Category

Sport and Outdoor

Narrow By...

Showing results for "headspace gauge"
Results 1 - 40 of 759

Clymer Field Headspace Gauges...

$29.00
Brownells Clymer Field Headspace Gauges - .308 Field Gauge
+ $7.95 shipping
/clymer-field-headspace/88o8XnK-tyNMzyVZhFN0zA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Field gauges are essential tools for ensuring a safe chamber on used rifles. Slightly longer then a No-Go gauge, the Field gauge is used to measure the absolute maximum allowable, safe chamber headspace. If the bolt closes on a No-Go gauge, the Field gauge is used for an additional check. If the bolt then closes on the Field gauge, the rifle is considered unsafe to shoot, you'll have to have the barrel set back and rechambered. Includes a durable, plastic storage case. Available for .308 and .30-06 caliber chamber lengths. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. .308 fits .243, .260, 7mm-08, .308, .338 Federal, and .358 Win. .30-06 fits .25-06, .270 Win, .30-06, 8mm-06, .338-06, and .35 Whelen.
More

Hornady Lock-N-Load Headspace...

$29.99
Brownells Hornady Lock-N-Load Headspace Gauge Tool - Hornady Lock-N-Load Headspace Kit Without Body
+ $7.95 shipping
/hornady-locknload/J8IQftcYXNxS4U8KNPe1tA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This affordable headspace gauge set from Hornady Lock-N-Load Products (formerly Stoney Point) allows the handloader to measure changes to the headspace of cartridges with a dial/digital caliper. Different bushing sizes (depending on cartridge family) insert into the Hornady Lock-N-Load Comparator Body, which attaches to a caliper. This handloader can then measure the changes between fired and sized brass. this enables the handloader to adjust his sizing dies for a proper fit in his chamber. When a handloader oversizes his cases it can cause excessive headspace problems, one of which is to shorten the life of the brass. The Hornady Lock-N-Load Headspace Gauge Set will allow the user t Mfg: Hornady
More

PTG Headspace No-Go Gauge 26...

$49.99
MidwayUSA PTG Headspace No-Go Gauge 26 Nosler
+ $4.99 shipping
/ptg-headspace-nogo-gauge/FXI_hOYezeO1cAiUX4Hhcw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a No Go Gage only, and both a Go Gage and a No Go Gage are required to properly headspace a barrel. These No Go Gages represent the upper limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage inserted, then the firearm may not be within acceptable maximum headspace dimensions and should be examined further by a knowledgeable gunsmith. Technical InformationMateri al: A2 Tool Steel Notes: Duplicates the maximum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be... Less
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, 300 Blackout Headspace Gauge
+ $7.95 shipping
/clymer-headspace-gauges/JVBLxZWLiQLfPiEqYTu5Cg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Clymer Field Headspace Gauges...

$29.00
Brownells Clymer Field Headspace Gauges - .30-06 Field Gauge
+ $7.95 shipping
/clymer-field-headspace/n-ShC9kGzcljpoZGS3Drrw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Field gauges are essential tools for ensuring a safe chamber on used rifles. Slightly longer then a No-Go gauge, the Field gauge is used to measure the absolute maximum allowable, safe chamber headspace. If the bolt closes on a No-Go gauge, the Field gauge is used for an additional check. If the bolt then closes on the Field gauge, the rifle is considered unsafe to shoot, you'll have to have the barrel set back and rechambered. Includes a durable, plastic storage case. Available for .308 and .30-06 caliber chamber lengths. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. .308 fits .243, .260, 7mm-08, .308, .338 Federal, and .358 Win. .30-06 fits .25-06, .270 Win, .30-06, 8mm-06, .338-06, and .35 Whelen.
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - 5.56 Go Gauge
+ $7.95 shipping
/forster-headspace-gauges/yNHhtBs0W5ywvh-savQwtg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Clymer Headspace Gauges - Go...

$30.00
Brownells Clymer Headspace Gauges - Go - Go, Magnum See Specs For Cartridges
+ $7.95 shipping
/clymer-headspace-gauges/fT2Dq2Ccdai1Aj4IqSzJTg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Clymer Headspace Gauges -...

$29.00
Brownells Clymer Headspace Gauges - No-Go - No Go, .30-06 See Specs For Cartridges
+ $7.95 shipping
/clymer-headspace-gauges/077xMsDUTOnpC4GWv2PzCQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Field, .30-06 See Specs For Cartridges
+ $7.95 shipping
/forster-headspace-gauges/4sNzXnmYlMmpjoHmWTJAqA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges - No...

$28.99
Brownells Forster Headspace Gauges - No Go, .30-06 See Specs For Cartridges
+ $7.95 shipping
/forster-headspace-gauges/Aw0a3vEZfjjOQYDy6KlgBw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, .30-06 See Specs For Cartridges
+ $7.95 shipping
/clymer-headspace-gauges/Xr-aXhgLpicYbD2sGgZ0qw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Clymer Headspace Gauges - Go...

$33.00
Brownells Clymer Headspace Gauges - Go - Go, 5.56 Nato
+ $7.95 shipping
/clymer-headspace-gauges/k_rqKPZOMyIfMe0pUb-h4A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

PTG Headspace No-Go Gage...

$49.99
MidwayUSA PTG Headspace No-Go Gage 6.5mm-06 A-Square Ackley Improved 40-Degree Shoulder
+ $4.99 shipping
/ptg-headspace-nogo-gage/uoswyxxRgz_zEUJQyB792A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a No Go Gage only, and both a Go Gage and a No Go Gage are required to properly headspace a barrel. These No Go Gages represent the upper limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage inserted, then the firearm may not be within acceptable maximum headspace dimensions and should be examined further by a knowledgeable gunsmith. Technical InformationMateri al: A2 Tool Steel Notes: Duplicates the maximum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be... Less
More

Forster Headspace Gauges - No...

$28.99
Brownells Forster Headspace Gauges - No Go, .223 Rem
+ $7.95 shipping
/forster-headspace-gauges/ZAQWUop463N7T5viN_6gpw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Go, .223 Rem
+ $7.95 shipping
/forster-headspace-gauges/a3mcqFYhcLm6rkLwWZggLA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Field, .223 Rem
+ $7.95 shipping
/forster-headspace-gauges/uRooL6JSJsymql55ux4sdQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - 7.62 Nato Maximum Chamber Gauge
+ $7.95 shipping
/forster-headspace-gauges/IQv2WvUCx2OVlIi9z13GlA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/pmAYn7kKnWzPy9-ueEuqzA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Clymer Go/No-Go Gauge Sets -...

$60.00
Brownells Clymer Go/No-Go Gauge Sets - .22 Lr Headspace Gauge Kit
+ $7.95 shipping
/clymer-gonogo-gauge/-WDpaj588EMzO1PrJv_lLg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Convenient kits contain “Go” and “No-Go” gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.
More

Clymer Go/No-Go Gauge Sets -...

$66.00
Brownells Clymer Go/No-Go Gauge Sets - .223 Rem. Headspace Gauge Kit
+ $7.95 shipping
/clymer-gonogo-gauge/kM9dtXCJLRDRaq9IQkii-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Convenient kits contain “Go” and “No-Go” gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.
More

Clymer Headspace Gauges -...

$29.00
Brownells Clymer Headspace Gauges - No-Go - No Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/TrGAqV9wmGQlFE5wBOxqQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Field, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/forster-headspace-gauges/Bov7M1WsW48ELAUhXEF_UQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Go, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/forster-headspace-gauges/d0GMx3wRW76QLj_8DoKCXw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Manson Precision Belted...

$30.00
Brownells Manson Precision Belted Magnum Cartridge Headspace Gauges - Go Gauge For Belted Magnum Cartridges
+ $7.95 shipping
/manson-precision-belted/MKa1BJtXUeJQQHa1m_m_qA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
With the exception of the .240 Weatherby Magnum, most belted, magnum cartridges are based on the .375 H&H Magnum case. Therefore, they all use the same headspace gauges. The following is a partial listing of those cartridges which use the same Belted Magnum Headspace Gauges: .257 Weatherby Mag., 6.5 Rem. Mag., .264 Win. Mag., .270 Weatherby Mag., 7mm Rem. Mag., 7mm Weatherby Mag., 7mm STW, .300 H&H Mag., .300 Weatherby Mag., .300 Win. Mag., .30-.338 Win. Mag., .308 Norma Mag., 8mm Rem., .338 Win. Mag., .340 Weatherby Mag., .350 Rem. Mag., .358 Norma Mag., .375 H&H Mag., .416 Rem. Mag., .458 Win. Mag.MIXING AND MATCHING BRANDS OF HEADSPACE GAUGES - Don't do it!! That's the short answer, Mfg: Manson Precision
More

Manson Precision Belted...

$30.00
Brownells Manson Precision Belted Magnum Cartridge Headspace Gauges - No Go Headspace Gauge For Belted Magnum Cartridges
+ $7.95 shipping
/manson-precision-belted/0yH5mc0FvNX1ABE4A6id-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
With the exception of the .240 Weatherby Magnum, most belted, magnum cartridges are based on the .375 H&H Magnum case. Therefore, they all use the same headspace gauges. The following is a partial listing of those cartridges which use the same Belted Magnum Headspace Gauges: .257 Weatherby Mag., 6.5 Rem. Mag., .264 Win. Mag., .270 Weatherby Mag., 7mm Rem. Mag., 7mm Weatherby Mag., 7mm STW, .300 H&H Mag., .300 Weatherby Mag., .300 Win. Mag., .30-.338 Win. Mag., .308 Norma Mag., 8mm Rem., .338 Win. Mag., .340 Weatherby Mag., .350 Rem. Mag., .358 Norma Mag., .375 H&H Mag., .416 Rem. Mag., .458 Win. Mag.MIXING AND MATCHING BRANDS OF HEADSPACE GAUGES - Don't do it!! That's the short answer, Mfg: Manson Precision
More

Clymer Go/No-Go Gauge Sets -...

$60.00
Brownells Clymer Go/No-Go Gauge Sets - 9mm Luger Headspace Gauge Kit
+ $7.95 shipping
/clymer-gonogo-gauge/zYtu77G4mPxD-3xkeddTrw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Convenient kits contain “Go” and “No-Go” gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.
More

Hornady Lock N Load Headspace...

$46.32
eBay Hornady Lock N Load Headspace Gauge Kit Hk66 090255704846
Free Shipping
/hornady-lock-n-load/469x_EYFwatU8pnGTxFLfQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Hornady Lock N Load Headspace Gauge Kit The Lock N Load headspace gauge is the best method we've found to extend brass life, improve accuracy and enhance safety. The gauge measures variations in your brass before and after firing or resizing. It allows for comparison between fire-formed brass from your gun and your re-sized brass. Any of five interchangeable bushing are attached to your caliper using the same body as found on our Comparator. This kit comes with five bushings that allow the user
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, .243 Win, .308 Win; .358 Win
+ $7.95 shipping
/clymer-headspace-gauges/mVuMwUIIY-Y3WHdTkxH-8A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Go, .243 Winchester, 7mm-08 Remington, .308 Winchester
+ $7.95 shipping
/forster-headspace-gauges/iYDJJieJ__CshUpWS-DBaw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Field, .243 Win; 7mm-08, .308/.243; .308 Win, .243-.308
+ $7.95 shipping
/forster-headspace-gauges/7NhAYefEUMkgDCj2nSMa4g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Forster Headspace Gauges - No...

$28.99
Brownells Forster Headspace Gauges - No Go, .243 Win; 7mm-08, .308/.243; .308 Win, .243-.308
+ $7.95 shipping
/forster-headspace-gauges/KpIkMvd-w2Ju-TSneKTGDw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Lyman Reloading 223 Case...

$25.00
eBay Lyman Reloading 223 Case Length/headspace Gauge
Free Shipping
/lyman-reloading-223-case/gxCxMUi0ThqCD_cddK5_aw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lyman Reloading 223 Case Length/Headspace Gauge Description Brand New. Lyman Reloading 223 Case Length/Headspace Gauge Material: Steel Weight: 8 oz / 226.79 g To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to in
More

Brownells 5.56mm Maximum...

$23.97
Brownells Brownells 5.56mm Maximum Headspace Gauge - Colt 5.56 Headspace Gauge
+ $7.95 shipping
/brownells-556mm-maximum/SNiyIqDrBrTMjU3-yAVkLg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Made to the Colt factory's special dimensions for M16/AR-15 rifles. It measures the maximum factory acceptable headspace; an essential check on guns that have seen extensive service or have been rebarreled. Mfg: Brownells SPECS: Hardened and ground steel. 1.65 (4.2cm) overall (this is NOT the headspace dimension). .3655 (9.3mm) diameter.
More

Lyman Reloading 30-06 Case...

$28.57
eBay Lyman Reloading 30-06 Case Length/headspace Gauge
Free Shipping
/lyman-reloading-3006/rxiFOmHyKvRtI0Uk8erPJw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lyman Reloading 30-06 Case Length/Headspace Gauge Other Hunting Reloading Equip To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable he
More

Lyman Case Length Headspace...

$21.49
MidwayUSA Lyman Case Length Headspace Gage 30-06 Springfield
+ $4.99 shipping
/lyman-case-length/gW34sIfr5zSN_wBm97HoiA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Case Length Headspace Gage is perfect for reloaders looking to achieve the highest degree of safety and accuracy. Lyman recommends that all cases be inspected after resizing to ensure that the proper headspace dimension is maintained. Simply insert the case into the gage to check that it does not exceed the maximum or fall below the minimum allowable headspace. If the case exceed the maximum allowable case length the case mouth will exceed the length of the gage. Technical Information Material: Steel Features: Quickly identifies cases that fall above or below allowable headspace Notes: Also checks for cases that exceed the maximum allowable case length
More

Lyman Reloading 223 Case...

$25.10
eBay Lyman Reloading 223 Case Length/headspace Gauge, Free Shipping,
Free Shipping
/lyman-reloading-223-case/s9VBgoOiecjgLUsAC1avRg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lyman Reloading 223 Case Length/Headspace Gauge CLICK TO ENLARGE Lyman Reloading 223 Case Length/Headspace Gauge DESCRIPTION This is a brand new: Lyman Reloading 223 Case Length/Headspace Gauge To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply in
More

Lyman Case Length Headspace...

$21.49
MidwayUSA Lyman Case Length Headspace Gage 22-250 Remington
+ $4.99 shipping
/lyman-case-length/rPefWTGKfv3RNwwvk9V6mw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Case Length Headspace Gage is perfect for reloaders looking to achieve the highest degree of safety and accuracy. Lyman recommends that all cases be inspected after resizing to ensure that the proper headspace dimension is maintained. Simply insert the case into the gage to check that it does not exceed the maximum or fall below the minimum allowable headspace. If the case exceed the maximum allowable case length the case mouth will exceed the length of the gage. Technical Information Material: Steel Features: Quickly identifies cases that fall above or below allowable headspace Notes: Also checks for cases that exceed the maximum allowable case length
More

Lyman Reloading 223 Case...

$25.01
eBay Lyman Reloading 223 Case Length/headspace Gauge
Free Shipping
/lyman-reloading-223-case/tlyV9ScX3XM8DM_K6yu1Eg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lyman Reloading 223 Case Length/Headspace Gauge Need it faster? Get 2-Day Shipping for $2.99 or 1-Day Shipping for just $6.99! Description To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does no
More

PTG Headspace No-Go Gage 22...

$41.56
MidwayUSA PTG Headspace No-Go Gage 22 Long
+ $4.99 shipping
/ptg-headspace-nogo-gage/1ub1DL2cEHlibro1Wa3wZw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a No Go Gage only, and both a Go Gage and a No Go Gage are required to properly headspace a barrel. These No Go Gages represent the upper limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage inserted, then the firearm may not be within acceptable maximum headspace dimensions and should be examined further by a knowledgeable gunsmith. Technical InformationMateri al: A2 Tool Steel Notes: Go Gage: Ascertains correct headspace dimensions by duplicating the minimum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to... Less
More

Lyman Reloading 223 Case...

$24.70
eBay Lyman Reloading 223 Case Length/headspace Gauge
Free Shipping
/lyman-reloading-223-case/x3yYwA2FQs-nMgOv3Te5fA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lyman Reloading 223 Case Length/Headspace Gauge Other Hunting Reloading Equip To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable head
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews.on-30371
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews.on-30371