D10 Mini Car Vehicle Location Trace Terminal GPS Device D10 Vehicle GPS Locating Tracker: Locating or positioning the vehicle GPS positing To edit a command SMS DW, send to the device SIM...
D10 Mini Car Vehicle Location Trace Terminal GPS Device D10 Vehicle GPS Locating Tracker: Locating or positioning the vehicle GPS positing To edit a command SMS DW, send to the device SIM card mobile number, then receive a reply SMS. Positioning via longitude and latitude To edit a command SMS JW, send to device SIM card mobile number, then receive SMS. Track by time interval User can track the vehicle by interval. Selectable period of time is 1 - 99 hours, the hours should be integer. To edit a SMS DSDW number of hours send to the device SIM card mobile number, then receive SMS time interval tracking is set successfully, then the user will regularly receive the positioning information. Electronic fence User can set up electronic fend around the vehicle, the focal point of the fence is the location of the vehicle. Remote control User can monitor and control the target vehicles remotely by authorized phone, such as, set it into the status of alarm or remove the alarm, or to sent an order to cut off oil and power of the vehicle. ( This function, please refer to factory setting ) Basic function of the device External power supply failure alarm ( only for device with internal battery) when the external power supplier cut, the device will send SMS to control number. External power supply, please note. Low voltage alarm When the voltage lower than 3.4V, the device will send SMS to control number Battery low voltage, please charge the battery. Bind area compensation record While the GPS locating normally, but bad GSM signal, the device might lose connect with the server. In this case, the device will store the GPS data ( at most 5000 location data ) as long as the device get connect with the server, the device will uploaded the stored location data to the server, to compensate the bind area. Type: Tracker, GPS Model : D10 Network : GSM, GPRS Voltage Range : 6 - 30V DC Languages Support : Simplified Chinese, English Computer network platform User can lo onto computer network: http://www.slwgps. com, choose D series smart terminal to operate. The first time user to log onto the website platform should be change the password in time. Real time tracking Click tracking to open the vehicle list, select the vehicle you wound like to click, then can get the vehicle into. Track of the past record ( to check to recent 3 months vehicle moving into. Can also derive excel sheet. Click the control area to set and check the recent 3 months vehicle moving info. Multiple vehicle tracking ( tracking four vehicles once ) E-fence simple control zone Can be set up to control vehicle into and out of alarm area, it will send alarm SMS once vehicle into or out of the area. Mobile APP function The user can also use APP to manage the vehicle, besides SMS. 1. Positioning real-time tracking, pass record checking. 2. Remote control: Remote fuel / power cut, or fuel / power on, set or remove anti-theft alarm. 3. Vehicle maintenance: Can set up vehicle maintenance, driving license expiring alarm, then device will inform user in advance. 4. Vehicle query: User can query the vehicle driving mileage, alarm information, etc. Installation: 1. The main body of the device can be installed inside any hidden location of the vehicle ( in case of rain ). 2. While installing, please make sure that the main body is positive upward and no iron object is allowed to be on the top, the recommended installation location is A and B in the below pictures. 3. The red line of the power cord should be connected to the positive electrode of the vehicle's permanent power supply, and the black line connected to the negative one. Recommended position: The ignition switch box or fuse box. 4. Install the system of remote fuel / power off: Please cut off the petrol pump's positive pole, and connect the closed contact of relay to the gasoline electronic of accessory to the two ends. While the power cord of the relay must be connected to the green line and black line. ( This is an optiona