-3.0. 5in., 3-jaw chuck Cross slide table 11 change gears 2 dead centers 4-way turret tool post Eye shield Forward/reverse switch with emergency stop Swing 9 3/4in. Swing over cross slide 6in. Spindle bore 3/4in. Spindle taper MT #3 Tailstock taper MT #2 Tailstock barrel travel 1/2in. Cross slide travel 4 1/4in. Compound travel 2... Less
More

Laguna Revo Lathe MLAREVO20

$3,400.00
Elite Metal Tools Laguna Revo Lathe MLAREVO20
Free Shipping
/laguna-revo-lathe/AhCneAGTOoUuR0Jxw6ye7A==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

SHOP FOX Bench Lathe - 10...

$2,049.99
Northern Tool SHOP FOX Bench Lathe - 10 Inch x 26 Inch, Model M1099
Free Shipping
/shop-fox-bench-lathe-10/InmPgeqUUqMFlHi1-AHnlw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This SHOP FOX Bench Lathe makes changing the thread selections quick and easy. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This 6-speed lathe also has extended length hardened and ground precision bedways, 1in. spindle bore, a selection of chucks, face plate and other accessories. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 22 1/2, Dimensions L x W x H in. 50 x 32 x 16 5/8, HP 1, Volts 110 single phase, Width Between Centers in. 26, Spindle Speeds qty. 6, Stand Included No, Thread Cutting in. 33 at 8-72 TPI, Thread Cutting mm 26 at 0.25-3.5, Speed RPM 1,725. 5in. 3-jaw chuck with two sets of jaws 6 1/2in. 4-jaw chuck with... Less
More

SHOP FOX Mini Lathe - 6 Inch...

$739.99
Northern Tool SHOP FOX Mini Lathe - 6 Inch x 10., Model M1015
Free Shipping
/shop-fox-mini-lathe-6/qLmrg6sv7nCrLCIcZuTKNw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. The M1015 gives model makers, toolmakers, gun hobbyists and weekend machinists a way to economically produce small precision parts, threaded parts, fittings, and dies. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Center Height in. 10, HP 1/5, Volts 110, Stand Included No, Speed RPM 100- 2000. 3in. chuck with internal and external jaws Swing over bed 6in. Distance between centers 10in. Cross slide travel 2 3/8in. Spindle bore 3/8in. Spindle taper MT #2 Tailstock taper MT #1 Model Number: M1015. Size: 10. Age Group: Adult.
More

Acra High Speed Precision...

$51,000.00
Elite Metal Tools Acra High Speed Precision Lathe ASET3260
Free Shipping
/acra-high-speed-precision/COpT4V6tGeEQ323-DX-3dQ==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
More
Spindle supported by precision tapered roller bearings. Hardened and ground bedways. Power...
More

Acra Gear Head Lathe GH1400A

$6,795.00
Elite Metal Tools Acra Gear Head Lathe GH1400A
Free Shipping
/acra-gear-head-lathe/sPU8CQVW46nLU07wBnqA2w==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

South Bend 16 x 40 Gearhead...

$22,230.00
Elite Metal Tools South Bend 16 x 40 Gearhead Lathe with DRO SB1054F
Free Shipping
/south-bend-16-x-40/G3gcg0arjE4vRvpbSyzMWA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

Nicholson 10 Fine Cut Long...

$16.29
MidwayUSA Nicholson 10 Fine Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-fine-cut/IQk0bTBJRtFjxMyvLkfATg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.185 thick, 0.935 wide File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

Lathe Back Gear - 10-241X

$269.73
Sears Parts Direct Lathe Back Gear - 10-241X
Free Shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

PTG Lathe Centering Bar 1 x 8

$94.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel.
More

Nicholson 10 Bastard Cut Long...

$15.99
MidwayUSA Nicholson 10 Bastard Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-bastard-cut/OewP2xBnhPs8eABCqXqisA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.2 thick, 0.935 wide tapering to 0.71 File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

SHOP FOX Bench Lathe - 9 Inch...

$1,479.99
Northern Tool SHOP FOX Bench Lathe - 9 Inch x 19 Inch, Model M1049
Free Shipping
/shop-fox-bench-lathe-9/-Kl6_b-5GhIVatler5R7ag==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Bench Lathe has all the features and precision of the larger lathes, but at a fraction of the cost. Check out all the features and you'll agree it's got everything you need 4in. 3-jaw chuck with two sets of jaws, 7 1/4in. 4-jaw chuck with reversible jaws, steady rest, follow rest, MT #2 and MT #3 dead center, MT #2 live center, 4-way tool post, extra C-type tool post and more Includes toolbox and tool kit. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 16, Spindle Speeds qty. 6, Stand Included No, Volts 110 single phase, Thread Cutting in. 8-56 TPI, Thread Cutting mm 0.05-3.0, HP 3/4, Width Between Centers in. 19, Speed RPM 1,725, Dimensions L x W x H in. 22 x 36 1/2 x 15. Swing over bed 9in. Swing over cross slide 5in. Distance between centers 19in. Spindle... Less
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Lathe Pulley Bushing - L3-109

$20.48
Sears Parts Direct Lathe Pulley Bushing - L3-109
+ $8.99 shipping
/lathe-pulley-bushing/1XweZG0t9uKngJHS5GW6mg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Choose this manufacturer- approved bushing for your lathe.Use this bushing to replace a bushing that allows your lathe to spin.The bushing works with your lathe's variable speed pulley and main pulley spindle. Plan to replace your lathe's spindle when repl
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/S0he5XLQ6foNIWfRrskJ6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

Lathe Gear - 3980-12

$92.99
Sears Parts Direct Lathe Gear - 3980-12
Free Shipping
/lathe-gear-398012/XRRcVCUsaalzi0WgMOu_bQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved gear (part number 3980-12) is for lathes.Gear 3980-12 meshes with other gears inside the lathe to turn the lathe shaft and spindle.Wear work gloves to protect your hands when installing this part.
More

Internal Lathe Threading...

$8.66
Banggood Internal Lathe Threading Boring Turning Tool with Blade for CNC Machine-Turning Tool
Free Shipping
/internal-lathe-threading/GSVCD59RnkrynDZ49sJWAQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: Internal Lathe Threading Boring Turning Tool with Blade for CNC Machine More 11NR A60/11IR A60 insert are supplied. Product ID: 1042198 Specification: Model SNR0010K11 Material chrome vanadium Shank diameter 10mm Overall length 125mm Direction Right Hand Accept Insert 11 NR/11 IR Wrench specification T8 Blade 11IR AG60 Package Included: 1 x Internal Lathe 1 x T8 wrench 1 x Blade More Details:
More

PTG Barrel Threading Lathe...

$35.99
MidwayUSA PTG Barrel Threading Lathe Bit Square 3/8
+ $4.99 shipping
/ptg-barrel-threading/-jxeTrUz_k3YwbqfwDf87g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The square bit cuts a true 10 threads per inch square thread for 03 Springfields and Enfields. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

JET 719203 Wood Lathe Bed...

$106.99
CPO Outlets JET 719203 Wood Lathe Bed Extension Stand
Free Shipping
/jet-719203-wood-lathe-bed/9_DS3f97-2iG-ycOdG7YHA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JWL-1221VS Wood Lathe Bed Extension Stand - 719203. Lathe Sold Seperately. Support the extension that gives the JET 1221VS lathe a full 43 in. of turning capacity
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/DUnMWiZv0-0xWBzE4Ysu5A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 5/16
+ $4.99 shipping
/ptg-barrel-threading/Tkvk0JCIBixp71RVbZ4Abg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

JET 719201 Wood Lathe Bed...

$214.99
CPO Outlets JET 719201 Wood Lathe Bed Extension
Free Shipping
/jet-719201-wood-lathe-bed/oswFZJvydiatZMHu9BGzWw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JWL-1221VS Wood Lathe Bed Extension - 719201. Lathe Sold Seperately. Extend the turning capacity of the JET 1221VS lathe to 43 in. for larger projects
More

PTG Barrel Threading Lathe...

$28.99
MidwayUSA PTG Barrel Threading Lathe Bit Lever Actions 3/8
+ $4.99 shipping
/ptg-barrel-threading/h54k0n3QrCqtCPKqfbP19A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The lever action cutter cuts the 12 threads per inch for Marlin lever guns and Remington Rolling blocks. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

Delta Midi-Lathe Modular Bed...

$155.89
Lowe's Delta Midi-Lathe Modular Bed Extension 46-463
Free Shipping
/delta-midilathe-modular/-dyxNYeAkrIg_XbpBukkFQ==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
Allows multiple extensions to be added to the Delta 46-455 and 46-460 midi lathes. Bed extension adds an additional 25. 5 of length between centers to accommodate longer turning applications.
More

Delta 46-462 Midi-Lathe Stand

$174.99
CPO Outlets Delta 46-462 Midi-Lathe Stand
Free Shipping
/delta-46462-midilathe/tmN-2wYovsCqBlL1G56Azg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Midi-Lathe Stand - 46-462. Delta Midi Lathe Stand Raises lathe to a more comfortable working position. Heavy duty, sturdy construction stands up to the rigors of the workshop
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410